m204wiki - User contributions [en]

SNAPFAIL parameter

2017-09-26T23:37:17Z

DVRICKP:

{{Template:SNAPFAIL parameter subtitle}}
==Summary==
<dl>
<dt>Default value
<dd>0
<dt>Parameter type
<dd>System
<dt>Where set
<dd>View-only
<dt>Related products
<dd>All
<dt>Introduced
<dd><var class="product">Model 204 V7.1</var>
</dl>

==Description==
Number of times a [[Storing_diagnostic_information_(CCASNAP)|CCASNAP]] has failed.If CCASNAP cannot be successfully opened, SNAPFAIL will not be incremented.
[[Category:System parameters]]
[[Category:Parameters]]

ONLINE monitoring

2016-05-24T19:32:08Z

DVRICKP:

You can monitor the status and performance of an ONLINE system, including SNA Communications Server interfaces, with the MONITOR command. See [[MONITOR command]] for complete command syntax.


MONITOR provides a series of formatted or unformatted displays of system and user statistics about all or a selected set of active users. You can update the displays on a periodic basis, but do not update them more frequently than every five seconds. 

==Unformatted displays==

Unformatted displays show all the nonzero cumulative system or user statistics in a format similar to that provided in the journal: 

<ul>
<li> Series of terms appears in name=value format.</li>

<li> Journal header is not displayed.</li>

<li> Each user is identified by user number.</li>

<li> Account name appears at the beginning of the user's display.
</li>
</ul>

==Formatted displays==

Formatted displays show basic system information, followed by specified user information in labelled columns. 


Basic system information includes the number of:

<ul>
<li> Active users (USR)</li>

<li> Active servers (SVR)</li>

<li> Open buffers (BUF)</li>

<li> Open files (FLS) </li>

<li> A file open as part of one or more permanent groups is followed by an asterisk (*).</li>

<li> Two pound signs (##) indicate that the user has more files open than can fit into the internal buffer used to hold open file names.</li>

<li> System percentage of CPU time (PCPU).</li>

<li> Statistics from the last system performance line written to the journal. If performance monitoring is active and performance lines are being written to the journal, all statistics are shown. Otherwise, only open buffers, open files, and system PCPU are shown.
</li>
</ul>


Specified user information is described in the next section.

==User information in formatted displays==

User information is viewable in the following types of formatted displays:

<ul>
<li> Basic display (default)</li>

<li> User since-last statistics</li>

<li> User performance data</li>

<li> Open files
</li>
</ul>


The following sections describe these types of formatted displays.

===Basic display===

USER SVR USERID P CUR SLICE AGE FUNC CNCT CPU SEQIO QUE WT FLGS
0 SAM S 48 0.075 0 0.041 3 BLKO 04 40
1 1 MARY S 49 0.075 EVAL 266 0.152 36 REDY


Where:

<ul>
<li>USER is the user number.</li>
<li>SVR is the server number.</li>
<li>USERID is the user ID.</li>
<li>P is user priority (P).</li>
<li>CUR is current priority.</li>
<li>SLICE is current CPU time slice.</li>
<li>AGE is user pre-aged priority.</li>
<li>FUNC is the last function to set the since-last parameter.</li>
<li>CNCT is connect time.</li>
<li>CPU is CPU time.</li>
<li>SEQIO is the sequential I/O operations performed.</li>
<li>QUE is the [[#QUE values|current scheduler queue]]</li>
<li>WT is the [[#Wait type values|user wait type]].</li>
<li>FLGS is the sum of the [[#Status flag values|status flag values]]</li>
</ul>

====QUE values====
<table>
<tr class="head">
<th>

QUE value 
</th>
<th>

Means user is...
</th>
</tr>

<tr>
<td>

RUNG 
</td>
<td>

Running.
</td>
</tr>

<tr>
<td>

BLKI 
</td>
<td>

Blocked in server.
</td>
</tr>

<tr>
<td>

OFFI 
</td>
<td>

Blocked in server, invisible to the scheduler.
</td>
</tr>

<tr>
<td>

BLKO 
</td>
<td>

Blocked out of server.
</td>
</tr>

<tr>
<td>

OFFO 
</td>
<td>

Blocked out of server, invisible to the scheduler .
</td>
</tr>

<tr>
<td>

WTSV 
</td>
<td>

Waiting for server.
</td>
</tr>

<tr>
<td>

REDY 
</td>
<td>

Ready or running.
</td>
</tr>

<tr>
<td>

SWPG 
</td>
<td>

Being swapped in or out.
</td>
</tr>

<tr>
<td>

WTUS 
</td>
<td>

Inactive.
</td>
</tr>
</table>

====Wait type values====
<table>
<tr class="head">
<th>

Flag
</th>
<th>

Description
</th>
</tr>

<tr>
<td>

00
</td>
<td>

Unspecified.
</td>
</tr>

<tr>
<td>

01
</td>
<td>

Disk I/O.
</td>
</tr>

<tr>
<td>
02
</td>
<td>

Sequential user I/O — output.
</td></tr>

<tr>
<td>
03
</td>
<td>

Sequential user I/O — input.
</td></tr>

<tr>
<td>
04
</td>
<td>

Operator's console input (WTOR).
</td></tr>

<tr>
<td>
05
</td>
<td>
Restore reads (BSAM).
</td></tr>

<tr>
<td>

06
</td>
<td>

Dump writes (BSAM). 
</td></tr>

<tr>
<td>
07
</td>
<td>
Enqueue waits (record or noncritical resource).
</td></tr>

<tr>
<td>
08
</td>
<td>

Buffer waits.
</td></tr>

<tr>
<td>
09
</td>
<td>
Wait almost forever (deactivated user).
</td></tr>

<tr>
<td>
10
</td>
<td>
Waits for a pseudo subtask, or waits for reactivation (hung terminal).
</td></tr>

<tr>
<td>
11
</td>
<td>
Waits for an IFAM2 or IFAM4 call.
</td></tr>

<tr>
<td>
12
</td>
<td>
Waits for a wakeup.
</td></tr>

<tr>
<td>
13
</td>
<td>
Server I/O.
</td></tr>

<tr>
<td>
15
</td>
<td>
Writes to the journal data set, CCAJRNL.
</td></tr>

<tr>
<td>
16
</td>
<td>
Checkpoint writes to CHKPOINT data set.
</td></tr>

<tr>
<td>
17
</td>
<td>
Waits for check on previous write.
</td></tr>

<tr>
<td>
18
</td>
<td>
Waits for a checkpoint DECB to free up or waiting for multiuser output arbitration.
</td></tr>

<tr>
<td>
19
</td>
<td>
Waits for a checkpoint request.
</td></tr>

<tr>
<td>
20
</td>
<td>
Waits for a checkpoint completion.
</td></tr>

<tr>
<td>
21
</td>
<td>
Wait forever (dead user).
</td></tr>

<tr>
<td>
22
</td>
<td>
VSAM or sequential file input.
</td></tr>

<tr>
<td>
23
</td>
<td>
User waiting due to excessive login failures.
</td></tr>

<tr>
<td>
24
</td>
<td>
Waits for exclusive control of critical file resource.
</td></tr>

<tr>
<td>
25
</td>
<td>
Waits for share control of critical file resource.
</td></tr>

<tr>
<td>
26
</td>
<td>
Waits for SNA Communications Server buffer, input or output.
</td></tr>

<tr>
<td>
27
</td>
<td>
Waits for interprocess input.
</td></tr>

<tr>
<td>
28
</td>
<td>
Waits for interprocess output.
</td></tr>

<tr>
<td>
29
</td>
<td>
User waiting for the security interface.
</td></tr>

<tr>
<td>
30
</td>
<td>
User(s) waiting, with <code>$Wait(nn,'SWAP')</code>, for a user-defined ECB to be posted by a <var>$Post</var> function from a different user.
</td></tr>

<tr>
<td>
31
</td>
<td>
User(s) waiting, with <code>$Wait(nn,'NOSWAP')</code>, for a user-defined EDB to be posted by a <var>$Post</var> function from a different user.
</td></tr>

<tr>
<td>
32
</td>
<td>
User waiting for DB2 subtask.
</td>
</tr>

<tr>
<td>
33-36
</td>
<td>
Reserved for future development.
</td>
</tr>

<tr>
<td>
37
</td>
<td>
User waiting for recovery to complete.
</td>
</tr>

<tr>
<td>
38
</td>
<td>
Reserved for future development.
</td>
</tr>

<tr>
<td>

39
</td>
<td>
Reserved for future development.
</td>
</tr>

<tr>
<td>

40
</td>
<td>
Waiting for an MQSeries subtask to become available.
</td>
</tr>

<tr>
<td>

41
</td>
<td>
Waiting for a MQ subtask to run.
</td>
</tr>

<tr>
<td>

42
</td>
<td>
MQSeries MQGET operations with wait time specified.
</td>
</tr>

<tr>
<td>

43
</td>
<td>
ECF to load or delete a module. 
</td>
</tr>

<tr>
<td>
44
</td>
<td>
External module to become free. 
</td>
</tr>

<tr>
<td>
45
</td>
<td>
ECF subtask to become free.
</td>
</tr>

<tr>
<td>
46
</td>
<td>
External module to run.
</td>
</tr>

<tr>
<td>
47
</td>
<td>
User(s) waiting, with <code>$Wait('CPQZ')</code>, for the extended quiesce ECB to be posted by the successful completion of a <var class="product">Model 204</var>, system-wide checkpoint.
</td>
</tr>

<tr>
<td>
48
</td>
<td>
User(s) waiting, with <code>$Wait('QZSIG')</code>, for the end of extended quiesce.
</td></tr>

<tr>
<td>
49
</td>
<td>
User(s) waiting, at end of extended quiesce, for count of <code>$Wait('CPQZ')</code> and <code>$Wait('QZSIG')</code> users to go to zero.
</td></tr>

<tr>
<td>
50
</td>
<td>
User is waiting for HSM to recall an archived data set.
</td></tr>

<tr>
<td>
51
</td>
<td>
User is waiting for a share lock on the internal constraints database. 
The constraints database is used to ensure that there is sufficient space on table B pages and in table D to be able to back out active transactions as needed.
</td></tr>

<tr>
<td>
52
</td>
<td>

User is waiting for an exclusive lock on the internal constraints database. 

The constraints database is used to ensure that there is sufficient space on table B pages and in table D to be able to back out active transactions as needed.
</td></tr>

<tr>
<td>
53
</td>
<td>
User is waiting for a subtransaction checkpoint to complete.
</td></tr>

<tr>
<td>
54
</td>
<td>
Checkpoint PST waiting on a blocking file update to complete to try to do a transaction checkpoint.
</td></tr>

<tr>
<td>
55
</td>
<td>
Checkpoint PST doing a timed wait to try to do a transaction checkpoint.
</td></tr>

<tr>
<td>
56
</td>
<td>
Checkpoint PST waiting on users to complete subtransactions.
</td></tr>

<tr>
<td>
80-89
</td>
<td>
Customer (site-specific) wait types.
</td></tr>

<tr>
<td>
97
</td>
<td>
Waiting for a Fast/Unload request running in a real subtask.
</td></tr>

<tr>
<td>
98
</td>
<td>
In a <var>[[MAXAUSER parameter|MAXAUSER]]</var> wait.
</td></tr>

<tr>
<td>
99
</td>
<td>
Waiting for a <var>[[SIRFACT command|SIRFACT QUIESCE]]</var> to be completed (with a <var>SIRFACT RESUME</var>).
</td></tr>
</table>

====Status flag values====
<table>
<tr class="head">
<th>

Flag
</th>
<th>

Description of wait...
</th>
</tr>

<tr>
<td>

40
</td>
<td>

User's wait is swappable. If another user needs this user's server area, the waiter may be written out.
</td>
</tr>

<tr>
<td>

20
</td>
<td>

User is waiting for an internal ECB (that is, the ECB is posted only by <var class="product">Model 204</var>, not by the operating system). 
</td>
</tr>

<tr>
<td>

8
</td>
<td>

More than one user is allowed to wait for the ECB that this user is waiting for. 
</td>
</tr>

<tr>
<td>

4
</td>
<td>

User can be bumped.
</td>
</tr>

<tr>
<td>

2
</td>
<td>

User can be interrupted with an urgent message.
</td>
</tr>

<tr>
<td>

1
</td>
<td>

A time limit was specified for the user's wait.
</td>
</tr>
</table>

===User since-last statistics===

User since-last statistics (SL option) show current activity.


If the user is between activities or performing an activity that does not initialize since-last statistics, the display is cumulative.


Statistics displayed are CPU, DKRD, DKWR, UDD, OUT, SLIC, FINDS, RECDS, PCPU, RQTM, SUBSYSTEM, PROC-FILE, PROC, and the pseudo subtask's user ID, account name, and user number. (Refer to the [[#Description of statistics|Statistics with descriptions]] table for statistic definitions, and to [[#Pseudo subtasks|Pseudo subtasks]].) 

===User performance data===

The PERFORMANCE option shows data last written to the journal. The following information is included:

<ul>
<li> Number of samples used to compute percentages</li>

<li> percentage of time the user is in each of the scheduler queues</li>
</ul>


See [[#Priority scheduling|Priority scheduling]].

===Open files===

This display is a list of files a user has open.

==MONITOR examples==

These examples show several variations of the MONITOR command.


The following command specifies a single nonrepeating formatted display of basic information for the system and all active users:

MONITOR


The following MONITOR ACTIVE command specifies a single nonrepeating formatted display of basic information for the system and active users, excepting OFFQ users. OFFQ is a state-of-queue status meaning that the Scheduler does not have to evaluate those users not in the queue. This command is used to reduce the amount of terminal output.

MONITOR ACTIVE


The following commands specify a display of the cumulative system statistics, which is updated every minute:

MONITOR STATISTICS 60
MONITOR STAT EVERY 60
MONITOR SYSTEM STATISTICS 60


The following command specifies a single display of the cumulative user statistics for users 1, 3, and 5, if they are active:

MONITOR (1,3,5) STATISTICS


The following commands specify a single formatted display of basic system information and basic, since-last, performance, and file information for each active user. Pseudo subtask's user ID, account name, and user number are displayed for SL (since-last) statistics:

MONITOR ALL
MONITOR USERS ALL
MONITOR BASIC SL PERFORMANCE FILE
MONITOR SL FILE PERF


The following commands specify a display of basic formatted information for the system and users 1, 2, 5, and 7, if they are active. The display is repeated continually 75 seconds after it completes. The user must press Enter to display the refreshed version, or enter *CANCEL to terminate the display:

MONITOR (1,2,5,7) 75
MONITOR (1,2,5,7) BASIC EVERY 75


The following command specifies an unformatted display of the following information:

<ul>
<li> Number of active users</li>

<li> Number of compactions of the record locking table</li>

<li> Current number of bytes used in the record locking table</li>

<li> Current high-water mark for the number of bytes used in the record locking table</li>

<li> Current number of headers used in the record locking table</li>

<li> Current high-water mark for the number of headers used in the record locking table</li>

<li> Required LRETBL setting (high-water mark) for the current system load</li>
</ul>

MONITOR ENQ


The following command specifies a formatted display of the number of pages from tables of each file that are currently located in the disk buffers: 

MONITOR DISKBUFF


The following command specifies information about SNA Communications Server's use of output buffers and waits for threads:

MONITOR VTAM


==MONITOR LINK example==


The following command specifies information about a network entity:

MONITOR LINK HEADQTRS


For more information about the MONITOR command for network monitoring, see <var class="product">Model 204</var> Horizon: Intersystem Processing.


In this example, HEADQTRS is the specified network entity for which the Online system operation is being monitored. The following statistics are provided:

 LOCAL ID MAXSES BNDSES IBWTS OBWTS CONVS FLGS TRAN/PROTO
-------- ------ ------ ----- ----- ----- ---- ----------
BOSTACB 4 2 0 0 2 A VTAM/LU62

USER PROCESS SENDS RECVS FLGS PROCESSGRP
----- -------- ----- ----- ---- ----------
3 PROCESS1 5 4 BI DENVER OBSOLETE
4 PROCESS1 5 4 BI DENVER


Where:

<ul>
<li> LOCAL ID is the SNA Communications Server ACB name (BOSTACB).</li>

<li> MAXSES is the maximum number of sessions allowed on this link (4).


The limit is established by the SESSIONS parameter of the DEFINE LINK command.

<li> BNDSES indicates the number of currently bound sessions (2).</li>

<li> IBWTS indicates the number of input buffer waits (0) by inbound conversations.


The input buffer availability is controlled by the actual number of input buffers established by the INBUFNO parameter of the DEFINE LINK command. An input buffer is used on the inbound side when a conversation is being established. If IBWTS is high, and you observe delays while opening inbound processes, then increase INBUFNO.</li>

<li> OBWTS indicates the number of output buffer waits (0).


Note: OBWTS is always zero when the communication protocol is
LU 6.2 (output buffers are not used).</li>

<li> CONVS indicates the number of active conversations (2).</li>

<li> FLGS indicates the status of the link status (A). Possible values for FLGS are:

<table class="thJustBold">
<tr><th>A</th> <td>Active</td></tr>

<tr><th>S</th> <td>Stopped</td></tr>

<tr><th>C</th> <td>Closed</td></tr>
</table></li>

<li> TRAN indicates the transport mechanism: SNA Communications Server or terminal (TERM). In this case TRAN is SNA Communications Server. </li>

<li> PROTO indicates the communication protocol (LU 6.2). Possible values for PROTO are:

<table class="thJustBold">
<tr><th>MSTR</th> <td>Master (for TPROCESS)</td></tr>

<tr><th>XFER</th> <td>Transfer (for TPROCESS)</td></tr>

<tr><th>IMS61</th> <td>IMS LU 6.1</td></tr>

<tr><th>LU 6.2</th> <td>LU 6.2 </td></tr>
</table>


The second line of statistics is a detail line for each bound session.

<ul>
<li> USER provides the external user number (3, 4). A blank occurs if a conversation is not active.</li>

<li> PROCESS indicates the process name (PROCESS1). If a conversation is not active, a blank appears.</li>

<li> SENDS indicates the number of physical sends for each conversation
(5, 5).</li>

<li> RECVS indicates the number of physical receives for each conversation
(4, 4).</li>

<li> FLGS indicates the status of the session (BI, BI). The session status flags are:
<table class="thJustBold">
<tr><th>B </th>
<td>bound </td>
</tr>

<tr>
<th>F </th>
<td>first speaker </td>
</tr>

<tr>
<th>I </th>
<td>inbound </td>
</tr>

<tr>
<th>O </th>
<td>outbound </td>
</tr>

<tr>
<th>L </th>
<td>local bid in progress </td>
</tr>

<tr>
<th>R </th>
<td>remote bid accepted </td></tr>
</table></li></ul>

<li> PROCESSGRP provides the process group name (DENVER). In this example, user 3 is running with an OBSOLETE process group: the process group was stopped and a DEFINE PROCESSGROUP command was issued to change the process group definition for subsequent usage. User 4 is running with the most recent version of the process group definition. </li>
</ul>

==MONITOR PROCESSGROUP example==

The following command specifies reports concerning a specific process group:

MONITOR PROCESSGROUP 


In this example, two PROCESSGROUP reports are produced. The first report is for an active conversation. The second report reflects the stopping and redefinition of the active conversation, which is allocated to another conversation (OBSOLETE with the same process name). Until the conversation with the obsolete process group ends, separate reports are produced for each process group to reflect the more current set of attributes.

 MONITOR PROCESSGROUP DENVER

LINKNAME REMOTEID BNDSES INCONVS OTCONVS FLGS
-------- -------- ------ ------- ------- ----
HEADQTRS DENVACB 2 1 0 A

USER PROCESS SENDS RECVS FLGS
----- -------- ----- ----- ----
4 PROCESS1 5 4 BI

MONITOR PROCESSGROUP DENVER

LINKNAME REMOTEID BNDSES INCONVS OTCONVS FLGS
-------- -------- ------ ------- ------- ----
HEADQTRS DENVACB 2 1 0 AX

USER PROCESS SENDS RECVS FLGS
----- -------- ----- ----- ----
3 PROCESS1 5 4 BI


Where:

<ul>
<li><var>LINKNAME</var> names the associated link (<code>HEADQTRS</code>).</li>

<li><var>REMOTEID</var> provides the Remote LU name (<code>DENVACB</code>).</li>

<li><var>BNDSES</var> indicates the number of bound sessions (2).</li>

<li><var>INCONVS</var> indicates the number of active inbound conversations (1).</li>

<li><var>OTCONVS</var> indicates the number of active outbound conversations (0).</li>

<li><var>FLGS</var> indicates the status of the processgroup (<code>A</code>). The processgroup status flags are:
<table class="thJustBold">
<tr>
<th>A </th>
<td>Active </td>
</tr>

<tr>
<th>S </th>
<td>Stopped </td>
</tr>

<tr>
<th>X </th>
<td>Obsolete </td>
</tr>
</table></li>
</ul>


The second line of statistics is a detail line for each active conversation.

<ul>
<li><var>USER</var> indicates the external user number (4).</li>

<li><var>PROCESS</var> provides the name of the program as it is known to network users (<code>PROCESS1</code>).</li>

<li><var>SENDS</var> indicates the number of physical sends (5).</li>

<li><var>RECVS</var> indicates the number of physical receives (4).</li>

<li><var>FLGS</var> indicates the status of the session status (<code>BI</code>). Status flags are:
<table class="thJustBold">
<tr>
<th>B </th>
<td>Bound </td>
</tr>

<tr>
<th>F </th>
<td>First speaker </td>
</tr>

<tr>
<th>I </th>
<td>Inbound </td>
</tr>

<tr>
<th>O </th>
<td>Outbound </td>
</tr>
</table></li>
</ul>

==MONITOR PROCESS example==

The following command specifies information about a particular process:

MONITOR PROCESS PROCESS1


In this example, two inbound conversations invoked from PROCESSGROUP DENVER (users 3 and 4) are in progress with the process named <code>PROCESS1</code>. The conversation ID (CID) that was assigned in the SOUL <var>OPEN PROCESS</var> statement is <code>PROGRAM1</code>.

MONITOR PROCESS PROCESS1

USER CID PROCESSGRP STARTED SENDS RECVS FLGS STATE
----- -------- ---------- ----------- ----- ----- ---- ------
3 PROGRAM1 DENVER 88349135723 5 4 BI RECV
4 PROGRAM1 DENVER 88349135803 5 4 BI RECV

<ul>
<li><var>USER</var> indicates the external user number (<code>3</code>, <code>4</code>).</li>

<li><var>CID</var> provides the conversation ID (<code>PROGRAM1</code>).</li>

<li><var>PROCESSGRP</var> indicates the name of the processgroup (<code>DENVER</code>).</li>

<li><var>STARTED</var> provides the Julian date and time the conversation began (<code>88349</code> and <code>13:57:23</code>).</li>

<li><var>SENDS</var> indicates the number of physical sends (<code>5</code>, <code>5</code>).</li>

<li><var>RECVS</var> indicates the number of physical receives (<code>4</code>, <code>4</code>).</li>

<li><var>FLGS</var> indicates the status of the session (<code>BI</code>). Status flags are:
<table class="thJustBold">
<tr>
<th>

B
</th>
<td>

Bound
</td>
</tr>

<tr>
<th>

F
</th>
<td>

First speaker
</td>
</tr>

<tr>
<th>

I
</th>
<td>

Inbound
</td>
</tr>

<tr>
<th>

O
</th>
<td>

Outbound 
</td>
</tr>
</table></li>

<li><var>STATE</var> indicates the state of the conversation (<code>RECV</code>). Conversation states can be:

:ACCEPT
:CLOSE
:CONFCLS
:CONFIRM
:CONFSND
:INITIAL
:RECV
:SEND
</li>
</ul>

==MONITOR DISKBUFF example==

You can use the <var>[[MONITOR command: Disk buffers|MONITOR DISKBUFF]]</var> commands to analyze the buffer pool utilizations:

<ul>
<li><var>MONITOR DISKBUFF</var> output shows buffer usage combining above and below the bar buffers.</li>

<li><var>MONITOR DISKBUFFG</var> output shows buffer pool usage for only above the bar buffers.</li>

<li><var>MONITOR DISKBUFFL</var> output shows buffer pool usage for only below the bar buffer usage.</li>
</ul>


Use these commands throughout the day across varied types of daily and event processing to evaluate your buffer allocations.

===Using MONITOR DISKBUFF commands===

You can see the types of pages that are in your buffer pools at any point in time using the <var>MONITOR DISKBUFF</var> command. The output of this command displays the types of pages that are in buffers and how many of each type.

MONITOR DISKBUFF

FILENAME FCT TBLA TBLB TBLC TBLD TBLE TBLX *TOTAL*
-------- --- ------ ------ ------ ------ ------ ------ -------
CCATEMP 0 40 0 0 0 0 0 40
PROC1 1 0 0 0 11 0 0 12
FILETBLX 1 1 10 0 2 0 2 16
TESTZ 1 1 11 0 3 185 0 201
*TOTAL* 3 42 21 0 16 185 2 269


[[Category:System management]]
[[Category:Model 204 operational issues]]

DISPLAY MODMAP command

2015-08-27T14:13:51Z

DVRICKP:

==Summary==
<dl>
<dt>Privileges
<dd>System manager
<dt>Function
<dd>Displays displays the <var class="product">Model 204</var> link map in address order
</dl>

==Syntax==
DISPLAY MODMAP [pattern]
DISPLAY MODMAP UEX

Where
<var class="term">pattern</var> is a simple pattern that limits the number of csects displayed. A simple pattern is
a character string with no wildcard or special characters. Any csect name matching the pattern is displayed.
<li>UEX displays the entry point addresses of all defined user exits.

==Usage notes==
<ul>
<li>The listing produced by <var>DISPLAY MODMAP</var> is identical to that produced in a CCASNAP, except <var>DISPLAY MODMAP</var> shows only one column's worth of csect names.

<li>The <var>DISPLAY MODMAP</var> output column layout is as follows:
address.length name version date-time-of-assembly

<li><var>DISPLAY MODMAP</var> is available as of version 7.5 of <var class="product">Model 204</var>.
<li><var>DISPLAY MODMAP UEX</var> is available as of version 7.7 of <var class="product">Model 204</var>.
</ul>

==Example==
<code>DISPLAY MODMAP FUN</code> displays only those csect names starting with <code>FUN</code>:
MODULE LINK MAP BY ADDRESS
------.---- FUNA
------.---- FUNM
------.---- FUNS
------.---- FUNX
------.---- FUNY
------.---- FUNZ
------.---- FUNL
------.---- FUNU1
------.---- FUNU2
------.---- FUNU3
2F34C2A8.0B30 FUNB 7.5.0G 2013-10-07 07:40
2F34CDD8.5C30 FUNC 7.5.0G 2013-10-11 07:48
2F352A08.17D0 FUND 7.5.0G 2013-10-07 07:40
2F3541D8.3C48 FUNE 7.5.0G 2013-10-07 07:40
2F357E20.4F30 FUNF 7.5.0G 2013-10-07 07:40
2F35CD50.04A8 FUNG 7.5.0G 2013-10-07 07:40
2F35D1F8.0208 FUNP 7.5.0G 2013-10-07 07:40
2F35D400.4498 FUNR 7.5.0G 2013-10-07 07:40
2F361898.A010 FUNT 7.5.0G 2013-10-22 14:29
2F36B8A8.05B8 FUNU 7.5.0G 2013-10-07 07:40
2F36BE60.0C70 FUNV 7.5.0G 2013-10-07 07:40
2F36CAD0.1A08 FUNW 7.5.0G 2013-10-07 07:40


<code>DISPLAY MODMAP UEX</code> displays the entry point addresses of all defined user exits:
USER EXIT MAP
------.---- JANACLFI
------.---- JANACLFO
------.---- CUSTINIT
------.---- CUSTTERM
------.---- CUSTINI0
------.---- CUSTINI1
------.---- CUSTINI2
------.---- CUSTRSTR
------.---- CUSTLOGO
------.---- CUSTOPRC
------.---- UHDRXT
------.---- IEFSD095
------.---- UUPUSRA
------.---- UUPUSRF
------.---- UUPUSRS
------.---- NCRYPXIT
------.---- MERGEJ
------.---- UPLVLUSR
------.---- TLOG
------.---- DDLPRIV
------.---- DMLPRIV
------.---- M204JLOG
------.---- M204CKPX


[[Category:Commands]]

DISPLAY MODMAP command

2015-08-27T14:11:44Z

DVRICKP:

==Summary==
<dl>
<dt>Privileges
<dd>System manager
<dt>Function
<dd>Displays displays the <var class="product">Model 204</var> link map in address order
</dl>

==Syntax==
DISPLAY MODMAP [pattern]
DISPLAY MODMAP UEX

Where
<var class="term">pattern</var> is a simple pattern that limits the number of csects displayed. A simple pattern is
a character string with no wildcard or special characters. Any csect name matching the pattern is displayed.
<li>UEX displays the entry point addresses of all defined user exits.

==Usage notes==
<ul>
<li>The listing produced by <var>DISPLAY MODMAP</var> is identical to that produced in a CCASNAP, except <var>DISPLAY MODMAP</var> shows only one column's worth of csect names.

<li>The <var>DISPLAY MODMAP</var> output column layout is as follows:
address.length name version date-time-of-assembly

<li><var>DISPLAY MODMAP</var> is available as of version 7.5 of <var class="product">Model 204</var>.
</ul>

==Example==
<code>DISPLAY MODMAP FUN</code> displays only those csect names starting with <code>FUN</code>:
MODULE LINK MAP BY ADDRESS
------.---- FUNA
------.---- FUNM
------.---- FUNS
------.---- FUNX
------.---- FUNY
------.---- FUNZ
------.---- FUNL
------.---- FUNU1
------.---- FUNU2
------.---- FUNU3
2F34C2A8.0B30 FUNB 7.5.0G 2013-10-07 07:40
2F34CDD8.5C30 FUNC 7.5.0G 2013-10-11 07:48
2F352A08.17D0 FUND 7.5.0G 2013-10-07 07:40
2F3541D8.3C48 FUNE 7.5.0G 2013-10-07 07:40
2F357E20.4F30 FUNF 7.5.0G 2013-10-07 07:40
2F35CD50.04A8 FUNG 7.5.0G 2013-10-07 07:40
2F35D1F8.0208 FUNP 7.5.0G 2013-10-07 07:40
2F35D400.4498 FUNR 7.5.0G 2013-10-07 07:40
2F361898.A010 FUNT 7.5.0G 2013-10-22 14:29
2F36B8A8.05B8 FUNU 7.5.0G 2013-10-07 07:40
2F36BE60.0C70 FUNV 7.5.0G 2013-10-07 07:40
2F36CAD0.1A08 FUNW 7.5.0G 2013-10-07 07:40


<code>DISPLAY MODMAP UEX</code> displays the entry point addresses of all defined user exits:
USER EXIT MAP
------.---- JANACLFI
------.---- JANACLFO
------.---- CUSTINIT
------.---- CUSTTERM
------.---- CUSTINI0
------.---- CUSTINI1
------.---- CUSTINI2
------.---- CUSTRSTR
------.---- CUSTLOGO
------.---- CUSTOPRC
------.---- UHDRXT
------.---- IEFSD095
------.---- UUPUSRA
------.---- UUPUSRF
------.---- UUPUSRS
------.---- NCRYPXIT
------.---- MERGEJ
------.---- UPLVLUSR
------.---- TLOG
------.---- DDLPRIV
------.---- DMLPRIV
------.---- M204JLOG
------.---- M204CKPX


[[Category:Commands]]

MONITOR command

2015-08-27T13:48:53Z

DVRICKP:

==Summary==
<dl>
<dt>Privileges
<dd>System administrator
<dt>Function
<dd>Displays the status and performance of an Online system. See [[ONLINE monitoring]] for more information.
</dl>

==Syntax==
MONITOR
[[[[SYSTEM | USERS | ? ]
[STATISTICS [format-opt [[,] format-opt...]]]]
| (usernum [[,]usernum2...])]
[[EVERY] n | REPORT]
[FSTAT] (filename [[,] filename...])[ACTIVE]]


Where:
The parameters and parameters with arguments are optional. The default behavior of the MONITOR command without specifying parameters is:
MONITOR USERS

Specify the following parameters and arguments to display the status and performance you want to examine.
<table>
<tr>
<th><var>SYSTEM</var></th>
<td> indicates that only system information is displayed.</td>
</tr>

<tr>
<th><var>USERS</var></th>
<td> indicates that information for all active users and pseudo subtasks is displayed.</td>
</tr>

<tr>
<th><var>?</var></th>
<td> indicates that all possible sub-commands should be displayed.
The synonym of 'HELP' may also be used in place of a question mark.</td>
</tr>

<tr>
<th><var>STATISTICS</var></th>
<td> indicates that unformatted (that is, in a format similar to the journal) cumulative system or user statistics are displayed.</td>
</tr>

<tr>
<th>format-opt</th>
<td> includes the following:
<table>

<tr> <th>
Option
</th> <th>
Displays...
</th> </tr>

<tr> <th><var>
ALL
</var></th> <td>
All formatted information (USERS displays only) except for CONFLICT information.
</td> </tr>

<tr> <th><var>
BASIC
</var></th> <td>Basic information in all formatted displays. This is the default. </td> </tr>

<tr> <th><var>
CONFLICT
</var></th> <td>
Since-last statistics that keep track of critical file resource conflicts and record locking conflicts (USERS displays only). CONFLICT is mutually exclusive with PERFORMANCE. 
</td> </tr>

<tr> <th><var>
FILE[S]
</var></th> <td>
Open files for each user, in a formatted display (USERS displays only).
</td> </tr>

<tr> <th><var>
PERFORMANCE
</var></th> <td>
Performance statistics (USERS displays only) if the <var class="product">Model 204</var> parameters RPTCNT and SMPLTIM are nonzero. This option can be abbreviated as PERF. PERFORMANCE is mutually exclusive with CONFLICT.
</td> </tr>

<tr> <th><var>
SL
</var></th> <td>
Since-last user statistics (USERS displays only). 
</td> </tr>

</table>
</td>
</tr>

<tr>
<th>usrnum</th>
<td> is a number, enclosed by parentheses, representing a user(s) for whom status information is displayed. User numbers can be separated by commas or by one or more blanks.</td>
</tr>

<tr>
<th><var>EVERY</var></th>
<td> updates a display every unit of time specified by n.</td>
</tr>

<tr>
<th>n</th>
<td> is the number of seconds <var class="product">Model 204</var> waits after completing a display before beginning the next display. </td>
</tr>

<tr>
<th><var>REPORT</var></th>
<td> requests that a report be started after each set of performance lines is printed on the journal. If neither is specified, a single display is generated. Note that if a MONITOR command containing a REPORT or EVERY option is issued from a full screen terminal, a display is generated each time the ENTER key is pressed.</td>
</tr>

<tr>
<th><var>FSTAT</var></th>
<td> displays individual file statistics for each file in the file name list or for all open files for the user. The unformatted display includes all the nonzero file statistics associated with each file. If the keyword FSTAT is omitted and the first position of the first file name you specify is alphabetic, a file list is assumed.</td>
</tr>

<tr>
<th>filename</th>
<td> is the name of an open <var class="product">Model 204</var> file. If you do not specify a file name list, statistics for all open files are displayed. </td>
</tr>

<tr>
<th><var>ACTIVE</var></th>
<td> instructs <var class="product">Model 204</var> to process only currently active users; that is, users that are not off queue (OFFQ). </td>
</tr>

</table>
===Syntax notes===
MONITOR format options can be separated by commas or by one or more blanks. If no arguments are specified, MONITOR generates a single, non-repeating, formatted display of basic information for <var class="product">Model 204</var> and for all active users. 
MONITOR SL is equivalent to MONITOR USERS BASIC SL. 
MONITOR CONFLICT is equivalent to MONITOR SL CONFLICT.
PERFORMANCE and CONFLICT are conflicting options.
The chapter on using a system journal and statistics in the <var class="product">Model 204</var> System Manager's Guide has a description of the individual statistics shown in a MONITOR command display.
==Example==
This example displays cumulative system statistics updated every minute:
MONITOR STATISTICS EVERY 60

This example displays cumulative user statistics for users 1, 3, and 5, if they are active: 
MONITOR (1, 3, 5) STATISTICS

This example displays all files currently open by active users and pseudo subtasks:
MONITOR FILE

This example displays since-last, file, and performance statistics:
MONITOR SL FILE PERF

==Usage notes==
The MONITOR command lets the system manager check ongoing system operations and examine system and user statistics when a problem occurs. This command can be used in conjunction with the journal/audit trail statistics to help identify possible bottlenecks or overallocation of resources.
If an unformatted display (STATISTICS) is requested, only system information is displayed. If a formatted display is requested, information about <var class="product">Model 204</var> and all active users is displayed. 
The REPORT display can be stopped at any time by pressing the Attention Key (PA1 or an equivalent key). 
When MONITOR displays the CPU statistic as a whole number value, the units are milliseconds; when the value is a decimal number, the units are seconds.
All forms of the MONITOR command can be entered with the synonym M, for example: M DISKBUFF, instead of MONITOR DISKBUFF
====Displaying MONITOR and MONITOR SL commands====
The output from the MONITOR and MONITOR SL commands accommodate larger statistics, specifically, the columns for the statistics DKRD, DKWR, UDD, OUT, FINDS and RECDS.
Since the number of buffers in a run may exceed 99999 and the number of files may exceed 999, the header label produced by various forms of the MONITOR command has been reformatted. Now a 6-byte number can be displayed under the BUF (number of active buffers) column and a 4-byte number can be displayed under the FLS (number of open files) column. To adjust for these expansion, two bytes were appropriated from the SMPLS (value of RPTCNT) column, so that value can now not exceed 9999. In display the header produced by the MONITOR command has changed from: 
USER SVR BUF FLS PCPU SMPLS RUNG
26 87654 876 0.228 60 0.000

to:
USER SVR BUF FLS PCPU SMPLS RUNG
26 987654 9876 0.228 60 0.000

The alignment of columns starting at column 33 to the end of the line have not changed.
====Displaying the running users====
The user who issues a MONITOR command against the scheduler queues is described as running (RUNG), not just ready (REDY). 
[[Category: System administrator commands]]
[[Category:Commands]]

SWITCH STREAM command

2015-04-28T20:38:20Z

DVRICKP:

==Summary==
<dl>
<dt>Privileges
<dd>System manager
<dt>Function
<dd>You can switch streams-parallel, ring, concatenated, GDG-to the next member at any time.
</dl>
==Syntax==
SWITCH STREAM streamname [ RESET ]


Where:
streamname specifies CCAJRNL, CCAJLOG, CHKPOINT, or CHKPNTS. The command is valid for only these streams.
==Usage notes==
If you specify:
<ul>
<li>
Journal stream CCAJRNL or CCAJLOG, the currently active data set is closed and the next data set defined to the stream is opened. 
</li>

<li>
Checkpoint stream CHKPOINT or CHKPNTS, the currently active data set in the stream is closed after the next record is written to the data set.
</li>
</ul>
If a SWITCH STREAM CCAJRNL command is issued during CHECKPOINT EXTENDED QUIESCE command processing, the journal will be switched, a new checkpoint issued, and the duration extended quiesce time-out set in CPQZSECS will be reset to its maximum, original value-disregarding the already elapsed time.

<table>
<tr><th><var>RESET</var></th>
<td>This optional parameter will cause any disabled parallel GDG members to be reopened during the switch.
Valid only for a CCAJLOG stream specified as a Parallel GDG.

[[Category: System manager commands]]
[[Category:Commands]]

SWITCH STREAM command

2015-04-28T20:37:05Z

DVRICKP:

==Summary==
<dl>
<dt>Privileges
<dd>System manager
<dt>Function
<dd>You can switch streams-parallel, ring, concatenated, GDG-to the next member at any time.
</dl>
==Syntax==
SWITCH STREAM streamname [ RESET ]


Where:
streamname specifies CCAJRNL, CCAJLOG, CHKPOINT, or CHKPNTS. The command is valid for only these streams.
==Usage notes==
If you specify:
<ul>
<li>
Journal stream CCAJRNL or CCAJLOG, the currently active data set is closed and the next data set defined to the stream is opened. 
</li>

<li>
Checkpoint stream CHKPOINT or CHKPNTS, the currently active data set in the stream is closed after the next record is written to the data set.
</li>
</ul>
If a SWITCH STREAM CCAJRNL command is issued during CHECKPOINT EXTENDED QUIESCE command processing, the journal will be switched, a new checkpoint issued, and the duration extended quiesce time-out set in CPQZSECS will be reset to its maximum, original value-disregarding the already elapsed time.

<table>
<tr><th><var>RESET</var></th>
<td>This optional parameter will cause any disabled parallel GDG members to be reopened during the switch.
Valid only for a CCAJLOG stream specified as a Parallel GDG.</td></tr>

[[Category: System manager commands]]
[[Category:Commands]]

SWITCH STREAM command

2015-04-28T20:35:40Z

DVRICKP:

==Summary==
<dl>
<dt>Privileges
<dd>System manager
<dt>Function
<dd>You can switch streams-parallel, ring, concatenated, GDG-to the next member at any time.
</dl>
==Syntax==
SWITCH STREAM streamname [ RESET ]


Where:
streamname specifies CCAJRNL, CCAJLOG, CHKPOINT, or CHKPNTS. The command is valid for only these streams.
==Usage notes==
If you specify:
<ul>
<li>
Journal stream CCAJRNL or CCAJLOG, the currently active data set is closed and the next data set defined to the stream is opened. 
</li>

<li>
Checkpoint stream CHKPOINT or CHKPNTS, the currently active data set in the stream is closed after the next record is written to the data set.
</li>
</ul>
If a SWITCH STREAM CCAJRNL command is issued during CHECKPOINT EXTENDED QUIESCE command processing, the journal will be switched, a new checkpoint issued, and the duration extended quiesce time-out set in CPQZSECS will be reset to its maximum, original value-disregarding the already elapsed time.

<table>
<tr><th><var>RESET</var></th>
<td>This optional parameter will cause any disabled parallel GDG members to be reopened during the switch. </td>
<td>Valid only for a CCAJLOG stream specified as a Parallel GDG.</td></tr>

[[Category: System manager commands]]
[[Category:Commands]]

SWITCH STREAM command

2015-04-28T20:32:35Z

DVRICKP: Blanked the page

SWITCH STREAM command

2015-04-28T20:30:24Z

DVRICKP:

==Summary==
<dl>
<dt>Privileges
<dd>System manager
<dt>Function
<dd>You can switch streams-parallel, ring, concatenated, GDG-to the next member at any time.
</dl>
==Syntax==
SWITCH STREAM streamname [ RESET ]


Where:
streamname specifies CCAJRNL, CCAJLOG, CHKPOINT, or CHKPNTS. The command is valid for only these streams.
==Usage notes==
If you specify:
<ul>
<li>
Journal stream CCAJRNL or CCAJLOG, the currently active data set is closed and the next data set defined to the stream is opened. 
</li>

<li>
Checkpoint stream CHKPOINT or CHKPNTS, the currently active data set in the stream is closed after the next record is written to the data set.
</li>
</ul>
If a SWITCH STREAM CCAJRNL command is issued during CHECKPOINT EXTENDED QUIESCE command processing, the journal will be switched, a new checkpoint issued, and the duration extended quiesce time-out set in CPQZSECS will be reset to its maximum, original value-disregarding the already elapsed time.

<table>
<tr><th><var>RESET</var></th>
<td>This optional parameter will cause any disabled parallel GDG members to be reopened during the switch. </td>
<td>Valid only for a CCAJLOG stream specified as a Parallel GDG.</tr></table>

[[Category: System manager commands]]
[[Category:Commands]]

SWITCH STREAM command

2015-04-28T20:24:13Z

DVRICKP:

==Summary==
<dl>
<dt>Privileges
<dd>System manager
<dt>Function
<dd>You can switch streams-parallel, ring, concatenated, GDG-to the next member at any time.
</dl>
==Syntax==
SWITCH STREAM streamname [ RESET ]


Where:
streamname specifies CCAJRNL, CCAJLOG, CHKPOINT, or CHKPNTS. The command is valid for only these streams.
==Usage notes==
If you specify:
<ul>
<li>
Journal stream CCAJRNL or CCAJLOG, the currently active data set is closed and the next data set defined to the stream is opened. 
</li>

<li>
Checkpoint stream CHKPOINT or CHKPNTS, the currently active data set in the stream is closed after the next record is written to the data set.
</li>
</ul>
If a SWITCH STREAM CCAJRNL command is issued during CHECKPOINT EXTENDED QUIESCE command processing, the journal will be switched, a new checkpoint issued, and the duration extended quiesce time-out set in CPQZSECS will be reset to its maximum, original value-disregarding the already elapsed time.

<table>
<tr><th><var>RESET</var></th>
<td>This optional parameter will cause any disabled parallel GDG members to be reopened during the switch. </td>
Valid only for a CCAJLOG stream specified as a Parallel GDG.</tr></table>

[[Category: System manager commands]]
[[Category:Commands]]

SERVACTV parameter

2015-01-27T21:35:37Z

DVRICKP:

{{Template:SERVACTV parameter subtitle}}
==Summary==
<dl>
<dt>Default value
<dd>None
<dt>Parameter type
<dd>Utable
<dt>Where set
<dd>View-only
<dt>Related products
<dd>All
<dt>Introduced
<dd><var class="product">Model 204 V6.1</var> or earlier
</dl>
==Description==
The swappable size, in bytes, of the BTB server area being used by the current user
The server area size actually in use frequently differs from the value specified in the SERVSIZE parameter. SERVACTV, which is readily viewable, shows the size of the currently active BTB server. 
[[Category:Utable parameters]]
[[Category:Parameters]]

SERVACTG parameter

2015-01-27T21:34:31Z

DVRICKP:

{{Template:SERVACTV parameter subtitle}}
==Summary==
<dl>
<dt>Default value
<dd>None
<dt>Parameter type
<dd>Utable
<dt>Where set
<dd>View-only
<dt>Related products
<dd>All
<dt>Introduced
<dd><var class="product">Model 204 V7.6</var>
</dl>
==Description==
The swappable size, in bytes, of the ATB server area being used by the current user
The server area size actually in use frequently differs from the value specified in the SERVGSZ parameter. SERVACTG, which is readily viewable, shows the size of the currently active ATB server. 
[[Category:Utable parameters]]
[[Category:Parameters]]

SERVACTG parameter

2015-01-27T21:31:38Z

DVRICKP: Created page with "{{Template:SERVACTV parameter subtitle}} ==Summary== <dl> <dt>Default value <dd>None <dt>Parameter type <dd>Utable <dt>Where set <dd>View-only <dt>Related products <dd>All <dt..."

{{Template:SERVACTV parameter subtitle}}
==Summary==
<dl>
<dt>Default value
<dd>None
<dt>Parameter type
<dd>Utable
<dt>Where set
<dd>View-only
<dt>Related products
<dd>All
<dt>Introduced
<dd><var class="product">Model 204 V7.6</var>
/dl>
==Description==
The swappable size, in bytes, of the ATB server area being used by the current user
The server area size actually in use frequently differs from the value specified in the SERVGSZ parameter. SERVACTG, which is readily viewable, shows the size of the currently active ATB server. 
[[Category:Utable parameters]]
[[Category:Parameters]]

Template:List of M204 parameters

2015-01-27T21:29:37Z

DVRICKP:

<div class="showVisit">
<table>
<tr class="head">
<th>Parameter name</th>
<th>Description</th>
<th>Set/reset type</th>
</tr>
<tr>
<th xml:space="preserve"><var>[[ACCOUNT parameter|ACCOUNT]]</var></th>
<td xml:space="preserve">Billing account</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[ACCTIM parameter|ACCTIM]]</var></th>
<td xml:space="preserve">Time before partial stat lines</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[ACTRDS parameter|ACTRDS]]</var></th>
<td xml:space="preserve">Active RSA subtasks [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[ADDLVL parameter|ADDLVL]]</var></th>
<td xml:space="preserve">Default add FLS level</td>
<td xml:space="preserve">File manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[AGEINCR parameter|AGEINCR]]</var></th>
<td xml:space="preserve">Aging priority increment</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[AGEINTVL parameter|AGEINTVL]]</var></th>
<td xml:space="preserve">Aging interval</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[AGESCAN parameter|AGESCAN]]</var></th>
<td xml:space="preserve">Age scan interval</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[AGESLICE parameter|AGESLICE]]</var></th>
<td xml:space="preserve">Aging slice increment</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[ALOCPRIV parameter|ALOCPRIV]]</var></th>
<td xml:space="preserve">Allocate privilege requirement</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[ALTIODEV parameter|ALTIODEV]]</var></th>
<td xml:space="preserve">Alternate user zero IODEV</td>
<td xml:space="preserve">EXEC PARM field</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[AMPSUBS parameter|AMPSUBS]]</var></th>
<td xml:space="preserve">Number of active offload subtasks</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[AMPSUBZ parameter|AMPSUBZ]]</var></th>
<td xml:space="preserve">Number of active zIIP eligible subtasks</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[APSYPAGE parameter|APSYPAGE]]</var></th>
<td xml:space="preserve">Number of APSY pages in hiperspace</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[APSYSEC parameter|APSYSEC]]</var></th>
<td xml:space="preserve">Sirius APSY security flags [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[APSYXMM parameter|APSYXMM]]</var></th>
<td xml:space="preserve">Expanded storage megabytes for saved APSY compilations [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[ARETRIES parameter|ARETRIES]]</var></th>
<td xml:space="preserve">Table A page retries</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[ASIZE parameter|ASIZE]]</var></th>
<td xml:space="preserve">Pages in table A</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[ASTRPPG parameter|ASTRPPG]]</var></th>
<td xml:space="preserve">Table A strings per page</td>
<td xml:space="preserve">CREATE command</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[ATRPG parameter|ATRPG]]</var></th>
<td xml:space="preserve">Table A attribute pages</td>
<td xml:space="preserve">CREATE command</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[AUDITOPT parameter|AUDITOPT]]</var></th>
<td xml:space="preserve">Audit options</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[AUTOGCN parameter|AUTOGCN]]</var></th>
<td xml:space="preserve">Garbage collection threshold [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[AUTOSYS parameter|AUTOSYS]]</var></th>
<td xml:space="preserve">Automatic subsystem</td>
<td xml:space="preserve">User n parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[B24EXCWT parameter|B24EXCWT]]</var></th>
<td xml:space="preserve">BATCH204 wait time(ms) between M204.0583 msgs</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[B24SHRWT parameter|B24SHRWT]]</var></th>
<td xml:space="preserve">BATCH204 wait time(ms) between M204.0582 msgs</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[BASECENT parameter|BASECENT]]</var></th>
<td xml:space="preserve">CENTSPLT base century</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[BAUTOINC parameter|BAUTOINC]]</var></th>
<td xml:space="preserve">Number of pages for table B auto increase</td>
<td xml:space="preserve">File manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[BAUTOTYP parameter|BAUTOTYP]]</var></th>
<td xml:space="preserve">Table B auto increase options [[#Obsolete parameters|(obs)]]</td>
<td xml:space="preserve">File manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[BEXTOVFL parameter|BEXTOVFL]]</var></th>
<td xml:space="preserve">Table B extra overflow areas</td>
<td xml:space="preserve">CREATE command</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[BHIGHPG parameter|BHIGHPG]]</var></th>
<td xml:space="preserve">Table B highest active page</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[BIGOBJL parameter|BIGOBJL]]</var></th>
<td xml:space="preserve">Size of object list considered big [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[BLOWPG parameter|BLOWPG]]</var></th>
<td xml:space="preserve">Table B lowest active page</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[BPGPMSTR parameter|BPGPMSTR]]</var></th>
<td xml:space="preserve">Table B pages/master area</td>
<td xml:space="preserve">CREATE command</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[BPGPOVFL parameter|BPGPOVFL]]</var></th>
<td xml:space="preserve">Table B pages/overflow area</td>
<td xml:space="preserve">CREATE command</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[BQLEN parameter|BQLEN]]</var></th>
<td xml:space="preserve">Table B queue length</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[BRECPPG parameter|BRECPPG]]</var></th>
<td xml:space="preserve">Table B records per page</td>
<td xml:space="preserve">CREATE command</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[BRESERVE parameter|BRESERVE]]</var></th>
<td xml:space="preserve">Table B reserve space</td>
<td xml:space="preserve">File manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[BREUSE parameter|BREUSE]]</var></th>
<td xml:space="preserve">Free space required to reuse table B page</td>
<td xml:space="preserve">File manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[BREUSED parameter|BREUSED]]</var></th>
<td xml:space="preserve">Records added reusing record numbers</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[BRLIMSZ parameter|BRLIMSZ]]</var></th>
<td xml:space="preserve">Table B record limit size</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[BSIZE parameter|BSIZE]]</var></th>
<td xml:space="preserve">Pages in table B</td>
<td xml:space="preserve">CREATE command</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[CACHE parameter|CACHE]]</var></th>
<td xml:space="preserve">Cache fast write</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[CASE parameter|CASE]]</var></th>
<td xml:space="preserve">Text input case</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[CAUDIT parameter|CAUDIT]]</var></th>
<td xml:space="preserve">Card audit bits</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[CDMAXP2X parameter|CDMAXP2X]]</var></th>
<td xml:space="preserve">Maximum constraints pages power of 2</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[CDMINP2X parameter|CDMINP2X]]</var></th>
<td xml:space="preserve">Minimum constraints pages power of 2</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[CECHO parameter|CECHO]]</var></th>
<td xml:space="preserve">Card echo</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[CEECHO parameter|CEECHO]]</var></th>
<td xml:space="preserve">Card edit echo</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[CENTSPAN parameter|CENTSPAN]]</var></th>
<td xml:space="preserve">CENTSPAN for date $functions [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[CENTSPLT parameter|CENTSPLT]]</var></th>
<td xml:space="preserve">Century year split</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[CFRJRNL parameter|CFRJRNL]]</var></th>
<td xml:space="preserve">CFR+rec locking stats to CCAJRNL</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[CFRLOOK parameter|CFRLOOK]]</var></th>
<td xml:space="preserve">CFR+rec locking stats to monitor</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[CFRWPCT parameter|CFRWPCT]]</var></th>
<td xml:space="preserve">Max nonswappable CFR waiters</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[CHKPRIV parameter|CHKPRIV]]</var></th>
<td xml:space="preserve">Checkpoint privilege requirement</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[CMSVERSN parameter|CMSVERSN]]</var></th>
<td xml:space="preserve">Version of the CMS interface</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[COMEND parameter|COMEND]]</var></th>
<td xml:space="preserve">End of comment block</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[COMMAND parameter|COMMAND]]</var></th>
<td xml:space="preserve">Model204 command table</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[COMMLOG parameter|COMMLOG]]</var></th>
<td xml:space="preserve">$Command login flags [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[COMPERR parameter|COMPERR]]</var></th>
<td xml:space="preserve">Compiler error reporting options</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[COMPOPT parameter|COMPOPT]]</var></th>
<td xml:space="preserve">Compiler options [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[COMSTART parameter|COMSTART]]</var></th>
<td xml:space="preserve">Start of comment block</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[CP3270 parameter|CP3270]]</var></th>
<td xml:space="preserve">3270 code page ID [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[CPMAX parameter|CPMAX]]</var></th>
<td xml:space="preserve">Max # of checkpoints</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[CPQZACTN parameter|CPQZACTN]]</var></th>
<td xml:space="preserve">Checkpoint extended quiesce timeout action</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[CPQZSECS parameter|CPQZSECS]]</var></th>
<td xml:space="preserve">Number of seconds before CPQZACTN</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[CPSORT parameter|CPSORT]]</var></th>
<td xml:space="preserve">IFAM2 CHKP signon tries</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[CPTIME parameter|CPTIME]]</var></th>
<td xml:space="preserve">Minutes between checkpoints</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[CPTO parameter|CPTO]]</var></th>
<td xml:space="preserve">Checkpoint timeout in seconds</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[CPTQ parameter|CPTQ]]</var></th>
<td xml:space="preserve">Batch quiesce timeout in seconds</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[CPTS parameter|CPTS]]</var></th>
<td xml:space="preserve">Sub-transaction timeout in seconds</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[CPTYPE parameter|CPTYPE]]</var></th>
<td xml:space="preserve">Checkpoint type</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[CPUSLICE parameter|CPUSLICE]]</var></th>
<td xml:space="preserve">CPU slice - CPU</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[CRETRIES parameter|CRETRIES]]</var></th>
<td xml:space="preserve">Table C page retries</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[CRFSCHNL parameter|CRFSCHNL]]</var></th>
<td xml:space="preserve">Full screen CRAM name</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[CRIOCHNL parameter|CRIOCHNL]]</var></th>
<td xml:space="preserve">User language CRAM channel name</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[CS3270 parameter|CS3270]]</var></th>
<td xml:space="preserve">3270 character set ID [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[CSECHO parameter|CSECHO]]</var></th>
<td xml:space="preserve">Card substitution echo</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[CSIPID parameter|CSIPID]]</var></th>
<td xml:space="preserve">TCP/IP system ID [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[CSIZE parameter|CSIZE]]</var></th>
<td xml:space="preserve">Pages in table C</td>
<td xml:space="preserve">CREATE command</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[CURALVL parameter|CURALVL]]</var></th>
<td xml:space="preserve">Add FLS level for file/group</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[CURCLASS parameter|CURCLASS]]</var></th>
<td xml:space="preserve">User priv class (proc) for file/group</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[CURFILE parameter|CURFILE]]</var></th>
<td xml:space="preserve">Current file</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[CURLOC parameter|CURLOC]]</var></th>
<td xml:space="preserve">CURFILE location if remote</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[CURPRIV parameter|CURPRIV]]</var></th>
<td xml:space="preserve">Privs for current file/group</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[CURREC parameter|CURREC]]</var></th>
<td xml:space="preserve">Current record number</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[CURREP31 parameter|CURREP31]]</var></th>
<td xml:space="preserve">Current 31-bit storage for report writers (megabytes) [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[CURREP64 parameter|CURREP64]]</var></th>
<td xml:space="preserve">Current 64-bit storage for report writers (megabytes) [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[CURRLVL parameter|CURRLVL]]</var></th>
<td xml:space="preserve">Read FLS level for file/group</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[CURSLVL parameter|CURSLVL]]</var></th>
<td xml:space="preserve">Select FLS level for file/group</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[CURULVL parameter|CURULVL]]</var></th>
<td xml:space="preserve">Update FLS level for file/group</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[CUSTOM parameter|CUSTOM]]</var></th>
<td xml:space="preserve">Enable special modifications to Model 204</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[D$ONEOF parameter|D$ONEOF]]</var></th>
<td xml:space="preserve">$OneOf item delimiter</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[DACTIVE parameter|DACTIVE]]</var></th>
<td xml:space="preserve">List page active</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[DAUTOINC parameter|DAUTOINC]]</var></th>
<td xml:space="preserve">Number of pages for table D auto increase</td>
<td xml:space="preserve">File manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[DB2PLAN parameter|DB2PLAN]]</var></th>
<td xml:space="preserve">DB2 plan name</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[DB2POINT parameter|DB2POINT]]</var></th>
<td xml:space="preserve">Exec DB2 decimal point</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[DB2QUOTE parameter|DB2QUOTE]]</var></th>
<td xml:space="preserve">Exec DB2 quote</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[DB2THRD parameter|DB2THRD]]</var></th>
<td xml:space="preserve">Number of DB2 threads</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[DEBUGMAX parameter|DEBUGMAX]]</var></th>
<td xml:space="preserve">Maximum debug worker threads [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[DEBUGPAG parameter|DEBUGPAG]]</var></th>
<td xml:space="preserve">Maximum debug CCATEMP pages [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[DEBUGUL parameter|DEBUGUL]]</var></th>
<td xml:space="preserve">User language debug options</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[DEFCENT parameter|DEFCENT]]</var></th>
<td xml:space="preserve">Default century</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[DEFINCP parameter|DEFINCP]]</var></th>
<td xml:space="preserve">Default automatic table size pct increase</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[DHIGHPG parameter|DHIGHPG]]</var></th>
<td xml:space="preserve">Table D highest page used</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[DKUPDTWT parameter|DKUPDTWT]]</var></th>
<td xml:space="preserve"># seconds after file's last update before file is updated on disk</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[DPGSRES parameter|DPGSRES]]</var></th>
<td xml:space="preserve">Table D pages reserved</td>
<td xml:space="preserve">File manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[DPGSUSED parameter|DPGSUSED]]</var></th>
<td xml:space="preserve">Table D pages in use</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[DRESERVE parameter|DRESERVE]]</var></th>
<td xml:space="preserve">List page reserve space</td>
<td xml:space="preserve">File manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[DSIZE parameter|DSIZE]]</var></th>
<td xml:space="preserve">Pages in table D</td>
<td xml:space="preserve">CREATE command</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[DSPOPT parameter|DSPOPT]]</var></th>
<td xml:space="preserve">Data space options</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[DTS parameter|DTS]]</var></th>
<td xml:space="preserve">Date time stamp updates (1=automatic, 0=bypassed)</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[DTSFN parameter|DTSFN]]</var></th>
<td xml:space="preserve">Date time stamp field name</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[DUFILES parameter|DUFILES]]</var></th>
<td xml:space="preserve">Files open in deferred update mode</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[DUMPAOPT parameter|DUMPAOPT]]</var></th>
<td xml:space="preserve">MP altpdl dump options</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[DUMPMOPT parameter|DUMPMOPT]]</var></th>
<td xml:space="preserve">MP maintask dump options</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[DUMPOPTS parameter|DUMPOPTS]]</var></th>
<td xml:space="preserve">Fast Backup/Restore flags [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[DUMPSOPT parameter|DUMPSOPT]]</var></th>
<td xml:space="preserve">MP subtask dump options</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[DUMPTMAX parameter|DUMPTMAX]]</var></th>
<td xml:space="preserve">Maximum CCATEMP usage for DUMP [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[DUMPTMIN parameter|DUMPTMIN]]</var></th>
<td xml:space="preserve">Minimum free CCATEMP for DUMP [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[DUPTERM parameter|DUPTERM]]</var></th>
<td xml:space="preserve">Number of duplicate terminals</td>
<td xml:space="preserve">User n parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[DVADD parameter|DVADD]]</var></th>
<td xml:space="preserve">Device address</td>
<td xml:space="preserve">User n parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[ECISUBS parameter|ECISUBS]]</var></th>
<td xml:space="preserve">ECF initial subtasks</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[ECMODS parameter|ECMODS]]</var></th>
<td xml:space="preserve">ECF maximum modules loaded</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[ECMSUBS parameter|ECMSUBS]]</var></th>
<td xml:space="preserve">ECF maximum subtasks</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[ECNAMES parameter|ECNAMES]]</var></th>
<td xml:space="preserve">ECF maximum call names</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[ECPRIV parameter|ECPRIV]]</var></th>
<td xml:space="preserve">ECF privileges</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[ECPSIZE parameter|ECPSIZE]]</var></th>
<td xml:space="preserve">ECF initial parameter area allocation</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[ECWAIT parameter|ECWAIT]]</var></th>
<td xml:space="preserve">ECF maximum wait for external call</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[EDIT parameter|EDIT]]</var></th>
<td xml:space="preserve">Edit control</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[EHIGHPG parameter|EHIGHPG]]</var></th>
<td xml:space="preserve">Table E highest page used</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[ENQRETRY parameter|ENQRETRY]]</var></th>
<td xml:space="preserve">Retry record locking</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[ENTTAB parameter|ENTTAB]]</var></th>
<td xml:space="preserve">Default entity translation table [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[EOJPW parameter|EOJPW]]</var></th>
<td xml:space="preserve">EOJ password</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[EOVFLADD parameter|EOVFLADD]]</var></th>
<td xml:space="preserve">Records added to extra overflow areas</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[EOVFLDEL parameter|EOVFLDEL]]</var></th>
<td xml:space="preserve">Records deleted from ext ovflow areas</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[EPGSUSED parameter|EPGSUSED]]</var></th>
<td xml:space="preserve">Table E pages in use</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[ERASE parameter|ERASE]]</var></th>
<td xml:space="preserve">Erase-character symbol</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[ERCNT parameter|ERCNT]]</var></th>
<td xml:space="preserve">Error count [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[ERMX parameter|ERMX]]</var></th>
<td xml:space="preserve">Maximum number of errors</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[ERRLEN parameter|ERRLEN]]</var></th>
<td xml:space="preserve">Length of errors saved</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[ERRMSGL parameter|ERRMSGL]]</var></th>
<td xml:space="preserve">Saved error message length</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[ERRSAVE parameter|ERRSAVE]]</var></th>
<td xml:space="preserve">No of errors saved</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[ESIZE parameter|ESIZE]]</var></th>
<td xml:space="preserve">Pages in table E</td>
<td xml:space="preserve">CREATE command</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[EXCPVR parameter|EXCPVR]]</var></th>
<td xml:space="preserve">EXCPVR appendage id</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[EXTNADD parameter|EXTNADD]]</var></th>
<td xml:space="preserve">Extension records added</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[EXTNDEL parameter|EXTNDEL]]</var></th>
<td xml:space="preserve">Extension records deleted</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[FACTDEB parameter|FACTDEB]]</var></th>
<td xml:space="preserve">SirFact debugging flags [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[FASTGLOB parameter|FASTGLOB]]</var></th>
<td xml:space="preserve">Fast global processing</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[FICREATE parameter|FICREATE]]</var></th>
<td xml:space="preserve">Create format</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[FIFLAGS parameter|FIFLAGS]]</var></th>
<td xml:space="preserve">File status switches</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[FIFORMAT parameter|FIFORMAT]]</var></th>
<td xml:space="preserve">Current FPL format</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[FILEMODL parameter|FILEMODL]]</var></th>
<td xml:space="preserve">File model enforced</td>
<td xml:space="preserve">File manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[FILEORG parameter|FILEORG]]</var></th>
<td xml:space="preserve">File organization</td>
<td xml:space="preserve">CREATE command</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[FISTAT parameter|FISTAT]]</var></th>
<td xml:space="preserve">Current status of file</td>
<td xml:space="preserve">File manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[FITRANS parameter|FITRANS]]</var></th>
<td xml:space="preserve">Transform format</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[FIXSIZE parameter|FIXSIZE]]</var></th>
<td xml:space="preserve">Fixed server size requirement</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[FLUSH parameter|FLUSH]]</var></th>
<td xml:space="preserve">Erase-line symbol</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[FNVMASK parameter|FNVMASK]]</var></th>
<td xml:space="preserve">Filename version mask [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[FOPT parameter|FOPT]]</var></th>
<td xml:space="preserve">File options</td>
<td xml:space="preserve">File manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[FRCVOPT parameter|FRCVOPT]]</var></th>
<td xml:space="preserve">File recovery options</td>
<td xml:space="preserve">File manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[FREESIZE parameter|FREESIZE]]</var></th>
<td xml:space="preserve">Pages in free space</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[FRELPREV parameter|FRELPREV]]</var></th>
<td xml:space="preserve">Fast/Reload previous request number [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[FSATTN parameter|FSATTN]]</var></th>
<td xml:space="preserve">Full screen attention key</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[FSOUTPUT parameter|FSOUTPUT]]</var></th>
<td xml:space="preserve">Full screen color and highlighting</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[FSTRMOPT parameter|FSTRMOPT]]</var></th>
<td xml:space="preserve">Full screen terminal options</td>
<td xml:space="preserve">User n parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[FUNCOPTS parameter|FUNCOPTS]]</var></th>
<td xml:space="preserve">Sirius function flags [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[FUNMAXT parameter|FUNMAXT]]</var></th>
<td xml:space="preserve">Default Fast/Unload request timeout (seconds) [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[FUNPARM parameter|FUNPARM]]</var></th>
<td xml:space="preserve">Fast/Unload system flags [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[FUNPGM parameter|FUNPGM]]</var></th>
<td xml:space="preserve">Name of Fast/Unload load module [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[FUNPRMU parameter|FUNPRMU]]</var></th>
<td xml:space="preserve">Fast/Unload user flags [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[FUNTSKN parameter|FUNTSKN]]</var></th>
<td xml:space="preserve">Maximum Fast/Unload tasks [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[FVFPG parameter|FVFPG]]</var></th>
<td xml:space="preserve">Table A few valued field pages</td>
<td xml:space="preserve">CREATE command</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[GCSTATS parameter|GCSTATS]]</var></th>
<td xml:space="preserve">Garbage collector statistics [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[GTBLHASH parameter|GTBLHASH]]</var></th>
<td xml:space="preserve">Number of hashed GTBL buckets</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[GTBLPCT parameter|GTBLPCT]]</var></th>
<td xml:space="preserve">Initial GTBL percentage to allocate for plain globals</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[HASHCELL parameter|HASHCELL]]</var></th>
<td xml:space="preserve">Hash cells per buffer</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[HASHKEY parameter|HASHKEY]]</var></th>
<td xml:space="preserve">Name of file's hash key field</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[HASHSPIL parameter|HASHSPIL]]</var></th>
<td xml:space="preserve">Hash file spill chain length</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[HDRCTL parameter|HDRCTL]]</var></th>
<td xml:space="preserve">Header control</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[HGHREP31 parameter|HGHREP31]]</var></th>
<td xml:space="preserve">High 31-bit storage for report writers (megabytes) [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[HGHREP64 parameter|HGHREP64]]</var></th>
<td xml:space="preserve">High 64-bit storage for report writers (megabytes) [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[HIGHSORT parameter|HIGHSORT]]</var></th>
<td xml:space="preserve">Record with highest sort key</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[HTLEN parameter|HTLEN]]</var></th>
<td xml:space="preserve">Max length of each header or trailer</td>
<td xml:space="preserve">User n parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[IFAMBS parameter|IFAMBS]]</var></th>
<td xml:space="preserve">IFAM2 buffer size</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[IFAMCHNL parameter|IFAMCHNL]]</var></th>
<td xml:space="preserve">IFAM2 CRAM channel name</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[INCCC parameter|INCCC]]</var></th>
<td xml:space="preserve">Input cont char column</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[INCSLICE parameter|INCSLICE]]</var></th>
<td xml:space="preserve">Include slicing limit</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[INMRL parameter|INMRL]]</var></th>
<td xml:space="preserve">Max input record length</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[INPUT parameter|INPUT]]</var></th>
<td xml:space="preserve">Input device name</td>
<td xml:space="preserve">User n parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[IODEV parameter|IODEV]]</var></th>
<td xml:space="preserve">Type of I/O device</td>
<td xml:space="preserve">User n parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[IOSLICE parameter|IOSLICE]]</var></th>
<td xml:space="preserve">CPU slice - IO</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[IPADDR parameter|IPADDR]]</var></th>
<td xml:space="preserve">IP address</td>
<td xml:space="preserve">User n parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[IVERIFY parameter|IVERIFY]]</var></th>
<td xml:space="preserve">Write verify - initialization</td>
<td xml:space="preserve">CREATE command</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[JANDEBM parameter|JANDEBM]]</var></th>
<td xml:space="preserve">Janus Web debugging message flags [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[JESID parameter|JESID]]</var></th>
<td xml:space="preserve">JES job id</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[JOBNM parameter|JOBNM]]</var></th>
<td xml:space="preserve">Job name</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[JOBSTEP parameter|JOBSTEP]]</var></th>
<td xml:space="preserve">Job step name</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[KOMMOPT parameter|KOMMOPT]]</var></th>
<td xml:space="preserve">KOMM options [[#Obsolete parameters|(obs)]]</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[LANGFILE parameter|LANGFILE]]</var></th>
<td xml:space="preserve">Language name for file</td>
<td xml:space="preserve">File manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[LANGUSER parameter|LANGUSER]]</var></th>
<td xml:space="preserve">Language name for thread</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[LAUDIT parameter|LAUDIT]]</var></th>
<td xml:space="preserve">Line audit bits</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[LAUDPROC parameter|LAUDPROC]]</var></th>
<td xml:space="preserve">Length of audit procedure names</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[LCPDLST parameter|LCPDLST]]</var></th>
<td xml:space="preserve">Length of C push-down list</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[LDKBMW parameter|LDKBMW]]</var></th>
<td xml:space="preserve"># of pages in DKBM stat window</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[LDKBMWND parameter|LDKBMWND]]</var></th>
<td xml:space="preserve"># of pages in DKBM LRU window</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[LDKBMWNG parameter|LDKBMWNG]]</var></th>
<td xml:space="preserve"># of pages in above-the-bar DKBM LRU window</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[LECHO parameter|LECHO]]</var></th>
<td xml:space="preserve">Line echo</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[LEECHO parameter|LEECHO]]</var></th>
<td xml:space="preserve">Line edit echo</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[LENQTBL parameter|LENQTBL]]</var></th>
<td xml:space="preserve"># of resource locking table entries per user</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[LFSCB parameter|LFSCB]]</var></th>
<td xml:space="preserve">Length of full screen buffer</td>
<td xml:space="preserve">User n parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[LFTBL parameter|LFTBL]]</var></th>
<td xml:space="preserve">Length of FTBL</td>
<td xml:space="preserve">User n parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[LGTBL parameter|LGTBL]]</var></th>
<td xml:space="preserve">Length of global variable table</td>
<td xml:space="preserve">User n parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[LHEAP parameter|LHEAP]]</var></th>
<td xml:space="preserve">Length of heap</td>
<td xml:space="preserve">User n parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[LIBUFF parameter|LIBUFF]]</var></th>
<td xml:space="preserve">Length of input buffer</td>
<td xml:space="preserve">User n parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[LINEND parameter|LINEND]]</var></th>
<td xml:space="preserve">Logical line end symbol</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[LITBL parameter|LITBL]]</var></th>
<td xml:space="preserve">Length of ITBL</td>
<td xml:space="preserve">User n parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[LNTBL parameter|LNTBL]]</var></th>
<td xml:space="preserve">Length of NTBL</td>
<td xml:space="preserve">User n parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[LOBUFF parameter|LOBUFF]]</var></th>
<td xml:space="preserve">Length of output buffer</td>
<td xml:space="preserve">User n parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[LOCATION parameter|LOCATION]]</var></th>
<td xml:space="preserve">D204 location</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[LOGADD parameter|LOGADD]]</var></th>
<td xml:space="preserve">Room for password additions</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[LOGFAIL parameter|LOGFAIL]]</var></th>
<td xml:space="preserve">Action to be taken if logtry exceeded</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[LOGONENQ parameter|LOGONENQ]]</var></th>
<td xml:space="preserve">Userid logon enqueue</td>
<td xml:space="preserve">User n parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[LOGTRY parameter|LOGTRY]]</var></th>
<td xml:space="preserve">Maximum number of login attempts allowed per thread</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[LOUTPB parameter|LOUTPB]]</var></th>
<td xml:space="preserve">Length of output page buffer</td>
<td xml:space="preserve">User n parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[LPDLST parameter|LPDLST]]</var></th>
<td xml:space="preserve">Length of user push down list</td>
<td xml:space="preserve">User n parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[LPFORCE parameter|LPFORCE]]</var></th>
<td xml:space="preserve">Force procedure audit</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[LQTBL parameter|LQTBL]]</var></th>
<td xml:space="preserve">Length of QTBL</td>
<td xml:space="preserve">User n parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[LRECLTBL parameter|LRECLTBL]]</var></th>
<td xml:space="preserve">Length of record locking table (deprecated - use LRETBL)</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[LRESLTBL parameter|LRESLTBL]]</var></th>
<td xml:space="preserve"># of resource locking table entries per user (deprecated - use LENQTBL)</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[LRETBL parameter|LRETBL]]</var></th>
<td xml:space="preserve">Length of record locking table</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[LRUPG parameter|LRUPG]]</var></th>
<td xml:space="preserve">LRU pages remembered</td>
<td xml:space="preserve">EXEC PARM field</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[LRUTIM parameter|LRUTIM]]</var></th>
<td xml:space="preserve">Time to flush obsolete LRU references</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[LSECHO parameter|LSECHO]]</var></th>
<td xml:space="preserve">Line substitution echo</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[LSERVER parameter|LSERVER]]</var></th>
<td xml:space="preserve">BTB server size requirement</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[LSERVERN parameter|LSERVERN]]</var></th>
<td xml:space="preserve">NSA server size requirement</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[LSERVERG parameter|LSERVERG]]</var></th>
<td xml:space="preserve">ATB server size requirement</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[LSERVPD parameter|LSERVPD]]</var></th>
<td xml:space="preserve">Length of scheduler pdl [[#Obsolete parameters|(obs)]]</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[LSTBL parameter|LSTBL]]</var></th>
<td xml:space="preserve">Length of STBL</td>
<td xml:space="preserve">User n parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[LSTRLOB parameter|LSTRLOB]]</var></th>
<td xml:space="preserve">Treat LOBs as Longstrings [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[LTTBL parameter|LTTBL]]</var></th>
<td xml:space="preserve">Length of TTBL</td>
<td xml:space="preserve">User n parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[LVLTRC parameter|LVLTRC]]</var></th>
<td xml:space="preserve">End of input stream message</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[LVTBL parameter|LVTBL]]</var></th>
<td xml:space="preserve">Length of VTBL</td>
<td xml:space="preserve">User n parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[LXTBL parameter|LXTBL]]</var></th>
<td xml:space="preserve">Length of XTBL</td>
<td xml:space="preserve">User n parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[MARKSAN parameter|MARKSAN]]</var></th>
<td xml:space="preserve">Maximum items in a MarksArray [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[MAXAUSER parameter|MAXAUSER]]</var></th>
<td xml:space="preserve">Maximum active interactive users [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[MAXAUSEW parameter|MAXAUSEW]]</var></th>
<td xml:space="preserve">Minimum seconds between MAXAUSER warnings [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[MAXBG parameter|MAXBG]]</var></th>
<td xml:space="preserve">Maximum background/independent Daemons [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[MAXBUF parameter|MAXBUF]]</var></th>
<td xml:space="preserve">Maximum number of buffers</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[MAXDAEM parameter|MAXDAEM]]</var></th>
<td xml:space="preserve">Maximum Daemon objects per user [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[MAXHDR parameter|MAXHDR]]</var></th>
<td xml:space="preserve">Max number of headers</td>
<td xml:space="preserve">User n parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[MAXINCBP parameter|MAXINCBP]]</var></th>
<td xml:space="preserve">Maximum dynamic table B size pct increase</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[MAXINCL parameter|MAXINCL]]</var></th>
<td xml:space="preserve">Max Include level</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[MAXOBUF parameter|MAXOBUF]]</var></th>
<td xml:space="preserve">Maximum open buffers per user</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[MAXOND parameter|MAXOND]]</var></th>
<td xml:space="preserve">Maximum ON unit recursion depth</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[MAXRDS parameter|MAXRDS]]</var></th>
<td xml:space="preserve">Maximum RSA subtasks [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[MAXREP31 parameter|MAXREP31]]</var></th>
<td xml:space="preserve">Maximum 31-bit storage for report writers (megabytes) [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[MAXREP64 parameter|MAXREP64]]</var></th>
<td xml:space="preserve">Maximum 64-bit storage for report writers (megabytes) [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[MAXSIMIO parameter|MAXSIMIO]]</var></th>
<td xml:space="preserve">Max simultaneous disk I/Os</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[MAXSPINS parameter|MAXSPINS]]</var></th>
<td xml:space="preserve">Max number of spins for mplock</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[MAXTIME parameter|MAXTIME]]</var></th>
<td xml:space="preserve">Maximum run time</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[MAXTRL parameter|MAXTRL]]</var></th>
<td xml:space="preserve">Max number of trailers</td>
<td xml:space="preserve">User n parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[MAXUD parameter|MAXUD]]</var></th>
<td xml:space="preserve">Long update unit durations (ms)</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[MBSCAN parameter|MBSCAN]]</var></th>
<td xml:space="preserve">Max table B records scan</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[MCNCT parameter|MCNCT]]</var></th>
<td xml:space="preserve">Max connect time</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[MCPU parameter|MCPU]]</var></th>
<td xml:space="preserve">Max CPU time</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[MDKRD parameter|MDKRD]]</var></th>
<td xml:space="preserve">Max disk reads</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[MDKWR parameter|MDKWR]]</var></th>
<td xml:space="preserve">Max disk writes</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[MINBUF parameter|MINBUF]]</var></th>
<td xml:space="preserve">Minimum number of buffers</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[MISCOPT parameter|MISCOPT]]</var></th>
<td xml:space="preserve">Miscellaneous system options [[#Obsolete parameters|(obs)]]</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[MODEL parameter|MODEL]]</var></th>
<td xml:space="preserve">Terminal model</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[MODPROT parameter|MODPROT]]</var></th>
<td xml:space="preserve">204 load module protection flags [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[MODTIM parameter|MODTIM]]</var></th>
<td xml:space="preserve">Julian date-time of Model 204 module</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[MONPARM parameter|MONPARM]]</var></th>
<td xml:space="preserve">SirMon system flags [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[MOUT parameter|MOUT]]</var></th>
<td xml:space="preserve">Max output lines</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[MPOPTS parameter|MPOPTS]]</var></th>
<td xml:space="preserve">MP user language options</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[MPSYS parameter|MPSYS]]</var></th>
<td xml:space="preserve">MP/204 system flags</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[MQBUFSZ parameter|MQBUFSZ]]</var></th>
<td xml:space="preserve">Initial universal buffer size</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[MQDEQMAN parameter|MQDEQMAN]]</var></th>
<td xml:space="preserve">MQ/204 default queue manager</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[MQINTASK parameter|MQINTASK]]</var></th>
<td xml:space="preserve">Initial MQ/204 subtasks</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[MQMXTASK parameter|MQMXTASK]]</var></th>
<td xml:space="preserve">Maximum MQ/204 subtasks</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[MQSUBREL parameter|MQSUBREL]]</var></th>
<td xml:space="preserve">Release MQ subtask (1-release, 0 - retain)</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[MQWAIT parameter|MQWAIT]]</var></th>
<td xml:space="preserve">Maximum wait for MQ/204 subtask</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[MSGCTL parameter|MSGCTL]]</var></th>
<td xml:space="preserve">Message printing options</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[MSRES parameter|MSRES]]</var></th>
<td xml:space="preserve">Maximum SREs per file in RETBL</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[MSTRADD parameter|MSTRADD]]</var></th>
<td xml:space="preserve">Records added to master areas</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[MSTRDEL parameter|MSTRDEL]]</var></th>
<td xml:space="preserve">Records deleted from master areas</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[MUDD parameter|MUDD]]</var></th>
<td xml:space="preserve">Max UDD lines</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[MVFPG parameter|MVFPG]]</var></th>
<td xml:space="preserve">Table A many valued field pages</td>
<td xml:space="preserve">CREATE command</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[MXIJLOG parameter|MXIJLOG]]</var></th>
<td xml:space="preserve">Number of 4k pages for JLOG statistics</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[NBKPG parameter|NBKPG]]</var></th>
<td xml:space="preserve">Number of backpages kept</td>
<td xml:space="preserve">User n parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[NCMPBUF parameter|NCMPBUF]]</var></th>
<td xml:space="preserve">Number of compression buffers [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[NDCBS parameter|NDCBS]]</var></th>
<td xml:space="preserve">Number of file DCBs</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[NDIR parameter|NDIR]]</var></th>
<td xml:space="preserve">Number of file directory entries</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[NECBS parameter|NECBS]]</var></th>
<td xml:space="preserve">Number of ECBs</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[NFILES parameter|NFILES]]</var></th>
<td xml:space="preserve">Number of file areas</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[NGROUP parameter|NGROUP]]</var></th>
<td xml:space="preserve">Max # of open groups</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[NJBUFF parameter|NJBUFF]]</var></th>
<td xml:space="preserve">Number of journal buffers</td>
<td xml:space="preserve">EXEC PARM field</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[NLBUFF parameter|NLBUFF]]</var></th>
<td xml:space="preserve">Number of CCAJLOG buffers</td>
<td xml:space="preserve">EXEC PARM field</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[NLRUQ parameter|NLRUQ]]</var></th>
<td xml:space="preserve"># of DKBM LRU queues</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[NLRUQG parameter|NLRUQG]]</var></th>
<td xml:space="preserve"># of above-the-bar DKBM LRU queues</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[NMPSUBS parameter|NMPSUBS]]</var></th>
<td xml:space="preserve">Number of offload subtasks</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[NMPSUBZ parameter|NMPSUBZ]]</var></th>
<td xml:space="preserve">Number of zIIP eligible subtasks</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[NOECBS parameter|NOECBS]]</var></th>
<td xml:space="preserve">Number of ECBs</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[NORQS parameter|NORQS]]</var></th>
<td xml:space="preserve">Number of requests preserved</td>
<td xml:space="preserve">User n parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[NOTERM parameter|NOTERM]]</var></th>
<td xml:space="preserve">Number of terminals on line</td>
<td xml:space="preserve">User n parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[NOTHREAD parameter|NOTHREAD]]</var></th>
<td xml:space="preserve">Number of inbound threads</td>
<td xml:space="preserve">User n parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[NOUTBUF parameter|NOUTBUF]]</var></th>
<td xml:space="preserve"># of full screen output buffers</td>
<td xml:space="preserve">User n parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[NRMTFILE parameter|NRMTFILE]]</var></th>
<td xml:space="preserve">Number of remote file areas</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[NRMTLOCS parameter|NRMTLOCS]]</var></th>
<td xml:space="preserve">Number of remote locations</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[NSERVS parameter|NSERVS]]</var></th>
<td xml:space="preserve">Number of servers</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[NSUBTKS parameter|NSUBTKS]]</var></th>
<td xml:space="preserve">Max number of pseudo-subtasks</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[NUMBUF parameter|NUMBUF]]</var></th>
<td xml:space="preserve">Number of buffers</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[NUMBUFG parameter|NUMBUFG]]</var></th>
<td xml:space="preserve">Number of above-the-bar buffers</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[NUSERS parameter|NUSERS]]</var></th>
<td xml:space="preserve">Number of users</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[OBJSTAT parameter|OBJSTAT]]</var></th>
<td xml:space="preserve">Sirius object statistic flags [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[OBJSTMIN parameter|OBJSTMIN]]</var></th>
<td xml:space="preserve">Sirius object statistic minimum [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[OIDEPTH parameter|OIDEPTH]]</var></th>
<td xml:space="preserve">No. levels of ordered index nodes</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[OILEAVES parameter|OILEAVES]]</var></th>
<td xml:space="preserve">No. ordered index nodes: leaves</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[OILPACT parameter|OILPACT]]</var></th>
<td xml:space="preserve">Ordered index list page active</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[OINBYTES parameter|OINBYTES]]</var></th>
<td xml:space="preserve">No. ordered index bytes</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[OINENTRY parameter|OINENTRY]]</var></th>
<td xml:space="preserve">No. ordered index entries</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[OINODES parameter|OINODES]]</var></th>
<td xml:space="preserve">No. ordered index nodes: all levels</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[OPENCTL parameter|OPENCTL]]</var></th>
<td xml:space="preserve">Open control flags</td>
<td xml:space="preserve">File manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[OPSYS parameter|OPSYS]]</var></th>
<td xml:space="preserve">Operating system</td>
<td xml:space="preserve">EXEC PARM field</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[OUTCCC parameter|OUTCCC]]</var></th>
<td xml:space="preserve">Output cont char column</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[OUTLPP parameter|OUTLPP]]</var></th>
<td xml:space="preserve">Output lines per page</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[OUTMRL parameter|OUTMRL]]</var></th>
<td xml:space="preserve">Max output record length</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[OUTPNO parameter|OUTPNO]]</var></th>
<td xml:space="preserve">Output page number</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[OUTPUT parameter|OUTPUT]]</var></th>
<td xml:space="preserve">Output device name</td>
<td xml:space="preserve">User n parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[OVFLADD parameter|OVFLADD]]</var></th>
<td xml:space="preserve">Records added to overflow areas</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[OVFLDEL parameter|OVFLDEL]]</var></th>
<td xml:space="preserve">Records deleted from overflow areas</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[PAGE parameter|PAGE]]</var></th>
<td xml:space="preserve">Backpage command character</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[PAGEFIX parameter|PAGEFIX]]</var></th>
<td xml:space="preserve">Page-fix parameter string</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[PAGESZ parameter|PAGESZ]]</var></th>
<td xml:space="preserve">File page size</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[PDSIZE parameter|PDSIZE]]</var></th>
<td xml:space="preserve">Pages per procedure dictionary section</td>
<td xml:space="preserve">CREATE command</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[PDSTRPPG parameter|PDSTRPPG]]</var></th>
<td xml:space="preserve">Names/procedure dictionary page limit</td>
<td xml:space="preserve">CREATE command</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[PERFOPT parameter|PERFOPT]]</var></th>
<td xml:space="preserve">Sirius Performance Enhancement flags [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[PERFOPT2 parameter|PERFOPT2]]</var></th>
<td xml:space="preserve">Sirius Performance Enhancement flags V2 [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[PGSEP parameter|PGSEP]]</var></th>
<td xml:space="preserve">Lines between pages</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[POLLNO parameter|POLLNO]]</var></th>
<td xml:space="preserve">Relative polling number</td>
<td xml:space="preserve">User n parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[PQOOPT parameter|PQOOPT]]</var></th>
<td xml:space="preserve">Parallel query options</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[PQOSYS parameter|PQOSYS]]</var></th>
<td xml:space="preserve">Parallel query system options</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[PRCLDEF parameter|PRCLDEF]]</var></th>
<td xml:space="preserve">Default user class for procedures</td>
<td xml:space="preserve">File manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[PRIOMAX parameter|PRIOMAX]]</var></th>
<td xml:space="preserve">Max age priority</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[PRIORITY parameter|PRIORITY]]</var></th>
<td xml:space="preserve">User priority</td>
<td xml:space="preserve">User n parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[PRIVDEF parameter|PRIVDEF]]</var></th>
<td xml:space="preserve">Default file privileges</td>
<td xml:space="preserve">File manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[PROMPT parameter|PROMPT]]</var></th>
<td xml:space="preserve">Prompt control</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[PUPDTH parameter|PUPDTH]]</var></th>
<td xml:space="preserve">Procedure update hash value [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[PWDEXP parameter|PWDEXP]]</var></th>
<td xml:space="preserve">Password expiration days</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[PWDPURGE parameter|PWDPURGE]]</var></th>
<td xml:space="preserve">Password purge days</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[PWDWARN parameter|PWDWARN]]</var></th>
<td xml:space="preserve">Password warning days</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[RCVOPT parameter|RCVOPT]]</var></th>
<td xml:space="preserve">Recovery options</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[READLVL parameter|READLVL]]</var></th>
<td xml:space="preserve">Default read FLS level</td>
<td xml:space="preserve">File manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[RECLOCKO parameter|RECLOCKO]]</var></th>
<td xml:space="preserve">Record locking options [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[RECRDOPT parameter|RECRDOPT]]</var></th>
<td xml:space="preserve">Record options</td>
<td xml:space="preserve">CREATE command</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[RECSCTY parameter|RECSCTY]]</var></th>
<td xml:space="preserve">Name of file's record security field</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[RECSECID parameter|RECSECID]]</var></th>
<td xml:space="preserve">Record security id</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[RESCURR parameter|RESCURR]]</var></th>
<td xml:space="preserve">Current storage used for resident requests</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[RESHIGH parameter|RESHIGH]]</var></th>
<td xml:space="preserve">HWM for storage used for resident requests</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[RESLTHR parameter|RESLTHR]]</var></th>
<td xml:space="preserve">APSY load threshold for making request resident</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[RESPAGE parameter|RESPAGE]]</var></th>
<td xml:space="preserve">Number of resident N/QTBL ATB pages</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[RESSIZE parameter|RESSIZE]]</var></th>
<td xml:space="preserve">Maximum storage to be used for resident requests</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[RESTARTU parameter|RESTARTU]]</var></th>
<td xml:space="preserve">Restart utility flags [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">EXEC PARM field</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[RESTHRSH parameter|RESTHRSH]]</var></th>
<td xml:space="preserve">Server write threshold for making request resident</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[RETRVBUF parameter|RETRVBUF]]</var></th>
<td xml:space="preserve">Size of retrieve key buffer [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[RETRVKEY parameter|RETRVKEY]]</var></th>
<td xml:space="preserve">Retrieve PF key</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[RETRVOPT parameter|RETRVOPT]]</var></th>
<td xml:space="preserve">Retrieve key options [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[RPTCNT parameter|RPTCNT]]</var></th>
<td xml:space="preserve">Samples between performance stat lines</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SCANPARM parameter|SCANPARM]]</var></th>
<td xml:space="preserve">SirScan system flags [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SCANTIME parameter|SCANTIME]]</var></th>
<td xml:space="preserve">Maximum seconds between SirScan info messages [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SCHDOFL parameter|SCHDOFL]]</var></th>
<td xml:space="preserve">Threshold for activating subtasks</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SCHDOFLZ parameter|SCHDOFLZ]]</var></th>
<td xml:space="preserve">Threshold for activating zIIP subtasks</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SCHDOPT parameter|SCHDOPT]]</var></th>
<td xml:space="preserve">Scheduler options</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SCHDOPT1 parameter|SCHDOPT1]]</var></th>
<td xml:space="preserve">Scheduler options</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SCRNSTBL parameter|SCRNSTBL]]</var></th>
<td xml:space="preserve">STBL size for Screen objects [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SDAEMDEL parameter|SDAEMDEL]]</var></th>
<td xml:space="preserve">SDaemon swap delay (MS) [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SDAEMDEV parameter|SDAEMDEV]]</var></th>
<td xml:space="preserve">IODEV number for SDaemons [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SDEBGUIP parameter|SDEBGUIP]]</var></th>
<td xml:space="preserve">Sirius debug default GUI port number [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SDEBWRKP parameter|SDEBWRKP]]</var></th>
<td xml:space="preserve">Sirius debug default worker port number [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SDMOPT parameter|SDMOPT]]</var></th>
<td xml:space="preserve">SDaemon options [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SECPLIST parameter|SECPLIST]]</var></th>
<td xml:space="preserve">Security parameter-list name for default user</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SECTRLOG parameter|SECTRLOG]]</var></th>
<td xml:space="preserve">Security trusted login environment</td>
<td xml:space="preserve">User n parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SECTY parameter|SECTY]]</var></th>
<td xml:space="preserve">Low-level security in effect</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SELLVL parameter|SELLVL]]</var></th>
<td xml:space="preserve">Default select FLS level</td>
<td xml:space="preserve">File manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SEQOPT parameter|SEQOPT]]</var></th>
<td xml:space="preserve">Sequential processing options</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SEQPDL parameter|SEQPDL]]</var></th>
<td xml:space="preserve">Minimum PDL available for sequencer</td>
<td xml:space="preserve">User n parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SERVACTV parameter|SERVACTV]]</var></th>
<td xml:space="preserve">Current BTB size of this server</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SERVACTG parameter|SERVACTG]]</var></th>
<td xml:space="preserve">Current ATB size of this server</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SERVGA parameter|SERVGA]]</var></th>
<td xml:space="preserve">Above the bar server areas</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SERVGSZ parameter|SERVGSZ]]</var></th>
<td xml:space="preserve">Above the bar server size</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SERVNSA parameter|SERVNSA]]</var></th>
<td xml:space="preserve">Non swappable server areas</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SERVNSSZ parameter|SERVNSSZ]]</var></th>
<td xml:space="preserve">Non swappable server area size</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SERVSIZE parameter|SERVSIZE]]</var></th>
<td xml:space="preserve">Maximum size of this server</td>
<td xml:space="preserve">User n parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SESDEBUG parameter|SESDEBUG]]</var></th>
<td xml:space="preserve">Session debugging flags [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SESDEFOW parameter|SESDEFOW]]</var></th>
<td xml:space="preserve">Default open wait time in seconds [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SESDEFTO parameter|SESDEFTO]]</var></th>
<td xml:space="preserve">Default session timeout seconds [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SESMAXTO parameter|SESMAXTO]]</var></th>
<td xml:space="preserve">Maximum session timeout in seconds [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SESNPRV parameter|SESNPRV]]</var></th>
<td xml:space="preserve">Maximum number of private sessions [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SESNPUB parameter|SESNPUB]]</var></th>
<td xml:space="preserve">Maximum number of public sessions [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SESOPT parameter|SESOPT]]</var></th>
<td xml:space="preserve">Session options [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SESUMAX parameter|SESUMAX]]</var></th>
<td xml:space="preserve">Maximum private sessions per user [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SIOSLICE parameter|SIOSLICE]]</var></th>
<td xml:space="preserve">Server slice - IO</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SIRAPSYF parameter|SIRAPSYF]]</var></th>
<td xml:space="preserve">Sirius APSY flags [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SIRCOMP parameter|SIRCOMP]]</var></th>
<td xml:space="preserve">Sirius compilation flags [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SIREDIT parameter|SIREDIT]]</var></th>
<td xml:space="preserve">Sirius EDIT flags [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SIRFACT parameter|SIRFACT]]</var></th>
<td xml:space="preserve">SirFact flags [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SIRFUNC parameter|SIRFUNC]]</var></th>
<td xml:space="preserve">Function table options [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">EXEC PARM field</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SIRMSG parameter|SIRMSG]]</var></th>
<td xml:space="preserve">Upper casing of msgs/parm descriptions (deprecated - use UPCASMSG) [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SIRPDLHW parameter|SIRPDLHW]]</var></th>
<td xml:space="preserve">Accurate PDL HWM calculation [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SIRPRMPT parameter|SIRPRMPT]]</var></th>
<td xml:space="preserve">Sirius full screen prompt [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SIRTERM parameter|SIRTERM]]</var></th>
<td xml:space="preserve">Sirius terminal options [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SIRTUNE parameter|SIRTUNE]]</var></th>
<td xml:space="preserve">SirTune flags [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">EXEC PARM field</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SLICEMAX parameter|SLICEMAX]]</var></th>
<td xml:space="preserve">Max age slice</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SMFLORN parameter|SMFLORN]]</var></th>
<td xml:space="preserve">SMF logout rec #</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SMFSLRN parameter|SMFSLRN]]</var></th>
<td xml:space="preserve">SMF "since last" rec #</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SMFSVC parameter|SMFSVC]]</var></th>
<td xml:space="preserve">SMF SVC # [[#Obsolete parameters|(obs)]]</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SMPLTIM parameter|SMPLTIM]]</var></th>
<td xml:space="preserve">Performance sample time</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SMTPCADD parameter|SMTPCADD]]</var></th>
<td xml:space="preserve">Default SMTP client address</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SMTPCPRT parameter|SMTPCPRT]]</var></th>
<td xml:space="preserve">Default SMTP client port</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SMTPSADD parameter|SMTPSADD]]</var></th>
<td xml:space="preserve">Default SMTP server address</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SMTPSPRT parameter|SMTPSPRT]]</var></th>
<td xml:space="preserve">Default SMTP server port</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SNAPCLS parameter|SNAPCLS]]</var></th>
<td xml:space="preserve">Class for spun-off snaps</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SNAPCTL parameter|SNAPCTL]]</var></th>
<td xml:space="preserve">Snap/dump options</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SNAPDST parameter|SNAPDST]]</var></th>
<td xml:space="preserve">Destination for spun-off snaps</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SNAPFAIL parameter|SNAPFAIL]]</var></th>
<td xml:space="preserve">Number of CCASNAP failures</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SNAPFLIM parameter|SNAPFLIM]]</var></th>
<td xml:space="preserve">0 or max snap failures allowed</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SNAPID parameter|SNAPID]]</var></th>
<td xml:space="preserve">Number of snaps so far</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SNAPLIM parameter|SNAPLIM]]</var></th>
<td xml:space="preserve">0 or max number of snaps allowed</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SNAPLIMD parameter|SNAPLIMD]]</var></th>
<td xml:space="preserve">0 or max number of occurrences of any particular snap [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SNAPPDLX parameter|SNAPPDLX]]</var></th>
<td xml:space="preserve">Snap pdl extension option</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SOCKMAX parameter|SOCKMAX]]</var></th>
<td xml:space="preserve">Maximum sockets per user [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SORTKEY parameter|SORTKEY]]</var></th>
<td xml:space="preserve">Name of file's sort key field</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SPANSIZE parameter|SPANSIZE]]</var></th>
<td xml:space="preserve">SPANSIZE for date $functions [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SPCORE parameter|SPCORE]]</var></th>
<td xml:space="preserve">Spare core reserved</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SPILLADD parameter|SPILLADD]]</var></th>
<td xml:space="preserve">Spill indicator - adds</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SPILLDEL parameter|SPILLDEL]]</var></th>
<td xml:space="preserve">Spill indicator - deletes</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SQLBSCAN parameter|SQLBSCAN]]</var></th>
<td xml:space="preserve">Max RSQL read/writes</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SQLBUFSZ parameter|SQLBUFSZ]]</var></th>
<td xml:space="preserve">Remote SQL server buffer size</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SQLCNVER parameter|SQLCNVER]]</var></th>
<td xml:space="preserve">SQL fetch option</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SQLFILE parameter|SQLFILE]]</var></th>
<td xml:space="preserve">SQL generated file names</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SQLIQBSZ parameter|SQLIQBSZ]]</var></th>
<td xml:space="preserve">SQL intrnl query buff size</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SQLLPLIM parameter|SQLLPLIM]]</var></th>
<td xml:space="preserve">SQL read/writes per slice</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SRSDEFTO parameter|SRSDEFTO]]</var></th>
<td xml:space="preserve">Default saved record set timeout [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SRSMAX parameter|SRSMAX]]</var></th>
<td xml:space="preserve">Maximum number of saved record sets [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SRSMAXTO parameter|SRSMAXTO]]</var></th>
<td xml:space="preserve">Maximum saved record set timeout [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SRSMAXUS parameter|SRSMAXUS]]</var></th>
<td xml:space="preserve">Maximum saved record sets per user [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SRSPARM parameter|SRSPARM]]</var></th>
<td xml:space="preserve">Saved record set parameters [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SRVSLICE parameter|SRVSLICE]]</var></th>
<td xml:space="preserve">Server slice - CPU</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[STEPNM parameter|STEPNM]]</var></th>
<td xml:space="preserve">Step name</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[STORCUR parameter|STORCUR]]</var></th>
<td xml:space="preserve">Current dynamic storage allocation</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[STORCURG parameter|STORCURG]]</var></th>
<td xml:space="preserve">Current mbytes ATB storage allocated</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[STORINIT parameter|STORINIT]]</var></th>
<td xml:space="preserve">Storage acquired during initialization</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[STORMAX parameter|STORMAX]]</var></th>
<td xml:space="preserve">Dynamic storage high water mark</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[STORMAXG parameter|STORMAXG]]</var></th>
<td xml:space="preserve">HWM mbytes ATB storage allocated</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[STORMXZP parameter|STORMXZP]]</var></th>
<td xml:space="preserve">HWM mbytes storage allocated with 1 MB pages</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[STORZPAG parameter|STORZPAG]]</var></th>
<td xml:space="preserve">Current mbytes storage allocated with 1 MB pages</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SUB parameter|SUB]]</var></th>
<td xml:space="preserve">Substitution control</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SVIOMAXT parameter|SVIOMAXT]]</var></th>
<td xml:space="preserve">Server tracks per user</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SYSDATE parameter|SYSDATE]]</var></th>
<td xml:space="preserve">System initial date</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SYSDINFO parameter|SYSDINFO]]</var></th>
<td xml:space="preserve">System date message</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SYSID parameter|SYSID]]</var></th>
<td xml:space="preserve">SMF system identification</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SYSOPT parameter|SYSOPT]]</var></th>
<td xml:space="preserve">System options</td>
<td xml:space="preserve">EXEC PARM field</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SYSOPT2 parameter|SYSOPT2]]</var></th>
<td xml:space="preserve">System options</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SYSTIME parameter|SYSTIME]]</var></th>
<td xml:space="preserve">System initial time</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[TABSP parameter|TABSP]]</var></th>
<td xml:space="preserve">Tab spacing</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[TCPNAME parameter|TCPNAME]]</var></th>
<td xml:space="preserve">TCP/IP service machine name</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[TCPOPTS parameter|TCPOPTS]]</var></th>
<td xml:space="preserve">TCP options</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[TCPSERV parameter|TCPSERV]]</var></th>
<td xml:space="preserve">Name of TCP/IP server address space [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[TCPSUBSY parameter|TCPSUBSY]]</var></th>
<td xml:space="preserve">Subsystem name for TCP/IP server [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[TCPTYPE parameter|TCPTYPE]]</var></th>
<td xml:space="preserve">Type of TCP/IP server address space [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[TEMPBOP parameter|TEMPBOP]]</var></th>
<td xml:space="preserve">Number of CCATEMP pages reserved for backout data</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[TEMPCUR parameter|TEMPCUR]]</var></th>
<td xml:space="preserve">CCATEMP pages currently in use</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[TEMPCURE parameter|TEMPCURE]]</var></th>
<td xml:space="preserve">CCATEMP pages currently in use (expansion area)</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[TEMPCURS parameter|TEMPCURS]]</var></th>
<td xml:space="preserve">CCATEMP pages currently in use (small model page pool)</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[TEMPHIE parameter|TEMPHIE]]</var></th>
<td xml:space="preserve">CCATEMP HWM pages used (expansion area)</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[TEMPHIS parameter|TEMPHIS]]</var></th>
<td xml:space="preserve">CCATEMP HWM pages used (small model page pool)</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[TEMPMAX parameter|TEMPMAX]]</var></th>
<td xml:space="preserve">CCATEMP highest number of pages used</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[TEMPPAGE parameter|TEMPPAGE]]</var></th>
<td xml:space="preserve">Number of CCATEMP pages in storage</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[TEMPSIZE parameter|TEMPSIZE]]</var></th>
<td xml:space="preserve">CCATEMP size in pages</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[TERMBUF parameter|TERMBUF]]</var></th>
<td xml:space="preserve"># of full screen input buffers</td>
<td xml:space="preserve">User n parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[TERMID parameter|TERMID]]</var></th>
<td xml:space="preserve">Terminal id</td>
<td xml:space="preserve">User n parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[TERMOPT parameter|TERMOPT]]</var></th>
<td xml:space="preserve">Terminal options</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[TIMELEF parameter|TIMELEF]]</var></th>
<td xml:space="preserve">Time left before end of run</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[TIMEOUT parameter|TIMEOUT]]</var></th>
<td xml:space="preserve">Inactive thread timeout in seconds</td>
<td xml:space="preserve">User n parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[TIMESTOP parameter|TIMESTOP]]</var></th>
<td xml:space="preserve">Time allowed for termination</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[TIMESVC parameter|TIMESVC]]</var></th>
<td xml:space="preserve">CCA timing SVC #</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[TNDEV parameter|TNDEV]]</var></th>
<td xml:space="preserve">IODEV number for TNSERV threads [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[UBUFSZ parameter|UBUFSZ]]</var></th>
<td xml:space="preserve">Initial universal buffer size</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[UCPUSLIC parameter|UCPUSLIC]]</var></th>
<td xml:space="preserve">User CPU slice</td>
<td xml:space="preserve">User n parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[UDDCCC parameter|UDDCCC]]</var></th>
<td xml:space="preserve">USE DDNAME - cont char column</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[UDDLPP parameter|UDDLPP]]</var></th>
<td xml:space="preserve">USE DDNAME - lines per page</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[UDDRFM parameter|UDDRFM]]</var></th>
<td xml:space="preserve">USE DDNAME - record format</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[UFEOHASH parameter|UFEOHASH]]</var></th>
<td xml:space="preserve">Unlocked FEO hash table size</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[UFEOMISS parameter|UFEOMISS]]</var></th>
<td xml:space="preserve">Number of unlocked FEO misses</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[UIOSLIC parameter|UIOSLIC]]</var></th>
<td xml:space="preserve">User I/O slice</td>
<td xml:space="preserve">User n parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[ULTRACE parameter|ULTRACE]]</var></th>
<td xml:space="preserve">UL Trace statement flags [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[ULTRACEP parameter|ULTRACEP]]</var></th>
<td xml:space="preserve">Max UL Trace statement pages [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[UPCASMSG parameter|UPCASMSG]]</var></th>
<td xml:space="preserve">Upper casing of msgs/parm descriptions</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[UPDTID parameter|UPDTID]]</var></th>
<td xml:space="preserve">User current update id</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[UPDTLVL parameter|UPDTLVL]]</var></th>
<td xml:space="preserve">Default update FLS level</td>
<td xml:space="preserve">File manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[UPRIV parameter|UPRIV]]</var></th>
<td xml:space="preserve">User privilege bits</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[USERID parameter|USERID]]</var></th>
<td xml:space="preserve">User id</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[USLCMAX parameter|USLCMAX]]</var></th>
<td xml:space="preserve">User slice max to CSLICE</td>
<td xml:space="preserve">User n parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[USLCWAIT parameter|USLCWAIT]]</var></th>
<td xml:space="preserve">User slice wait time</td>
<td xml:space="preserve">User n parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[VDP parameter|VDP]]</var></th>
<td xml:space="preserve">Default %var decimal places</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[VERIFY parameter|VERIFY]]</var></th>
<td xml:space="preserve">Write verify</td>
<td xml:space="preserve">File manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[VERSION parameter|VERSION]]</var></th>
<td xml:space="preserve">Release of Model 204</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[VLEN parameter|VLEN]]</var></th>
<td xml:space="preserve">Default %var length</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[VMFSCHNL parameter|VMFSCHNL]]</var></th>
<td xml:space="preserve">VMCF display mode channel name</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[VMIFCHNL parameter|VMIFCHNL]]</var></th>
<td xml:space="preserve">VMCF IFAM channel name</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[VMIOCHNL parameter|VMIOCHNL]]</var></th>
<td xml:space="preserve">VMCF line mode channel name</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[VTAMNAME parameter|VTAMNAME]]</var></th>
<td xml:space="preserve">VTAM application name</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[VTAMNTO parameter|VTAMNTO]]</var></th>
<td xml:space="preserve">VTAM NTO application name</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[VTGCSSRV parameter|VTGCSSRV]]</var></th>
<td xml:space="preserve">GCS service VM for VTAM terminals</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[VTLAPSY parameter|VTLAPSY]]</var></th>
<td xml:space="preserve">Login APSY for VT75 terminals [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[VTYPE parameter|VTYPE]]</var></th>
<td xml:space="preserve">Default %var type</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[WAITSCAN parameter|WAITSCAN]]</var></th>
<td xml:space="preserve">Wait scan interval</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[WAITTIME parameter|WAITTIME]]</var></th>
<td xml:space="preserve">Wait time in seconds for a response</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[WEBAUDIT parameter|WEBAUDIT]]</var></th>
<td xml:space="preserve">Janus Web audit trail reduction flags [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[WEBOPT parameter|WEBOPT]]</var></th>
<td xml:space="preserve">Miscellaneous Janus Web options [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[XAUTOINC parameter|XAUTOINC]]</var></th>
<td xml:space="preserve">Number of pages for table X auto increase</td>
<td xml:space="preserve">File manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[XDMSSN parameter|XDMSSN]]</var></th>
<td xml:space="preserve">XDM subsystem</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[XHIGHPG parameter|XHIGHPG]]</var></th>
<td xml:space="preserve">Table X highest active page</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[XMEMOPT parameter|XMEMOPT]]</var></th>
<td xml:space="preserve">Cross-memory PC options</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[XMEMSVC parameter|XMEMSVC]]</var></th>
<td xml:space="preserve">Cross-memory SVC #</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[XQLEN parameter|XQLEN]]</var></th>
<td xml:space="preserve">Table X queue length</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[XRECPPG parameter|XRECPPG]]</var></th>
<td xml:space="preserve">Table X slots per page</td>
<td xml:space="preserve">CREATE command</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[XRESERVE parameter|XRESERVE]]</var></th>
<td xml:space="preserve">Table X reserve space per page</td>
<td xml:space="preserve">File manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[XREUSE parameter|XREUSE]]</var></th>
<td xml:space="preserve">Free space required to reuse table X page</td>
<td xml:space="preserve">File manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[XREUSED parameter|XREUSED]]</var></th>
<td xml:space="preserve">Extension slots reused in table X</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[XSIZE parameter|XSIZE]]</var></th>
<td xml:space="preserve">Pages in table X</td>
<td xml:space="preserve">CREATE command</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[ZPAGEOPT parameter|ZPAGEOPT]]</var></th>
<td xml:space="preserve">1 mb page areas</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[ZQMAX parameter|ZQMAX]]</var></th>
<td xml:space="preserve">Z queue max length</td>
<td xml:space="preserve">System manager</td>
</tr>
</table>
</div>

SERVACTV parameter

2015-01-27T21:26:10Z

DVRICKP:

{{Template:SERVACTV parameter subtitle}}
==Summary==
<dl>
<dt>Default value
<dd>None
<dt>Parameter type
<dd>Utable
<dt>Where set
<dd>View-only
<dt>Related products
<dd>All
<dt>Introduced
<dd><var class="product">Model 204 V6.1</var> or earlier
</dl>
==Description==
The swappable size, in bytes, of the BTB server area being used by the current user
The server area size actually in use frequently differs from the value specified in the SERVSIZE parameter. SERVACTV, which is readily viewable, shows the size of the currently active server. 
[[Category:Utable parameters]]
[[Category:Parameters]]

LSERVER parameter

2015-01-27T21:23:16Z

DVRICKP:

{{Template:LSERVER parameter subtitle}}
==Summary==
<dl>
<dt>Default value
<dd>None
<dt>Parameter type
<dd>Utable
<dt>Where set
<dd>View-only
<dt>Related products
<dd>All
<dt>Introduced
<dd><var class="product">Model 204 V6.1</var> or earlier
</dl>

==Description==

The current server size required for the user's tables in the BTB (below the bar) server. 

A table of maximum server sizes appears in [[Defining the runtime environment (CCAIN)#Server areas|Server areas]]. 

[[Category:Utable parameters]]
[[Category:Parameters]]

LSERVER parameter

2015-01-27T21:22:49Z

DVRICKP:

{{Template:LSERVER parameter subtitle}}
==Summary==
<dl>
<dt>Default value
<dd>None
<dt>Parameter type
<dd>Utable
<dt>Where set
<dd>View-only
<dt>Related products
<dd>All
<dt>Introduced
<dd><var class="product">Model 204 V6.1</var> or earlier
</dl>

==Description==

The current server size required for the user's tables in the BTB (below the bar) area. 

A table of maximum server sizes appears in [[Defining the runtime environment (CCAIN)#Server areas|Server areas]]. 

[[Category:Utable parameters]]
[[Category:Parameters]]

LSERVER parameter

2015-01-27T21:21:32Z

DVRICKP:

{{Template:LSERVER parameter subtitle}}
==Summary==
<dl>
<dt>Default value
<dd>None
<dt>Parameter type
<dd>Utable
<dt>Where set
<dd>View-only
<dt>Related products
<dd>All
<dt>Introduced
<dd><var class="product">Model 204 V6.1</var> or earlier
</dl>

==Description==

The current server size required for the user's tables in the BTB area. 

A table of maximum server sizes appears in [[Defining the runtime environment (CCAIN)#Server areas|Server areas]]. 

[[Category:Utable parameters]]
[[Category:Parameters]]

Template:List of M204 parameters

2015-01-27T21:20:02Z

DVRICKP:

<div class="showVisit">
<table>
<tr class="head">
<th>Parameter name</th>
<th>Description</th>
<th>Set/reset type</th>
</tr>
<tr>
<th xml:space="preserve"><var>[[ACCOUNT parameter|ACCOUNT]]</var></th>
<td xml:space="preserve">Billing account</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[ACCTIM parameter|ACCTIM]]</var></th>
<td xml:space="preserve">Time before partial stat lines</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[ACTRDS parameter|ACTRDS]]</var></th>
<td xml:space="preserve">Active RSA subtasks [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[ADDLVL parameter|ADDLVL]]</var></th>
<td xml:space="preserve">Default add FLS level</td>
<td xml:space="preserve">File manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[AGEINCR parameter|AGEINCR]]</var></th>
<td xml:space="preserve">Aging priority increment</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[AGEINTVL parameter|AGEINTVL]]</var></th>
<td xml:space="preserve">Aging interval</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[AGESCAN parameter|AGESCAN]]</var></th>
<td xml:space="preserve">Age scan interval</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[AGESLICE parameter|AGESLICE]]</var></th>
<td xml:space="preserve">Aging slice increment</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[ALOCPRIV parameter|ALOCPRIV]]</var></th>
<td xml:space="preserve">Allocate privilege requirement</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[ALTIODEV parameter|ALTIODEV]]</var></th>
<td xml:space="preserve">Alternate user zero IODEV</td>
<td xml:space="preserve">EXEC PARM field</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[AMPSUBS parameter|AMPSUBS]]</var></th>
<td xml:space="preserve">Number of active offload subtasks</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[AMPSUBZ parameter|AMPSUBZ]]</var></th>
<td xml:space="preserve">Number of active zIIP eligible subtasks</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[APSYPAGE parameter|APSYPAGE]]</var></th>
<td xml:space="preserve">Number of APSY pages in hiperspace</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[APSYSEC parameter|APSYSEC]]</var></th>
<td xml:space="preserve">Sirius APSY security flags [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[APSYXMM parameter|APSYXMM]]</var></th>
<td xml:space="preserve">Expanded storage megabytes for saved APSY compilations [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[ARETRIES parameter|ARETRIES]]</var></th>
<td xml:space="preserve">Table A page retries</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[ASIZE parameter|ASIZE]]</var></th>
<td xml:space="preserve">Pages in table A</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[ASTRPPG parameter|ASTRPPG]]</var></th>
<td xml:space="preserve">Table A strings per page</td>
<td xml:space="preserve">CREATE command</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[ATRPG parameter|ATRPG]]</var></th>
<td xml:space="preserve">Table A attribute pages</td>
<td xml:space="preserve">CREATE command</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[AUDITOPT parameter|AUDITOPT]]</var></th>
<td xml:space="preserve">Audit options</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[AUTOGCN parameter|AUTOGCN]]</var></th>
<td xml:space="preserve">Garbage collection threshold [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[AUTOSYS parameter|AUTOSYS]]</var></th>
<td xml:space="preserve">Automatic subsystem</td>
<td xml:space="preserve">User n parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[B24EXCWT parameter|B24EXCWT]]</var></th>
<td xml:space="preserve">BATCH204 wait time(ms) between M204.0583 msgs</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[B24SHRWT parameter|B24SHRWT]]</var></th>
<td xml:space="preserve">BATCH204 wait time(ms) between M204.0582 msgs</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[BASECENT parameter|BASECENT]]</var></th>
<td xml:space="preserve">CENTSPLT base century</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[BAUTOINC parameter|BAUTOINC]]</var></th>
<td xml:space="preserve">Number of pages for table B auto increase</td>
<td xml:space="preserve">File manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[BAUTOTYP parameter|BAUTOTYP]]</var></th>
<td xml:space="preserve">Table B auto increase options [[#Obsolete parameters|(obs)]]</td>
<td xml:space="preserve">File manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[BEXTOVFL parameter|BEXTOVFL]]</var></th>
<td xml:space="preserve">Table B extra overflow areas</td>
<td xml:space="preserve">CREATE command</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[BHIGHPG parameter|BHIGHPG]]</var></th>
<td xml:space="preserve">Table B highest active page</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[BIGOBJL parameter|BIGOBJL]]</var></th>
<td xml:space="preserve">Size of object list considered big [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[BLOWPG parameter|BLOWPG]]</var></th>
<td xml:space="preserve">Table B lowest active page</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[BPGPMSTR parameter|BPGPMSTR]]</var></th>
<td xml:space="preserve">Table B pages/master area</td>
<td xml:space="preserve">CREATE command</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[BPGPOVFL parameter|BPGPOVFL]]</var></th>
<td xml:space="preserve">Table B pages/overflow area</td>
<td xml:space="preserve">CREATE command</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[BQLEN parameter|BQLEN]]</var></th>
<td xml:space="preserve">Table B queue length</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[BRECPPG parameter|BRECPPG]]</var></th>
<td xml:space="preserve">Table B records per page</td>
<td xml:space="preserve">CREATE command</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[BRESERVE parameter|BRESERVE]]</var></th>
<td xml:space="preserve">Table B reserve space</td>
<td xml:space="preserve">File manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[BREUSE parameter|BREUSE]]</var></th>
<td xml:space="preserve">Free space required to reuse table B page</td>
<td xml:space="preserve">File manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[BREUSED parameter|BREUSED]]</var></th>
<td xml:space="preserve">Records added reusing record numbers</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[BRLIMSZ parameter|BRLIMSZ]]</var></th>
<td xml:space="preserve">Table B record limit size</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[BSIZE parameter|BSIZE]]</var></th>
<td xml:space="preserve">Pages in table B</td>
<td xml:space="preserve">CREATE command</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[CACHE parameter|CACHE]]</var></th>
<td xml:space="preserve">Cache fast write</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[CASE parameter|CASE]]</var></th>
<td xml:space="preserve">Text input case</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[CAUDIT parameter|CAUDIT]]</var></th>
<td xml:space="preserve">Card audit bits</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[CDMAXP2X parameter|CDMAXP2X]]</var></th>
<td xml:space="preserve">Maximum constraints pages power of 2</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[CDMINP2X parameter|CDMINP2X]]</var></th>
<td xml:space="preserve">Minimum constraints pages power of 2</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[CECHO parameter|CECHO]]</var></th>
<td xml:space="preserve">Card echo</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[CEECHO parameter|CEECHO]]</var></th>
<td xml:space="preserve">Card edit echo</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[CENTSPAN parameter|CENTSPAN]]</var></th>
<td xml:space="preserve">CENTSPAN for date $functions [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[CENTSPLT parameter|CENTSPLT]]</var></th>
<td xml:space="preserve">Century year split</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[CFRJRNL parameter|CFRJRNL]]</var></th>
<td xml:space="preserve">CFR+rec locking stats to CCAJRNL</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[CFRLOOK parameter|CFRLOOK]]</var></th>
<td xml:space="preserve">CFR+rec locking stats to monitor</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[CFRWPCT parameter|CFRWPCT]]</var></th>
<td xml:space="preserve">Max nonswappable CFR waiters</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[CHKPRIV parameter|CHKPRIV]]</var></th>
<td xml:space="preserve">Checkpoint privilege requirement</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[CMSVERSN parameter|CMSVERSN]]</var></th>
<td xml:space="preserve">Version of the CMS interface</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[COMEND parameter|COMEND]]</var></th>
<td xml:space="preserve">End of comment block</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[COMMAND parameter|COMMAND]]</var></th>
<td xml:space="preserve">Model204 command table</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[COMMLOG parameter|COMMLOG]]</var></th>
<td xml:space="preserve">$Command login flags [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[COMPERR parameter|COMPERR]]</var></th>
<td xml:space="preserve">Compiler error reporting options</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[COMPOPT parameter|COMPOPT]]</var></th>
<td xml:space="preserve">Compiler options [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[COMSTART parameter|COMSTART]]</var></th>
<td xml:space="preserve">Start of comment block</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[CP3270 parameter|CP3270]]</var></th>
<td xml:space="preserve">3270 code page ID [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[CPMAX parameter|CPMAX]]</var></th>
<td xml:space="preserve">Max # of checkpoints</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[CPQZACTN parameter|CPQZACTN]]</var></th>
<td xml:space="preserve">Checkpoint extended quiesce timeout action</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[CPQZSECS parameter|CPQZSECS]]</var></th>
<td xml:space="preserve">Number of seconds before CPQZACTN</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[CPSORT parameter|CPSORT]]</var></th>
<td xml:space="preserve">IFAM2 CHKP signon tries</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[CPTIME parameter|CPTIME]]</var></th>
<td xml:space="preserve">Minutes between checkpoints</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[CPTO parameter|CPTO]]</var></th>
<td xml:space="preserve">Checkpoint timeout in seconds</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[CPTQ parameter|CPTQ]]</var></th>
<td xml:space="preserve">Batch quiesce timeout in seconds</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[CPTS parameter|CPTS]]</var></th>
<td xml:space="preserve">Sub-transaction timeout in seconds</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[CPTYPE parameter|CPTYPE]]</var></th>
<td xml:space="preserve">Checkpoint type</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[CPUSLICE parameter|CPUSLICE]]</var></th>
<td xml:space="preserve">CPU slice - CPU</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[CRETRIES parameter|CRETRIES]]</var></th>
<td xml:space="preserve">Table C page retries</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[CRFSCHNL parameter|CRFSCHNL]]</var></th>
<td xml:space="preserve">Full screen CRAM name</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[CRIOCHNL parameter|CRIOCHNL]]</var></th>
<td xml:space="preserve">User language CRAM channel name</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[CS3270 parameter|CS3270]]</var></th>
<td xml:space="preserve">3270 character set ID [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[CSECHO parameter|CSECHO]]</var></th>
<td xml:space="preserve">Card substitution echo</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[CSIPID parameter|CSIPID]]</var></th>
<td xml:space="preserve">TCP/IP system ID [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[CSIZE parameter|CSIZE]]</var></th>
<td xml:space="preserve">Pages in table C</td>
<td xml:space="preserve">CREATE command</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[CURALVL parameter|CURALVL]]</var></th>
<td xml:space="preserve">Add FLS level for file/group</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[CURCLASS parameter|CURCLASS]]</var></th>
<td xml:space="preserve">User priv class (proc) for file/group</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[CURFILE parameter|CURFILE]]</var></th>
<td xml:space="preserve">Current file</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[CURLOC parameter|CURLOC]]</var></th>
<td xml:space="preserve">CURFILE location if remote</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[CURPRIV parameter|CURPRIV]]</var></th>
<td xml:space="preserve">Privs for current file/group</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[CURREC parameter|CURREC]]</var></th>
<td xml:space="preserve">Current record number</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[CURREP31 parameter|CURREP31]]</var></th>
<td xml:space="preserve">Current 31-bit storage for report writers (megabytes) [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[CURREP64 parameter|CURREP64]]</var></th>
<td xml:space="preserve">Current 64-bit storage for report writers (megabytes) [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[CURRLVL parameter|CURRLVL]]</var></th>
<td xml:space="preserve">Read FLS level for file/group</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[CURSLVL parameter|CURSLVL]]</var></th>
<td xml:space="preserve">Select FLS level for file/group</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[CURULVL parameter|CURULVL]]</var></th>
<td xml:space="preserve">Update FLS level for file/group</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[CUSTOM parameter|CUSTOM]]</var></th>
<td xml:space="preserve">Enable special modifications to Model 204</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[D$ONEOF parameter|D$ONEOF]]</var></th>
<td xml:space="preserve">$OneOf item delimiter</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[DACTIVE parameter|DACTIVE]]</var></th>
<td xml:space="preserve">List page active</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[DAUTOINC parameter|DAUTOINC]]</var></th>
<td xml:space="preserve">Number of pages for table D auto increase</td>
<td xml:space="preserve">File manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[DB2PLAN parameter|DB2PLAN]]</var></th>
<td xml:space="preserve">DB2 plan name</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[DB2POINT parameter|DB2POINT]]</var></th>
<td xml:space="preserve">Exec DB2 decimal point</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[DB2QUOTE parameter|DB2QUOTE]]</var></th>
<td xml:space="preserve">Exec DB2 quote</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[DB2THRD parameter|DB2THRD]]</var></th>
<td xml:space="preserve">Number of DB2 threads</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[DEBUGMAX parameter|DEBUGMAX]]</var></th>
<td xml:space="preserve">Maximum debug worker threads [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[DEBUGPAG parameter|DEBUGPAG]]</var></th>
<td xml:space="preserve">Maximum debug CCATEMP pages [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[DEBUGUL parameter|DEBUGUL]]</var></th>
<td xml:space="preserve">User language debug options</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[DEFCENT parameter|DEFCENT]]</var></th>
<td xml:space="preserve">Default century</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[DEFINCP parameter|DEFINCP]]</var></th>
<td xml:space="preserve">Default automatic table size pct increase</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[DHIGHPG parameter|DHIGHPG]]</var></th>
<td xml:space="preserve">Table D highest page used</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[DKUPDTWT parameter|DKUPDTWT]]</var></th>
<td xml:space="preserve"># seconds after file's last update before file is updated on disk</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[DPGSRES parameter|DPGSRES]]</var></th>
<td xml:space="preserve">Table D pages reserved</td>
<td xml:space="preserve">File manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[DPGSUSED parameter|DPGSUSED]]</var></th>
<td xml:space="preserve">Table D pages in use</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[DRESERVE parameter|DRESERVE]]</var></th>
<td xml:space="preserve">List page reserve space</td>
<td xml:space="preserve">File manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[DSIZE parameter|DSIZE]]</var></th>
<td xml:space="preserve">Pages in table D</td>
<td xml:space="preserve">CREATE command</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[DSPOPT parameter|DSPOPT]]</var></th>
<td xml:space="preserve">Data space options</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[DTS parameter|DTS]]</var></th>
<td xml:space="preserve">Date time stamp updates (1=automatic, 0=bypassed)</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[DTSFN parameter|DTSFN]]</var></th>
<td xml:space="preserve">Date time stamp field name</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[DUFILES parameter|DUFILES]]</var></th>
<td xml:space="preserve">Files open in deferred update mode</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[DUMPAOPT parameter|DUMPAOPT]]</var></th>
<td xml:space="preserve">MP altpdl dump options</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[DUMPMOPT parameter|DUMPMOPT]]</var></th>
<td xml:space="preserve">MP maintask dump options</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[DUMPOPTS parameter|DUMPOPTS]]</var></th>
<td xml:space="preserve">Fast Backup/Restore flags [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[DUMPSOPT parameter|DUMPSOPT]]</var></th>
<td xml:space="preserve">MP subtask dump options</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[DUMPTMAX parameter|DUMPTMAX]]</var></th>
<td xml:space="preserve">Maximum CCATEMP usage for DUMP [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[DUMPTMIN parameter|DUMPTMIN]]</var></th>
<td xml:space="preserve">Minimum free CCATEMP for DUMP [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[DUPTERM parameter|DUPTERM]]</var></th>
<td xml:space="preserve">Number of duplicate terminals</td>
<td xml:space="preserve">User n parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[DVADD parameter|DVADD]]</var></th>
<td xml:space="preserve">Device address</td>
<td xml:space="preserve">User n parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[ECISUBS parameter|ECISUBS]]</var></th>
<td xml:space="preserve">ECF initial subtasks</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[ECMODS parameter|ECMODS]]</var></th>
<td xml:space="preserve">ECF maximum modules loaded</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[ECMSUBS parameter|ECMSUBS]]</var></th>
<td xml:space="preserve">ECF maximum subtasks</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[ECNAMES parameter|ECNAMES]]</var></th>
<td xml:space="preserve">ECF maximum call names</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[ECPRIV parameter|ECPRIV]]</var></th>
<td xml:space="preserve">ECF privileges</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[ECPSIZE parameter|ECPSIZE]]</var></th>
<td xml:space="preserve">ECF initial parameter area allocation</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[ECWAIT parameter|ECWAIT]]</var></th>
<td xml:space="preserve">ECF maximum wait for external call</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[EDIT parameter|EDIT]]</var></th>
<td xml:space="preserve">Edit control</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[EHIGHPG parameter|EHIGHPG]]</var></th>
<td xml:space="preserve">Table E highest page used</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[ENQRETRY parameter|ENQRETRY]]</var></th>
<td xml:space="preserve">Retry record locking</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[ENTTAB parameter|ENTTAB]]</var></th>
<td xml:space="preserve">Default entity translation table [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[EOJPW parameter|EOJPW]]</var></th>
<td xml:space="preserve">EOJ password</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[EOVFLADD parameter|EOVFLADD]]</var></th>
<td xml:space="preserve">Records added to extra overflow areas</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[EOVFLDEL parameter|EOVFLDEL]]</var></th>
<td xml:space="preserve">Records deleted from ext ovflow areas</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[EPGSUSED parameter|EPGSUSED]]</var></th>
<td xml:space="preserve">Table E pages in use</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[ERASE parameter|ERASE]]</var></th>
<td xml:space="preserve">Erase-character symbol</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[ERCNT parameter|ERCNT]]</var></th>
<td xml:space="preserve">Error count [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[ERMX parameter|ERMX]]</var></th>
<td xml:space="preserve">Maximum number of errors</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[ERRLEN parameter|ERRLEN]]</var></th>
<td xml:space="preserve">Length of errors saved</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[ERRMSGL parameter|ERRMSGL]]</var></th>
<td xml:space="preserve">Saved error message length</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[ERRSAVE parameter|ERRSAVE]]</var></th>
<td xml:space="preserve">No of errors saved</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[ESIZE parameter|ESIZE]]</var></th>
<td xml:space="preserve">Pages in table E</td>
<td xml:space="preserve">CREATE command</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[EXCPVR parameter|EXCPVR]]</var></th>
<td xml:space="preserve">EXCPVR appendage id</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[EXTNADD parameter|EXTNADD]]</var></th>
<td xml:space="preserve">Extension records added</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[EXTNDEL parameter|EXTNDEL]]</var></th>
<td xml:space="preserve">Extension records deleted</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[FACTDEB parameter|FACTDEB]]</var></th>
<td xml:space="preserve">SirFact debugging flags [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[FASTGLOB parameter|FASTGLOB]]</var></th>
<td xml:space="preserve">Fast global processing</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[FICREATE parameter|FICREATE]]</var></th>
<td xml:space="preserve">Create format</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[FIFLAGS parameter|FIFLAGS]]</var></th>
<td xml:space="preserve">File status switches</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[FIFORMAT parameter|FIFORMAT]]</var></th>
<td xml:space="preserve">Current FPL format</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[FILEMODL parameter|FILEMODL]]</var></th>
<td xml:space="preserve">File model enforced</td>
<td xml:space="preserve">File manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[FILEORG parameter|FILEORG]]</var></th>
<td xml:space="preserve">File organization</td>
<td xml:space="preserve">CREATE command</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[FISTAT parameter|FISTAT]]</var></th>
<td xml:space="preserve">Current status of file</td>
<td xml:space="preserve">File manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[FITRANS parameter|FITRANS]]</var></th>
<td xml:space="preserve">Transform format</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[FIXSIZE parameter|FIXSIZE]]</var></th>
<td xml:space="preserve">Fixed server size requirement</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[FLUSH parameter|FLUSH]]</var></th>
<td xml:space="preserve">Erase-line symbol</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[FNVMASK parameter|FNVMASK]]</var></th>
<td xml:space="preserve">Filename version mask [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[FOPT parameter|FOPT]]</var></th>
<td xml:space="preserve">File options</td>
<td xml:space="preserve">File manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[FRCVOPT parameter|FRCVOPT]]</var></th>
<td xml:space="preserve">File recovery options</td>
<td xml:space="preserve">File manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[FREESIZE parameter|FREESIZE]]</var></th>
<td xml:space="preserve">Pages in free space</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[FRELPREV parameter|FRELPREV]]</var></th>
<td xml:space="preserve">Fast/Reload previous request number [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[FSATTN parameter|FSATTN]]</var></th>
<td xml:space="preserve">Full screen attention key</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[FSOUTPUT parameter|FSOUTPUT]]</var></th>
<td xml:space="preserve">Full screen color and highlighting</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[FSTRMOPT parameter|FSTRMOPT]]</var></th>
<td xml:space="preserve">Full screen terminal options</td>
<td xml:space="preserve">User n parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[FUNCOPTS parameter|FUNCOPTS]]</var></th>
<td xml:space="preserve">Sirius function flags [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[FUNMAXT parameter|FUNMAXT]]</var></th>
<td xml:space="preserve">Default Fast/Unload request timeout (seconds) [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[FUNPARM parameter|FUNPARM]]</var></th>
<td xml:space="preserve">Fast/Unload system flags [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[FUNPGM parameter|FUNPGM]]</var></th>
<td xml:space="preserve">Name of Fast/Unload load module [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[FUNPRMU parameter|FUNPRMU]]</var></th>
<td xml:space="preserve">Fast/Unload user flags [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[FUNTSKN parameter|FUNTSKN]]</var></th>
<td xml:space="preserve">Maximum Fast/Unload tasks [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[FVFPG parameter|FVFPG]]</var></th>
<td xml:space="preserve">Table A few valued field pages</td>
<td xml:space="preserve">CREATE command</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[GCSTATS parameter|GCSTATS]]</var></th>
<td xml:space="preserve">Garbage collector statistics [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[GTBLHASH parameter|GTBLHASH]]</var></th>
<td xml:space="preserve">Number of hashed GTBL buckets</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[GTBLPCT parameter|GTBLPCT]]</var></th>
<td xml:space="preserve">Initial GTBL percentage to allocate for plain globals</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[HASHCELL parameter|HASHCELL]]</var></th>
<td xml:space="preserve">Hash cells per buffer</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[HASHKEY parameter|HASHKEY]]</var></th>
<td xml:space="preserve">Name of file's hash key field</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[HASHSPIL parameter|HASHSPIL]]</var></th>
<td xml:space="preserve">Hash file spill chain length</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[HDRCTL parameter|HDRCTL]]</var></th>
<td xml:space="preserve">Header control</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[HGHREP31 parameter|HGHREP31]]</var></th>
<td xml:space="preserve">High 31-bit storage for report writers (megabytes) [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[HGHREP64 parameter|HGHREP64]]</var></th>
<td xml:space="preserve">High 64-bit storage for report writers (megabytes) [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[HIGHSORT parameter|HIGHSORT]]</var></th>
<td xml:space="preserve">Record with highest sort key</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[HTLEN parameter|HTLEN]]</var></th>
<td xml:space="preserve">Max length of each header or trailer</td>
<td xml:space="preserve">User n parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[IFAMBS parameter|IFAMBS]]</var></th>
<td xml:space="preserve">IFAM2 buffer size</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[IFAMCHNL parameter|IFAMCHNL]]</var></th>
<td xml:space="preserve">IFAM2 CRAM channel name</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[INCCC parameter|INCCC]]</var></th>
<td xml:space="preserve">Input cont char column</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[INCSLICE parameter|INCSLICE]]</var></th>
<td xml:space="preserve">Include slicing limit</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[INMRL parameter|INMRL]]</var></th>
<td xml:space="preserve">Max input record length</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[INPUT parameter|INPUT]]</var></th>
<td xml:space="preserve">Input device name</td>
<td xml:space="preserve">User n parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[IODEV parameter|IODEV]]</var></th>
<td xml:space="preserve">Type of I/O device</td>
<td xml:space="preserve">User n parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[IOSLICE parameter|IOSLICE]]</var></th>
<td xml:space="preserve">CPU slice - IO</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[IPADDR parameter|IPADDR]]</var></th>
<td xml:space="preserve">IP address</td>
<td xml:space="preserve">User n parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[IVERIFY parameter|IVERIFY]]</var></th>
<td xml:space="preserve">Write verify - initialization</td>
<td xml:space="preserve">CREATE command</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[JANDEBM parameter|JANDEBM]]</var></th>
<td xml:space="preserve">Janus Web debugging message flags [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[JESID parameter|JESID]]</var></th>
<td xml:space="preserve">JES job id</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[JOBNM parameter|JOBNM]]</var></th>
<td xml:space="preserve">Job name</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[JOBSTEP parameter|JOBSTEP]]</var></th>
<td xml:space="preserve">Job step name</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[KOMMOPT parameter|KOMMOPT]]</var></th>
<td xml:space="preserve">KOMM options [[#Obsolete parameters|(obs)]]</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[LANGFILE parameter|LANGFILE]]</var></th>
<td xml:space="preserve">Language name for file</td>
<td xml:space="preserve">File manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[LANGUSER parameter|LANGUSER]]</var></th>
<td xml:space="preserve">Language name for thread</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[LAUDIT parameter|LAUDIT]]</var></th>
<td xml:space="preserve">Line audit bits</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[LAUDPROC parameter|LAUDPROC]]</var></th>
<td xml:space="preserve">Length of audit procedure names</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[LCPDLST parameter|LCPDLST]]</var></th>
<td xml:space="preserve">Length of C push-down list</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[LDKBMW parameter|LDKBMW]]</var></th>
<td xml:space="preserve"># of pages in DKBM stat window</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[LDKBMWND parameter|LDKBMWND]]</var></th>
<td xml:space="preserve"># of pages in DKBM LRU window</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[LDKBMWNG parameter|LDKBMWNG]]</var></th>
<td xml:space="preserve"># of pages in above-the-bar DKBM LRU window</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[LECHO parameter|LECHO]]</var></th>
<td xml:space="preserve">Line echo</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[LEECHO parameter|LEECHO]]</var></th>
<td xml:space="preserve">Line edit echo</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[LENQTBL parameter|LENQTBL]]</var></th>
<td xml:space="preserve"># of resource locking table entries per user</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[LFSCB parameter|LFSCB]]</var></th>
<td xml:space="preserve">Length of full screen buffer</td>
<td xml:space="preserve">User n parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[LFTBL parameter|LFTBL]]</var></th>
<td xml:space="preserve">Length of FTBL</td>
<td xml:space="preserve">User n parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[LGTBL parameter|LGTBL]]</var></th>
<td xml:space="preserve">Length of global variable table</td>
<td xml:space="preserve">User n parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[LHEAP parameter|LHEAP]]</var></th>
<td xml:space="preserve">Length of heap</td>
<td xml:space="preserve">User n parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[LIBUFF parameter|LIBUFF]]</var></th>
<td xml:space="preserve">Length of input buffer</td>
<td xml:space="preserve">User n parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[LINEND parameter|LINEND]]</var></th>
<td xml:space="preserve">Logical line end symbol</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[LITBL parameter|LITBL]]</var></th>
<td xml:space="preserve">Length of ITBL</td>
<td xml:space="preserve">User n parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[LNTBL parameter|LNTBL]]</var></th>
<td xml:space="preserve">Length of NTBL</td>
<td xml:space="preserve">User n parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[LOBUFF parameter|LOBUFF]]</var></th>
<td xml:space="preserve">Length of output buffer</td>
<td xml:space="preserve">User n parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[LOCATION parameter|LOCATION]]</var></th>
<td xml:space="preserve">D204 location</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[LOGADD parameter|LOGADD]]</var></th>
<td xml:space="preserve">Room for password additions</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[LOGFAIL parameter|LOGFAIL]]</var></th>
<td xml:space="preserve">Action to be taken if logtry exceeded</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[LOGONENQ parameter|LOGONENQ]]</var></th>
<td xml:space="preserve">Userid logon enqueue</td>
<td xml:space="preserve">User n parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[LOGTRY parameter|LOGTRY]]</var></th>
<td xml:space="preserve">Maximum number of login attempts allowed per thread</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[LOUTPB parameter|LOUTPB]]</var></th>
<td xml:space="preserve">Length of output page buffer</td>
<td xml:space="preserve">User n parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[LPDLST parameter|LPDLST]]</var></th>
<td xml:space="preserve">Length of user push down list</td>
<td xml:space="preserve">User n parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[LPFORCE parameter|LPFORCE]]</var></th>
<td xml:space="preserve">Force procedure audit</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[LQTBL parameter|LQTBL]]</var></th>
<td xml:space="preserve">Length of QTBL</td>
<td xml:space="preserve">User n parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[LRECLTBL parameter|LRECLTBL]]</var></th>
<td xml:space="preserve">Length of record locking table (deprecated - use LRETBL)</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[LRESLTBL parameter|LRESLTBL]]</var></th>
<td xml:space="preserve"># of resource locking table entries per user (deprecated - use LENQTBL)</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[LRETBL parameter|LRETBL]]</var></th>
<td xml:space="preserve">Length of record locking table</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[LRUPG parameter|LRUPG]]</var></th>
<td xml:space="preserve">LRU pages remembered</td>
<td xml:space="preserve">EXEC PARM field</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[LRUTIM parameter|LRUTIM]]</var></th>
<td xml:space="preserve">Time to flush obsolete LRU references</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[LSECHO parameter|LSECHO]]</var></th>
<td xml:space="preserve">Line substitution echo</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[LSERVER parameter|LSERVER]]</var></th>
<td xml:space="preserve">BTB server size requirement</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[LSERVERN parameter|LSERVERN]]</var></th>
<td xml:space="preserve">NSA server size requirement</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[LSERVERG parameter|LSERVERG]]</var></th>
<td xml:space="preserve">ATB server size requirement</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[LSERVPD parameter|LSERVPD]]</var></th>
<td xml:space="preserve">Length of scheduler pdl [[#Obsolete parameters|(obs)]]</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[LSTBL parameter|LSTBL]]</var></th>
<td xml:space="preserve">Length of STBL</td>
<td xml:space="preserve">User n parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[LSTRLOB parameter|LSTRLOB]]</var></th>
<td xml:space="preserve">Treat LOBs as Longstrings [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[LTTBL parameter|LTTBL]]</var></th>
<td xml:space="preserve">Length of TTBL</td>
<td xml:space="preserve">User n parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[LVLTRC parameter|LVLTRC]]</var></th>
<td xml:space="preserve">End of input stream message</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[LVTBL parameter|LVTBL]]</var></th>
<td xml:space="preserve">Length of VTBL</td>
<td xml:space="preserve">User n parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[LXTBL parameter|LXTBL]]</var></th>
<td xml:space="preserve">Length of XTBL</td>
<td xml:space="preserve">User n parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[MARKSAN parameter|MARKSAN]]</var></th>
<td xml:space="preserve">Maximum items in a MarksArray [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[MAXAUSER parameter|MAXAUSER]]</var></th>
<td xml:space="preserve">Maximum active interactive users [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[MAXAUSEW parameter|MAXAUSEW]]</var></th>
<td xml:space="preserve">Minimum seconds between MAXAUSER warnings [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[MAXBG parameter|MAXBG]]</var></th>
<td xml:space="preserve">Maximum background/independent Daemons [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[MAXBUF parameter|MAXBUF]]</var></th>
<td xml:space="preserve">Maximum number of buffers</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[MAXDAEM parameter|MAXDAEM]]</var></th>
<td xml:space="preserve">Maximum Daemon objects per user [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[MAXHDR parameter|MAXHDR]]</var></th>
<td xml:space="preserve">Max number of headers</td>
<td xml:space="preserve">User n parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[MAXINCBP parameter|MAXINCBP]]</var></th>
<td xml:space="preserve">Maximum dynamic table B size pct increase</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[MAXINCL parameter|MAXINCL]]</var></th>
<td xml:space="preserve">Max Include level</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[MAXOBUF parameter|MAXOBUF]]</var></th>
<td xml:space="preserve">Maximum open buffers per user</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[MAXOND parameter|MAXOND]]</var></th>
<td xml:space="preserve">Maximum ON unit recursion depth</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[MAXRDS parameter|MAXRDS]]</var></th>
<td xml:space="preserve">Maximum RSA subtasks [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[MAXREP31 parameter|MAXREP31]]</var></th>
<td xml:space="preserve">Maximum 31-bit storage for report writers (megabytes) [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[MAXREP64 parameter|MAXREP64]]</var></th>
<td xml:space="preserve">Maximum 64-bit storage for report writers (megabytes) [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[MAXSIMIO parameter|MAXSIMIO]]</var></th>
<td xml:space="preserve">Max simultaneous disk I/Os</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[MAXSPINS parameter|MAXSPINS]]</var></th>
<td xml:space="preserve">Max number of spins for mplock</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[MAXTIME parameter|MAXTIME]]</var></th>
<td xml:space="preserve">Maximum run time</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[MAXTRL parameter|MAXTRL]]</var></th>
<td xml:space="preserve">Max number of trailers</td>
<td xml:space="preserve">User n parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[MAXUD parameter|MAXUD]]</var></th>
<td xml:space="preserve">Long update unit durations (ms)</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[MBSCAN parameter|MBSCAN]]</var></th>
<td xml:space="preserve">Max table B records scan</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[MCNCT parameter|MCNCT]]</var></th>
<td xml:space="preserve">Max connect time</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[MCPU parameter|MCPU]]</var></th>
<td xml:space="preserve">Max CPU time</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[MDKRD parameter|MDKRD]]</var></th>
<td xml:space="preserve">Max disk reads</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[MDKWR parameter|MDKWR]]</var></th>
<td xml:space="preserve">Max disk writes</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[MINBUF parameter|MINBUF]]</var></th>
<td xml:space="preserve">Minimum number of buffers</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[MISCOPT parameter|MISCOPT]]</var></th>
<td xml:space="preserve">Miscellaneous system options [[#Obsolete parameters|(obs)]]</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[MODEL parameter|MODEL]]</var></th>
<td xml:space="preserve">Terminal model</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[MODPROT parameter|MODPROT]]</var></th>
<td xml:space="preserve">204 load module protection flags [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[MODTIM parameter|MODTIM]]</var></th>
<td xml:space="preserve">Julian date-time of Model 204 module</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[MONPARM parameter|MONPARM]]</var></th>
<td xml:space="preserve">SirMon system flags [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[MOUT parameter|MOUT]]</var></th>
<td xml:space="preserve">Max output lines</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[MPOPTS parameter|MPOPTS]]</var></th>
<td xml:space="preserve">MP user language options</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[MPSYS parameter|MPSYS]]</var></th>
<td xml:space="preserve">MP/204 system flags</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[MQBUFSZ parameter|MQBUFSZ]]</var></th>
<td xml:space="preserve">Initial universal buffer size</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[MQDEQMAN parameter|MQDEQMAN]]</var></th>
<td xml:space="preserve">MQ/204 default queue manager</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[MQINTASK parameter|MQINTASK]]</var></th>
<td xml:space="preserve">Initial MQ/204 subtasks</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[MQMXTASK parameter|MQMXTASK]]</var></th>
<td xml:space="preserve">Maximum MQ/204 subtasks</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[MQSUBREL parameter|MQSUBREL]]</var></th>
<td xml:space="preserve">Release MQ subtask (1-release, 0 - retain)</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[MQWAIT parameter|MQWAIT]]</var></th>
<td xml:space="preserve">Maximum wait for MQ/204 subtask</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[MSGCTL parameter|MSGCTL]]</var></th>
<td xml:space="preserve">Message printing options</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[MSRES parameter|MSRES]]</var></th>
<td xml:space="preserve">Maximum SREs per file in RETBL</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[MSTRADD parameter|MSTRADD]]</var></th>
<td xml:space="preserve">Records added to master areas</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[MSTRDEL parameter|MSTRDEL]]</var></th>
<td xml:space="preserve">Records deleted from master areas</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[MUDD parameter|MUDD]]</var></th>
<td xml:space="preserve">Max UDD lines</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[MVFPG parameter|MVFPG]]</var></th>
<td xml:space="preserve">Table A many valued field pages</td>
<td xml:space="preserve">CREATE command</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[MXIJLOG parameter|MXIJLOG]]</var></th>
<td xml:space="preserve">Number of 4k pages for JLOG statistics</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[NBKPG parameter|NBKPG]]</var></th>
<td xml:space="preserve">Number of backpages kept</td>
<td xml:space="preserve">User n parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[NCMPBUF parameter|NCMPBUF]]</var></th>
<td xml:space="preserve">Number of compression buffers [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[NDCBS parameter|NDCBS]]</var></th>
<td xml:space="preserve">Number of file DCBs</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[NDIR parameter|NDIR]]</var></th>
<td xml:space="preserve">Number of file directory entries</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[NECBS parameter|NECBS]]</var></th>
<td xml:space="preserve">Number of ECBs</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[NFILES parameter|NFILES]]</var></th>
<td xml:space="preserve">Number of file areas</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[NGROUP parameter|NGROUP]]</var></th>
<td xml:space="preserve">Max # of open groups</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[NJBUFF parameter|NJBUFF]]</var></th>
<td xml:space="preserve">Number of journal buffers</td>
<td xml:space="preserve">EXEC PARM field</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[NLBUFF parameter|NLBUFF]]</var></th>
<td xml:space="preserve">Number of CCAJLOG buffers</td>
<td xml:space="preserve">EXEC PARM field</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[NLRUQ parameter|NLRUQ]]</var></th>
<td xml:space="preserve"># of DKBM LRU queues</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[NLRUQG parameter|NLRUQG]]</var></th>
<td xml:space="preserve"># of above-the-bar DKBM LRU queues</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[NMPSUBS parameter|NMPSUBS]]</var></th>
<td xml:space="preserve">Number of offload subtasks</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[NMPSUBZ parameter|NMPSUBZ]]</var></th>
<td xml:space="preserve">Number of zIIP eligible subtasks</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[NOECBS parameter|NOECBS]]</var></th>
<td xml:space="preserve">Number of ECBs</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[NORQS parameter|NORQS]]</var></th>
<td xml:space="preserve">Number of requests preserved</td>
<td xml:space="preserve">User n parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[NOTERM parameter|NOTERM]]</var></th>
<td xml:space="preserve">Number of terminals on line</td>
<td xml:space="preserve">User n parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[NOTHREAD parameter|NOTHREAD]]</var></th>
<td xml:space="preserve">Number of inbound threads</td>
<td xml:space="preserve">User n parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[NOUTBUF parameter|NOUTBUF]]</var></th>
<td xml:space="preserve"># of full screen output buffers</td>
<td xml:space="preserve">User n parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[NRMTFILE parameter|NRMTFILE]]</var></th>
<td xml:space="preserve">Number of remote file areas</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[NRMTLOCS parameter|NRMTLOCS]]</var></th>
<td xml:space="preserve">Number of remote locations</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[NSERVS parameter|NSERVS]]</var></th>
<td xml:space="preserve">Number of servers</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[NSUBTKS parameter|NSUBTKS]]</var></th>
<td xml:space="preserve">Max number of pseudo-subtasks</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[NUMBUF parameter|NUMBUF]]</var></th>
<td xml:space="preserve">Number of buffers</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[NUMBUFG parameter|NUMBUFG]]</var></th>
<td xml:space="preserve">Number of above-the-bar buffers</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[NUSERS parameter|NUSERS]]</var></th>
<td xml:space="preserve">Number of users</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[OBJSTAT parameter|OBJSTAT]]</var></th>
<td xml:space="preserve">Sirius object statistic flags [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[OBJSTMIN parameter|OBJSTMIN]]</var></th>
<td xml:space="preserve">Sirius object statistic minimum [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[OIDEPTH parameter|OIDEPTH]]</var></th>
<td xml:space="preserve">No. levels of ordered index nodes</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[OILEAVES parameter|OILEAVES]]</var></th>
<td xml:space="preserve">No. ordered index nodes: leaves</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[OILPACT parameter|OILPACT]]</var></th>
<td xml:space="preserve">Ordered index list page active</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[OINBYTES parameter|OINBYTES]]</var></th>
<td xml:space="preserve">No. ordered index bytes</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[OINENTRY parameter|OINENTRY]]</var></th>
<td xml:space="preserve">No. ordered index entries</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[OINODES parameter|OINODES]]</var></th>
<td xml:space="preserve">No. ordered index nodes: all levels</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[OPENCTL parameter|OPENCTL]]</var></th>
<td xml:space="preserve">Open control flags</td>
<td xml:space="preserve">File manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[OPSYS parameter|OPSYS]]</var></th>
<td xml:space="preserve">Operating system</td>
<td xml:space="preserve">EXEC PARM field</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[OUTCCC parameter|OUTCCC]]</var></th>
<td xml:space="preserve">Output cont char column</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[OUTLPP parameter|OUTLPP]]</var></th>
<td xml:space="preserve">Output lines per page</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[OUTMRL parameter|OUTMRL]]</var></th>
<td xml:space="preserve">Max output record length</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[OUTPNO parameter|OUTPNO]]</var></th>
<td xml:space="preserve">Output page number</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[OUTPUT parameter|OUTPUT]]</var></th>
<td xml:space="preserve">Output device name</td>
<td xml:space="preserve">User n parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[OVFLADD parameter|OVFLADD]]</var></th>
<td xml:space="preserve">Records added to overflow areas</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[OVFLDEL parameter|OVFLDEL]]</var></th>
<td xml:space="preserve">Records deleted from overflow areas</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[PAGE parameter|PAGE]]</var></th>
<td xml:space="preserve">Backpage command character</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[PAGEFIX parameter|PAGEFIX]]</var></th>
<td xml:space="preserve">Page-fix parameter string</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[PAGESZ parameter|PAGESZ]]</var></th>
<td xml:space="preserve">File page size</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[PDSIZE parameter|PDSIZE]]</var></th>
<td xml:space="preserve">Pages per procedure dictionary section</td>
<td xml:space="preserve">CREATE command</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[PDSTRPPG parameter|PDSTRPPG]]</var></th>
<td xml:space="preserve">Names/procedure dictionary page limit</td>
<td xml:space="preserve">CREATE command</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[PERFOPT parameter|PERFOPT]]</var></th>
<td xml:space="preserve">Sirius Performance Enhancement flags [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[PERFOPT2 parameter|PERFOPT2]]</var></th>
<td xml:space="preserve">Sirius Performance Enhancement flags V2 [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[PGSEP parameter|PGSEP]]</var></th>
<td xml:space="preserve">Lines between pages</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[POLLNO parameter|POLLNO]]</var></th>
<td xml:space="preserve">Relative polling number</td>
<td xml:space="preserve">User n parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[PQOOPT parameter|PQOOPT]]</var></th>
<td xml:space="preserve">Parallel query options</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[PQOSYS parameter|PQOSYS]]</var></th>
<td xml:space="preserve">Parallel query system options</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[PRCLDEF parameter|PRCLDEF]]</var></th>
<td xml:space="preserve">Default user class for procedures</td>
<td xml:space="preserve">File manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[PRIOMAX parameter|PRIOMAX]]</var></th>
<td xml:space="preserve">Max age priority</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[PRIORITY parameter|PRIORITY]]</var></th>
<td xml:space="preserve">User priority</td>
<td xml:space="preserve">User n parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[PRIVDEF parameter|PRIVDEF]]</var></th>
<td xml:space="preserve">Default file privileges</td>
<td xml:space="preserve">File manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[PROMPT parameter|PROMPT]]</var></th>
<td xml:space="preserve">Prompt control</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[PUPDTH parameter|PUPDTH]]</var></th>
<td xml:space="preserve">Procedure update hash value [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[PWDEXP parameter|PWDEXP]]</var></th>
<td xml:space="preserve">Password expiration days</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[PWDPURGE parameter|PWDPURGE]]</var></th>
<td xml:space="preserve">Password purge days</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[PWDWARN parameter|PWDWARN]]</var></th>
<td xml:space="preserve">Password warning days</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[RCVOPT parameter|RCVOPT]]</var></th>
<td xml:space="preserve">Recovery options</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[READLVL parameter|READLVL]]</var></th>
<td xml:space="preserve">Default read FLS level</td>
<td xml:space="preserve">File manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[RECLOCKO parameter|RECLOCKO]]</var></th>
<td xml:space="preserve">Record locking options [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[RECRDOPT parameter|RECRDOPT]]</var></th>
<td xml:space="preserve">Record options</td>
<td xml:space="preserve">CREATE command</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[RECSCTY parameter|RECSCTY]]</var></th>
<td xml:space="preserve">Name of file's record security field</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[RECSECID parameter|RECSECID]]</var></th>
<td xml:space="preserve">Record security id</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[RESCURR parameter|RESCURR]]</var></th>
<td xml:space="preserve">Current storage used for resident requests</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[RESHIGH parameter|RESHIGH]]</var></th>
<td xml:space="preserve">HWM for storage used for resident requests</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[RESLTHR parameter|RESLTHR]]</var></th>
<td xml:space="preserve">APSY load threshold for making request resident</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[RESPAGE parameter|RESPAGE]]</var></th>
<td xml:space="preserve">Number of resident N/QTBL ATB pages</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[RESSIZE parameter|RESSIZE]]</var></th>
<td xml:space="preserve">Maximum storage to be used for resident requests</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[RESTARTU parameter|RESTARTU]]</var></th>
<td xml:space="preserve">Restart utility flags [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">EXEC PARM field</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[RESTHRSH parameter|RESTHRSH]]</var></th>
<td xml:space="preserve">Server write threshold for making request resident</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[RETRVBUF parameter|RETRVBUF]]</var></th>
<td xml:space="preserve">Size of retrieve key buffer [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[RETRVKEY parameter|RETRVKEY]]</var></th>
<td xml:space="preserve">Retrieve PF key</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[RETRVOPT parameter|RETRVOPT]]</var></th>
<td xml:space="preserve">Retrieve key options [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[RPTCNT parameter|RPTCNT]]</var></th>
<td xml:space="preserve">Samples between performance stat lines</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SCANPARM parameter|SCANPARM]]</var></th>
<td xml:space="preserve">SirScan system flags [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SCANTIME parameter|SCANTIME]]</var></th>
<td xml:space="preserve">Maximum seconds between SirScan info messages [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SCHDOFL parameter|SCHDOFL]]</var></th>
<td xml:space="preserve">Threshold for activating subtasks</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SCHDOFLZ parameter|SCHDOFLZ]]</var></th>
<td xml:space="preserve">Threshold for activating zIIP subtasks</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SCHDOPT parameter|SCHDOPT]]</var></th>
<td xml:space="preserve">Scheduler options</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SCHDOPT1 parameter|SCHDOPT1]]</var></th>
<td xml:space="preserve">Scheduler options</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SCRNSTBL parameter|SCRNSTBL]]</var></th>
<td xml:space="preserve">STBL size for Screen objects [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SDAEMDEL parameter|SDAEMDEL]]</var></th>
<td xml:space="preserve">SDaemon swap delay (MS) [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SDAEMDEV parameter|SDAEMDEV]]</var></th>
<td xml:space="preserve">IODEV number for SDaemons [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SDEBGUIP parameter|SDEBGUIP]]</var></th>
<td xml:space="preserve">Sirius debug default GUI port number [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SDEBWRKP parameter|SDEBWRKP]]</var></th>
<td xml:space="preserve">Sirius debug default worker port number [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SDMOPT parameter|SDMOPT]]</var></th>
<td xml:space="preserve">SDaemon options [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SECPLIST parameter|SECPLIST]]</var></th>
<td xml:space="preserve">Security parameter-list name for default user</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SECTRLOG parameter|SECTRLOG]]</var></th>
<td xml:space="preserve">Security trusted login environment</td>
<td xml:space="preserve">User n parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SECTY parameter|SECTY]]</var></th>
<td xml:space="preserve">Low-level security in effect</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SELLVL parameter|SELLVL]]</var></th>
<td xml:space="preserve">Default select FLS level</td>
<td xml:space="preserve">File manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SEQOPT parameter|SEQOPT]]</var></th>
<td xml:space="preserve">Sequential processing options</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SEQPDL parameter|SEQPDL]]</var></th>
<td xml:space="preserve">Minimum PDL available for sequencer</td>
<td xml:space="preserve">User n parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SERVACTV parameter|SERVACTV]]</var></th>
<td xml:space="preserve">Current size of this server</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SERVGA parameter|SERVGA]]</var></th>
<td xml:space="preserve">Above the bar server areas</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SERVGSZ parameter|SERVGSZ]]</var></th>
<td xml:space="preserve">Above the bar server size</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SERVNSA parameter|SERVNSA]]</var></th>
<td xml:space="preserve">Non swappable server areas</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SERVNSSZ parameter|SERVNSSZ]]</var></th>
<td xml:space="preserve">Non swappable server area size</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SERVSIZE parameter|SERVSIZE]]</var></th>
<td xml:space="preserve">Maximum size of this server</td>
<td xml:space="preserve">User n parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SESDEBUG parameter|SESDEBUG]]</var></th>
<td xml:space="preserve">Session debugging flags [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SESDEFOW parameter|SESDEFOW]]</var></th>
<td xml:space="preserve">Default open wait time in seconds [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SESDEFTO parameter|SESDEFTO]]</var></th>
<td xml:space="preserve">Default session timeout seconds [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SESMAXTO parameter|SESMAXTO]]</var></th>
<td xml:space="preserve">Maximum session timeout in seconds [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SESNPRV parameter|SESNPRV]]</var></th>
<td xml:space="preserve">Maximum number of private sessions [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SESNPUB parameter|SESNPUB]]</var></th>
<td xml:space="preserve">Maximum number of public sessions [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SESOPT parameter|SESOPT]]</var></th>
<td xml:space="preserve">Session options [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SESUMAX parameter|SESUMAX]]</var></th>
<td xml:space="preserve">Maximum private sessions per user [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SIOSLICE parameter|SIOSLICE]]</var></th>
<td xml:space="preserve">Server slice - IO</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SIRAPSYF parameter|SIRAPSYF]]</var></th>
<td xml:space="preserve">Sirius APSY flags [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SIRCOMP parameter|SIRCOMP]]</var></th>
<td xml:space="preserve">Sirius compilation flags [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SIREDIT parameter|SIREDIT]]</var></th>
<td xml:space="preserve">Sirius EDIT flags [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SIRFACT parameter|SIRFACT]]</var></th>
<td xml:space="preserve">SirFact flags [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SIRFUNC parameter|SIRFUNC]]</var></th>
<td xml:space="preserve">Function table options [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">EXEC PARM field</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SIRMSG parameter|SIRMSG]]</var></th>
<td xml:space="preserve">Upper casing of msgs/parm descriptions (deprecated - use UPCASMSG) [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SIRPDLHW parameter|SIRPDLHW]]</var></th>
<td xml:space="preserve">Accurate PDL HWM calculation [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SIRPRMPT parameter|SIRPRMPT]]</var></th>
<td xml:space="preserve">Sirius full screen prompt [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SIRTERM parameter|SIRTERM]]</var></th>
<td xml:space="preserve">Sirius terminal options [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SIRTUNE parameter|SIRTUNE]]</var></th>
<td xml:space="preserve">SirTune flags [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">EXEC PARM field</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SLICEMAX parameter|SLICEMAX]]</var></th>
<td xml:space="preserve">Max age slice</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SMFLORN parameter|SMFLORN]]</var></th>
<td xml:space="preserve">SMF logout rec #</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SMFSLRN parameter|SMFSLRN]]</var></th>
<td xml:space="preserve">SMF "since last" rec #</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SMFSVC parameter|SMFSVC]]</var></th>
<td xml:space="preserve">SMF SVC # [[#Obsolete parameters|(obs)]]</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SMPLTIM parameter|SMPLTIM]]</var></th>
<td xml:space="preserve">Performance sample time</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SMTPCADD parameter|SMTPCADD]]</var></th>
<td xml:space="preserve">Default SMTP client address</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SMTPCPRT parameter|SMTPCPRT]]</var></th>
<td xml:space="preserve">Default SMTP client port</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SMTPSADD parameter|SMTPSADD]]</var></th>
<td xml:space="preserve">Default SMTP server address</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SMTPSPRT parameter|SMTPSPRT]]</var></th>
<td xml:space="preserve">Default SMTP server port</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SNAPCLS parameter|SNAPCLS]]</var></th>
<td xml:space="preserve">Class for spun-off snaps</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SNAPCTL parameter|SNAPCTL]]</var></th>
<td xml:space="preserve">Snap/dump options</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SNAPDST parameter|SNAPDST]]</var></th>
<td xml:space="preserve">Destination for spun-off snaps</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SNAPFAIL parameter|SNAPFAIL]]</var></th>
<td xml:space="preserve">Number of CCASNAP failures</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SNAPFLIM parameter|SNAPFLIM]]</var></th>
<td xml:space="preserve">0 or max snap failures allowed</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SNAPID parameter|SNAPID]]</var></th>
<td xml:space="preserve">Number of snaps so far</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SNAPLIM parameter|SNAPLIM]]</var></th>
<td xml:space="preserve">0 or max number of snaps allowed</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SNAPLIMD parameter|SNAPLIMD]]</var></th>
<td xml:space="preserve">0 or max number of occurrences of any particular snap [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SNAPPDLX parameter|SNAPPDLX]]</var></th>
<td xml:space="preserve">Snap pdl extension option</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SOCKMAX parameter|SOCKMAX]]</var></th>
<td xml:space="preserve">Maximum sockets per user [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SORTKEY parameter|SORTKEY]]</var></th>
<td xml:space="preserve">Name of file's sort key field</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SPANSIZE parameter|SPANSIZE]]</var></th>
<td xml:space="preserve">SPANSIZE for date $functions [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SPCORE parameter|SPCORE]]</var></th>
<td xml:space="preserve">Spare core reserved</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SPILLADD parameter|SPILLADD]]</var></th>
<td xml:space="preserve">Spill indicator - adds</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SPILLDEL parameter|SPILLDEL]]</var></th>
<td xml:space="preserve">Spill indicator - deletes</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SQLBSCAN parameter|SQLBSCAN]]</var></th>
<td xml:space="preserve">Max RSQL read/writes</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SQLBUFSZ parameter|SQLBUFSZ]]</var></th>
<td xml:space="preserve">Remote SQL server buffer size</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SQLCNVER parameter|SQLCNVER]]</var></th>
<td xml:space="preserve">SQL fetch option</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SQLFILE parameter|SQLFILE]]</var></th>
<td xml:space="preserve">SQL generated file names</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SQLIQBSZ parameter|SQLIQBSZ]]</var></th>
<td xml:space="preserve">SQL intrnl query buff size</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SQLLPLIM parameter|SQLLPLIM]]</var></th>
<td xml:space="preserve">SQL read/writes per slice</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SRSDEFTO parameter|SRSDEFTO]]</var></th>
<td xml:space="preserve">Default saved record set timeout [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SRSMAX parameter|SRSMAX]]</var></th>
<td xml:space="preserve">Maximum number of saved record sets [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SRSMAXTO parameter|SRSMAXTO]]</var></th>
<td xml:space="preserve">Maximum saved record set timeout [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SRSMAXUS parameter|SRSMAXUS]]</var></th>
<td xml:space="preserve">Maximum saved record sets per user [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SRSPARM parameter|SRSPARM]]</var></th>
<td xml:space="preserve">Saved record set parameters [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SRVSLICE parameter|SRVSLICE]]</var></th>
<td xml:space="preserve">Server slice - CPU</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[STEPNM parameter|STEPNM]]</var></th>
<td xml:space="preserve">Step name</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[STORCUR parameter|STORCUR]]</var></th>
<td xml:space="preserve">Current dynamic storage allocation</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[STORCURG parameter|STORCURG]]</var></th>
<td xml:space="preserve">Current mbytes ATB storage allocated</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[STORINIT parameter|STORINIT]]</var></th>
<td xml:space="preserve">Storage acquired during initialization</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[STORMAX parameter|STORMAX]]</var></th>
<td xml:space="preserve">Dynamic storage high water mark</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[STORMAXG parameter|STORMAXG]]</var></th>
<td xml:space="preserve">HWM mbytes ATB storage allocated</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[STORMXZP parameter|STORMXZP]]</var></th>
<td xml:space="preserve">HWM mbytes storage allocated with 1 MB pages</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[STORZPAG parameter|STORZPAG]]</var></th>
<td xml:space="preserve">Current mbytes storage allocated with 1 MB pages</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SUB parameter|SUB]]</var></th>
<td xml:space="preserve">Substitution control</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SVIOMAXT parameter|SVIOMAXT]]</var></th>
<td xml:space="preserve">Server tracks per user</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SYSDATE parameter|SYSDATE]]</var></th>
<td xml:space="preserve">System initial date</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SYSDINFO parameter|SYSDINFO]]</var></th>
<td xml:space="preserve">System date message</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SYSID parameter|SYSID]]</var></th>
<td xml:space="preserve">SMF system identification</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SYSOPT parameter|SYSOPT]]</var></th>
<td xml:space="preserve">System options</td>
<td xml:space="preserve">EXEC PARM field</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SYSOPT2 parameter|SYSOPT2]]</var></th>
<td xml:space="preserve">System options</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SYSTIME parameter|SYSTIME]]</var></th>
<td xml:space="preserve">System initial time</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[TABSP parameter|TABSP]]</var></th>
<td xml:space="preserve">Tab spacing</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[TCPNAME parameter|TCPNAME]]</var></th>
<td xml:space="preserve">TCP/IP service machine name</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[TCPOPTS parameter|TCPOPTS]]</var></th>
<td xml:space="preserve">TCP options</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[TCPSERV parameter|TCPSERV]]</var></th>
<td xml:space="preserve">Name of TCP/IP server address space [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[TCPSUBSY parameter|TCPSUBSY]]</var></th>
<td xml:space="preserve">Subsystem name for TCP/IP server [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[TCPTYPE parameter|TCPTYPE]]</var></th>
<td xml:space="preserve">Type of TCP/IP server address space [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[TEMPBOP parameter|TEMPBOP]]</var></th>
<td xml:space="preserve">Number of CCATEMP pages reserved for backout data</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[TEMPCUR parameter|TEMPCUR]]</var></th>
<td xml:space="preserve">CCATEMP pages currently in use</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[TEMPCURE parameter|TEMPCURE]]</var></th>
<td xml:space="preserve">CCATEMP pages currently in use (expansion area)</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[TEMPCURS parameter|TEMPCURS]]</var></th>
<td xml:space="preserve">CCATEMP pages currently in use (small model page pool)</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[TEMPHIE parameter|TEMPHIE]]</var></th>
<td xml:space="preserve">CCATEMP HWM pages used (expansion area)</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[TEMPHIS parameter|TEMPHIS]]</var></th>
<td xml:space="preserve">CCATEMP HWM pages used (small model page pool)</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[TEMPMAX parameter|TEMPMAX]]</var></th>
<td xml:space="preserve">CCATEMP highest number of pages used</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[TEMPPAGE parameter|TEMPPAGE]]</var></th>
<td xml:space="preserve">Number of CCATEMP pages in storage</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[TEMPSIZE parameter|TEMPSIZE]]</var></th>
<td xml:space="preserve">CCATEMP size in pages</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[TERMBUF parameter|TERMBUF]]</var></th>
<td xml:space="preserve"># of full screen input buffers</td>
<td xml:space="preserve">User n parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[TERMID parameter|TERMID]]</var></th>
<td xml:space="preserve">Terminal id</td>
<td xml:space="preserve">User n parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[TERMOPT parameter|TERMOPT]]</var></th>
<td xml:space="preserve">Terminal options</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[TIMELEF parameter|TIMELEF]]</var></th>
<td xml:space="preserve">Time left before end of run</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[TIMEOUT parameter|TIMEOUT]]</var></th>
<td xml:space="preserve">Inactive thread timeout in seconds</td>
<td xml:space="preserve">User n parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[TIMESTOP parameter|TIMESTOP]]</var></th>
<td xml:space="preserve">Time allowed for termination</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[TIMESVC parameter|TIMESVC]]</var></th>
<td xml:space="preserve">CCA timing SVC #</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[TNDEV parameter|TNDEV]]</var></th>
<td xml:space="preserve">IODEV number for TNSERV threads [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[UBUFSZ parameter|UBUFSZ]]</var></th>
<td xml:space="preserve">Initial universal buffer size</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[UCPUSLIC parameter|UCPUSLIC]]</var></th>
<td xml:space="preserve">User CPU slice</td>
<td xml:space="preserve">User n parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[UDDCCC parameter|UDDCCC]]</var></th>
<td xml:space="preserve">USE DDNAME - cont char column</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[UDDLPP parameter|UDDLPP]]</var></th>
<td xml:space="preserve">USE DDNAME - lines per page</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[UDDRFM parameter|UDDRFM]]</var></th>
<td xml:space="preserve">USE DDNAME - record format</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[UFEOHASH parameter|UFEOHASH]]</var></th>
<td xml:space="preserve">Unlocked FEO hash table size</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[UFEOMISS parameter|UFEOMISS]]</var></th>
<td xml:space="preserve">Number of unlocked FEO misses</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[UIOSLIC parameter|UIOSLIC]]</var></th>
<td xml:space="preserve">User I/O slice</td>
<td xml:space="preserve">User n parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[ULTRACE parameter|ULTRACE]]</var></th>
<td xml:space="preserve">UL Trace statement flags [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[ULTRACEP parameter|ULTRACEP]]</var></th>
<td xml:space="preserve">Max UL Trace statement pages [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[UPCASMSG parameter|UPCASMSG]]</var></th>
<td xml:space="preserve">Upper casing of msgs/parm descriptions</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[UPDTID parameter|UPDTID]]</var></th>
<td xml:space="preserve">User current update id</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[UPDTLVL parameter|UPDTLVL]]</var></th>
<td xml:space="preserve">Default update FLS level</td>
<td xml:space="preserve">File manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[UPRIV parameter|UPRIV]]</var></th>
<td xml:space="preserve">User privilege bits</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[USERID parameter|USERID]]</var></th>
<td xml:space="preserve">User id</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[USLCMAX parameter|USLCMAX]]</var></th>
<td xml:space="preserve">User slice max to CSLICE</td>
<td xml:space="preserve">User n parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[USLCWAIT parameter|USLCWAIT]]</var></th>
<td xml:space="preserve">User slice wait time</td>
<td xml:space="preserve">User n parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[VDP parameter|VDP]]</var></th>
<td xml:space="preserve">Default %var decimal places</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[VERIFY parameter|VERIFY]]</var></th>
<td xml:space="preserve">Write verify</td>
<td xml:space="preserve">File manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[VERSION parameter|VERSION]]</var></th>
<td xml:space="preserve">Release of Model 204</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[VLEN parameter|VLEN]]</var></th>
<td xml:space="preserve">Default %var length</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[VMFSCHNL parameter|VMFSCHNL]]</var></th>
<td xml:space="preserve">VMCF display mode channel name</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[VMIFCHNL parameter|VMIFCHNL]]</var></th>
<td xml:space="preserve">VMCF IFAM channel name</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[VMIOCHNL parameter|VMIOCHNL]]</var></th>
<td xml:space="preserve">VMCF line mode channel name</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[VTAMNAME parameter|VTAMNAME]]</var></th>
<td xml:space="preserve">VTAM application name</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[VTAMNTO parameter|VTAMNTO]]</var></th>
<td xml:space="preserve">VTAM NTO application name</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[VTGCSSRV parameter|VTGCSSRV]]</var></th>
<td xml:space="preserve">GCS service VM for VTAM terminals</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[VTLAPSY parameter|VTLAPSY]]</var></th>
<td xml:space="preserve">Login APSY for VT75 terminals [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[VTYPE parameter|VTYPE]]</var></th>
<td xml:space="preserve">Default %var type</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[WAITSCAN parameter|WAITSCAN]]</var></th>
<td xml:space="preserve">Wait scan interval</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[WAITTIME parameter|WAITTIME]]</var></th>
<td xml:space="preserve">Wait time in seconds for a response</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[WEBAUDIT parameter|WEBAUDIT]]</var></th>
<td xml:space="preserve">Janus Web audit trail reduction flags [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[WEBOPT parameter|WEBOPT]]</var></th>
<td xml:space="preserve">Miscellaneous Janus Web options [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[XAUTOINC parameter|XAUTOINC]]</var></th>
<td xml:space="preserve">Number of pages for table X auto increase</td>
<td xml:space="preserve">File manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[XDMSSN parameter|XDMSSN]]</var></th>
<td xml:space="preserve">XDM subsystem</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[XHIGHPG parameter|XHIGHPG]]</var></th>
<td xml:space="preserve">Table X highest active page</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[XMEMOPT parameter|XMEMOPT]]</var></th>
<td xml:space="preserve">Cross-memory PC options</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[XMEMSVC parameter|XMEMSVC]]</var></th>
<td xml:space="preserve">Cross-memory SVC #</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[XQLEN parameter|XQLEN]]</var></th>
<td xml:space="preserve">Table X queue length</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[XRECPPG parameter|XRECPPG]]</var></th>
<td xml:space="preserve">Table X slots per page</td>
<td xml:space="preserve">CREATE command</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[XRESERVE parameter|XRESERVE]]</var></th>
<td xml:space="preserve">Table X reserve space per page</td>
<td xml:space="preserve">File manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[XREUSE parameter|XREUSE]]</var></th>
<td xml:space="preserve">Free space required to reuse table X page</td>
<td xml:space="preserve">File manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[XREUSED parameter|XREUSED]]</var></th>
<td xml:space="preserve">Extension slots reused in table X</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[XSIZE parameter|XSIZE]]</var></th>
<td xml:space="preserve">Pages in table X</td>
<td xml:space="preserve">CREATE command</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[ZPAGEOPT parameter|ZPAGEOPT]]</var></th>
<td xml:space="preserve">1 mb page areas</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[ZQMAX parameter|ZQMAX]]</var></th>
<td xml:space="preserve">Z queue max length</td>
<td xml:space="preserve">System manager</td>
</tr>
</table>
</div>

Template:LSERVERG parameter subtitle

2015-01-27T21:18:04Z

DVRICKP: Created page with "ATB server size requirement"

ATB server size requirement

Template:LSERVERN parameter subtitle

2015-01-27T21:17:27Z

DVRICKP: Created page with "NSA server size requirement"

NSA server size requirement

LSERVERN parameter

2015-01-27T21:17:04Z

DVRICKP:

{{Template:LSERVERN parameter subtitle}}
==Summary==
<dl>
<dt>Default value
<dd>None
<dt>Parameter type
<dd>Utable
<dt>Where set
<dd>View-only
<dt>Related products
<dd>All
<dt>Introduced
<dd><var class="product">Model 204 V7.6</var>
</dl>

==Description==

The current server size required for the user's tables in the NSA (non-swap-area). 

A table of maximum server sizes appears in [[Defining the runtime environment (CCAIN)#Server areas|Server areas]]. 

[[Category:Utable parameters]]
[[Category:Parameters]]

Template:LSERVER parameter subtitle

2015-01-27T21:15:11Z

DVRICKP:

BTB server size requirement

LSERVERG parameter

2015-01-27T21:12:23Z

DVRICKP: Created page with "{{Template:LSERVERG parameter subtitle}} ==Summary== <dl> <dt>Default value <dd>None <dt>Parameter type <dd>Utable <dt>Where set <dd>View-only <dt>Related products <dd>All <dt..."

{{Template:LSERVERG parameter subtitle}}
==Summary==
<dl>
<dt>Default value
<dd>None
<dt>Parameter type
<dd>Utable
<dt>Where set
<dd>View-only
<dt>Related products
<dd>All
<dt>Introduced
<dd><var class="product">Model 204 V7.6 </var>
</dl>

==Description==

The current server size required for the user's tables in the ATB (above the bar) server. 

A table of maximum server sizes appears in [[Defining the runtime environment (CCAIN)#Server areas|Server areas]]. 

[[Category:Utable parameters]]
[[Category:Parameters]]

LSERVERN parameter

2015-01-27T21:09:32Z

DVRICKP: Created page with "{{Template:LSERVER parameter subtitle}} ==Summary== <dl> <dt>Default value <dd>None <dt>Parameter type <dd>Utable <dt>Where set <dd>View-only <dt>Related products <dd>All <dt>..."

{{Template:LSERVER parameter subtitle}}
==Summary==
<dl>
<dt>Default value
<dd>None
<dt>Parameter type
<dd>Utable
<dt>Where set
<dd>View-only
<dt>Related products
<dd>All
<dt>Introduced
<dd><var class="product">Model 204 V7.6</var>
</dl>

==Description==

The current server size required for the user's tables in the NSA (non-swap-area). 

A table of maximum server sizes appears in [[Defining the runtime environment (CCAIN)#Server areas|Server areas]]. 

[[Category:Utable parameters]]
[[Category:Parameters]]

Template:List of M204 parameters

2015-01-27T21:06:16Z

DVRICKP:

<div class="showVisit">
<table>
<tr class="head">
<th>Parameter name</th>
<th>Description</th>
<th>Set/reset type</th>
</tr>
<tr>
<th xml:space="preserve"><var>[[ACCOUNT parameter|ACCOUNT]]</var></th>
<td xml:space="preserve">Billing account</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[ACCTIM parameter|ACCTIM]]</var></th>
<td xml:space="preserve">Time before partial stat lines</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[ACTRDS parameter|ACTRDS]]</var></th>
<td xml:space="preserve">Active RSA subtasks [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[ADDLVL parameter|ADDLVL]]</var></th>
<td xml:space="preserve">Default add FLS level</td>
<td xml:space="preserve">File manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[AGEINCR parameter|AGEINCR]]</var></th>
<td xml:space="preserve">Aging priority increment</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[AGEINTVL parameter|AGEINTVL]]</var></th>
<td xml:space="preserve">Aging interval</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[AGESCAN parameter|AGESCAN]]</var></th>
<td xml:space="preserve">Age scan interval</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[AGESLICE parameter|AGESLICE]]</var></th>
<td xml:space="preserve">Aging slice increment</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[ALOCPRIV parameter|ALOCPRIV]]</var></th>
<td xml:space="preserve">Allocate privilege requirement</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[ALTIODEV parameter|ALTIODEV]]</var></th>
<td xml:space="preserve">Alternate user zero IODEV</td>
<td xml:space="preserve">EXEC PARM field</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[AMPSUBS parameter|AMPSUBS]]</var></th>
<td xml:space="preserve">Number of active offload subtasks</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[AMPSUBZ parameter|AMPSUBZ]]</var></th>
<td xml:space="preserve">Number of active zIIP eligible subtasks</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[APSYPAGE parameter|APSYPAGE]]</var></th>
<td xml:space="preserve">Number of APSY pages in hiperspace</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[APSYSEC parameter|APSYSEC]]</var></th>
<td xml:space="preserve">Sirius APSY security flags [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[APSYXMM parameter|APSYXMM]]</var></th>
<td xml:space="preserve">Expanded storage megabytes for saved APSY compilations [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[ARETRIES parameter|ARETRIES]]</var></th>
<td xml:space="preserve">Table A page retries</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[ASIZE parameter|ASIZE]]</var></th>
<td xml:space="preserve">Pages in table A</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[ASTRPPG parameter|ASTRPPG]]</var></th>
<td xml:space="preserve">Table A strings per page</td>
<td xml:space="preserve">CREATE command</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[ATRPG parameter|ATRPG]]</var></th>
<td xml:space="preserve">Table A attribute pages</td>
<td xml:space="preserve">CREATE command</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[AUDITOPT parameter|AUDITOPT]]</var></th>
<td xml:space="preserve">Audit options</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[AUTOGCN parameter|AUTOGCN]]</var></th>
<td xml:space="preserve">Garbage collection threshold [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[AUTOSYS parameter|AUTOSYS]]</var></th>
<td xml:space="preserve">Automatic subsystem</td>
<td xml:space="preserve">User n parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[B24EXCWT parameter|B24EXCWT]]</var></th>
<td xml:space="preserve">BATCH204 wait time(ms) between M204.0583 msgs</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[B24SHRWT parameter|B24SHRWT]]</var></th>
<td xml:space="preserve">BATCH204 wait time(ms) between M204.0582 msgs</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[BASECENT parameter|BASECENT]]</var></th>
<td xml:space="preserve">CENTSPLT base century</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[BAUTOINC parameter|BAUTOINC]]</var></th>
<td xml:space="preserve">Number of pages for table B auto increase</td>
<td xml:space="preserve">File manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[BAUTOTYP parameter|BAUTOTYP]]</var></th>
<td xml:space="preserve">Table B auto increase options [[#Obsolete parameters|(obs)]]</td>
<td xml:space="preserve">File manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[BEXTOVFL parameter|BEXTOVFL]]</var></th>
<td xml:space="preserve">Table B extra overflow areas</td>
<td xml:space="preserve">CREATE command</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[BHIGHPG parameter|BHIGHPG]]</var></th>
<td xml:space="preserve">Table B highest active page</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[BIGOBJL parameter|BIGOBJL]]</var></th>
<td xml:space="preserve">Size of object list considered big [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[BLOWPG parameter|BLOWPG]]</var></th>
<td xml:space="preserve">Table B lowest active page</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[BPGPMSTR parameter|BPGPMSTR]]</var></th>
<td xml:space="preserve">Table B pages/master area</td>
<td xml:space="preserve">CREATE command</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[BPGPOVFL parameter|BPGPOVFL]]</var></th>
<td xml:space="preserve">Table B pages/overflow area</td>
<td xml:space="preserve">CREATE command</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[BQLEN parameter|BQLEN]]</var></th>
<td xml:space="preserve">Table B queue length</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[BRECPPG parameter|BRECPPG]]</var></th>
<td xml:space="preserve">Table B records per page</td>
<td xml:space="preserve">CREATE command</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[BRESERVE parameter|BRESERVE]]</var></th>
<td xml:space="preserve">Table B reserve space</td>
<td xml:space="preserve">File manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[BREUSE parameter|BREUSE]]</var></th>
<td xml:space="preserve">Free space required to reuse table B page</td>
<td xml:space="preserve">File manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[BREUSED parameter|BREUSED]]</var></th>
<td xml:space="preserve">Records added reusing record numbers</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[BRLIMSZ parameter|BRLIMSZ]]</var></th>
<td xml:space="preserve">Table B record limit size</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[BSIZE parameter|BSIZE]]</var></th>
<td xml:space="preserve">Pages in table B</td>
<td xml:space="preserve">CREATE command</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[CACHE parameter|CACHE]]</var></th>
<td xml:space="preserve">Cache fast write</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[CASE parameter|CASE]]</var></th>
<td xml:space="preserve">Text input case</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[CAUDIT parameter|CAUDIT]]</var></th>
<td xml:space="preserve">Card audit bits</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[CDMAXP2X parameter|CDMAXP2X]]</var></th>
<td xml:space="preserve">Maximum constraints pages power of 2</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[CDMINP2X parameter|CDMINP2X]]</var></th>
<td xml:space="preserve">Minimum constraints pages power of 2</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[CECHO parameter|CECHO]]</var></th>
<td xml:space="preserve">Card echo</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[CEECHO parameter|CEECHO]]</var></th>
<td xml:space="preserve">Card edit echo</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[CENTSPAN parameter|CENTSPAN]]</var></th>
<td xml:space="preserve">CENTSPAN for date $functions [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[CENTSPLT parameter|CENTSPLT]]</var></th>
<td xml:space="preserve">Century year split</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[CFRJRNL parameter|CFRJRNL]]</var></th>
<td xml:space="preserve">CFR+rec locking stats to CCAJRNL</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[CFRLOOK parameter|CFRLOOK]]</var></th>
<td xml:space="preserve">CFR+rec locking stats to monitor</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[CFRWPCT parameter|CFRWPCT]]</var></th>
<td xml:space="preserve">Max nonswappable CFR waiters</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[CHKPRIV parameter|CHKPRIV]]</var></th>
<td xml:space="preserve">Checkpoint privilege requirement</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[CMSVERSN parameter|CMSVERSN]]</var></th>
<td xml:space="preserve">Version of the CMS interface</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[COMEND parameter|COMEND]]</var></th>
<td xml:space="preserve">End of comment block</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[COMMAND parameter|COMMAND]]</var></th>
<td xml:space="preserve">Model204 command table</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[COMMLOG parameter|COMMLOG]]</var></th>
<td xml:space="preserve">$Command login flags [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[COMPERR parameter|COMPERR]]</var></th>
<td xml:space="preserve">Compiler error reporting options</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[COMPOPT parameter|COMPOPT]]</var></th>
<td xml:space="preserve">Compiler options [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[COMSTART parameter|COMSTART]]</var></th>
<td xml:space="preserve">Start of comment block</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[CP3270 parameter|CP3270]]</var></th>
<td xml:space="preserve">3270 code page ID [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[CPMAX parameter|CPMAX]]</var></th>
<td xml:space="preserve">Max # of checkpoints</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[CPQZACTN parameter|CPQZACTN]]</var></th>
<td xml:space="preserve">Checkpoint extended quiesce timeout action</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[CPQZSECS parameter|CPQZSECS]]</var></th>
<td xml:space="preserve">Number of seconds before CPQZACTN</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[CPSORT parameter|CPSORT]]</var></th>
<td xml:space="preserve">IFAM2 CHKP signon tries</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[CPTIME parameter|CPTIME]]</var></th>
<td xml:space="preserve">Minutes between checkpoints</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[CPTO parameter|CPTO]]</var></th>
<td xml:space="preserve">Checkpoint timeout in seconds</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[CPTQ parameter|CPTQ]]</var></th>
<td xml:space="preserve">Batch quiesce timeout in seconds</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[CPTS parameter|CPTS]]</var></th>
<td xml:space="preserve">Sub-transaction timeout in seconds</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[CPTYPE parameter|CPTYPE]]</var></th>
<td xml:space="preserve">Checkpoint type</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[CPUSLICE parameter|CPUSLICE]]</var></th>
<td xml:space="preserve">CPU slice - CPU</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[CRETRIES parameter|CRETRIES]]</var></th>
<td xml:space="preserve">Table C page retries</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[CRFSCHNL parameter|CRFSCHNL]]</var></th>
<td xml:space="preserve">Full screen CRAM name</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[CRIOCHNL parameter|CRIOCHNL]]</var></th>
<td xml:space="preserve">User language CRAM channel name</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[CS3270 parameter|CS3270]]</var></th>
<td xml:space="preserve">3270 character set ID [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[CSECHO parameter|CSECHO]]</var></th>
<td xml:space="preserve">Card substitution echo</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[CSIPID parameter|CSIPID]]</var></th>
<td xml:space="preserve">TCP/IP system ID [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[CSIZE parameter|CSIZE]]</var></th>
<td xml:space="preserve">Pages in table C</td>
<td xml:space="preserve">CREATE command</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[CURALVL parameter|CURALVL]]</var></th>
<td xml:space="preserve">Add FLS level for file/group</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[CURCLASS parameter|CURCLASS]]</var></th>
<td xml:space="preserve">User priv class (proc) for file/group</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[CURFILE parameter|CURFILE]]</var></th>
<td xml:space="preserve">Current file</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[CURLOC parameter|CURLOC]]</var></th>
<td xml:space="preserve">CURFILE location if remote</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[CURPRIV parameter|CURPRIV]]</var></th>
<td xml:space="preserve">Privs for current file/group</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[CURREC parameter|CURREC]]</var></th>
<td xml:space="preserve">Current record number</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[CURREP31 parameter|CURREP31]]</var></th>
<td xml:space="preserve">Current 31-bit storage for report writers (megabytes) [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[CURREP64 parameter|CURREP64]]</var></th>
<td xml:space="preserve">Current 64-bit storage for report writers (megabytes) [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[CURRLVL parameter|CURRLVL]]</var></th>
<td xml:space="preserve">Read FLS level for file/group</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[CURSLVL parameter|CURSLVL]]</var></th>
<td xml:space="preserve">Select FLS level for file/group</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[CURULVL parameter|CURULVL]]</var></th>
<td xml:space="preserve">Update FLS level for file/group</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[CUSTOM parameter|CUSTOM]]</var></th>
<td xml:space="preserve">Enable special modifications to Model 204</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[D$ONEOF parameter|D$ONEOF]]</var></th>
<td xml:space="preserve">$OneOf item delimiter</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[DACTIVE parameter|DACTIVE]]</var></th>
<td xml:space="preserve">List page active</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[DAUTOINC parameter|DAUTOINC]]</var></th>
<td xml:space="preserve">Number of pages for table D auto increase</td>
<td xml:space="preserve">File manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[DB2PLAN parameter|DB2PLAN]]</var></th>
<td xml:space="preserve">DB2 plan name</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[DB2POINT parameter|DB2POINT]]</var></th>
<td xml:space="preserve">Exec DB2 decimal point</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[DB2QUOTE parameter|DB2QUOTE]]</var></th>
<td xml:space="preserve">Exec DB2 quote</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[DB2THRD parameter|DB2THRD]]</var></th>
<td xml:space="preserve">Number of DB2 threads</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[DEBUGMAX parameter|DEBUGMAX]]</var></th>
<td xml:space="preserve">Maximum debug worker threads [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[DEBUGPAG parameter|DEBUGPAG]]</var></th>
<td xml:space="preserve">Maximum debug CCATEMP pages [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[DEBUGUL parameter|DEBUGUL]]</var></th>
<td xml:space="preserve">User language debug options</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[DEFCENT parameter|DEFCENT]]</var></th>
<td xml:space="preserve">Default century</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[DEFINCP parameter|DEFINCP]]</var></th>
<td xml:space="preserve">Default automatic table size pct increase</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[DHIGHPG parameter|DHIGHPG]]</var></th>
<td xml:space="preserve">Table D highest page used</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[DKUPDTWT parameter|DKUPDTWT]]</var></th>
<td xml:space="preserve"># seconds after file's last update before file is updated on disk</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[DPGSRES parameter|DPGSRES]]</var></th>
<td xml:space="preserve">Table D pages reserved</td>
<td xml:space="preserve">File manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[DPGSUSED parameter|DPGSUSED]]</var></th>
<td xml:space="preserve">Table D pages in use</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[DRESERVE parameter|DRESERVE]]</var></th>
<td xml:space="preserve">List page reserve space</td>
<td xml:space="preserve">File manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[DSIZE parameter|DSIZE]]</var></th>
<td xml:space="preserve">Pages in table D</td>
<td xml:space="preserve">CREATE command</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[DSPOPT parameter|DSPOPT]]</var></th>
<td xml:space="preserve">Data space options</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[DTS parameter|DTS]]</var></th>
<td xml:space="preserve">Date time stamp updates (1=automatic, 0=bypassed)</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[DTSFN parameter|DTSFN]]</var></th>
<td xml:space="preserve">Date time stamp field name</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[DUFILES parameter|DUFILES]]</var></th>
<td xml:space="preserve">Files open in deferred update mode</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[DUMPAOPT parameter|DUMPAOPT]]</var></th>
<td xml:space="preserve">MP altpdl dump options</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[DUMPMOPT parameter|DUMPMOPT]]</var></th>
<td xml:space="preserve">MP maintask dump options</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[DUMPOPTS parameter|DUMPOPTS]]</var></th>
<td xml:space="preserve">Fast Backup/Restore flags [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[DUMPSOPT parameter|DUMPSOPT]]</var></th>
<td xml:space="preserve">MP subtask dump options</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[DUMPTMAX parameter|DUMPTMAX]]</var></th>
<td xml:space="preserve">Maximum CCATEMP usage for DUMP [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[DUMPTMIN parameter|DUMPTMIN]]</var></th>
<td xml:space="preserve">Minimum free CCATEMP for DUMP [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[DUPTERM parameter|DUPTERM]]</var></th>
<td xml:space="preserve">Number of duplicate terminals</td>
<td xml:space="preserve">User n parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[DVADD parameter|DVADD]]</var></th>
<td xml:space="preserve">Device address</td>
<td xml:space="preserve">User n parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[ECISUBS parameter|ECISUBS]]</var></th>
<td xml:space="preserve">ECF initial subtasks</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[ECMODS parameter|ECMODS]]</var></th>
<td xml:space="preserve">ECF maximum modules loaded</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[ECMSUBS parameter|ECMSUBS]]</var></th>
<td xml:space="preserve">ECF maximum subtasks</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[ECNAMES parameter|ECNAMES]]</var></th>
<td xml:space="preserve">ECF maximum call names</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[ECPRIV parameter|ECPRIV]]</var></th>
<td xml:space="preserve">ECF privileges</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[ECPSIZE parameter|ECPSIZE]]</var></th>
<td xml:space="preserve">ECF initial parameter area allocation</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[ECWAIT parameter|ECWAIT]]</var></th>
<td xml:space="preserve">ECF maximum wait for external call</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[EDIT parameter|EDIT]]</var></th>
<td xml:space="preserve">Edit control</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[EHIGHPG parameter|EHIGHPG]]</var></th>
<td xml:space="preserve">Table E highest page used</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[ENQRETRY parameter|ENQRETRY]]</var></th>
<td xml:space="preserve">Retry record locking</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[ENTTAB parameter|ENTTAB]]</var></th>
<td xml:space="preserve">Default entity translation table [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[EOJPW parameter|EOJPW]]</var></th>
<td xml:space="preserve">EOJ password</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[EOVFLADD parameter|EOVFLADD]]</var></th>
<td xml:space="preserve">Records added to extra overflow areas</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[EOVFLDEL parameter|EOVFLDEL]]</var></th>
<td xml:space="preserve">Records deleted from ext ovflow areas</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[EPGSUSED parameter|EPGSUSED]]</var></th>
<td xml:space="preserve">Table E pages in use</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[ERASE parameter|ERASE]]</var></th>
<td xml:space="preserve">Erase-character symbol</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[ERCNT parameter|ERCNT]]</var></th>
<td xml:space="preserve">Error count [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[ERMX parameter|ERMX]]</var></th>
<td xml:space="preserve">Maximum number of errors</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[ERRLEN parameter|ERRLEN]]</var></th>
<td xml:space="preserve">Length of errors saved</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[ERRMSGL parameter|ERRMSGL]]</var></th>
<td xml:space="preserve">Saved error message length</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[ERRSAVE parameter|ERRSAVE]]</var></th>
<td xml:space="preserve">No of errors saved</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[ESIZE parameter|ESIZE]]</var></th>
<td xml:space="preserve">Pages in table E</td>
<td xml:space="preserve">CREATE command</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[EXCPVR parameter|EXCPVR]]</var></th>
<td xml:space="preserve">EXCPVR appendage id</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[EXTNADD parameter|EXTNADD]]</var></th>
<td xml:space="preserve">Extension records added</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[EXTNDEL parameter|EXTNDEL]]</var></th>
<td xml:space="preserve">Extension records deleted</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[FACTDEB parameter|FACTDEB]]</var></th>
<td xml:space="preserve">SirFact debugging flags [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[FASTGLOB parameter|FASTGLOB]]</var></th>
<td xml:space="preserve">Fast global processing</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[FICREATE parameter|FICREATE]]</var></th>
<td xml:space="preserve">Create format</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[FIFLAGS parameter|FIFLAGS]]</var></th>
<td xml:space="preserve">File status switches</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[FIFORMAT parameter|FIFORMAT]]</var></th>
<td xml:space="preserve">Current FPL format</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[FILEMODL parameter|FILEMODL]]</var></th>
<td xml:space="preserve">File model enforced</td>
<td xml:space="preserve">File manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[FILEORG parameter|FILEORG]]</var></th>
<td xml:space="preserve">File organization</td>
<td xml:space="preserve">CREATE command</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[FISTAT parameter|FISTAT]]</var></th>
<td xml:space="preserve">Current status of file</td>
<td xml:space="preserve">File manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[FITRANS parameter|FITRANS]]</var></th>
<td xml:space="preserve">Transform format</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[FIXSIZE parameter|FIXSIZE]]</var></th>
<td xml:space="preserve">Fixed server size requirement</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[FLUSH parameter|FLUSH]]</var></th>
<td xml:space="preserve">Erase-line symbol</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[FNVMASK parameter|FNVMASK]]</var></th>
<td xml:space="preserve">Filename version mask [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[FOPT parameter|FOPT]]</var></th>
<td xml:space="preserve">File options</td>
<td xml:space="preserve">File manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[FRCVOPT parameter|FRCVOPT]]</var></th>
<td xml:space="preserve">File recovery options</td>
<td xml:space="preserve">File manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[FREESIZE parameter|FREESIZE]]</var></th>
<td xml:space="preserve">Pages in free space</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[FRELPREV parameter|FRELPREV]]</var></th>
<td xml:space="preserve">Fast/Reload previous request number [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[FSATTN parameter|FSATTN]]</var></th>
<td xml:space="preserve">Full screen attention key</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[FSOUTPUT parameter|FSOUTPUT]]</var></th>
<td xml:space="preserve">Full screen color and highlighting</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[FSTRMOPT parameter|FSTRMOPT]]</var></th>
<td xml:space="preserve">Full screen terminal options</td>
<td xml:space="preserve">User n parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[FUNCOPTS parameter|FUNCOPTS]]</var></th>
<td xml:space="preserve">Sirius function flags [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[FUNMAXT parameter|FUNMAXT]]</var></th>
<td xml:space="preserve">Default Fast/Unload request timeout (seconds) [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[FUNPARM parameter|FUNPARM]]</var></th>
<td xml:space="preserve">Fast/Unload system flags [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[FUNPGM parameter|FUNPGM]]</var></th>
<td xml:space="preserve">Name of Fast/Unload load module [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[FUNPRMU parameter|FUNPRMU]]</var></th>
<td xml:space="preserve">Fast/Unload user flags [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[FUNTSKN parameter|FUNTSKN]]</var></th>
<td xml:space="preserve">Maximum Fast/Unload tasks [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[FVFPG parameter|FVFPG]]</var></th>
<td xml:space="preserve">Table A few valued field pages</td>
<td xml:space="preserve">CREATE command</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[GCSTATS parameter|GCSTATS]]</var></th>
<td xml:space="preserve">Garbage collector statistics [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[GTBLHASH parameter|GTBLHASH]]</var></th>
<td xml:space="preserve">Number of hashed GTBL buckets</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[GTBLPCT parameter|GTBLPCT]]</var></th>
<td xml:space="preserve">Initial GTBL percentage to allocate for plain globals</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[HASHCELL parameter|HASHCELL]]</var></th>
<td xml:space="preserve">Hash cells per buffer</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[HASHKEY parameter|HASHKEY]]</var></th>
<td xml:space="preserve">Name of file's hash key field</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[HASHSPIL parameter|HASHSPIL]]</var></th>
<td xml:space="preserve">Hash file spill chain length</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[HDRCTL parameter|HDRCTL]]</var></th>
<td xml:space="preserve">Header control</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[HGHREP31 parameter|HGHREP31]]</var></th>
<td xml:space="preserve">High 31-bit storage for report writers (megabytes) [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[HGHREP64 parameter|HGHREP64]]</var></th>
<td xml:space="preserve">High 64-bit storage for report writers (megabytes) [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[HIGHSORT parameter|HIGHSORT]]</var></th>
<td xml:space="preserve">Record with highest sort key</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[HTLEN parameter|HTLEN]]</var></th>
<td xml:space="preserve">Max length of each header or trailer</td>
<td xml:space="preserve">User n parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[IFAMBS parameter|IFAMBS]]</var></th>
<td xml:space="preserve">IFAM2 buffer size</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[IFAMCHNL parameter|IFAMCHNL]]</var></th>
<td xml:space="preserve">IFAM2 CRAM channel name</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[INCCC parameter|INCCC]]</var></th>
<td xml:space="preserve">Input cont char column</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[INCSLICE parameter|INCSLICE]]</var></th>
<td xml:space="preserve">Include slicing limit</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[INMRL parameter|INMRL]]</var></th>
<td xml:space="preserve">Max input record length</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[INPUT parameter|INPUT]]</var></th>
<td xml:space="preserve">Input device name</td>
<td xml:space="preserve">User n parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[IODEV parameter|IODEV]]</var></th>
<td xml:space="preserve">Type of I/O device</td>
<td xml:space="preserve">User n parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[IOSLICE parameter|IOSLICE]]</var></th>
<td xml:space="preserve">CPU slice - IO</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[IPADDR parameter|IPADDR]]</var></th>
<td xml:space="preserve">IP address</td>
<td xml:space="preserve">User n parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[IVERIFY parameter|IVERIFY]]</var></th>
<td xml:space="preserve">Write verify - initialization</td>
<td xml:space="preserve">CREATE command</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[JANDEBM parameter|JANDEBM]]</var></th>
<td xml:space="preserve">Janus Web debugging message flags [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[JESID parameter|JESID]]</var></th>
<td xml:space="preserve">JES job id</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[JOBNM parameter|JOBNM]]</var></th>
<td xml:space="preserve">Job name</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[JOBSTEP parameter|JOBSTEP]]</var></th>
<td xml:space="preserve">Job step name</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[KOMMOPT parameter|KOMMOPT]]</var></th>
<td xml:space="preserve">KOMM options [[#Obsolete parameters|(obs)]]</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[LANGFILE parameter|LANGFILE]]</var></th>
<td xml:space="preserve">Language name for file</td>
<td xml:space="preserve">File manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[LANGUSER parameter|LANGUSER]]</var></th>
<td xml:space="preserve">Language name for thread</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[LAUDIT parameter|LAUDIT]]</var></th>
<td xml:space="preserve">Line audit bits</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[LAUDPROC parameter|LAUDPROC]]</var></th>
<td xml:space="preserve">Length of audit procedure names</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[LCPDLST parameter|LCPDLST]]</var></th>
<td xml:space="preserve">Length of C push-down list</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[LDKBMW parameter|LDKBMW]]</var></th>
<td xml:space="preserve"># of pages in DKBM stat window</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[LDKBMWND parameter|LDKBMWND]]</var></th>
<td xml:space="preserve"># of pages in DKBM LRU window</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[LDKBMWNG parameter|LDKBMWNG]]</var></th>
<td xml:space="preserve"># of pages in above-the-bar DKBM LRU window</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[LECHO parameter|LECHO]]</var></th>
<td xml:space="preserve">Line echo</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[LEECHO parameter|LEECHO]]</var></th>
<td xml:space="preserve">Line edit echo</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[LENQTBL parameter|LENQTBL]]</var></th>
<td xml:space="preserve"># of resource locking table entries per user</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[LFSCB parameter|LFSCB]]</var></th>
<td xml:space="preserve">Length of full screen buffer</td>
<td xml:space="preserve">User n parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[LFTBL parameter|LFTBL]]</var></th>
<td xml:space="preserve">Length of FTBL</td>
<td xml:space="preserve">User n parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[LGTBL parameter|LGTBL]]</var></th>
<td xml:space="preserve">Length of global variable table</td>
<td xml:space="preserve">User n parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[LHEAP parameter|LHEAP]]</var></th>
<td xml:space="preserve">Length of heap</td>
<td xml:space="preserve">User n parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[LIBUFF parameter|LIBUFF]]</var></th>
<td xml:space="preserve">Length of input buffer</td>
<td xml:space="preserve">User n parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[LINEND parameter|LINEND]]</var></th>
<td xml:space="preserve">Logical line end symbol</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[LITBL parameter|LITBL]]</var></th>
<td xml:space="preserve">Length of ITBL</td>
<td xml:space="preserve">User n parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[LNTBL parameter|LNTBL]]</var></th>
<td xml:space="preserve">Length of NTBL</td>
<td xml:space="preserve">User n parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[LOBUFF parameter|LOBUFF]]</var></th>
<td xml:space="preserve">Length of output buffer</td>
<td xml:space="preserve">User n parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[LOCATION parameter|LOCATION]]</var></th>
<td xml:space="preserve">D204 location</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[LOGADD parameter|LOGADD]]</var></th>
<td xml:space="preserve">Room for password additions</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[LOGFAIL parameter|LOGFAIL]]</var></th>
<td xml:space="preserve">Action to be taken if logtry exceeded</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[LOGONENQ parameter|LOGONENQ]]</var></th>
<td xml:space="preserve">Userid logon enqueue</td>
<td xml:space="preserve">User n parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[LOGTRY parameter|LOGTRY]]</var></th>
<td xml:space="preserve">Maximum number of login attempts allowed per thread</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[LOUTPB parameter|LOUTPB]]</var></th>
<td xml:space="preserve">Length of output page buffer</td>
<td xml:space="preserve">User n parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[LPDLST parameter|LPDLST]]</var></th>
<td xml:space="preserve">Length of user push down list</td>
<td xml:space="preserve">User n parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[LPFORCE parameter|LPFORCE]]</var></th>
<td xml:space="preserve">Force procedure audit</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[LQTBL parameter|LQTBL]]</var></th>
<td xml:space="preserve">Length of QTBL</td>
<td xml:space="preserve">User n parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[LRECLTBL parameter|LRECLTBL]]</var></th>
<td xml:space="preserve">Length of record locking table (deprecated - use LRETBL)</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[LRESLTBL parameter|LRESLTBL]]</var></th>
<td xml:space="preserve"># of resource locking table entries per user (deprecated - use LENQTBL)</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[LRETBL parameter|LRETBL]]</var></th>
<td xml:space="preserve">Length of record locking table</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[LRUPG parameter|LRUPG]]</var></th>
<td xml:space="preserve">LRU pages remembered</td>
<td xml:space="preserve">EXEC PARM field</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[LRUTIM parameter|LRUTIM]]</var></th>
<td xml:space="preserve">Time to flush obsolete LRU references</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[LSECHO parameter|LSECHO]]</var></th>
<td xml:space="preserve">Line substitution echo</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[LSERVER parameter|LSERVER]]</var></th>
<td xml:space="preserve">Server size requirement</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[LSERVERN parameter|LSERVERN]]</var></th>
<td xml:space="preserve">NSA server size requirement</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[LSERVERG parameter|LSERVERG]]</var></th>
<td xml:space="preserve">ATB server size requirement</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[LSERVPD parameter|LSERVPD]]</var></th>
<td xml:space="preserve">Length of scheduler pdl [[#Obsolete parameters|(obs)]]</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[LSTBL parameter|LSTBL]]</var></th>
<td xml:space="preserve">Length of STBL</td>
<td xml:space="preserve">User n parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[LSTRLOB parameter|LSTRLOB]]</var></th>
<td xml:space="preserve">Treat LOBs as Longstrings [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[LTTBL parameter|LTTBL]]</var></th>
<td xml:space="preserve">Length of TTBL</td>
<td xml:space="preserve">User n parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[LVLTRC parameter|LVLTRC]]</var></th>
<td xml:space="preserve">End of input stream message</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[LVTBL parameter|LVTBL]]</var></th>
<td xml:space="preserve">Length of VTBL</td>
<td xml:space="preserve">User n parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[LXTBL parameter|LXTBL]]</var></th>
<td xml:space="preserve">Length of XTBL</td>
<td xml:space="preserve">User n parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[MARKSAN parameter|MARKSAN]]</var></th>
<td xml:space="preserve">Maximum items in a MarksArray [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[MAXAUSER parameter|MAXAUSER]]</var></th>
<td xml:space="preserve">Maximum active interactive users [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[MAXAUSEW parameter|MAXAUSEW]]</var></th>
<td xml:space="preserve">Minimum seconds between MAXAUSER warnings [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[MAXBG parameter|MAXBG]]</var></th>
<td xml:space="preserve">Maximum background/independent Daemons [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[MAXBUF parameter|MAXBUF]]</var></th>
<td xml:space="preserve">Maximum number of buffers</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[MAXDAEM parameter|MAXDAEM]]</var></th>
<td xml:space="preserve">Maximum Daemon objects per user [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[MAXHDR parameter|MAXHDR]]</var></th>
<td xml:space="preserve">Max number of headers</td>
<td xml:space="preserve">User n parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[MAXINCBP parameter|MAXINCBP]]</var></th>
<td xml:space="preserve">Maximum dynamic table B size pct increase</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[MAXINCL parameter|MAXINCL]]</var></th>
<td xml:space="preserve">Max Include level</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[MAXOBUF parameter|MAXOBUF]]</var></th>
<td xml:space="preserve">Maximum open buffers per user</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[MAXOND parameter|MAXOND]]</var></th>
<td xml:space="preserve">Maximum ON unit recursion depth</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[MAXRDS parameter|MAXRDS]]</var></th>
<td xml:space="preserve">Maximum RSA subtasks [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[MAXREP31 parameter|MAXREP31]]</var></th>
<td xml:space="preserve">Maximum 31-bit storage for report writers (megabytes) [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[MAXREP64 parameter|MAXREP64]]</var></th>
<td xml:space="preserve">Maximum 64-bit storage for report writers (megabytes) [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[MAXSIMIO parameter|MAXSIMIO]]</var></th>
<td xml:space="preserve">Max simultaneous disk I/Os</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[MAXSPINS parameter|MAXSPINS]]</var></th>
<td xml:space="preserve">Max number of spins for mplock</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[MAXTIME parameter|MAXTIME]]</var></th>
<td xml:space="preserve">Maximum run time</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[MAXTRL parameter|MAXTRL]]</var></th>
<td xml:space="preserve">Max number of trailers</td>
<td xml:space="preserve">User n parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[MAXUD parameter|MAXUD]]</var></th>
<td xml:space="preserve">Long update unit durations (ms)</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[MBSCAN parameter|MBSCAN]]</var></th>
<td xml:space="preserve">Max table B records scan</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[MCNCT parameter|MCNCT]]</var></th>
<td xml:space="preserve">Max connect time</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[MCPU parameter|MCPU]]</var></th>
<td xml:space="preserve">Max CPU time</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[MDKRD parameter|MDKRD]]</var></th>
<td xml:space="preserve">Max disk reads</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[MDKWR parameter|MDKWR]]</var></th>
<td xml:space="preserve">Max disk writes</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[MINBUF parameter|MINBUF]]</var></th>
<td xml:space="preserve">Minimum number of buffers</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[MISCOPT parameter|MISCOPT]]</var></th>
<td xml:space="preserve">Miscellaneous system options [[#Obsolete parameters|(obs)]]</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[MODEL parameter|MODEL]]</var></th>
<td xml:space="preserve">Terminal model</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[MODPROT parameter|MODPROT]]</var></th>
<td xml:space="preserve">204 load module protection flags [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[MODTIM parameter|MODTIM]]</var></th>
<td xml:space="preserve">Julian date-time of Model 204 module</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[MONPARM parameter|MONPARM]]</var></th>
<td xml:space="preserve">SirMon system flags [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[MOUT parameter|MOUT]]</var></th>
<td xml:space="preserve">Max output lines</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[MPOPTS parameter|MPOPTS]]</var></th>
<td xml:space="preserve">MP user language options</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[MPSYS parameter|MPSYS]]</var></th>
<td xml:space="preserve">MP/204 system flags</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[MQBUFSZ parameter|MQBUFSZ]]</var></th>
<td xml:space="preserve">Initial universal buffer size</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[MQDEQMAN parameter|MQDEQMAN]]</var></th>
<td xml:space="preserve">MQ/204 default queue manager</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[MQINTASK parameter|MQINTASK]]</var></th>
<td xml:space="preserve">Initial MQ/204 subtasks</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[MQMXTASK parameter|MQMXTASK]]</var></th>
<td xml:space="preserve">Maximum MQ/204 subtasks</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[MQSUBREL parameter|MQSUBREL]]</var></th>
<td xml:space="preserve">Release MQ subtask (1-release, 0 - retain)</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[MQWAIT parameter|MQWAIT]]</var></th>
<td xml:space="preserve">Maximum wait for MQ/204 subtask</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[MSGCTL parameter|MSGCTL]]</var></th>
<td xml:space="preserve">Message printing options</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[MSRES parameter|MSRES]]</var></th>
<td xml:space="preserve">Maximum SREs per file in RETBL</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[MSTRADD parameter|MSTRADD]]</var></th>
<td xml:space="preserve">Records added to master areas</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[MSTRDEL parameter|MSTRDEL]]</var></th>
<td xml:space="preserve">Records deleted from master areas</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[MUDD parameter|MUDD]]</var></th>
<td xml:space="preserve">Max UDD lines</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[MVFPG parameter|MVFPG]]</var></th>
<td xml:space="preserve">Table A many valued field pages</td>
<td xml:space="preserve">CREATE command</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[MXIJLOG parameter|MXIJLOG]]</var></th>
<td xml:space="preserve">Number of 4k pages for JLOG statistics</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[NBKPG parameter|NBKPG]]</var></th>
<td xml:space="preserve">Number of backpages kept</td>
<td xml:space="preserve">User n parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[NCMPBUF parameter|NCMPBUF]]</var></th>
<td xml:space="preserve">Number of compression buffers [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[NDCBS parameter|NDCBS]]</var></th>
<td xml:space="preserve">Number of file DCBs</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[NDIR parameter|NDIR]]</var></th>
<td xml:space="preserve">Number of file directory entries</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[NECBS parameter|NECBS]]</var></th>
<td xml:space="preserve">Number of ECBs</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[NFILES parameter|NFILES]]</var></th>
<td xml:space="preserve">Number of file areas</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[NGROUP parameter|NGROUP]]</var></th>
<td xml:space="preserve">Max # of open groups</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[NJBUFF parameter|NJBUFF]]</var></th>
<td xml:space="preserve">Number of journal buffers</td>
<td xml:space="preserve">EXEC PARM field</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[NLBUFF parameter|NLBUFF]]</var></th>
<td xml:space="preserve">Number of CCAJLOG buffers</td>
<td xml:space="preserve">EXEC PARM field</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[NLRUQ parameter|NLRUQ]]</var></th>
<td xml:space="preserve"># of DKBM LRU queues</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[NLRUQG parameter|NLRUQG]]</var></th>
<td xml:space="preserve"># of above-the-bar DKBM LRU queues</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[NMPSUBS parameter|NMPSUBS]]</var></th>
<td xml:space="preserve">Number of offload subtasks</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[NMPSUBZ parameter|NMPSUBZ]]</var></th>
<td xml:space="preserve">Number of zIIP eligible subtasks</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[NOECBS parameter|NOECBS]]</var></th>
<td xml:space="preserve">Number of ECBs</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[NORQS parameter|NORQS]]</var></th>
<td xml:space="preserve">Number of requests preserved</td>
<td xml:space="preserve">User n parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[NOTERM parameter|NOTERM]]</var></th>
<td xml:space="preserve">Number of terminals on line</td>
<td xml:space="preserve">User n parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[NOTHREAD parameter|NOTHREAD]]</var></th>
<td xml:space="preserve">Number of inbound threads</td>
<td xml:space="preserve">User n parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[NOUTBUF parameter|NOUTBUF]]</var></th>
<td xml:space="preserve"># of full screen output buffers</td>
<td xml:space="preserve">User n parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[NRMTFILE parameter|NRMTFILE]]</var></th>
<td xml:space="preserve">Number of remote file areas</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[NRMTLOCS parameter|NRMTLOCS]]</var></th>
<td xml:space="preserve">Number of remote locations</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[NSERVS parameter|NSERVS]]</var></th>
<td xml:space="preserve">Number of servers</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[NSUBTKS parameter|NSUBTKS]]</var></th>
<td xml:space="preserve">Max number of pseudo-subtasks</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[NUMBUF parameter|NUMBUF]]</var></th>
<td xml:space="preserve">Number of buffers</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[NUMBUFG parameter|NUMBUFG]]</var></th>
<td xml:space="preserve">Number of above-the-bar buffers</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[NUSERS parameter|NUSERS]]</var></th>
<td xml:space="preserve">Number of users</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[OBJSTAT parameter|OBJSTAT]]</var></th>
<td xml:space="preserve">Sirius object statistic flags [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[OBJSTMIN parameter|OBJSTMIN]]</var></th>
<td xml:space="preserve">Sirius object statistic minimum [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[OIDEPTH parameter|OIDEPTH]]</var></th>
<td xml:space="preserve">No. levels of ordered index nodes</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[OILEAVES parameter|OILEAVES]]</var></th>
<td xml:space="preserve">No. ordered index nodes: leaves</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[OILPACT parameter|OILPACT]]</var></th>
<td xml:space="preserve">Ordered index list page active</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[OINBYTES parameter|OINBYTES]]</var></th>
<td xml:space="preserve">No. ordered index bytes</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[OINENTRY parameter|OINENTRY]]</var></th>
<td xml:space="preserve">No. ordered index entries</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[OINODES parameter|OINODES]]</var></th>
<td xml:space="preserve">No. ordered index nodes: all levels</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[OPENCTL parameter|OPENCTL]]</var></th>
<td xml:space="preserve">Open control flags</td>
<td xml:space="preserve">File manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[OPSYS parameter|OPSYS]]</var></th>
<td xml:space="preserve">Operating system</td>
<td xml:space="preserve">EXEC PARM field</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[OUTCCC parameter|OUTCCC]]</var></th>
<td xml:space="preserve">Output cont char column</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[OUTLPP parameter|OUTLPP]]</var></th>
<td xml:space="preserve">Output lines per page</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[OUTMRL parameter|OUTMRL]]</var></th>
<td xml:space="preserve">Max output record length</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[OUTPNO parameter|OUTPNO]]</var></th>
<td xml:space="preserve">Output page number</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[OUTPUT parameter|OUTPUT]]</var></th>
<td xml:space="preserve">Output device name</td>
<td xml:space="preserve">User n parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[OVFLADD parameter|OVFLADD]]</var></th>
<td xml:space="preserve">Records added to overflow areas</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[OVFLDEL parameter|OVFLDEL]]</var></th>
<td xml:space="preserve">Records deleted from overflow areas</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[PAGE parameter|PAGE]]</var></th>
<td xml:space="preserve">Backpage command character</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[PAGEFIX parameter|PAGEFIX]]</var></th>
<td xml:space="preserve">Page-fix parameter string</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[PAGESZ parameter|PAGESZ]]</var></th>
<td xml:space="preserve">File page size</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[PDSIZE parameter|PDSIZE]]</var></th>
<td xml:space="preserve">Pages per procedure dictionary section</td>
<td xml:space="preserve">CREATE command</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[PDSTRPPG parameter|PDSTRPPG]]</var></th>
<td xml:space="preserve">Names/procedure dictionary page limit</td>
<td xml:space="preserve">CREATE command</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[PERFOPT parameter|PERFOPT]]</var></th>
<td xml:space="preserve">Sirius Performance Enhancement flags [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[PERFOPT2 parameter|PERFOPT2]]</var></th>
<td xml:space="preserve">Sirius Performance Enhancement flags V2 [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[PGSEP parameter|PGSEP]]</var></th>
<td xml:space="preserve">Lines between pages</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[POLLNO parameter|POLLNO]]</var></th>
<td xml:space="preserve">Relative polling number</td>
<td xml:space="preserve">User n parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[PQOOPT parameter|PQOOPT]]</var></th>
<td xml:space="preserve">Parallel query options</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[PQOSYS parameter|PQOSYS]]</var></th>
<td xml:space="preserve">Parallel query system options</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[PRCLDEF parameter|PRCLDEF]]</var></th>
<td xml:space="preserve">Default user class for procedures</td>
<td xml:space="preserve">File manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[PRIOMAX parameter|PRIOMAX]]</var></th>
<td xml:space="preserve">Max age priority</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[PRIORITY parameter|PRIORITY]]</var></th>
<td xml:space="preserve">User priority</td>
<td xml:space="preserve">User n parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[PRIVDEF parameter|PRIVDEF]]</var></th>
<td xml:space="preserve">Default file privileges</td>
<td xml:space="preserve">File manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[PROMPT parameter|PROMPT]]</var></th>
<td xml:space="preserve">Prompt control</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[PUPDTH parameter|PUPDTH]]</var></th>
<td xml:space="preserve">Procedure update hash value [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[PWDEXP parameter|PWDEXP]]</var></th>
<td xml:space="preserve">Password expiration days</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[PWDPURGE parameter|PWDPURGE]]</var></th>
<td xml:space="preserve">Password purge days</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[PWDWARN parameter|PWDWARN]]</var></th>
<td xml:space="preserve">Password warning days</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[RCVOPT parameter|RCVOPT]]</var></th>
<td xml:space="preserve">Recovery options</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[READLVL parameter|READLVL]]</var></th>
<td xml:space="preserve">Default read FLS level</td>
<td xml:space="preserve">File manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[RECLOCKO parameter|RECLOCKO]]</var></th>
<td xml:space="preserve">Record locking options [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[RECRDOPT parameter|RECRDOPT]]</var></th>
<td xml:space="preserve">Record options</td>
<td xml:space="preserve">CREATE command</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[RECSCTY parameter|RECSCTY]]</var></th>
<td xml:space="preserve">Name of file's record security field</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[RECSECID parameter|RECSECID]]</var></th>
<td xml:space="preserve">Record security id</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[RESCURR parameter|RESCURR]]</var></th>
<td xml:space="preserve">Current storage used for resident requests</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[RESHIGH parameter|RESHIGH]]</var></th>
<td xml:space="preserve">HWM for storage used for resident requests</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[RESLTHR parameter|RESLTHR]]</var></th>
<td xml:space="preserve">APSY load threshold for making request resident</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[RESPAGE parameter|RESPAGE]]</var></th>
<td xml:space="preserve">Number of resident N/QTBL ATB pages</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[RESSIZE parameter|RESSIZE]]</var></th>
<td xml:space="preserve">Maximum storage to be used for resident requests</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[RESTARTU parameter|RESTARTU]]</var></th>
<td xml:space="preserve">Restart utility flags [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">EXEC PARM field</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[RESTHRSH parameter|RESTHRSH]]</var></th>
<td xml:space="preserve">Server write threshold for making request resident</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[RETRVBUF parameter|RETRVBUF]]</var></th>
<td xml:space="preserve">Size of retrieve key buffer [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[RETRVKEY parameter|RETRVKEY]]</var></th>
<td xml:space="preserve">Retrieve PF key</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[RETRVOPT parameter|RETRVOPT]]</var></th>
<td xml:space="preserve">Retrieve key options [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[RPTCNT parameter|RPTCNT]]</var></th>
<td xml:space="preserve">Samples between performance stat lines</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SCANPARM parameter|SCANPARM]]</var></th>
<td xml:space="preserve">SirScan system flags [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SCANTIME parameter|SCANTIME]]</var></th>
<td xml:space="preserve">Maximum seconds between SirScan info messages [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SCHDOFL parameter|SCHDOFL]]</var></th>
<td xml:space="preserve">Threshold for activating subtasks</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SCHDOFLZ parameter|SCHDOFLZ]]</var></th>
<td xml:space="preserve">Threshold for activating zIIP subtasks</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SCHDOPT parameter|SCHDOPT]]</var></th>
<td xml:space="preserve">Scheduler options</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SCHDOPT1 parameter|SCHDOPT1]]</var></th>
<td xml:space="preserve">Scheduler options</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SCRNSTBL parameter|SCRNSTBL]]</var></th>
<td xml:space="preserve">STBL size for Screen objects [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SDAEMDEL parameter|SDAEMDEL]]</var></th>
<td xml:space="preserve">SDaemon swap delay (MS) [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SDAEMDEV parameter|SDAEMDEV]]</var></th>
<td xml:space="preserve">IODEV number for SDaemons [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SDEBGUIP parameter|SDEBGUIP]]</var></th>
<td xml:space="preserve">Sirius debug default GUI port number [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SDEBWRKP parameter|SDEBWRKP]]</var></th>
<td xml:space="preserve">Sirius debug default worker port number [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SDMOPT parameter|SDMOPT]]</var></th>
<td xml:space="preserve">SDaemon options [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SECPLIST parameter|SECPLIST]]</var></th>
<td xml:space="preserve">Security parameter-list name for default user</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SECTRLOG parameter|SECTRLOG]]</var></th>
<td xml:space="preserve">Security trusted login environment</td>
<td xml:space="preserve">User n parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SECTY parameter|SECTY]]</var></th>
<td xml:space="preserve">Low-level security in effect</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SELLVL parameter|SELLVL]]</var></th>
<td xml:space="preserve">Default select FLS level</td>
<td xml:space="preserve">File manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SEQOPT parameter|SEQOPT]]</var></th>
<td xml:space="preserve">Sequential processing options</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SEQPDL parameter|SEQPDL]]</var></th>
<td xml:space="preserve">Minimum PDL available for sequencer</td>
<td xml:space="preserve">User n parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SERVACTV parameter|SERVACTV]]</var></th>
<td xml:space="preserve">Current size of this server</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SERVGA parameter|SERVGA]]</var></th>
<td xml:space="preserve">Above the bar server areas</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SERVGSZ parameter|SERVGSZ]]</var></th>
<td xml:space="preserve">Above the bar server size</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SERVNSA parameter|SERVNSA]]</var></th>
<td xml:space="preserve">Non swappable server areas</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SERVNSSZ parameter|SERVNSSZ]]</var></th>
<td xml:space="preserve">Non swappable server area size</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SERVSIZE parameter|SERVSIZE]]</var></th>
<td xml:space="preserve">Maximum size of this server</td>
<td xml:space="preserve">User n parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SESDEBUG parameter|SESDEBUG]]</var></th>
<td xml:space="preserve">Session debugging flags [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SESDEFOW parameter|SESDEFOW]]</var></th>
<td xml:space="preserve">Default open wait time in seconds [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SESDEFTO parameter|SESDEFTO]]</var></th>
<td xml:space="preserve">Default session timeout seconds [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SESMAXTO parameter|SESMAXTO]]</var></th>
<td xml:space="preserve">Maximum session timeout in seconds [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SESNPRV parameter|SESNPRV]]</var></th>
<td xml:space="preserve">Maximum number of private sessions [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SESNPUB parameter|SESNPUB]]</var></th>
<td xml:space="preserve">Maximum number of public sessions [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SESOPT parameter|SESOPT]]</var></th>
<td xml:space="preserve">Session options [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SESUMAX parameter|SESUMAX]]</var></th>
<td xml:space="preserve">Maximum private sessions per user [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SIOSLICE parameter|SIOSLICE]]</var></th>
<td xml:space="preserve">Server slice - IO</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SIRAPSYF parameter|SIRAPSYF]]</var></th>
<td xml:space="preserve">Sirius APSY flags [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SIRCOMP parameter|SIRCOMP]]</var></th>
<td xml:space="preserve">Sirius compilation flags [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SIREDIT parameter|SIREDIT]]</var></th>
<td xml:space="preserve">Sirius EDIT flags [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SIRFACT parameter|SIRFACT]]</var></th>
<td xml:space="preserve">SirFact flags [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SIRFUNC parameter|SIRFUNC]]</var></th>
<td xml:space="preserve">Function table options [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">EXEC PARM field</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SIRMSG parameter|SIRMSG]]</var></th>
<td xml:space="preserve">Upper casing of msgs/parm descriptions (deprecated - use UPCASMSG) [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SIRPDLHW parameter|SIRPDLHW]]</var></th>
<td xml:space="preserve">Accurate PDL HWM calculation [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SIRPRMPT parameter|SIRPRMPT]]</var></th>
<td xml:space="preserve">Sirius full screen prompt [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SIRTERM parameter|SIRTERM]]</var></th>
<td xml:space="preserve">Sirius terminal options [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SIRTUNE parameter|SIRTUNE]]</var></th>
<td xml:space="preserve">SirTune flags [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">EXEC PARM field</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SLICEMAX parameter|SLICEMAX]]</var></th>
<td xml:space="preserve">Max age slice</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SMFLORN parameter|SMFLORN]]</var></th>
<td xml:space="preserve">SMF logout rec #</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SMFSLRN parameter|SMFSLRN]]</var></th>
<td xml:space="preserve">SMF "since last" rec #</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SMFSVC parameter|SMFSVC]]</var></th>
<td xml:space="preserve">SMF SVC # [[#Obsolete parameters|(obs)]]</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SMPLTIM parameter|SMPLTIM]]</var></th>
<td xml:space="preserve">Performance sample time</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SMTPCADD parameter|SMTPCADD]]</var></th>
<td xml:space="preserve">Default SMTP client address</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SMTPCPRT parameter|SMTPCPRT]]</var></th>
<td xml:space="preserve">Default SMTP client port</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SMTPSADD parameter|SMTPSADD]]</var></th>
<td xml:space="preserve">Default SMTP server address</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SMTPSPRT parameter|SMTPSPRT]]</var></th>
<td xml:space="preserve">Default SMTP server port</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SNAPCLS parameter|SNAPCLS]]</var></th>
<td xml:space="preserve">Class for spun-off snaps</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SNAPCTL parameter|SNAPCTL]]</var></th>
<td xml:space="preserve">Snap/dump options</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SNAPDST parameter|SNAPDST]]</var></th>
<td xml:space="preserve">Destination for spun-off snaps</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SNAPFAIL parameter|SNAPFAIL]]</var></th>
<td xml:space="preserve">Number of CCASNAP failures</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SNAPFLIM parameter|SNAPFLIM]]</var></th>
<td xml:space="preserve">0 or max snap failures allowed</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SNAPID parameter|SNAPID]]</var></th>
<td xml:space="preserve">Number of snaps so far</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SNAPLIM parameter|SNAPLIM]]</var></th>
<td xml:space="preserve">0 or max number of snaps allowed</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SNAPLIMD parameter|SNAPLIMD]]</var></th>
<td xml:space="preserve">0 or max number of occurrences of any particular snap [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SNAPPDLX parameter|SNAPPDLX]]</var></th>
<td xml:space="preserve">Snap pdl extension option</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SOCKMAX parameter|SOCKMAX]]</var></th>
<td xml:space="preserve">Maximum sockets per user [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SORTKEY parameter|SORTKEY]]</var></th>
<td xml:space="preserve">Name of file's sort key field</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SPANSIZE parameter|SPANSIZE]]</var></th>
<td xml:space="preserve">SPANSIZE for date $functions [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SPCORE parameter|SPCORE]]</var></th>
<td xml:space="preserve">Spare core reserved</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SPILLADD parameter|SPILLADD]]</var></th>
<td xml:space="preserve">Spill indicator - adds</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SPILLDEL parameter|SPILLDEL]]</var></th>
<td xml:space="preserve">Spill indicator - deletes</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SQLBSCAN parameter|SQLBSCAN]]</var></th>
<td xml:space="preserve">Max RSQL read/writes</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SQLBUFSZ parameter|SQLBUFSZ]]</var></th>
<td xml:space="preserve">Remote SQL server buffer size</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SQLCNVER parameter|SQLCNVER]]</var></th>
<td xml:space="preserve">SQL fetch option</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SQLFILE parameter|SQLFILE]]</var></th>
<td xml:space="preserve">SQL generated file names</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SQLIQBSZ parameter|SQLIQBSZ]]</var></th>
<td xml:space="preserve">SQL intrnl query buff size</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SQLLPLIM parameter|SQLLPLIM]]</var></th>
<td xml:space="preserve">SQL read/writes per slice</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SRSDEFTO parameter|SRSDEFTO]]</var></th>
<td xml:space="preserve">Default saved record set timeout [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SRSMAX parameter|SRSMAX]]</var></th>
<td xml:space="preserve">Maximum number of saved record sets [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SRSMAXTO parameter|SRSMAXTO]]</var></th>
<td xml:space="preserve">Maximum saved record set timeout [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SRSMAXUS parameter|SRSMAXUS]]</var></th>
<td xml:space="preserve">Maximum saved record sets per user [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SRSPARM parameter|SRSPARM]]</var></th>
<td xml:space="preserve">Saved record set parameters [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SRVSLICE parameter|SRVSLICE]]</var></th>
<td xml:space="preserve">Server slice - CPU</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[STEPNM parameter|STEPNM]]</var></th>
<td xml:space="preserve">Step name</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[STORCUR parameter|STORCUR]]</var></th>
<td xml:space="preserve">Current dynamic storage allocation</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[STORCURG parameter|STORCURG]]</var></th>
<td xml:space="preserve">Current mbytes ATB storage allocated</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[STORINIT parameter|STORINIT]]</var></th>
<td xml:space="preserve">Storage acquired during initialization</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[STORMAX parameter|STORMAX]]</var></th>
<td xml:space="preserve">Dynamic storage high water mark</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[STORMAXG parameter|STORMAXG]]</var></th>
<td xml:space="preserve">HWM mbytes ATB storage allocated</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[STORMXZP parameter|STORMXZP]]</var></th>
<td xml:space="preserve">HWM mbytes storage allocated with 1 MB pages</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[STORZPAG parameter|STORZPAG]]</var></th>
<td xml:space="preserve">Current mbytes storage allocated with 1 MB pages</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SUB parameter|SUB]]</var></th>
<td xml:space="preserve">Substitution control</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SVIOMAXT parameter|SVIOMAXT]]</var></th>
<td xml:space="preserve">Server tracks per user</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SYSDATE parameter|SYSDATE]]</var></th>
<td xml:space="preserve">System initial date</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SYSDINFO parameter|SYSDINFO]]</var></th>
<td xml:space="preserve">System date message</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SYSID parameter|SYSID]]</var></th>
<td xml:space="preserve">SMF system identification</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SYSOPT parameter|SYSOPT]]</var></th>
<td xml:space="preserve">System options</td>
<td xml:space="preserve">EXEC PARM field</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SYSOPT2 parameter|SYSOPT2]]</var></th>
<td xml:space="preserve">System options</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SYSTIME parameter|SYSTIME]]</var></th>
<td xml:space="preserve">System initial time</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[TABSP parameter|TABSP]]</var></th>
<td xml:space="preserve">Tab spacing</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[TCPNAME parameter|TCPNAME]]</var></th>
<td xml:space="preserve">TCP/IP service machine name</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[TCPOPTS parameter|TCPOPTS]]</var></th>
<td xml:space="preserve">TCP options</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[TCPSERV parameter|TCPSERV]]</var></th>
<td xml:space="preserve">Name of TCP/IP server address space [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[TCPSUBSY parameter|TCPSUBSY]]</var></th>
<td xml:space="preserve">Subsystem name for TCP/IP server [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[TCPTYPE parameter|TCPTYPE]]</var></th>
<td xml:space="preserve">Type of TCP/IP server address space [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[TEMPBOP parameter|TEMPBOP]]</var></th>
<td xml:space="preserve">Number of CCATEMP pages reserved for backout data</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[TEMPCUR parameter|TEMPCUR]]</var></th>
<td xml:space="preserve">CCATEMP pages currently in use</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[TEMPCURE parameter|TEMPCURE]]</var></th>
<td xml:space="preserve">CCATEMP pages currently in use (expansion area)</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[TEMPCURS parameter|TEMPCURS]]</var></th>
<td xml:space="preserve">CCATEMP pages currently in use (small model page pool)</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[TEMPHIE parameter|TEMPHIE]]</var></th>
<td xml:space="preserve">CCATEMP HWM pages used (expansion area)</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[TEMPHIS parameter|TEMPHIS]]</var></th>
<td xml:space="preserve">CCATEMP HWM pages used (small model page pool)</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[TEMPMAX parameter|TEMPMAX]]</var></th>
<td xml:space="preserve">CCATEMP highest number of pages used</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[TEMPPAGE parameter|TEMPPAGE]]</var></th>
<td xml:space="preserve">Number of CCATEMP pages in storage</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[TEMPSIZE parameter|TEMPSIZE]]</var></th>
<td xml:space="preserve">CCATEMP size in pages</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[TERMBUF parameter|TERMBUF]]</var></th>
<td xml:space="preserve"># of full screen input buffers</td>
<td xml:space="preserve">User n parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[TERMID parameter|TERMID]]</var></th>
<td xml:space="preserve">Terminal id</td>
<td xml:space="preserve">User n parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[TERMOPT parameter|TERMOPT]]</var></th>
<td xml:space="preserve">Terminal options</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[TIMELEF parameter|TIMELEF]]</var></th>
<td xml:space="preserve">Time left before end of run</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[TIMEOUT parameter|TIMEOUT]]</var></th>
<td xml:space="preserve">Inactive thread timeout in seconds</td>
<td xml:space="preserve">User n parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[TIMESTOP parameter|TIMESTOP]]</var></th>
<td xml:space="preserve">Time allowed for termination</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[TIMESVC parameter|TIMESVC]]</var></th>
<td xml:space="preserve">CCA timing SVC #</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[TNDEV parameter|TNDEV]]</var></th>
<td xml:space="preserve">IODEV number for TNSERV threads [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[UBUFSZ parameter|UBUFSZ]]</var></th>
<td xml:space="preserve">Initial universal buffer size</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[UCPUSLIC parameter|UCPUSLIC]]</var></th>
<td xml:space="preserve">User CPU slice</td>
<td xml:space="preserve">User n parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[UDDCCC parameter|UDDCCC]]</var></th>
<td xml:space="preserve">USE DDNAME - cont char column</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[UDDLPP parameter|UDDLPP]]</var></th>
<td xml:space="preserve">USE DDNAME - lines per page</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[UDDRFM parameter|UDDRFM]]</var></th>
<td xml:space="preserve">USE DDNAME - record format</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[UFEOHASH parameter|UFEOHASH]]</var></th>
<td xml:space="preserve">Unlocked FEO hash table size</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[UFEOMISS parameter|UFEOMISS]]</var></th>
<td xml:space="preserve">Number of unlocked FEO misses</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[UIOSLIC parameter|UIOSLIC]]</var></th>
<td xml:space="preserve">User I/O slice</td>
<td xml:space="preserve">User n parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[ULTRACE parameter|ULTRACE]]</var></th>
<td xml:space="preserve">UL Trace statement flags [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[ULTRACEP parameter|ULTRACEP]]</var></th>
<td xml:space="preserve">Max UL Trace statement pages [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[UPCASMSG parameter|UPCASMSG]]</var></th>
<td xml:space="preserve">Upper casing of msgs/parm descriptions</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[UPDTID parameter|UPDTID]]</var></th>
<td xml:space="preserve">User current update id</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[UPDTLVL parameter|UPDTLVL]]</var></th>
<td xml:space="preserve">Default update FLS level</td>
<td xml:space="preserve">File manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[UPRIV parameter|UPRIV]]</var></th>
<td xml:space="preserve">User privilege bits</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[USERID parameter|USERID]]</var></th>
<td xml:space="preserve">User id</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[USLCMAX parameter|USLCMAX]]</var></th>
<td xml:space="preserve">User slice max to CSLICE</td>
<td xml:space="preserve">User n parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[USLCWAIT parameter|USLCWAIT]]</var></th>
<td xml:space="preserve">User slice wait time</td>
<td xml:space="preserve">User n parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[VDP parameter|VDP]]</var></th>
<td xml:space="preserve">Default %var decimal places</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[VERIFY parameter|VERIFY]]</var></th>
<td xml:space="preserve">Write verify</td>
<td xml:space="preserve">File manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[VERSION parameter|VERSION]]</var></th>
<td xml:space="preserve">Release of Model 204</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[VLEN parameter|VLEN]]</var></th>
<td xml:space="preserve">Default %var length</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[VMFSCHNL parameter|VMFSCHNL]]</var></th>
<td xml:space="preserve">VMCF display mode channel name</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[VMIFCHNL parameter|VMIFCHNL]]</var></th>
<td xml:space="preserve">VMCF IFAM channel name</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[VMIOCHNL parameter|VMIOCHNL]]</var></th>
<td xml:space="preserve">VMCF line mode channel name</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[VTAMNAME parameter|VTAMNAME]]</var></th>
<td xml:space="preserve">VTAM application name</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[VTAMNTO parameter|VTAMNTO]]</var></th>
<td xml:space="preserve">VTAM NTO application name</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[VTGCSSRV parameter|VTGCSSRV]]</var></th>
<td xml:space="preserve">GCS service VM for VTAM terminals</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[VTLAPSY parameter|VTLAPSY]]</var></th>
<td xml:space="preserve">Login APSY for VT75 terminals [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[VTYPE parameter|VTYPE]]</var></th>
<td xml:space="preserve">Default %var type</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[WAITSCAN parameter|WAITSCAN]]</var></th>
<td xml:space="preserve">Wait scan interval</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[WAITTIME parameter|WAITTIME]]</var></th>
<td xml:space="preserve">Wait time in seconds for a response</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[WEBAUDIT parameter|WEBAUDIT]]</var></th>
<td xml:space="preserve">Janus Web audit trail reduction flags [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[WEBOPT parameter|WEBOPT]]</var></th>
<td xml:space="preserve">Miscellaneous Janus Web options [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[XAUTOINC parameter|XAUTOINC]]</var></th>
<td xml:space="preserve">Number of pages for table X auto increase</td>
<td xml:space="preserve">File manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[XDMSSN parameter|XDMSSN]]</var></th>
<td xml:space="preserve">XDM subsystem</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[XHIGHPG parameter|XHIGHPG]]</var></th>
<td xml:space="preserve">Table X highest active page</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[XMEMOPT parameter|XMEMOPT]]</var></th>
<td xml:space="preserve">Cross-memory PC options</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[XMEMSVC parameter|XMEMSVC]]</var></th>
<td xml:space="preserve">Cross-memory SVC #</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[XQLEN parameter|XQLEN]]</var></th>
<td xml:space="preserve">Table X queue length</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[XRECPPG parameter|XRECPPG]]</var></th>
<td xml:space="preserve">Table X slots per page</td>
<td xml:space="preserve">CREATE command</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[XRESERVE parameter|XRESERVE]]</var></th>
<td xml:space="preserve">Table X reserve space per page</td>
<td xml:space="preserve">File manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[XREUSE parameter|XREUSE]]</var></th>
<td xml:space="preserve">Free space required to reuse table X page</td>
<td xml:space="preserve">File manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[XREUSED parameter|XREUSED]]</var></th>
<td xml:space="preserve">Extension slots reused in table X</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[XSIZE parameter|XSIZE]]</var></th>
<td xml:space="preserve">Pages in table X</td>
<td xml:space="preserve">CREATE command</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[ZPAGEOPT parameter|ZPAGEOPT]]</var></th>
<td xml:space="preserve">1 mb page areas</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[ZQMAX parameter|ZQMAX]]</var></th>
<td xml:space="preserve">Z queue max length</td>
<td xml:space="preserve">System manager</td>
</tr>
</table>
</div>

DSPOPT parameter

2015-01-27T19:41:31Z

DVRICKP:

{{Template:DSPOPT parameter subtitle}}
==Summary==
<dl>
<dt>Default value
<dd>X'01'
<dt>Parameter type
<dd>System
<dt>Where set
<dd>On User 0's parameter line
<dt>Related products
<dd>All
<dt>Introduced
<dd><var class="product">Model 204 V5.1</var>
</dl>

==Description==

The bits have the following meanings:
<table>
<tr class="head"><th>Settings</th><th>Meaning</th></tr>
<tr><th align="right"><var>X'01' </var></th>
<td>Allocate space for servers in memory in chunks of 4K pages, not as a permanent contiguous area. This allocation lets you move fewer 4K pages, keeping the virtual storage allocated for servers in memory less fragmented and possibly using fewer paging tables.

As of Model 204 version 7.5, this setting is the default. (Previously, X'00' was the default.)
</td></tr>

<tr><th align="right"><var>X'02'</var></th>
<td>Put servers in a hiperspace instead of a dataspace.

This setting is applicable only for real dataspaces for non-64-bit systems.
</td></tr>

<tr><th align="right"><var>X'04'</var></th>
<td>Use compression when swapping servers. (New in Model 204 version 7.6)

This setting is applicable only for 64-bit in-storage server swapping. When enabled, each table in the server is individually moved based on its usage.
In addition, if page fixing is specified for the server swapping memory, only the highwater mark of pages will be fixed.
</td></tr>

<tr><th align="right"><var>X'20' </var></th>
<td>Put [[Application_Subsystem_development|APSY]] precompiled procedures in hiperspace instead of a dataspace. Hiperspace pages can be in real or expanded storage.

This option is not valid on IBM z/VSE, and it requires that <var class="product">Model 204</var> be APF-authorized.
</td></tr>

<tr><th align="right"><var>X'40' </var></th>
<td>Put APSY precompiled procedures in cache hiperspace instead of a scrolling hiperspace.

Cache hiperspace pages can reside only in expanded storage, so they are sometimes called <code>ESO</code> (for Expanded Storage Only) hiperspaces. 

Also, cache hiperspace pages never result in operating system paging. Pages stolen by the operating system are simply discarded, and <var class="product">Model 204</var> is responsible for replacing the pages from the copy of the precompiled procedures in CCATEMP. 

This option is not valid on IBM z/VSE, and it requires that <var class="product">Model 204</var> be APF-authorized.
</td></tr>

<tr><th align="right"><var>X'80'</var></th>
<td>Keep all APSY saved pages in CCATEMP.

Set <var>DSPOPT</var> to X'80' only when <var>[[TEMPPAGE_parameter|TEMPPAGE]]</var> is 0, and then only in unusual circumstances.
</td></tr>
</table>

[[Category:System parameters]]
[[Category:Parameters]]

PAGEFIX parameter

2014-11-26T03:06:15Z

DVRICKP:

{{Template:PAGEFIX parameter subtitle}}
==Summary==
<dl>
<dt>Default value
<dd>X'00000000'
<dt>Parameter type
<dd>System
<dt>Where set
<dd>On User 0's parameter line
<dt>Related products
<dd>All
<dt>Introduced
<dd><var class="product">Model 204 V6.1</var> or earlier
</dl>
==Description==
The page fixing feature, indicative of which areas are to be fixed
PAGEFIX is not used under z/VM. It is used only under z/OS and z/VSE. 
Valid settings of PAGEFIX are (options can be summed):
<table>
<tr><th>Setting</th><th>Fixes...</th></tr>
<tr><th align="right"><var>X'02000000'</var></th><td>RESPAGE area.</td></tr>
<tr><th align="right"><var>X'01000000'</var></th><td>Server non-swappable (NSA) area.</td></tr>
<tr><th align="right"><var>X'00800000'</var></th><td>Open page buffers.</td></tr>
<tr><th align="right"><var>X'00400000'</var></th><td>APSYPAGE area.</td></tr>
<tr><th align="right"><var>X'00200000'</var></th><td>Checkpoint asynchronous buffers.</td></tr>
<tr><th align="right"><var>X'00100000'</var></th><td>DBIDs.</td></tr>
<tr><th align="right"><var>X'00080000'</var></th><td>Monitor real subtask work area.</td></tr>
<tr><th align="right"><var>X'00040000'</var></th><td>Record descriptions.</td></tr>
<tr><th align="right"><var>X'00020000'</var></th><td>Server areas.</td></tr>
<tr><th align="right"><var>X'00010000'</var></th><td>Record enqueuing table.</td></tr>
<tr><th align="right"><var>X'00008000'</var></th><td>Resource enqueuing table.</td></tr>
<tr><th align="right"><var>X'00004000'</var></th><td>User/file mode table.</td></tr>
<tr><th align="right"><var>X'00002000'</var></th><td>File save areas.</td></tr>
<tr><th align="right"><var>X'00001000'</var></th><td>DCB areas (DTF areas in VSE).</td></tr>
<tr><th align="right"><var>X'00000800'</var></th><td>LPM and DSL for CCATEMP.</td></tr>
<tr><th align="right"><var>X'00000400'</var></th><td>LPM and DSL for user files.</td></tr>
<tr><th align="right"><var>X'00000200'</var></th><td>Physical extent blocks for CCATEMP.</td></tr>
<tr><th align="right"><var>X'00000100'</var></th><td>Physical extent blocks for user files.</td></tr>
<tr><th align="right"><var>X'00000080'</var></th><td>Journal control blocks and buffers.</td></tr>
<tr><th align="right"><var>X'00000040'</var></th><td>Buffers.</td></tr>
<tr><th align="right"><var>X'00000020'</var></th><td>Buffer control blocks.</td></tr>
<tr><th align="right"><var>X'00000010'</var></th><td>Buffer hash field.</td></tr>
<tr><th align="right"><var>X'00000008'</var></th><td>STAT areas.</td></tr>
<tr><th align="right"><var>X'00000004'</var></th><td>SVIO work areas and Server swap pages.</td></tr>
<tr><th align="right"><var>X'00000002'</var></th><td>CWAIT work areas.</td></tr>
<tr><th align="right"><var>X'00000001'</var></th><td>KOMM. </td></tr>
</table>
====PC TIMER requires KOMM to be pagefixed====
Since the PC TIMER disables interrupts, but still needs to reference KOMM, the following error message informs you to pagefix KOMM. This prevents possible 0C4 and X'11' return codes or Page Translations Exceptions as they are commonly known.
M204.2447: KOMM MUST BE PAGE FIXED TO USE PCTIMER

[[Category:System parameters]]
[[Category:Parameters]]

PAGEFIX parameter

2014-11-25T21:09:25Z

DVRICKP:

{{Template:PAGEFIX parameter subtitle}}
==Summary==
<dl>
<dt>Default value
<dd>X'00000000'
<dt>Parameter type
<dd>System
<dt>Where set
<dd>On User 0's parameter line
<dt>Related products
<dd>All
<dt>Introduced
<dd><var class="product">Model 204 V6.1</var> or earlier
</dl>
==Description==
The page fixing feature, indicative of which areas are to be fixed
PAGEFIX is not used under z/VM. It is used only under z/OS and z/VSE. 
Valid settings of PAGEFIX are (options can be summed):
<table>
<tr><th>Setting</th><th>Fixes...</th></tr>
<tr><th align="right"><var>X'00080000'</var></th><td>Online monitor subtask work area.</td></tr>
<tr><th align="right"><var>X'00040000'</var></th><td>Record descriptions.</td></tr>
<tr><th align="right"><var>X'00020000'</var></th><td>Server areas.</td></tr>
<tr><th align="right"><var>X'00010000'</var></th><td>Record enqueuing table.</td></tr>
<tr><th align="right"><var>X'00008000'</var></th><td>Resource enqueuing table.</td></tr>
<tr><th align="right"><var>X'00004000'</var></th><td>User/file mode table.</td></tr>
<tr><th align="right"><var>X'00002000'</var></th><td>File save areas.</td></tr>
<tr><th align="right"><var>X'00001000'</var></th><td>DCB areas.</td></tr>
<tr><th align="right"><var>X'00000800'</var></th><td>LPM and DSL for CCATEMP.</td></tr>
<tr><th align="right"><var>X'00000400'</var></th><td>LPM and DSL for user files.</td></tr>
<tr><th align="right"><var>X'00000200'</var></th><td>Physical extent blocks for CCATEMP.</td></tr>
<tr><th align="right"><var>X'00000100'</var></th><td>Physical extent blocks for user files.</td></tr>
<tr><th align="right"><var>X'00000080'</var></th><td>Journal control blocks and buffers.</td></tr>
<tr><th align="right"><var>X'00000040'</var></th><td>Buffers.</td></tr>
<tr><th align="right"><var>X'00000020'</var></th><td>Buffer control blocks.</td></tr>
<tr><th align="right"><var>X'00000010'</var></th><td>Buffer hash field.</td></tr>
<tr><th align="right"><var>X'00000008'</var></th><td>STAT areas.</td></tr>
<tr><th align="right"><var>X'00000004'</var></th><td> SVIO work areas and Server swap pages.</td></tr>
<tr><th align="right"><var>X'00000002'</var></th><td>CWAIT work areas.</td></tr>
<tr><th align="right"><var>X'00000001'</var></th><td>KOMM. </td></tr>
</table>
====PC TIMER requires KOMM to be pagefixed====
Since the PC TIMER disables interrupts, but still needs to reference KOMM, the following error message informs you to pagefix KOMM. This prevents possible 0C4 and X'11' return codes or Page Translations Exceptions as they are commonly known.
M204.2447: KOMM MUST BE PAGE FIXED TO USE PCTIMER

[[Category:System parameters]]
[[Category:Parameters]]

DSPOPT parameter

2014-11-25T21:07:31Z

DVRICKP:

{{Template:DSPOPT parameter subtitle}}
==Summary==
<dl>
<dt>Default value
<dd>X'01'
<dt>Parameter type
<dd>System
<dt>Where set
<dd>On User 0's parameter line
<dt>Related products
<dd>All
<dt>Introduced
<dd><var class="product">Model 204 V5.1</var>
</dl>

==Description==
The bits have the following meanings:
<table>
<tr><th>Settings</th><th>Meaning</th></tr>
<tr><th align="right"><var>X'01' </var></th><td>Allocate space for servers in memory in chunks of 4K pages, not as a permanent contiguous area. This allocation lets you move fewer 4K pages, keeping the virtual storage allocated for servers in memory less fragmented and possibly using fewer paging tables. As of Model 204 version 7.5, this setting is the default. (Previously X'00' was the default.)
</td></tr>
<tr><th align="right"><var>X'02'</var></th><td>Put servers in a hiperspace instead of a dataspace.
This setting is applicable only for real dataspaces for non-64-bit systems.
</td></tr>
<tr><th align="right"><var>X'04'</var></th><td>Use compression when swapping servers.
This setting is applicable only for 64-bit in-storage server swapping. When enabled, each table in the server is individually moved based on its usage.
In addition, if page fixing is specified for the server swapping memory, only the high water mark of pages will be fixed.
</td></tr>
<tr><th align="right"><var>X'20' </var></th><td>Put <var>[[Application_Subsystem_development|APSY]]</var> precompiled procedures in hiperspace instead of a dataspace. Hiperspace pages can be in either real or expanded storage.
This option is not valid on IBM z/VSE and requires that <var class="product">Model 204</var> be APF-authorized.
</td></tr>
<tr><th align="right"><var>X'40' </var></th><td>
Put APSY precompiled procedures in cache hiperspace instead of a scrolling hiperspace. 
Cache hiperspace pages can reside in only expanded storage, so they are sometimes called ESO (for Expanded Storage Only) hiperspaces.
Also, cache hiperspace pages never result in operating system paging. Pages stolen by the operating system are simply discarded and <var class="product">Model 204</var> is responsible for replacing the pages from the copy of the precompiled procedures in CCATEMP. 
This option is not valid on IBM z/VSE and requires that <var class="product">Model 204</var> be APF-authorized.
</td></tr>
<tr><th align="right"><var>X'80'</var></th><td>
Keep all APSY saved pages in CCATEMP.
Set DSPOPT to X'80' only when <var>[[TEMPPAGE_parameter|TEMPPAGE]]</var>=0, and then only in unusual circumstances.
</td></tr>
</table>
[[Category:System parameters]]
[[Category:Parameters]]

SERVGA parameter

2014-11-25T21:00:13Z

DVRICKP:

{{Template:SERVGA parameter subtitle}}
==Summary==
<dl>
<dt>Default value
<dd>0
<dt>Parameter type
<dd>System
<dt>Where set
<dd>On User 0's parameter line
<dt>Related products
<dd>All
<dt>Introduced
<dd><var class="product">Model 204 V7.5</var>
</dl>
==Description==
The <var>SERVGA</var> parameter controls which server tables are allocated in the ATB-swappable-server area.
Each server table to be allocated in that area is controlled by a bit in <var>SERVGA</var>; if the bit is on, the corresponding server table is allocated in the ATB-swappable-server area.

The bits are:
<table class="thJustBold">
<tr><th>Bit</th><th>Server table placed above the bar</th></tr>
<tr><td><code>X'02000000'</code></td><td>FTBL</td></tr>
<tr><td><code>X'00800000'</code></td><td>GTBL — requires version 7.5 or later of <var class="product">Model 204</var>.
<tr><td><code>X'00004000'</code></td><td>NTBL — requires version 7.5 or later of <var class="product">Model 204</var>.
<tr><td><code>X'00002000'</code></td><td>QTBL — requires version 7.5 or later of <var class="product">Model 204</var>.
<tr><td><code>X'01000000'</code></td><td>XTBL — requires version 7.6 or later of <var class="product">Model 204</var>.
<tr><td><code>X'00400000'</code></td><td>ITBL — requires version 7.6 or later of <var class="product">Model 204</var>.
<tr><td><code>X'00100000'</code></td><td>FSCB — requires version 7.6 or later of <var class="product">Model 204</var>.
<tr><td><code>X'00080000'</code></td><td>STBL — requires version 7.6 or later of <var class="product">Model 204</var>.
<tr><td><code>X'00040000'</code></td><td>VTBL — requires version 7.6 or later of <var class="product">Model 204</var>.
<tr><td><code>X'00020000'</code></td><td>TTBL — requires version 7.6 or later of <var class="product">Model 204</var>.
<tr><td><code>X'00010000'</code></td><td>HTBFRS — requires version 7.6 or later of <var class="product">Model 204</var>.
</table>
<var>[[SERVGSZ parameter|SERVGSZ]]</var> is the amount of space in bytes required for the swappable above-the-bar server tables per server. The total amount of storage allocated for swappable above-the-bar server areas equals <var>SERVGSZ</var> rounded to 4K and multiplied by [[NSERVS parameter|NSERVS]].
When sizing <var>SERVGSZ</var>, it should accomodate the largest swappable above-the-bar table sizes that might be needed.

The above mentioned tables can alternatively be placed above-the-bar in a non-swappable area. This can be indicated with the [[SERVNSA parameter|SERVNSA]] and [[SERVNSSZ parameter|SERVNSSZ]] parameters. The bits corresponding to the tables should not be set in both SERVNSA and SERVGA — if they are, an error message will be issued and the online will fail to come up.

{{Template:SERVGA/SERVGSZ common}}

[[Category:System parameters]]
[[Category:Parameters]]

SERVNSA parameter

2014-09-25T21:07:37Z

DVRICKP:

{{Template:SERVNSA parameter subtitle}}
==Summary==
<dl>
<dt>Default value
<dd>0
<dt>Parameter type
<dd>System
<dt>Where set
<dd>On User 0's parameter line
<dt>Related products
<dd>All
<dt>Introduced
<dd><var class="product">Model 204 V7.4</var>
</dl>

==Description==
The <var>SERVNSA</var> parameter, along with the <var>SERVNSSZ</var> parameter, control non-swappable server areas that are placed above the 2G bar.
Each server table to be allocated above the bar is controlled by a bit in <var>SERVNSA</var>; if the bit is on, the corresponding server table is allocated above the bar.

The bits are:
<table class="thJustBold">
<tr><th>Bit</th><th>Server table placed above the bar</th></tr>

<tr><td><code>X'02000000'</code></td><td>FTBL</td></tr>
<tr><td><code>X'00800000'</code></td><td>GTBL — requires version 7.5 or later of <var class="product">Model 204</var>.
<tr><td><code>X'00004000'</code></td><td>NTBL — requires version 7.5 or later of <var class="product">Model 204</var>.
<tr><td><code>X'00002000'</code></td><td>QTBL — requires version 7.5 or later of <var class="product">Model 204</var>.
<tr><td><code>X'01000000'</code></td><td>XTBL — requires version 7.6 or later of <var class="product">Model 204</var>.
<tr><td><code>X'10000000'</code></td><td>RTBL — requires version 7.6 or later of <var class="product">Model 204</var>.
<tr><td><code>X'08000000'</code></td><td>KTBL — requires version 7.6 or later of <var class="product">Model 204</var>.
<tr><td><code>X'00400000'</code></td><td>ITBL — requires version 7.6 or later of <var class="product">Model 204</var>.
<tr><td><code>X'00100000'</code></td><td>FSCB — requires version 7.6 or later of <var class="product">Model 204</var>.
<tr><td><code>X'00080000'</code></td><td>STBL — requires version 7.6 or later of <var class="product">Model 204</var>.
<tr><td><code>X'00040000'</code></td><td>VTBL — requires version 7.6 or later of <var class="product">Model 204</var>.
<tr><td><code>X'00020000'</code></td><td>TTBL — requires version 7.6 or later of <var class="product">Model 204</var>.
<tr><td><code>X'00010000'</code></td><td>HTBFRS — requires version 7.6 or later of <var class="product">Model 204</var>.

</td></tr>
</table>
<var>[[SERVNSSZ parameter|SERVNSSZ]]</var> (server non-swappable size) is the amount of space in bytes required for the above-the-bar server tables per user. The total amount of storage allocated for non-swappable server areas equals <var>SERVNSSZ</var> rounded to 4 K and multiplied by <var>NUSERS</var>.
When sizing <var>SERVNSSZ</var>, it should accomodate the largest non-swappable table sizes that might be needed.
The maximum non-swappable setting for version 7.4 is x'02000000'.
The maximum non-swappable setting for version 7.5 is x'02806000'.
The maximum non-swappable setting for version 7.6 is x'1BDF6000'.

In Model 204 7.5 and later, QTBL and NTBL can alternatively be placed above-the-bar in a swappable area. This can be indicated with the [[SERVGA parameter|SERVGA]] and [[SERVGSZ parameter|SERVGSZ]] parameters. The bits corresponding to NTBL and QTBL should not be set in both SERVNSA and SERVGA – if they are, an error message will be issued and the online will fail to come up.

For more information about server tables above the bar, see the
<var class="book">[http://docs.rocketsoftware.com/nxt/gateway.dll/RKBnew556/model%20204/v7.4/m204_v7r4_system_manager.pdf Rocket Model 204 System Manager's Guide]</var>.

[[Category:System parameters]]
[[Category:Parameters]]

MAXOND parameter

2014-08-02T01:34:00Z

DVRICKP: /* Description */

{{Template:MAXOND parameter subtitle}}

==Summary==
<dl>
<dt>Default value
<dd>8
<dt>Parameter type
<dd>User
<dt>Where set
<dd>By any user
<dt>Related products
<dd>All
<dt>Introduced
<dd><var class="product">Model 204 V7.6</var>
</dl>

==Description==
Defines the number of times an ON unit may be entered before the evaluation is terminated.
Once this recursion number is exceeded, [[M204.0316]] is issued.

[[Category:User parameters]]
[[Category:Parameters]]

Template:List of M204 parameters

2014-08-02T01:29:49Z

DVRICKP:

<div class="showVisit">
<table>
<tr class="head">
<th>Parameter name</th>
<th>Description</th>
<th>Set/reset type</th>
</tr>
<tr>
<th xml:space="preserve"><var>[[ACCOUNT parameter|ACCOUNT]]</var></th>
<td xml:space="preserve">Billing account</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[ACCTIM parameter|ACCTIM]]</var></th>
<td xml:space="preserve">Time before partial stat lines</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[ACTRDS parameter|ACTRDS]]</var></th>
<td xml:space="preserve">Active RSA subtasks [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[ADDLVL parameter|ADDLVL]]</var></th>
<td xml:space="preserve">Default add FLS level</td>
<td xml:space="preserve">File manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[AGEINCR parameter|AGEINCR]]</var></th>
<td xml:space="preserve">Aging priority increment</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[AGEINTVL parameter|AGEINTVL]]</var></th>
<td xml:space="preserve">Aging interval</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[AGESCAN parameter|AGESCAN]]</var></th>
<td xml:space="preserve">Age scan interval</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[AGESLICE parameter|AGESLICE]]</var></th>
<td xml:space="preserve">Aging slice increment</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[ALOCPRIV parameter|ALOCPRIV]]</var></th>
<td xml:space="preserve">Allocate privilege requirement</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[ALTIODEV parameter|ALTIODEV]]</var></th>
<td xml:space="preserve">Alternate user zero IODEV</td>
<td xml:space="preserve">EXEC PARM field</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[AMPSUBS parameter|AMPSUBS]]</var></th>
<td xml:space="preserve">Number of active offload subtasks</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[AMPSUBZ parameter|AMPSUBZ]]</var></th>
<td xml:space="preserve">Number of active zIIP eligible subtasks</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[APSYPAGE parameter|APSYPAGE]]</var></th>
<td xml:space="preserve">Number of APSY pages in hiperspace</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[APSYSEC parameter|APSYSEC]]</var></th>
<td xml:space="preserve">Sirius APSY security flags [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[APSYXMM parameter|APSYXMM]]</var></th>
<td xml:space="preserve">Expanded storage megabytes for saved APSY compilations [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[ARETRIES parameter|ARETRIES]]</var></th>
<td xml:space="preserve">Table A page retries</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[ASIZE parameter|ASIZE]]</var></th>
<td xml:space="preserve">Pages in table A</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[ASTRPPG parameter|ASTRPPG]]</var></th>
<td xml:space="preserve">Table A strings per page</td>
<td xml:space="preserve">CREATE command</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[ATRPG parameter|ATRPG]]</var></th>
<td xml:space="preserve">Table A attribute pages</td>
<td xml:space="preserve">CREATE command</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[AUDITOPT parameter|AUDITOPT]]</var></th>
<td xml:space="preserve">Audit options</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[AUTOGCN parameter|AUTOGCN]]</var></th>
<td xml:space="preserve">Garbage collection threshold [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[AUTOSYS parameter|AUTOSYS]]</var></th>
<td xml:space="preserve">Automatic subsystem</td>
<td xml:space="preserve">User n parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[B24EXCWT parameter|B24EXCWT]]</var></th>
<td xml:space="preserve">BATCH204 wait time(ms) between M204.0583 msgs</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[B24SHRWT parameter|B24SHRWT]]</var></th>
<td xml:space="preserve">BATCH204 wait time(ms) between M204.0582 msgs</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[BASECENT parameter|BASECENT]]</var></th>
<td xml:space="preserve">CENTSPLT base century</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[BAUTOINC parameter|BAUTOINC]]</var></th>
<td xml:space="preserve">Number of pages for table B auto increase</td>
<td xml:space="preserve">File manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[BAUTOTYP parameter|BAUTOTYP]]</var></th>
<td xml:space="preserve">Table B auto increase options [[#Obsolete parameters|(obs)]]</td>
<td xml:space="preserve">File manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[BEXTOVFL parameter|BEXTOVFL]]</var></th>
<td xml:space="preserve">Table B extra overflow areas</td>
<td xml:space="preserve">CREATE command</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[BHIGHPG parameter|BHIGHPG]]</var></th>
<td xml:space="preserve">Table B highest active page</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[BIGOBJL parameter|BIGOBJL]]</var></th>
<td xml:space="preserve">Size of object list considered big [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[BLOWPG parameter|BLOWPG]]</var></th>
<td xml:space="preserve">Table B lowest active page</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[BPGPMSTR parameter|BPGPMSTR]]</var></th>
<td xml:space="preserve">Table B pages/master area</td>
<td xml:space="preserve">CREATE command</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[BPGPOVFL parameter|BPGPOVFL]]</var></th>
<td xml:space="preserve">Table B pages/overflow area</td>
<td xml:space="preserve">CREATE command</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[BQLEN parameter|BQLEN]]</var></th>
<td xml:space="preserve">Table B queue length</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[BRECPPG parameter|BRECPPG]]</var></th>
<td xml:space="preserve">Table B records per page</td>
<td xml:space="preserve">CREATE command</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[BRESERVE parameter|BRESERVE]]</var></th>
<td xml:space="preserve">Table B reserve space</td>
<td xml:space="preserve">File manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[BREUSE parameter|BREUSE]]</var></th>
<td xml:space="preserve">Free space required to reuse table B page</td>
<td xml:space="preserve">File manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[BREUSED parameter|BREUSED]]</var></th>
<td xml:space="preserve">Records added reusing record numbers</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[BRLIMSZ parameter|BRLIMSZ]]</var></th>
<td xml:space="preserve">Table B record limit size</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[BSIZE parameter|BSIZE]]</var></th>
<td xml:space="preserve">Pages in table B</td>
<td xml:space="preserve">CREATE command</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[CACHE parameter|CACHE]]</var></th>
<td xml:space="preserve">Cache fast write</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[CASE parameter|CASE]]</var></th>
<td xml:space="preserve">Text input case</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[CAUDIT parameter|CAUDIT]]</var></th>
<td xml:space="preserve">Card audit bits</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[CDMAXP2X parameter|CDMAXP2X]]</var></th>
<td xml:space="preserve">Maximum constraints pages power of 2</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[CDMINP2X parameter|CDMINP2X]]</var></th>
<td xml:space="preserve">Minimum constraints pages power of 2</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[CECHO parameter|CECHO]]</var></th>
<td xml:space="preserve">Card echo</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[CEECHO parameter|CEECHO]]</var></th>
<td xml:space="preserve">Card edit echo</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[CENTSPAN parameter|CENTSPAN]]</var></th>
<td xml:space="preserve">CENTSPAN for date $functions [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[CENTSPLT parameter|CENTSPLT]]</var></th>
<td xml:space="preserve">Century year split</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[CFRJRNL parameter|CFRJRNL]]</var></th>
<td xml:space="preserve">CFR+rec locking stats to CCAJRNL</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[CFRLOOK parameter|CFRLOOK]]</var></th>
<td xml:space="preserve">CFR+rec locking stats to monitor</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[CFRWPCT parameter|CFRWPCT]]</var></th>
<td xml:space="preserve">Max nonswappable CFR waiters</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[CHKPRIV parameter|CHKPRIV]]</var></th>
<td xml:space="preserve">Checkpoint privilege requirement</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[CMSVERSN parameter|CMSVERSN]]</var></th>
<td xml:space="preserve">Version of the CMS interface</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[COMEND parameter|COMEND]]</var></th>
<td xml:space="preserve">End of comment block</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[COMMAND parameter|COMMAND]]</var></th>
<td xml:space="preserve">Model204 command table</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[COMMLOG parameter|COMMLOG]]</var></th>
<td xml:space="preserve">$Command login flags [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[COMPERR parameter|COMPERR]]</var></th>
<td xml:space="preserve">Compiler error reporting options</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[COMPOPT parameter|COMPOPT]]</var></th>
<td xml:space="preserve">Compiler options [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[COMSTART parameter|COMSTART]]</var></th>
<td xml:space="preserve">Start of comment block</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[CP3270 parameter|CP3270]]</var></th>
<td xml:space="preserve">3270 code page ID [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[CPMAX parameter|CPMAX]]</var></th>
<td xml:space="preserve">Max # of checkpoints</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[CPQZACTN parameter|CPQZACTN]]</var></th>
<td xml:space="preserve">Checkpoint extended quiesce timeout action</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[CPQZSECS parameter|CPQZSECS]]</var></th>
<td xml:space="preserve">Number of seconds before CPQZACTN</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[CPSORT parameter|CPSORT]]</var></th>
<td xml:space="preserve">IFAM2 CHKP signon tries</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[CPTIME parameter|CPTIME]]</var></th>
<td xml:space="preserve">Minutes between checkpoints</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[CPTO parameter|CPTO]]</var></th>
<td xml:space="preserve">Checkpoint timeout in seconds</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[CPTQ parameter|CPTQ]]</var></th>
<td xml:space="preserve">Batch quiesce timeout in seconds</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[CPTS parameter|CPTS]]</var></th>
<td xml:space="preserve">Sub-transaction timeout in seconds</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[CPTYPE parameter|CPTYPE]]</var></th>
<td xml:space="preserve">Checkpoint type</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[CPUSLICE parameter|CPUSLICE]]</var></th>
<td xml:space="preserve">CPU slice - CPU</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[CRETRIES parameter|CRETRIES]]</var></th>
<td xml:space="preserve">Table C page retries</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[CRFSCHNL parameter|CRFSCHNL]]</var></th>
<td xml:space="preserve">Full screen CRAM name</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[CRIOCHNL parameter|CRIOCHNL]]</var></th>
<td xml:space="preserve">User language CRAM channel name</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[CS3270 parameter|CS3270]]</var></th>
<td xml:space="preserve">3270 character set ID [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[CSECHO parameter|CSECHO]]</var></th>
<td xml:space="preserve">Card substitution echo</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[CSIPID parameter|CSIPID]]</var></th>
<td xml:space="preserve">TCP/IP system ID [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[CSIZE parameter|CSIZE]]</var></th>
<td xml:space="preserve">Pages in table C</td>
<td xml:space="preserve">CREATE command</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[CURALVL parameter|CURALVL]]</var></th>
<td xml:space="preserve">Add FLS level for file/group</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[CURCLASS parameter|CURCLASS]]</var></th>
<td xml:space="preserve">User priv class (proc) for file/group</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[CURFILE parameter|CURFILE]]</var></th>
<td xml:space="preserve">Current file</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[CURLOC parameter|CURLOC]]</var></th>
<td xml:space="preserve">CURFILE location if remote</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[CURPRIV parameter|CURPRIV]]</var></th>
<td xml:space="preserve">Privs for current file/group</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[CURREC parameter|CURREC]]</var></th>
<td xml:space="preserve">Current record number</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[CURREP31 parameter|CURREP31]]</var></th>
<td xml:space="preserve">Current 31-bit storage for report writers (megabytes) [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[CURREP64 parameter|CURREP64]]</var></th>
<td xml:space="preserve">Current 64-bit storage for report writers (megabytes) [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[CURRLVL parameter|CURRLVL]]</var></th>
<td xml:space="preserve">Read FLS level for file/group</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[CURSLVL parameter|CURSLVL]]</var></th>
<td xml:space="preserve">Select FLS level for file/group</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[CURULVL parameter|CURULVL]]</var></th>
<td xml:space="preserve">Update FLS level for file/group</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[CUSTOM parameter|CUSTOM]]</var></th>
<td xml:space="preserve">Enable special modifications to Model 204</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[D$ONEOF parameter|D$ONEOF]]</var></th>
<td xml:space="preserve">$OneOf item delimiter</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[DACTIVE parameter|DACTIVE]]</var></th>
<td xml:space="preserve">List page active</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[DAUTOINC parameter|DAUTOINC]]</var></th>
<td xml:space="preserve">Number of pages for table D auto increase</td>
<td xml:space="preserve">File manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[DB2PLAN parameter|DB2PLAN]]</var></th>
<td xml:space="preserve">DB2 plan name</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[DB2POINT parameter|DB2POINT]]</var></th>
<td xml:space="preserve">Exec DB2 decimal point</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[DB2QUOTE parameter|DB2QUOTE]]</var></th>
<td xml:space="preserve">Exec DB2 quote</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[DB2THRD parameter|DB2THRD]]</var></th>
<td xml:space="preserve">Number of DB2 threads</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[DEBUGMAX parameter|DEBUGMAX]]</var></th>
<td xml:space="preserve">Maximum debug worker threads [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[DEBUGPAG parameter|DEBUGPAG]]</var></th>
<td xml:space="preserve">Maximum debug CCATEMP pages [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[DEBUGUL parameter|DEBUGUL]]</var></th>
<td xml:space="preserve">User language debug options</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[DEFCENT parameter|DEFCENT]]</var></th>
<td xml:space="preserve">Default century</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[DEFINCP parameter|DEFINCP]]</var></th>
<td xml:space="preserve">Default automatic table size pct increase</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[DHIGHPG parameter|DHIGHPG]]</var></th>
<td xml:space="preserve">Table D highest page used</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[DKUPDTWT parameter|DKUPDTWT]]</var></th>
<td xml:space="preserve"># seconds after file's last update before file is updated on disk</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[DPGSRES parameter|DPGSRES]]</var></th>
<td xml:space="preserve">Table D pages reserved</td>
<td xml:space="preserve">File manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[DPGSUSED parameter|DPGSUSED]]</var></th>
<td xml:space="preserve">Table D pages in use</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[DRESERVE parameter|DRESERVE]]</var></th>
<td xml:space="preserve">List page reserve space</td>
<td xml:space="preserve">File manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[DSIZE parameter|DSIZE]]</var></th>
<td xml:space="preserve">Pages in table D</td>
<td xml:space="preserve">CREATE command</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[DSPOPT parameter|DSPOPT]]</var></th>
<td xml:space="preserve">Data space options</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[DTS parameter|DTS]]</var></th>
<td xml:space="preserve">Date time stamp updates (1=automatic, 0=bypassed)</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[DTSFN parameter|DTSFN]]</var></th>
<td xml:space="preserve">Date time stamp field name</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[DUFILES parameter|DUFILES]]</var></th>
<td xml:space="preserve">Files open in deferred update mode</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[DUMPAOPT parameter|DUMPAOPT]]</var></th>
<td xml:space="preserve">MP altpdl dump options</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[DUMPMOPT parameter|DUMPMOPT]]</var></th>
<td xml:space="preserve">MP maintask dump options</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[DUMPOPTS parameter|DUMPOPTS]]</var></th>
<td xml:space="preserve">Fast Backup/Restore flags [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[DUMPSOPT parameter|DUMPSOPT]]</var></th>
<td xml:space="preserve">MP subtask dump options</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[DUMPTMAX parameter|DUMPTMAX]]</var></th>
<td xml:space="preserve">Maximum CCATEMP usage for DUMP [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[DUMPTMIN parameter|DUMPTMIN]]</var></th>
<td xml:space="preserve">Minimum free CCATEMP for DUMP [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[DUPTERM parameter|DUPTERM]]</var></th>
<td xml:space="preserve">Number of duplicate terminals</td>
<td xml:space="preserve">User n parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[DVADD parameter|DVADD]]</var></th>
<td xml:space="preserve">Device address</td>
<td xml:space="preserve">User n parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[ECISUBS parameter|ECISUBS]]</var></th>
<td xml:space="preserve">ECF initial subtasks</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[ECMODS parameter|ECMODS]]</var></th>
<td xml:space="preserve">ECF maximum modules loaded</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[ECMSUBS parameter|ECMSUBS]]</var></th>
<td xml:space="preserve">ECF maximum subtasks</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[ECNAMES parameter|ECNAMES]]</var></th>
<td xml:space="preserve">ECF maximum call names</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[ECPRIV parameter|ECPRIV]]</var></th>
<td xml:space="preserve">ECF privileges</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[ECPSIZE parameter|ECPSIZE]]</var></th>
<td xml:space="preserve">ECF initial parameter area allocation</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[ECWAIT parameter|ECWAIT]]</var></th>
<td xml:space="preserve">ECF maximum wait for external call</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[EDIT parameter|EDIT]]</var></th>
<td xml:space="preserve">Edit control</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[EHIGHPG parameter|EHIGHPG]]</var></th>
<td xml:space="preserve">Table E highest page used</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[ENQRETRY parameter|ENQRETRY]]</var></th>
<td xml:space="preserve">Retry record locking</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[ENTTAB parameter|ENTTAB]]</var></th>
<td xml:space="preserve">Default entity translation table [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[EOJPW parameter|EOJPW]]</var></th>
<td xml:space="preserve">EOJ password</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[EOVFLADD parameter|EOVFLADD]]</var></th>
<td xml:space="preserve">Records added to extra overflow areas</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[EOVFLDEL parameter|EOVFLDEL]]</var></th>
<td xml:space="preserve">Records deleted from ext ovflow areas</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[EPGSUSED parameter|EPGSUSED]]</var></th>
<td xml:space="preserve">Table E pages in use</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[ERASE parameter|ERASE]]</var></th>
<td xml:space="preserve">Erase-character symbol</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[ERCNT parameter|ERCNT]]</var></th>
<td xml:space="preserve">Error count [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[ERMX parameter|ERMX]]</var></th>
<td xml:space="preserve">Maximum number of errors</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[ERRLEN parameter|ERRLEN]]</var></th>
<td xml:space="preserve">Length of errors saved</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[ERRMSGL parameter|ERRMSGL]]</var></th>
<td xml:space="preserve">Saved error message length</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[ERRSAVE parameter|ERRSAVE]]</var></th>
<td xml:space="preserve">No of errors saved</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[ESIZE parameter|ESIZE]]</var></th>
<td xml:space="preserve">Pages in table E</td>
<td xml:space="preserve">CREATE command</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[EXCPVR parameter|EXCPVR]]</var></th>
<td xml:space="preserve">EXCPVR appendage id</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[EXTNADD parameter|EXTNADD]]</var></th>
<td xml:space="preserve">Extension records added</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[EXTNDEL parameter|EXTNDEL]]</var></th>
<td xml:space="preserve">Extension records deleted</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[FACTDEB parameter|FACTDEB]]</var></th>
<td xml:space="preserve">SirFact debugging flags [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[FASTGLOB parameter|FASTGLOB]]</var></th>
<td xml:space="preserve">Fast global processing</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[FICREATE parameter|FICREATE]]</var></th>
<td xml:space="preserve">Create format</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[FIFLAGS parameter|FIFLAGS]]</var></th>
<td xml:space="preserve">File status switches</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[FIFORMAT parameter|FIFORMAT]]</var></th>
<td xml:space="preserve">Current FPL format</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[FILEMODL parameter|FILEMODL]]</var></th>
<td xml:space="preserve">File model enforced</td>
<td xml:space="preserve">File manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[FILEORG parameter|FILEORG]]</var></th>
<td xml:space="preserve">File organization</td>
<td xml:space="preserve">CREATE command</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[FISTAT parameter|FISTAT]]</var></th>
<td xml:space="preserve">Current status of file</td>
<td xml:space="preserve">File manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[FITRANS parameter|FITRANS]]</var></th>
<td xml:space="preserve">Transform format</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[FIXSIZE parameter|FIXSIZE]]</var></th>
<td xml:space="preserve">Fixed server size requirement</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[FLUSH parameter|FLUSH]]</var></th>
<td xml:space="preserve">Erase-line symbol</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[FNVMASK parameter|FNVMASK]]</var></th>
<td xml:space="preserve">Filename version mask [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[FOPT parameter|FOPT]]</var></th>
<td xml:space="preserve">File options</td>
<td xml:space="preserve">File manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[FRCVOPT parameter|FRCVOPT]]</var></th>
<td xml:space="preserve">File recovery options</td>
<td xml:space="preserve">File manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[FREESIZE parameter|FREESIZE]]</var></th>
<td xml:space="preserve">Pages in free space</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[FRELPREV parameter|FRELPREV]]</var></th>
<td xml:space="preserve">Fast/Reload previous request number [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[FSATTN parameter|FSATTN]]</var></th>
<td xml:space="preserve">Full screen attention key</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[FSOUTPUT parameter|FSOUTPUT]]</var></th>
<td xml:space="preserve">Full screen color and highlighting</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[FSTRMOPT parameter|FSTRMOPT]]</var></th>
<td xml:space="preserve">Full screen terminal options</td>
<td xml:space="preserve">User n parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[FUNCOPTS parameter|FUNCOPTS]]</var></th>
<td xml:space="preserve">Sirius function flags [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[FUNMAXT parameter|FUNMAXT]]</var></th>
<td xml:space="preserve">Default Fast/Unload request timeout (seconds) [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[FUNPARM parameter|FUNPARM]]</var></th>
<td xml:space="preserve">Fast/Unload system flags [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[FUNPGM parameter|FUNPGM]]</var></th>
<td xml:space="preserve">Name of Fast/Unload load module [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[FUNPRMU parameter|FUNPRMU]]</var></th>
<td xml:space="preserve">Fast/Unload user flags [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[FUNTSKN parameter|FUNTSKN]]</var></th>
<td xml:space="preserve">Maximum Fast/Unload tasks [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[FVFPG parameter|FVFPG]]</var></th>
<td xml:space="preserve">Table A few valued field pages</td>
<td xml:space="preserve">CREATE command</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[GCSTATS parameter|GCSTATS]]</var></th>
<td xml:space="preserve">Garbage collector statistics [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[GTBLHASH parameter|GTBLHASH]]</var></th>
<td xml:space="preserve">Number of hashed GTBL buckets</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[GTBLPCT parameter|GTBLPCT]]</var></th>
<td xml:space="preserve">Initial GTBL percentage to allocate for plain globals</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[HASHCELL parameter|HASHCELL]]</var></th>
<td xml:space="preserve">Hash cells per buffer</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[HASHKEY parameter|HASHKEY]]</var></th>
<td xml:space="preserve">Name of file's hash key field</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[HASHSPIL parameter|HASHSPIL]]</var></th>
<td xml:space="preserve">Hash file spill chain length</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[HDRCTL parameter|HDRCTL]]</var></th>
<td xml:space="preserve">Header control</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[HGHREP31 parameter|HGHREP31]]</var></th>
<td xml:space="preserve">High 31-bit storage for report writers (megabytes) [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[HGHREP64 parameter|HGHREP64]]</var></th>
<td xml:space="preserve">High 64-bit storage for report writers (megabytes) [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[HIGHSORT parameter|HIGHSORT]]</var></th>
<td xml:space="preserve">Record with highest sort key</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[HTLEN parameter|HTLEN]]</var></th>
<td xml:space="preserve">Max length of each header or trailer</td>
<td xml:space="preserve">User n parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[IFAMBS parameter|IFAMBS]]</var></th>
<td xml:space="preserve">IFAM2 buffer size</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[IFAMCHNL parameter|IFAMCHNL]]</var></th>
<td xml:space="preserve">IFAM2 CRAM channel name</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[INCCC parameter|INCCC]]</var></th>
<td xml:space="preserve">Input cont char column</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[INCSLICE parameter|INCSLICE]]</var></th>
<td xml:space="preserve">Include slicing limit</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[INMRL parameter|INMRL]]</var></th>
<td xml:space="preserve">Max input record length</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[INPUT parameter|INPUT]]</var></th>
<td xml:space="preserve">Input device name</td>
<td xml:space="preserve">User n parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[IODEV parameter|IODEV]]</var></th>
<td xml:space="preserve">Type of I/O device</td>
<td xml:space="preserve">User n parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[IOSLICE parameter|IOSLICE]]</var></th>
<td xml:space="preserve">CPU slice - IO</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[IPADDR parameter|IPADDR]]</var></th>
<td xml:space="preserve">IP address</td>
<td xml:space="preserve">User n parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[IVERIFY parameter|IVERIFY]]</var></th>
<td xml:space="preserve">Write verify - initialization</td>
<td xml:space="preserve">CREATE command</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[JANDEBM parameter|JANDEBM]]</var></th>
<td xml:space="preserve">Janus Web debugging message flags [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[JESID parameter|JESID]]</var></th>
<td xml:space="preserve">JES job id</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[JOBNM parameter|JOBNM]]</var></th>
<td xml:space="preserve">Job name</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[JOBSTEP parameter|JOBSTEP]]</var></th>
<td xml:space="preserve">Job step name</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[KOMMOPT parameter|KOMMOPT]]</var></th>
<td xml:space="preserve">KOMM options [[#Obsolete parameters|(obs)]]</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[LANGFILE parameter|LANGFILE]]</var></th>
<td xml:space="preserve">Language name for file</td>
<td xml:space="preserve">File manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[LANGUSER parameter|LANGUSER]]</var></th>
<td xml:space="preserve">Language name for thread</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[LAUDIT parameter|LAUDIT]]</var></th>
<td xml:space="preserve">Line audit bits</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[LAUDPROC parameter|LAUDPROC]]</var></th>
<td xml:space="preserve">Length of audit procedure names</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[LCPDLST parameter|LCPDLST]]</var></th>
<td xml:space="preserve">Length of C push-down list</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[LDKBMW parameter|LDKBMW]]</var></th>
<td xml:space="preserve"># of pages in DKBM stat window</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[LDKBMWND parameter|LDKBMWND]]</var></th>
<td xml:space="preserve"># of pages in DKBM LRU window</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[LDKBMWNG parameter|LDKBMWNG]]</var></th>
<td xml:space="preserve"># of pages in above-the-bar DKBM LRU window</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[LECHO parameter|LECHO]]</var></th>
<td xml:space="preserve">Line echo</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[LEECHO parameter|LEECHO]]</var></th>
<td xml:space="preserve">Line edit echo</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[LENQTBL parameter|LENQTBL]]</var></th>
<td xml:space="preserve"># of resource locking table entries per user</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[LFSCB parameter|LFSCB]]</var></th>
<td xml:space="preserve">Length of full screen buffer</td>
<td xml:space="preserve">User n parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[LFTBL parameter|LFTBL]]</var></th>
<td xml:space="preserve">Length of FTBL</td>
<td xml:space="preserve">User n parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[LGTBL parameter|LGTBL]]</var></th>
<td xml:space="preserve">Length of global variable table</td>
<td xml:space="preserve">User n parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[LHEAP parameter|LHEAP]]</var></th>
<td xml:space="preserve">Length of heap</td>
<td xml:space="preserve">User n parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[LIBUFF parameter|LIBUFF]]</var></th>
<td xml:space="preserve">Length of input buffer</td>
<td xml:space="preserve">User n parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[LINEND parameter|LINEND]]</var></th>
<td xml:space="preserve">Logical line end symbol</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[LITBL parameter|LITBL]]</var></th>
<td xml:space="preserve">Length of ITBL</td>
<td xml:space="preserve">User n parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[LNTBL parameter|LNTBL]]</var></th>
<td xml:space="preserve">Length of NTBL</td>
<td xml:space="preserve">User n parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[LOBUFF parameter|LOBUFF]]</var></th>
<td xml:space="preserve">Length of output buffer</td>
<td xml:space="preserve">User n parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[LOCATION parameter|LOCATION]]</var></th>
<td xml:space="preserve">D204 location</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[LOGADD parameter|LOGADD]]</var></th>
<td xml:space="preserve">Room for password additions</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[LOGFAIL parameter|LOGFAIL]]</var></th>
<td xml:space="preserve">Action to be taken if logtry exceeded</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[LOGONENQ parameter|LOGONENQ]]</var></th>
<td xml:space="preserve">Userid logon enqueue</td>
<td xml:space="preserve">User n parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[LOGTRY parameter|LOGTRY]]</var></th>
<td xml:space="preserve">Maximum number of login attempts allowed per thread</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[LOUTPB parameter|LOUTPB]]</var></th>
<td xml:space="preserve">Length of output page buffer</td>
<td xml:space="preserve">User n parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[LPDLST parameter|LPDLST]]</var></th>
<td xml:space="preserve">Length of user push down list</td>
<td xml:space="preserve">User n parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[LPFORCE parameter|LPFORCE]]</var></th>
<td xml:space="preserve">Force procedure audit</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[LQTBL parameter|LQTBL]]</var></th>
<td xml:space="preserve">Length of QTBL</td>
<td xml:space="preserve">User n parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[LRECLTBL parameter|LRECLTBL]]</var></th>
<td xml:space="preserve">Length of record locking table (deprecated - use LRETBL)</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[LRESLTBL parameter|LRESLTBL]]</var></th>
<td xml:space="preserve"># of resource locking table entries per user (deprecated - use LENQTBL)</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[LRETBL parameter|LRETBL]]</var></th>
<td xml:space="preserve">Length of record locking table</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[LRUPG parameter|LRUPG]]</var></th>
<td xml:space="preserve">LRU pages remembered</td>
<td xml:space="preserve">EXEC PARM field</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[LRUTIM parameter|LRUTIM]]</var></th>
<td xml:space="preserve">Time to flush obsolete LRU references</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[LSECHO parameter|LSECHO]]</var></th>
<td xml:space="preserve">Line substitution echo</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[LSERVER parameter|LSERVER]]</var></th>
<td xml:space="preserve">Server size requirement</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[LSERVPD parameter|LSERVPD]]</var></th>
<td xml:space="preserve">Length of scheduler pdl [[#Obsolete parameters|(obs)]]</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[LSTBL parameter|LSTBL]]</var></th>
<td xml:space="preserve">Length of STBL</td>
<td xml:space="preserve">User n parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[LSTRLOB parameter|LSTRLOB]]</var></th>
<td xml:space="preserve">Treat LOBs as Longstrings [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[LTTBL parameter|LTTBL]]</var></th>
<td xml:space="preserve">Length of TTBL</td>
<td xml:space="preserve">User n parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[LVLTRC parameter|LVLTRC]]</var></th>
<td xml:space="preserve">End of input stream message</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[LVTBL parameter|LVTBL]]</var></th>
<td xml:space="preserve">Length of VTBL</td>
<td xml:space="preserve">User n parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[LXTBL parameter|LXTBL]]</var></th>
<td xml:space="preserve">Length of XTBL</td>
<td xml:space="preserve">User n parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[MARKSAN parameter|MARKSAN]]</var></th>
<td xml:space="preserve">Maximum items in a MarksArray [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[MAXAUSER parameter|MAXAUSER]]</var></th>
<td xml:space="preserve">Maximum active interactive users [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[MAXAUSEW parameter|MAXAUSEW]]</var></th>
<td xml:space="preserve">Minimum seconds between MAXAUSER warnings [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[MAXBG parameter|MAXBG]]</var></th>
<td xml:space="preserve">Maximum background/independent Daemons [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[MAXBUF parameter|MAXBUF]]</var></th>
<td xml:space="preserve">Maximum number of buffers</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[MAXDAEM parameter|MAXDAEM]]</var></th>
<td xml:space="preserve">Maximum Daemon objects per user [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[MAXHDR parameter|MAXHDR]]</var></th>
<td xml:space="preserve">Max number of headers</td>
<td xml:space="preserve">User n parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[MAXINCBP parameter|MAXINCBP]]</var></th>
<td xml:space="preserve">Maximum dynamic table B size pct increase</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[MAXINCL parameter|MAXINCL]]</var></th>
<td xml:space="preserve">Max Include level</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[MAXOBUF parameter|MAXOBUF]]</var></th>
<td xml:space="preserve">Maximum open buffers per user</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[MAXOND parameter|MAXOND]]</var></th>
<td xml:space="preserve">Maximum ON unit recursion depth</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[MAXRDS parameter|MAXRDS]]</var></th>
<td xml:space="preserve">Maximum RSA subtasks [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[MAXREP31 parameter|MAXREP31]]</var></th>
<td xml:space="preserve">Maximum 31-bit storage for report writers (megabytes) [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[MAXREP64 parameter|MAXREP64]]</var></th>
<td xml:space="preserve">Maximum 64-bit storage for report writers (megabytes) [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[MAXSIMIO parameter|MAXSIMIO]]</var></th>
<td xml:space="preserve">Max simultaneous disk I/Os</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[MAXSPINS parameter|MAXSPINS]]</var></th>
<td xml:space="preserve">Max number of spins for mplock</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[MAXTIME parameter|MAXTIME]]</var></th>
<td xml:space="preserve">Maximum run time</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[MAXTRL parameter|MAXTRL]]</var></th>
<td xml:space="preserve">Max number of trailers</td>
<td xml:space="preserve">User n parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[MAXUD parameter|MAXUD]]</var></th>
<td xml:space="preserve">Long update unit durations (ms)</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[MBSCAN parameter|MBSCAN]]</var></th>
<td xml:space="preserve">Max table B records scan</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[MCNCT parameter|MCNCT]]</var></th>
<td xml:space="preserve">Max connect time</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[MCPU parameter|MCPU]]</var></th>
<td xml:space="preserve">Max CPU time</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[MDKRD parameter|MDKRD]]</var></th>
<td xml:space="preserve">Max disk reads</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[MDKWR parameter|MDKWR]]</var></th>
<td xml:space="preserve">Max disk writes</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[MINBUF parameter|MINBUF]]</var></th>
<td xml:space="preserve">Minimum number of buffers</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[MISCOPT parameter|MISCOPT]]</var></th>
<td xml:space="preserve">Miscellaneous system options [[#Obsolete parameters|(obs)]]</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[MODEL parameter|MODEL]]</var></th>
<td xml:space="preserve">Terminal model</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[MODPROT parameter|MODPROT]]</var></th>
<td xml:space="preserve">204 load module protection flags [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[MODTIM parameter|MODTIM]]</var></th>
<td xml:space="preserve">Julian date-time of Model 204 module</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[MONPARM parameter|MONPARM]]</var></th>
<td xml:space="preserve">SirMon system flags [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[MOUT parameter|MOUT]]</var></th>
<td xml:space="preserve">Max output lines</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[MPOPTS parameter|MPOPTS]]</var></th>
<td xml:space="preserve">MP user language options</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[MPSYS parameter|MPSYS]]</var></th>
<td xml:space="preserve">MP/204 system flags</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[MQBUFSZ parameter|MQBUFSZ]]</var></th>
<td xml:space="preserve">Initial universal buffer size</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[MQDEQMAN parameter|MQDEQMAN]]</var></th>
<td xml:space="preserve">MQ/204 default queue manager</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[MQINTASK parameter|MQINTASK]]</var></th>
<td xml:space="preserve">Initial MQ/204 subtasks</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[MQMXTASK parameter|MQMXTASK]]</var></th>
<td xml:space="preserve">Maximum MQ/204 subtasks</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[MQSUBREL parameter|MQSUBREL]]</var></th>
<td xml:space="preserve">Release MQ subtask (1-release, 0 - retain)</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[MQWAIT parameter|MQWAIT]]</var></th>
<td xml:space="preserve">Maximum wait for MQ/204 subtask</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[MSGCTL parameter|MSGCTL]]</var></th>
<td xml:space="preserve">Message printing options</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[MSRES parameter|MSRES]]</var></th>
<td xml:space="preserve">Maximum SREs per file in RETBL</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[MSTRADD parameter|MSTRADD]]</var></th>
<td xml:space="preserve">Records added to master areas</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[MSTRDEL parameter|MSTRDEL]]</var></th>
<td xml:space="preserve">Records deleted from master areas</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[MUDD parameter|MUDD]]</var></th>
<td xml:space="preserve">Max UDD lines</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[MVFPG parameter|MVFPG]]</var></th>
<td xml:space="preserve">Table A many valued field pages</td>
<td xml:space="preserve">CREATE command</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[MXIJLOG parameter|MXIJLOG]]</var></th>
<td xml:space="preserve">Number of 4k pages for JLOG statistics</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[NBKPG parameter|NBKPG]]</var></th>
<td xml:space="preserve">Number of backpages kept</td>
<td xml:space="preserve">User n parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[NCMPBUF parameter|NCMPBUF]]</var></th>
<td xml:space="preserve">Number of compression buffers [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[NDCBS parameter|NDCBS]]</var></th>
<td xml:space="preserve">Number of file DCBs</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[NDIR parameter|NDIR]]</var></th>
<td xml:space="preserve">Number of file directory entries</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[NECBS parameter|NECBS]]</var></th>
<td xml:space="preserve">Number of ECBs</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[NFILES parameter|NFILES]]</var></th>
<td xml:space="preserve">Number of file areas</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[NGROUP parameter|NGROUP]]</var></th>
<td xml:space="preserve">Max # of open groups</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[NJBUFF parameter|NJBUFF]]</var></th>
<td xml:space="preserve">Number of journal buffers</td>
<td xml:space="preserve">EXEC PARM field</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[NLBUFF parameter|NLBUFF]]</var></th>
<td xml:space="preserve">Number of CCAJLOG buffers</td>
<td xml:space="preserve">EXEC PARM field</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[NLRUQ parameter|NLRUQ]]</var></th>
<td xml:space="preserve"># of DKBM LRU queues</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[NLRUQG parameter|NLRUQG]]</var></th>
<td xml:space="preserve"># of above-the-bar DKBM LRU queues</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[NMPSUBS parameter|NMPSUBS]]</var></th>
<td xml:space="preserve">Number of offload subtasks</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[NMPSUBZ parameter|NMPSUBZ]]</var></th>
<td xml:space="preserve">Number of zIIP eligible subtasks</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[NOECBS parameter|NOECBS]]</var></th>
<td xml:space="preserve">Number of ECBs</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[NORQS parameter|NORQS]]</var></th>
<td xml:space="preserve">Number of requests preserved</td>
<td xml:space="preserve">User n parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[NOTERM parameter|NOTERM]]</var></th>
<td xml:space="preserve">Number of terminals on line</td>
<td xml:space="preserve">User n parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[NOTHREAD parameter|NOTHREAD]]</var></th>
<td xml:space="preserve">Number of inbound threads</td>
<td xml:space="preserve">User n parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[NOUTBUF parameter|NOUTBUF]]</var></th>
<td xml:space="preserve"># of full screen output buffers</td>
<td xml:space="preserve">User n parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[NRMTFILE parameter|NRMTFILE]]</var></th>
<td xml:space="preserve">Number of remote file areas</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[NRMTLOCS parameter|NRMTLOCS]]</var></th>
<td xml:space="preserve">Number of remote locations</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[NSERVS parameter|NSERVS]]</var></th>
<td xml:space="preserve">Number of servers</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[NSUBTKS parameter|NSUBTKS]]</var></th>
<td xml:space="preserve">Max number of pseudo-subtasks</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[NUMBUF parameter|NUMBUF]]</var></th>
<td xml:space="preserve">Number of buffers</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[NUMBUFG parameter|NUMBUFG]]</var></th>
<td xml:space="preserve">Number of above-the-bar buffers</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[NUSERS parameter|NUSERS]]</var></th>
<td xml:space="preserve">Number of users</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[OBJSTAT parameter|OBJSTAT]]</var></th>
<td xml:space="preserve">Sirius object statistic flags [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[OBJSTMIN parameter|OBJSTMIN]]</var></th>
<td xml:space="preserve">Sirius object statistic minimum [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[OIDEPTH parameter|OIDEPTH]]</var></th>
<td xml:space="preserve">No. levels of ordered index nodes</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[OILEAVES parameter|OILEAVES]]</var></th>
<td xml:space="preserve">No. ordered index nodes: leaves</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[OILPACT parameter|OILPACT]]</var></th>
<td xml:space="preserve">Ordered index list page active</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[OINBYTES parameter|OINBYTES]]</var></th>
<td xml:space="preserve">No. ordered index bytes</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[OINENTRY parameter|OINENTRY]]</var></th>
<td xml:space="preserve">No. ordered index entries</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[OINODES parameter|OINODES]]</var></th>
<td xml:space="preserve">No. ordered index nodes: all levels</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[OPENCTL parameter|OPENCTL]]</var></th>
<td xml:space="preserve">Open control flags</td>
<td xml:space="preserve">File manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[OPSYS parameter|OPSYS]]</var></th>
<td xml:space="preserve">Operating system</td>
<td xml:space="preserve">EXEC PARM field</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[OUTCCC parameter|OUTCCC]]</var></th>
<td xml:space="preserve">Output cont char column</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[OUTLPP parameter|OUTLPP]]</var></th>
<td xml:space="preserve">Output lines per page</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[OUTMRL parameter|OUTMRL]]</var></th>
<td xml:space="preserve">Max output record length</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[OUTPNO parameter|OUTPNO]]</var></th>
<td xml:space="preserve">Output page number</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[OUTPUT parameter|OUTPUT]]</var></th>
<td xml:space="preserve">Output device name</td>
<td xml:space="preserve">User n parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[OVFLADD parameter|OVFLADD]]</var></th>
<td xml:space="preserve">Records added to overflow areas</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[OVFLDEL parameter|OVFLDEL]]</var></th>
<td xml:space="preserve">Records deleted from overflow areas</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[PAGE parameter|PAGE]]</var></th>
<td xml:space="preserve">Backpage command character</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[PAGEFIX parameter|PAGEFIX]]</var></th>
<td xml:space="preserve">Page-fix parameter string</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[PAGESZ parameter|PAGESZ]]</var></th>
<td xml:space="preserve">File page size</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[PDSIZE parameter|PDSIZE]]</var></th>
<td xml:space="preserve">Pages per procedure dictionary section</td>
<td xml:space="preserve">CREATE command</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[PDSTRPPG parameter|PDSTRPPG]]</var></th>
<td xml:space="preserve">Names/procedure dictionary page limit</td>
<td xml:space="preserve">CREATE command</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[PERFOPT parameter|PERFOPT]]</var></th>
<td xml:space="preserve">Sirius Performance Enhancement flags [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[PERFOPT2 parameter|PERFOPT2]]</var></th>
<td xml:space="preserve">Sirius Performance Enhancement flags V2 [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[PGSEP parameter|PGSEP]]</var></th>
<td xml:space="preserve">Lines between pages</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[POLLNO parameter|POLLNO]]</var></th>
<td xml:space="preserve">Relative polling number</td>
<td xml:space="preserve">User n parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[PQOOPT parameter|PQOOPT]]</var></th>
<td xml:space="preserve">Parallel query options</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[PQOSYS parameter|PQOSYS]]</var></th>
<td xml:space="preserve">Parallel query system options</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[PRCLDEF parameter|PRCLDEF]]</var></th>
<td xml:space="preserve">Default user class for procedures</td>
<td xml:space="preserve">File manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[PRIOMAX parameter|PRIOMAX]]</var></th>
<td xml:space="preserve">Max age priority</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[PRIORITY parameter|PRIORITY]]</var></th>
<td xml:space="preserve">User priority</td>
<td xml:space="preserve">User n parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[PRIVDEF parameter|PRIVDEF]]</var></th>
<td xml:space="preserve">Default file privileges</td>
<td xml:space="preserve">File manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[PROMPT parameter|PROMPT]]</var></th>
<td xml:space="preserve">Prompt control</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[PUPDTH parameter|PUPDTH]]</var></th>
<td xml:space="preserve">Procedure update hash value [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[PWDEXP parameter|PWDEXP]]</var></th>
<td xml:space="preserve">Password expiration days</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[PWDPURGE parameter|PWDPURGE]]</var></th>
<td xml:space="preserve">Password purge days</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[PWDWARN parameter|PWDWARN]]</var></th>
<td xml:space="preserve">Password warning days</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[RCVOPT parameter|RCVOPT]]</var></th>
<td xml:space="preserve">Recovery options</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[READLVL parameter|READLVL]]</var></th>
<td xml:space="preserve">Default read FLS level</td>
<td xml:space="preserve">File manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[RECLOCKO parameter|RECLOCKO]]</var></th>
<td xml:space="preserve">Record locking options [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[RECRDOPT parameter|RECRDOPT]]</var></th>
<td xml:space="preserve">Record options</td>
<td xml:space="preserve">CREATE command</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[RECSCTY parameter|RECSCTY]]</var></th>
<td xml:space="preserve">Name of file's record security field</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[RECSECID parameter|RECSECID]]</var></th>
<td xml:space="preserve">Record security id</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[RESCURR parameter|RESCURR]]</var></th>
<td xml:space="preserve">Current storage used for resident requests</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[RESHIGH parameter|RESHIGH]]</var></th>
<td xml:space="preserve">HWM for storage used for resident requests</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[RESLTHR parameter|RESLTHR]]</var></th>
<td xml:space="preserve">APSY load threshold for making request resident</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[RESPAGE parameter|RESPAGE]]</var></th>
<td xml:space="preserve">Number of resident N/QTBL ATB pages</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[RESSIZE parameter|RESSIZE]]</var></th>
<td xml:space="preserve">Maximum storage to be used for resident requests</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[RESTARTU parameter|RESTARTU]]</var></th>
<td xml:space="preserve">Restart utility flags [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">EXEC PARM field</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[RESTHRSH parameter|RESTHRSH]]</var></th>
<td xml:space="preserve">Server write threshold for making request resident</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[RETRVBUF parameter|RETRVBUF]]</var></th>
<td xml:space="preserve">Size of retrieve key buffer [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[RETRVKEY parameter|RETRVKEY]]</var></th>
<td xml:space="preserve">Retrieve PF key</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[RETRVOPT parameter|RETRVOPT]]</var></th>
<td xml:space="preserve">Retrieve key options [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[RPTCNT parameter|RPTCNT]]</var></th>
<td xml:space="preserve">Samples between performance stat lines</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SCANPARM parameter|SCANPARM]]</var></th>
<td xml:space="preserve">SirScan system flags [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SCANTIME parameter|SCANTIME]]</var></th>
<td xml:space="preserve">Maximum seconds between SirScan info messages [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SCHDOFL parameter|SCHDOFL]]</var></th>
<td xml:space="preserve">Threshold for activating subtasks</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SCHDOFLZ parameter|SCHDOFLZ]]</var></th>
<td xml:space="preserve">Threshold for activating zIIP subtasks</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SCHDOPT parameter|SCHDOPT]]</var></th>
<td xml:space="preserve">Scheduler options</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SCHDOPT1 parameter|SCHDOPT1]]</var></th>
<td xml:space="preserve">Scheduler options</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SCRNSTBL parameter|SCRNSTBL]]</var></th>
<td xml:space="preserve">STBL size for Screen objects [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SDAEMDEL parameter|SDAEMDEL]]</var></th>
<td xml:space="preserve">SDaemon swap delay (MS) [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SDAEMDEV parameter|SDAEMDEV]]</var></th>
<td xml:space="preserve">IODEV number for SDaemons [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SDEBGUIP parameter|SDEBGUIP]]</var></th>
<td xml:space="preserve">Sirius debug default GUI port number [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SDEBWRKP parameter|SDEBWRKP]]</var></th>
<td xml:space="preserve">Sirius debug default worker port number [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SDMOPT parameter|SDMOPT]]</var></th>
<td xml:space="preserve">SDaemon options [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SECPLIST parameter|SECPLIST]]</var></th>
<td xml:space="preserve">Security parameter-list name for default user</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SECTRLOG parameter|SECTRLOG]]</var></th>
<td xml:space="preserve">Security trusted login environment</td>
<td xml:space="preserve">User n parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SECTY parameter|SECTY]]</var></th>
<td xml:space="preserve">Low-level security in effect</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SELLVL parameter|SELLVL]]</var></th>
<td xml:space="preserve">Default select FLS level</td>
<td xml:space="preserve">File manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SEQOPT parameter|SEQOPT]]</var></th>
<td xml:space="preserve">Sequential processing options</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SEQPDL parameter|SEQPDL]]</var></th>
<td xml:space="preserve">Minimum PDL available for sequencer</td>
<td xml:space="preserve">User n parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SERVACTV parameter|SERVACTV]]</var></th>
<td xml:space="preserve">Current size of this server</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SERVGA parameter|SERVGA]]</var></th>
<td xml:space="preserve">Above the bar server areas</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SERVGSZ parameter|SERVGSZ]]</var></th>
<td xml:space="preserve">Above the bar server size</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SERVNSA parameter|SERVNSA]]</var></th>
<td xml:space="preserve">Non swappable server areas</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SERVNSSZ parameter|SERVNSSZ]]</var></th>
<td xml:space="preserve">Non swappable server area size</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SERVSIZE parameter|SERVSIZE]]</var></th>
<td xml:space="preserve">Maximum size of this server</td>
<td xml:space="preserve">User n parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SESDEBUG parameter|SESDEBUG]]</var></th>
<td xml:space="preserve">Session debugging flags [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SESDEFOW parameter|SESDEFOW]]</var></th>
<td xml:space="preserve">Default open wait time in seconds [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SESDEFTO parameter|SESDEFTO]]</var></th>
<td xml:space="preserve">Default session timeout seconds [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SESMAXTO parameter|SESMAXTO]]</var></th>
<td xml:space="preserve">Maximum session timeout in seconds [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SESNPRV parameter|SESNPRV]]</var></th>
<td xml:space="preserve">Maximum number of private sessions [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SESNPUB parameter|SESNPUB]]</var></th>
<td xml:space="preserve">Maximum number of public sessions [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SESOPT parameter|SESOPT]]</var></th>
<td xml:space="preserve">Session options [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SESUMAX parameter|SESUMAX]]</var></th>
<td xml:space="preserve">Maximum private sessions per user [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SIOSLICE parameter|SIOSLICE]]</var></th>
<td xml:space="preserve">Server slice - IO</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SIRAPSYF parameter|SIRAPSYF]]</var></th>
<td xml:space="preserve">Sirius APSY flags [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SIRCOMP parameter|SIRCOMP]]</var></th>
<td xml:space="preserve">Sirius compilation flags [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SIREDIT parameter|SIREDIT]]</var></th>
<td xml:space="preserve">Sirius EDIT flags [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SIRFACT parameter|SIRFACT]]</var></th>
<td xml:space="preserve">SirFact flags [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SIRFUNC parameter|SIRFUNC]]</var></th>
<td xml:space="preserve">Function table options [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">EXEC PARM field</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SIRMSG parameter|SIRMSG]]</var></th>
<td xml:space="preserve">Upper casing of msgs/parm descriptions (deprecated - use UPCASMSG) [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SIRPDLHW parameter|SIRPDLHW]]</var></th>
<td xml:space="preserve">Accurate PDL HWM calculation [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SIRPRMPT parameter|SIRPRMPT]]</var></th>
<td xml:space="preserve">Sirius full screen prompt [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SIRTERM parameter|SIRTERM]]</var></th>
<td xml:space="preserve">Sirius terminal options [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SIRTUNE parameter|SIRTUNE]]</var></th>
<td xml:space="preserve">SirTune flags [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">EXEC PARM field</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SLICEMAX parameter|SLICEMAX]]</var></th>
<td xml:space="preserve">Max age slice</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SMFLORN parameter|SMFLORN]]</var></th>
<td xml:space="preserve">SMF logout rec #</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SMFSLRN parameter|SMFSLRN]]</var></th>
<td xml:space="preserve">SMF "since last" rec #</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SMFSVC parameter|SMFSVC]]</var></th>
<td xml:space="preserve">SMF SVC # [[#Obsolete parameters|(obs)]]</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SMPLTIM parameter|SMPLTIM]]</var></th>
<td xml:space="preserve">Performance sample time</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SMTPCADD parameter|SMTPCADD]]</var></th>
<td xml:space="preserve">Default SMTP client address</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SMTPCPRT parameter|SMTPCPRT]]</var></th>
<td xml:space="preserve">Default SMTP client port</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SMTPSADD parameter|SMTPSADD]]</var></th>
<td xml:space="preserve">Default SMTP server address</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SMTPSPRT parameter|SMTPSPRT]]</var></th>
<td xml:space="preserve">Default SMTP server port</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SNAPCLS parameter|SNAPCLS]]</var></th>
<td xml:space="preserve">Class for spun-off snaps</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SNAPCTL parameter|SNAPCTL]]</var></th>
<td xml:space="preserve">Snap/dump options</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SNAPDST parameter|SNAPDST]]</var></th>
<td xml:space="preserve">Destination for spun-off snaps</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SNAPFAIL parameter|SNAPFAIL]]</var></th>
<td xml:space="preserve">Number of CCASNAP failures</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SNAPFLIM parameter|SNAPFLIM]]</var></th>
<td xml:space="preserve">0 or max snap failures allowed</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SNAPID parameter|SNAPID]]</var></th>
<td xml:space="preserve">Number of snaps so far</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SNAPLIM parameter|SNAPLIM]]</var></th>
<td xml:space="preserve">0 or max number of snaps allowed</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SNAPLIMD parameter|SNAPLIMD]]</var></th>
<td xml:space="preserve">0 or max number of occurrences of any particular snap [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SNAPPDLX parameter|SNAPPDLX]]</var></th>
<td xml:space="preserve">Snap pdl extension option</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SOCKMAX parameter|SOCKMAX]]</var></th>
<td xml:space="preserve">Maximum sockets per user [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SORTKEY parameter|SORTKEY]]</var></th>
<td xml:space="preserve">Name of file's sort key field</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SPANSIZE parameter|SPANSIZE]]</var></th>
<td xml:space="preserve">SPANSIZE for date $functions [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SPCORE parameter|SPCORE]]</var></th>
<td xml:space="preserve">Spare core reserved</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SPILLADD parameter|SPILLADD]]</var></th>
<td xml:space="preserve">Spill indicator - adds</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SPILLDEL parameter|SPILLDEL]]</var></th>
<td xml:space="preserve">Spill indicator - deletes</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SQLBSCAN parameter|SQLBSCAN]]</var></th>
<td xml:space="preserve">Max RSQL read/writes</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SQLBUFSZ parameter|SQLBUFSZ]]</var></th>
<td xml:space="preserve">Remote SQL server buffer size</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SQLCNVER parameter|SQLCNVER]]</var></th>
<td xml:space="preserve">SQL fetch option</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SQLFILE parameter|SQLFILE]]</var></th>
<td xml:space="preserve">SQL generated file names</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SQLIQBSZ parameter|SQLIQBSZ]]</var></th>
<td xml:space="preserve">SQL intrnl query buff size</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SQLLPLIM parameter|SQLLPLIM]]</var></th>
<td xml:space="preserve">SQL read/writes per slice</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SRSDEFTO parameter|SRSDEFTO]]</var></th>
<td xml:space="preserve">Default saved record set timeout [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SRSMAX parameter|SRSMAX]]</var></th>
<td xml:space="preserve">Maximum number of saved record sets [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SRSMAXTO parameter|SRSMAXTO]]</var></th>
<td xml:space="preserve">Maximum saved record set timeout [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SRSMAXUS parameter|SRSMAXUS]]</var></th>
<td xml:space="preserve">Maximum saved record sets per user [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SRSPARM parameter|SRSPARM]]</var></th>
<td xml:space="preserve">Saved record set parameters [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SRVSLICE parameter|SRVSLICE]]</var></th>
<td xml:space="preserve">Server slice - CPU</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[STEPNM parameter|STEPNM]]</var></th>
<td xml:space="preserve">Step name</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[STORCUR parameter|STORCUR]]</var></th>
<td xml:space="preserve">Current dynamic storage allocation</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[STORCURG parameter|STORCURG]]</var></th>
<td xml:space="preserve">Current mbytes ATB storage allocated</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[STORINIT parameter|STORINIT]]</var></th>
<td xml:space="preserve">Storage acquired during initialization</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[STORMAX parameter|STORMAX]]</var></th>
<td xml:space="preserve">Dynamic storage high water mark</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[STORMAXG parameter|STORMAXG]]</var></th>
<td xml:space="preserve">HWM mbytes ATB storage allocated</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[STORMXZP parameter|STORMXZP]]</var></th>
<td xml:space="preserve">HWM mbytes storage allocated with 1 MB pages</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[STORZPAG parameter|STORZPAG]]</var></th>
<td xml:space="preserve">Current mbytes storage allocated with 1 MB pages</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SUB parameter|SUB]]</var></th>
<td xml:space="preserve">Substitution control</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SVIOMAXT parameter|SVIOMAXT]]</var></th>
<td xml:space="preserve">Server tracks per user</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SYSDATE parameter|SYSDATE]]</var></th>
<td xml:space="preserve">System initial date</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SYSDINFO parameter|SYSDINFO]]</var></th>
<td xml:space="preserve">System date message</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SYSID parameter|SYSID]]</var></th>
<td xml:space="preserve">SMF system identification</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SYSOPT parameter|SYSOPT]]</var></th>
<td xml:space="preserve">System options</td>
<td xml:space="preserve">EXEC PARM field</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SYSOPT2 parameter|SYSOPT2]]</var></th>
<td xml:space="preserve">System options</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SYSTIME parameter|SYSTIME]]</var></th>
<td xml:space="preserve">System initial time</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[TABSP parameter|TABSP]]</var></th>
<td xml:space="preserve">Tab spacing</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[TCPNAME parameter|TCPNAME]]</var></th>
<td xml:space="preserve">TCP/IP service machine name</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[TCPOPTS parameter|TCPOPTS]]</var></th>
<td xml:space="preserve">TCP options</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[TCPSERV parameter|TCPSERV]]</var></th>
<td xml:space="preserve">Name of TCP/IP server address space [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[TCPSUBSY parameter|TCPSUBSY]]</var></th>
<td xml:space="preserve">Subsystem name for TCP/IP server [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[TCPTYPE parameter|TCPTYPE]]</var></th>
<td xml:space="preserve">Type of TCP/IP server address space [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[TEMPBOP parameter|TEMPBOP]]</var></th>
<td xml:space="preserve">Number of CCATEMP pages reserved for backout data</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[TEMPCUR parameter|TEMPCUR]]</var></th>
<td xml:space="preserve">CCATEMP pages currently in use</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[TEMPCURE parameter|TEMPCURE]]</var></th>
<td xml:space="preserve">CCATEMP pages currently in use (expansion area)</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[TEMPCURS parameter|TEMPCURS]]</var></th>
<td xml:space="preserve">CCATEMP pages currently in use (small model page pool)</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[TEMPHIE parameter|TEMPHIE]]</var></th>
<td xml:space="preserve">CCATEMP HWM pages used (expansion area)</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[TEMPHIS parameter|TEMPHIS]]</var></th>
<td xml:space="preserve">CCATEMP HWM pages used (small model page pool)</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[TEMPMAX parameter|TEMPMAX]]</var></th>
<td xml:space="preserve">CCATEMP highest number of pages used</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[TEMPPAGE parameter|TEMPPAGE]]</var></th>
<td xml:space="preserve">Number of CCATEMP pages in storage</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[TEMPSIZE parameter|TEMPSIZE]]</var></th>
<td xml:space="preserve">CCATEMP size in pages</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[TERMBUF parameter|TERMBUF]]</var></th>
<td xml:space="preserve"># of full screen input buffers</td>
<td xml:space="preserve">User n parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[TERMID parameter|TERMID]]</var></th>
<td xml:space="preserve">Terminal id</td>
<td xml:space="preserve">User n parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[TERMOPT parameter|TERMOPT]]</var></th>
<td xml:space="preserve">Terminal options</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[TIMELEF parameter|TIMELEF]]</var></th>
<td xml:space="preserve">Time left before end of run</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[TIMEOUT parameter|TIMEOUT]]</var></th>
<td xml:space="preserve">Inactive thread timeout in seconds</td>
<td xml:space="preserve">User n parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[TIMESTOP parameter|TIMESTOP]]</var></th>
<td xml:space="preserve">Time allowed for termination</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[TIMESVC parameter|TIMESVC]]</var></th>
<td xml:space="preserve">CCA timing SVC #</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[TNDEV parameter|TNDEV]]</var></th>
<td xml:space="preserve">IODEV number for TNSERV threads [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[UBUFSZ parameter|UBUFSZ]]</var></th>
<td xml:space="preserve">Initial universal buffer size</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[UCPUSLIC parameter|UCPUSLIC]]</var></th>
<td xml:space="preserve">User CPU slice</td>
<td xml:space="preserve">User n parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[UDDCCC parameter|UDDCCC]]</var></th>
<td xml:space="preserve">USE DDNAME - cont char column</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[UDDLPP parameter|UDDLPP]]</var></th>
<td xml:space="preserve">USE DDNAME - lines per page</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[UDDRFM parameter|UDDRFM]]</var></th>
<td xml:space="preserve">USE DDNAME - record format</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[UFEOHASH parameter|UFEOHASH]]</var></th>
<td xml:space="preserve">Unlocked FEO hash table size</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[UFEOMISS parameter|UFEOMISS]]</var></th>
<td xml:space="preserve">Number of unlocked FEO misses</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[UIOSLIC parameter|UIOSLIC]]</var></th>
<td xml:space="preserve">User I/O slice</td>
<td xml:space="preserve">User n parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[ULTRACE parameter|ULTRACE]]</var></th>
<td xml:space="preserve">UL Trace statement flags [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[ULTRACEP parameter|ULTRACEP]]</var></th>
<td xml:space="preserve">Max UL Trace statement pages [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[UPCASMSG parameter|UPCASMSG]]</var></th>
<td xml:space="preserve">Upper casing of msgs/parm descriptions</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[UPDTID parameter|UPDTID]]</var></th>
<td xml:space="preserve">User current update id</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[UPDTLVL parameter|UPDTLVL]]</var></th>
<td xml:space="preserve">Default update FLS level</td>
<td xml:space="preserve">File manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[UPRIV parameter|UPRIV]]</var></th>
<td xml:space="preserve">User privilege bits</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[USERID parameter|USERID]]</var></th>
<td xml:space="preserve">User id</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[USLCMAX parameter|USLCMAX]]</var></th>
<td xml:space="preserve">User slice max to CSLICE</td>
<td xml:space="preserve">User n parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[USLCWAIT parameter|USLCWAIT]]</var></th>
<td xml:space="preserve">User slice wait time</td>
<td xml:space="preserve">User n parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[VDP parameter|VDP]]</var></th>
<td xml:space="preserve">Default %var decimal places</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[VERIFY parameter|VERIFY]]</var></th>
<td xml:space="preserve">Write verify</td>
<td xml:space="preserve">File manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[VERSION parameter|VERSION]]</var></th>
<td xml:space="preserve">Release of Model 204</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[VLEN parameter|VLEN]]</var></th>
<td xml:space="preserve">Default %var length</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[VMFSCHNL parameter|VMFSCHNL]]</var></th>
<td xml:space="preserve">VMCF display mode channel name</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[VMIFCHNL parameter|VMIFCHNL]]</var></th>
<td xml:space="preserve">VMCF IFAM channel name</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[VMIOCHNL parameter|VMIOCHNL]]</var></th>
<td xml:space="preserve">VMCF line mode channel name</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[VTAMNAME parameter|VTAMNAME]]</var></th>
<td xml:space="preserve">VTAM application name</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[VTAMNTO parameter|VTAMNTO]]</var></th>
<td xml:space="preserve">VTAM NTO application name</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[VTGCSSRV parameter|VTGCSSRV]]</var></th>
<td xml:space="preserve">GCS service VM for VTAM terminals</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[VTLAPSY parameter|VTLAPSY]]</var></th>
<td xml:space="preserve">Login APSY for VT75 terminals [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[VTYPE parameter|VTYPE]]</var></th>
<td xml:space="preserve">Default %var type</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[WAITSCAN parameter|WAITSCAN]]</var></th>
<td xml:space="preserve">Wait scan interval</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[WAITTIME parameter|WAITTIME]]</var></th>
<td xml:space="preserve">Wait time in seconds for a response</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[WEBAUDIT parameter|WEBAUDIT]]</var></th>
<td xml:space="preserve">Janus Web audit trail reduction flags [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[WEBOPT parameter|WEBOPT]]</var></th>
<td xml:space="preserve">Miscellaneous Janus Web options [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[XAUTOINC parameter|XAUTOINC]]</var></th>
<td xml:space="preserve">Number of pages for table X auto increase</td>
<td xml:space="preserve">File manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[XDMSSN parameter|XDMSSN]]</var></th>
<td xml:space="preserve">XDM subsystem</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[XHIGHPG parameter|XHIGHPG]]</var></th>
<td xml:space="preserve">Table X highest active page</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[XMEMOPT parameter|XMEMOPT]]</var></th>
<td xml:space="preserve">Cross-memory PC options</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[XMEMSVC parameter|XMEMSVC]]</var></th>
<td xml:space="preserve">Cross-memory SVC #</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[XQLEN parameter|XQLEN]]</var></th>
<td xml:space="preserve">Table X queue length</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[XRECPPG parameter|XRECPPG]]</var></th>
<td xml:space="preserve">Table X slots per page</td>
<td xml:space="preserve">CREATE command</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[XRESERVE parameter|XRESERVE]]</var></th>
<td xml:space="preserve">Table X reserve space per page</td>
<td xml:space="preserve">File manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[XREUSE parameter|XREUSE]]</var></th>
<td xml:space="preserve">Free space required to reuse table X page</td>
<td xml:space="preserve">File manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[XREUSED parameter|XREUSED]]</var></th>
<td xml:space="preserve">Extension slots reused in table X</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[XSIZE parameter|XSIZE]]</var></th>
<td xml:space="preserve">Pages in table X</td>
<td xml:space="preserve">CREATE command</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[ZPAGEOPT parameter|ZPAGEOPT]]</var></th>
<td xml:space="preserve">1 mb page areas</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[ZQMAX parameter|ZQMAX]]</var></th>
<td xml:space="preserve">Z queue max length</td>
<td xml:space="preserve">System manager</td>
</tr>
</table>
</div>

Template:List of M204 parameters

2014-08-02T01:28:14Z

DVRICKP:

<div class="showVisit">
<table>
<tr class="head">
<th>Parameter name</th>
<th>Description</th>
<th>Set/reset type</th>
</tr>
<tr>
<th xml:space="preserve"><var>[[ACCOUNT parameter|ACCOUNT]]</var></th>
<td xml:space="preserve">Billing account</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[ACCTIM parameter|ACCTIM]]</var></th>
<td xml:space="preserve">Time before partial stat lines</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[ACTRDS parameter|ACTRDS]]</var></th>
<td xml:space="preserve">Active RSA subtasks [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[ADDLVL parameter|ADDLVL]]</var></th>
<td xml:space="preserve">Default add FLS level</td>
<td xml:space="preserve">File manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[AGEINCR parameter|AGEINCR]]</var></th>
<td xml:space="preserve">Aging priority increment</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[AGEINTVL parameter|AGEINTVL]]</var></th>
<td xml:space="preserve">Aging interval</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[AGESCAN parameter|AGESCAN]]</var></th>
<td xml:space="preserve">Age scan interval</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[AGESLICE parameter|AGESLICE]]</var></th>
<td xml:space="preserve">Aging slice increment</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[ALOCPRIV parameter|ALOCPRIV]]</var></th>
<td xml:space="preserve">Allocate privilege requirement</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[ALTIODEV parameter|ALTIODEV]]</var></th>
<td xml:space="preserve">Alternate user zero IODEV</td>
<td xml:space="preserve">EXEC PARM field</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[AMPSUBS parameter|AMPSUBS]]</var></th>
<td xml:space="preserve">Number of active offload subtasks</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[AMPSUBZ parameter|AMPSUBZ]]</var></th>
<td xml:space="preserve">Number of active zIIP eligible subtasks</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[APSYPAGE parameter|APSYPAGE]]</var></th>
<td xml:space="preserve">Number of APSY pages in hiperspace</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[APSYSEC parameter|APSYSEC]]</var></th>
<td xml:space="preserve">Sirius APSY security flags [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[APSYXMM parameter|APSYXMM]]</var></th>
<td xml:space="preserve">Expanded storage megabytes for saved APSY compilations [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[ARETRIES parameter|ARETRIES]]</var></th>
<td xml:space="preserve">Table A page retries</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[ASIZE parameter|ASIZE]]</var></th>
<td xml:space="preserve">Pages in table A</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[ASTRPPG parameter|ASTRPPG]]</var></th>
<td xml:space="preserve">Table A strings per page</td>
<td xml:space="preserve">CREATE command</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[ATRPG parameter|ATRPG]]</var></th>
<td xml:space="preserve">Table A attribute pages</td>
<td xml:space="preserve">CREATE command</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[AUDITOPT parameter|AUDITOPT]]</var></th>
<td xml:space="preserve">Audit options</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[AUTOGCN parameter|AUTOGCN]]</var></th>
<td xml:space="preserve">Garbage collection threshold [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[AUTOSYS parameter|AUTOSYS]]</var></th>
<td xml:space="preserve">Automatic subsystem</td>
<td xml:space="preserve">User n parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[B24EXCWT parameter|B24EXCWT]]</var></th>
<td xml:space="preserve">BATCH204 wait time(ms) between M204.0583 msgs</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[B24SHRWT parameter|B24SHRWT]]</var></th>
<td xml:space="preserve">BATCH204 wait time(ms) between M204.0582 msgs</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[BASECENT parameter|BASECENT]]</var></th>
<td xml:space="preserve">CENTSPLT base century</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[BAUTOINC parameter|BAUTOINC]]</var></th>
<td xml:space="preserve">Number of pages for table B auto increase</td>
<td xml:space="preserve">File manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[BAUTOTYP parameter|BAUTOTYP]]</var></th>
<td xml:space="preserve">Table B auto increase options [[#Obsolete parameters|(obs)]]</td>
<td xml:space="preserve">File manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[BEXTOVFL parameter|BEXTOVFL]]</var></th>
<td xml:space="preserve">Table B extra overflow areas</td>
<td xml:space="preserve">CREATE command</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[BHIGHPG parameter|BHIGHPG]]</var></th>
<td xml:space="preserve">Table B highest active page</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[BIGOBJL parameter|BIGOBJL]]</var></th>
<td xml:space="preserve">Size of object list considered big [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[BLOWPG parameter|BLOWPG]]</var></th>
<td xml:space="preserve">Table B lowest active page</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[BPGPMSTR parameter|BPGPMSTR]]</var></th>
<td xml:space="preserve">Table B pages/master area</td>
<td xml:space="preserve">CREATE command</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[BPGPOVFL parameter|BPGPOVFL]]</var></th>
<td xml:space="preserve">Table B pages/overflow area</td>
<td xml:space="preserve">CREATE command</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[BQLEN parameter|BQLEN]]</var></th>
<td xml:space="preserve">Table B queue length</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[BRECPPG parameter|BRECPPG]]</var></th>
<td xml:space="preserve">Table B records per page</td>
<td xml:space="preserve">CREATE command</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[BRESERVE parameter|BRESERVE]]</var></th>
<td xml:space="preserve">Table B reserve space</td>
<td xml:space="preserve">File manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[BREUSE parameter|BREUSE]]</var></th>
<td xml:space="preserve">Free space required to reuse table B page</td>
<td xml:space="preserve">File manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[BREUSED parameter|BREUSED]]</var></th>
<td xml:space="preserve">Records added reusing record numbers</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[BRLIMSZ parameter|BRLIMSZ]]</var></th>
<td xml:space="preserve">Table B record limit size</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[BSIZE parameter|BSIZE]]</var></th>
<td xml:space="preserve">Pages in table B</td>
<td xml:space="preserve">CREATE command</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[CACHE parameter|CACHE]]</var></th>
<td xml:space="preserve">Cache fast write</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[CASE parameter|CASE]]</var></th>
<td xml:space="preserve">Text input case</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[CAUDIT parameter|CAUDIT]]</var></th>
<td xml:space="preserve">Card audit bits</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[CDMAXP2X parameter|CDMAXP2X]]</var></th>
<td xml:space="preserve">Maximum constraints pages power of 2</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[CDMINP2X parameter|CDMINP2X]]</var></th>
<td xml:space="preserve">Minimum constraints pages power of 2</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[CECHO parameter|CECHO]]</var></th>
<td xml:space="preserve">Card echo</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[CEECHO parameter|CEECHO]]</var></th>
<td xml:space="preserve">Card edit echo</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[CENTSPAN parameter|CENTSPAN]]</var></th>
<td xml:space="preserve">CENTSPAN for date $functions [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[CENTSPLT parameter|CENTSPLT]]</var></th>
<td xml:space="preserve">Century year split</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[CFRJRNL parameter|CFRJRNL]]</var></th>
<td xml:space="preserve">CFR+rec locking stats to CCAJRNL</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[CFRLOOK parameter|CFRLOOK]]</var></th>
<td xml:space="preserve">CFR+rec locking stats to monitor</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[CFRWPCT parameter|CFRWPCT]]</var></th>
<td xml:space="preserve">Max nonswappable CFR waiters</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[CHKPRIV parameter|CHKPRIV]]</var></th>
<td xml:space="preserve">Checkpoint privilege requirement</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[CMSVERSN parameter|CMSVERSN]]</var></th>
<td xml:space="preserve">Version of the CMS interface</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[COMEND parameter|COMEND]]</var></th>
<td xml:space="preserve">End of comment block</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[COMMAND parameter|COMMAND]]</var></th>
<td xml:space="preserve">Model204 command table</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[COMMLOG parameter|COMMLOG]]</var></th>
<td xml:space="preserve">$Command login flags [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[COMPERR parameter|COMPERR]]</var></th>
<td xml:space="preserve">Compiler error reporting options</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[COMPOPT parameter|COMPOPT]]</var></th>
<td xml:space="preserve">Compiler options [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[COMSTART parameter|COMSTART]]</var></th>
<td xml:space="preserve">Start of comment block</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[CP3270 parameter|CP3270]]</var></th>
<td xml:space="preserve">3270 code page ID [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[CPMAX parameter|CPMAX]]</var></th>
<td xml:space="preserve">Max # of checkpoints</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[CPQZACTN parameter|CPQZACTN]]</var></th>
<td xml:space="preserve">Checkpoint extended quiesce timeout action</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[CPQZSECS parameter|CPQZSECS]]</var></th>
<td xml:space="preserve">Number of seconds before CPQZACTN</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[CPSORT parameter|CPSORT]]</var></th>
<td xml:space="preserve">IFAM2 CHKP signon tries</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[CPTIME parameter|CPTIME]]</var></th>
<td xml:space="preserve">Minutes between checkpoints</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[CPTO parameter|CPTO]]</var></th>
<td xml:space="preserve">Checkpoint timeout in seconds</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[CPTQ parameter|CPTQ]]</var></th>
<td xml:space="preserve">Batch quiesce timeout in seconds</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[CPTS parameter|CPTS]]</var></th>
<td xml:space="preserve">Sub-transaction timeout in seconds</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[CPTYPE parameter|CPTYPE]]</var></th>
<td xml:space="preserve">Checkpoint type</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[CPUSLICE parameter|CPUSLICE]]</var></th>
<td xml:space="preserve">CPU slice - CPU</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[CRETRIES parameter|CRETRIES]]</var></th>
<td xml:space="preserve">Table C page retries</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[CRFSCHNL parameter|CRFSCHNL]]</var></th>
<td xml:space="preserve">Full screen CRAM name</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[CRIOCHNL parameter|CRIOCHNL]]</var></th>
<td xml:space="preserve">User language CRAM channel name</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[CS3270 parameter|CS3270]]</var></th>
<td xml:space="preserve">3270 character set ID [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[CSECHO parameter|CSECHO]]</var></th>
<td xml:space="preserve">Card substitution echo</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[CSIPID parameter|CSIPID]]</var></th>
<td xml:space="preserve">TCP/IP system ID [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[CSIZE parameter|CSIZE]]</var></th>
<td xml:space="preserve">Pages in table C</td>
<td xml:space="preserve">CREATE command</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[CURALVL parameter|CURALVL]]</var></th>
<td xml:space="preserve">Add FLS level for file/group</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[CURCLASS parameter|CURCLASS]]</var></th>
<td xml:space="preserve">User priv class (proc) for file/group</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[CURFILE parameter|CURFILE]]</var></th>
<td xml:space="preserve">Current file</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[CURLOC parameter|CURLOC]]</var></th>
<td xml:space="preserve">CURFILE location if remote</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[CURPRIV parameter|CURPRIV]]</var></th>
<td xml:space="preserve">Privs for current file/group</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[CURREC parameter|CURREC]]</var></th>
<td xml:space="preserve">Current record number</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[CURREP31 parameter|CURREP31]]</var></th>
<td xml:space="preserve">Current 31-bit storage for report writers (megabytes) [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[CURREP64 parameter|CURREP64]]</var></th>
<td xml:space="preserve">Current 64-bit storage for report writers (megabytes) [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[CURRLVL parameter|CURRLVL]]</var></th>
<td xml:space="preserve">Read FLS level for file/group</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[CURSLVL parameter|CURSLVL]]</var></th>
<td xml:space="preserve">Select FLS level for file/group</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[CURULVL parameter|CURULVL]]</var></th>
<td xml:space="preserve">Update FLS level for file/group</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[CUSTOM parameter|CUSTOM]]</var></th>
<td xml:space="preserve">Enable special modifications to Model 204</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[D$ONEOF parameter|D$ONEOF]]</var></th>
<td xml:space="preserve">$OneOf item delimiter</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[DACTIVE parameter|DACTIVE]]</var></th>
<td xml:space="preserve">List page active</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[DAUTOINC parameter|DAUTOINC]]</var></th>
<td xml:space="preserve">Number of pages for table D auto increase</td>
<td xml:space="preserve">File manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[DB2PLAN parameter|DB2PLAN]]</var></th>
<td xml:space="preserve">DB2 plan name</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[DB2POINT parameter|DB2POINT]]</var></th>
<td xml:space="preserve">Exec DB2 decimal point</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[DB2QUOTE parameter|DB2QUOTE]]</var></th>
<td xml:space="preserve">Exec DB2 quote</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[DB2THRD parameter|DB2THRD]]</var></th>
<td xml:space="preserve">Number of DB2 threads</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[DEBUGMAX parameter|DEBUGMAX]]</var></th>
<td xml:space="preserve">Maximum debug worker threads [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[DEBUGPAG parameter|DEBUGPAG]]</var></th>
<td xml:space="preserve">Maximum debug CCATEMP pages [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[DEBUGUL parameter|DEBUGUL]]</var></th>
<td xml:space="preserve">User language debug options</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[DEFCENT parameter|DEFCENT]]</var></th>
<td xml:space="preserve">Default century</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[DEFINCP parameter|DEFINCP]]</var></th>
<td xml:space="preserve">Default automatic table size pct increase</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[DHIGHPG parameter|DHIGHPG]]</var></th>
<td xml:space="preserve">Table D highest page used</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[DKUPDTWT parameter|DKUPDTWT]]</var></th>
<td xml:space="preserve"># seconds after file's last update before file is updated on disk</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[DPGSRES parameter|DPGSRES]]</var></th>
<td xml:space="preserve">Table D pages reserved</td>
<td xml:space="preserve">File manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[DPGSUSED parameter|DPGSUSED]]</var></th>
<td xml:space="preserve">Table D pages in use</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[DRESERVE parameter|DRESERVE]]</var></th>
<td xml:space="preserve">List page reserve space</td>
<td xml:space="preserve">File manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[DSIZE parameter|DSIZE]]</var></th>
<td xml:space="preserve">Pages in table D</td>
<td xml:space="preserve">CREATE command</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[DSPOPT parameter|DSPOPT]]</var></th>
<td xml:space="preserve">Data space options</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[DTS parameter|DTS]]</var></th>
<td xml:space="preserve">Date time stamp updates (1=automatic, 0=bypassed)</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[DTSFN parameter|DTSFN]]</var></th>
<td xml:space="preserve">Date time stamp field name</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[DUFILES parameter|DUFILES]]</var></th>
<td xml:space="preserve">Files open in deferred update mode</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[DUMPAOPT parameter|DUMPAOPT]]</var></th>
<td xml:space="preserve">MP altpdl dump options</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[DUMPMOPT parameter|DUMPMOPT]]</var></th>
<td xml:space="preserve">MP maintask dump options</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[DUMPOPTS parameter|DUMPOPTS]]</var></th>
<td xml:space="preserve">Fast Backup/Restore flags [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[DUMPSOPT parameter|DUMPSOPT]]</var></th>
<td xml:space="preserve">MP subtask dump options</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[DUMPTMAX parameter|DUMPTMAX]]</var></th>
<td xml:space="preserve">Maximum CCATEMP usage for DUMP [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[DUMPTMIN parameter|DUMPTMIN]]</var></th>
<td xml:space="preserve">Minimum free CCATEMP for DUMP [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[DUPTERM parameter|DUPTERM]]</var></th>
<td xml:space="preserve">Number of duplicate terminals</td>
<td xml:space="preserve">User n parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[DVADD parameter|DVADD]]</var></th>
<td xml:space="preserve">Device address</td>
<td xml:space="preserve">User n parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[ECISUBS parameter|ECISUBS]]</var></th>
<td xml:space="preserve">ECF initial subtasks</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[ECMODS parameter|ECMODS]]</var></th>
<td xml:space="preserve">ECF maximum modules loaded</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[ECMSUBS parameter|ECMSUBS]]</var></th>
<td xml:space="preserve">ECF maximum subtasks</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[ECNAMES parameter|ECNAMES]]</var></th>
<td xml:space="preserve">ECF maximum call names</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[ECPRIV parameter|ECPRIV]]</var></th>
<td xml:space="preserve">ECF privileges</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[ECPSIZE parameter|ECPSIZE]]</var></th>
<td xml:space="preserve">ECF initial parameter area allocation</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[ECWAIT parameter|ECWAIT]]</var></th>
<td xml:space="preserve">ECF maximum wait for external call</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[EDIT parameter|EDIT]]</var></th>
<td xml:space="preserve">Edit control</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[EHIGHPG parameter|EHIGHPG]]</var></th>
<td xml:space="preserve">Table E highest page used</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[ENQRETRY parameter|ENQRETRY]]</var></th>
<td xml:space="preserve">Retry record locking</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[ENTTAB parameter|ENTTAB]]</var></th>
<td xml:space="preserve">Default entity translation table [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[EOJPW parameter|EOJPW]]</var></th>
<td xml:space="preserve">EOJ password</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[EOVFLADD parameter|EOVFLADD]]</var></th>
<td xml:space="preserve">Records added to extra overflow areas</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[EOVFLDEL parameter|EOVFLDEL]]</var></th>
<td xml:space="preserve">Records deleted from ext ovflow areas</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[EPGSUSED parameter|EPGSUSED]]</var></th>
<td xml:space="preserve">Table E pages in use</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[ERASE parameter|ERASE]]</var></th>
<td xml:space="preserve">Erase-character symbol</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[ERCNT parameter|ERCNT]]</var></th>
<td xml:space="preserve">Error count [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[ERMX parameter|ERMX]]</var></th>
<td xml:space="preserve">Maximum number of errors</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[ERRLEN parameter|ERRLEN]]</var></th>
<td xml:space="preserve">Length of errors saved</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[ERRMSGL parameter|ERRMSGL]]</var></th>
<td xml:space="preserve">Saved error message length</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[ERRSAVE parameter|ERRSAVE]]</var></th>
<td xml:space="preserve">No of errors saved</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[ESIZE parameter|ESIZE]]</var></th>
<td xml:space="preserve">Pages in table E</td>
<td xml:space="preserve">CREATE command</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[EXCPVR parameter|EXCPVR]]</var></th>
<td xml:space="preserve">EXCPVR appendage id</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[EXTNADD parameter|EXTNADD]]</var></th>
<td xml:space="preserve">Extension records added</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[EXTNDEL parameter|EXTNDEL]]</var></th>
<td xml:space="preserve">Extension records deleted</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[FACTDEB parameter|FACTDEB]]</var></th>
<td xml:space="preserve">SirFact debugging flags [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[FASTGLOB parameter|FASTGLOB]]</var></th>
<td xml:space="preserve">Fast global processing</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[FICREATE parameter|FICREATE]]</var></th>
<td xml:space="preserve">Create format</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[FIFLAGS parameter|FIFLAGS]]</var></th>
<td xml:space="preserve">File status switches</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[FIFORMAT parameter|FIFORMAT]]</var></th>
<td xml:space="preserve">Current FPL format</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[FILEMODL parameter|FILEMODL]]</var></th>
<td xml:space="preserve">File model enforced</td>
<td xml:space="preserve">File manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[FILEORG parameter|FILEORG]]</var></th>
<td xml:space="preserve">File organization</td>
<td xml:space="preserve">CREATE command</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[FISTAT parameter|FISTAT]]</var></th>
<td xml:space="preserve">Current status of file</td>
<td xml:space="preserve">File manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[FITRANS parameter|FITRANS]]</var></th>
<td xml:space="preserve">Transform format</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[FIXSIZE parameter|FIXSIZE]]</var></th>
<td xml:space="preserve">Fixed server size requirement</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[FLUSH parameter|FLUSH]]</var></th>
<td xml:space="preserve">Erase-line symbol</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[FNVMASK parameter|FNVMASK]]</var></th>
<td xml:space="preserve">Filename version mask [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[FOPT parameter|FOPT]]</var></th>
<td xml:space="preserve">File options</td>
<td xml:space="preserve">File manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[FRCVOPT parameter|FRCVOPT]]</var></th>
<td xml:space="preserve">File recovery options</td>
<td xml:space="preserve">File manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[FREESIZE parameter|FREESIZE]]</var></th>
<td xml:space="preserve">Pages in free space</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[FRELPREV parameter|FRELPREV]]</var></th>
<td xml:space="preserve">Fast/Reload previous request number [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[FSATTN parameter|FSATTN]]</var></th>
<td xml:space="preserve">Full screen attention key</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[FSOUTPUT parameter|FSOUTPUT]]</var></th>
<td xml:space="preserve">Full screen color and highlighting</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[FSTRMOPT parameter|FSTRMOPT]]</var></th>
<td xml:space="preserve">Full screen terminal options</td>
<td xml:space="preserve">User n parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[FUNCOPTS parameter|FUNCOPTS]]</var></th>
<td xml:space="preserve">Sirius function flags [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[FUNMAXT parameter|FUNMAXT]]</var></th>
<td xml:space="preserve">Default Fast/Unload request timeout (seconds) [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[FUNPARM parameter|FUNPARM]]</var></th>
<td xml:space="preserve">Fast/Unload system flags [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[FUNPGM parameter|FUNPGM]]</var></th>
<td xml:space="preserve">Name of Fast/Unload load module [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[FUNPRMU parameter|FUNPRMU]]</var></th>
<td xml:space="preserve">Fast/Unload user flags [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[FUNTSKN parameter|FUNTSKN]]</var></th>
<td xml:space="preserve">Maximum Fast/Unload tasks [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[FVFPG parameter|FVFPG]]</var></th>
<td xml:space="preserve">Table A few valued field pages</td>
<td xml:space="preserve">CREATE command</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[GCSTATS parameter|GCSTATS]]</var></th>
<td xml:space="preserve">Garbage collector statistics [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[GTBLHASH parameter|GTBLHASH]]</var></th>
<td xml:space="preserve">Number of hashed GTBL buckets</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[GTBLPCT parameter|GTBLPCT]]</var></th>
<td xml:space="preserve">Initial GTBL percentage to allocate for plain globals</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[HASHCELL parameter|HASHCELL]]</var></th>
<td xml:space="preserve">Hash cells per buffer</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[HASHKEY parameter|HASHKEY]]</var></th>
<td xml:space="preserve">Name of file's hash key field</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[HASHSPIL parameter|HASHSPIL]]</var></th>
<td xml:space="preserve">Hash file spill chain length</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[HDRCTL parameter|HDRCTL]]</var></th>
<td xml:space="preserve">Header control</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[HGHREP31 parameter|HGHREP31]]</var></th>
<td xml:space="preserve">High 31-bit storage for report writers (megabytes) [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[HGHREP64 parameter|HGHREP64]]</var></th>
<td xml:space="preserve">High 64-bit storage for report writers (megabytes) [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[HIGHSORT parameter|HIGHSORT]]</var></th>
<td xml:space="preserve">Record with highest sort key</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[HTLEN parameter|HTLEN]]</var></th>
<td xml:space="preserve">Max length of each header or trailer</td>
<td xml:space="preserve">User n parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[IFAMBS parameter|IFAMBS]]</var></th>
<td xml:space="preserve">IFAM2 buffer size</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[IFAMCHNL parameter|IFAMCHNL]]</var></th>
<td xml:space="preserve">IFAM2 CRAM channel name</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[INCCC parameter|INCCC]]</var></th>
<td xml:space="preserve">Input cont char column</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[INCSLICE parameter|INCSLICE]]</var></th>
<td xml:space="preserve">Include slicing limit</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[INMRL parameter|INMRL]]</var></th>
<td xml:space="preserve">Max input record length</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[INPUT parameter|INPUT]]</var></th>
<td xml:space="preserve">Input device name</td>
<td xml:space="preserve">User n parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[IODEV parameter|IODEV]]</var></th>
<td xml:space="preserve">Type of I/O device</td>
<td xml:space="preserve">User n parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[IOSLICE parameter|IOSLICE]]</var></th>
<td xml:space="preserve">CPU slice - IO</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[IPADDR parameter|IPADDR]]</var></th>
<td xml:space="preserve">IP address</td>
<td xml:space="preserve">User n parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[IVERIFY parameter|IVERIFY]]</var></th>
<td xml:space="preserve">Write verify - initialization</td>
<td xml:space="preserve">CREATE command</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[JANDEBM parameter|JANDEBM]]</var></th>
<td xml:space="preserve">Janus Web debugging message flags [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[JESID parameter|JESID]]</var></th>
<td xml:space="preserve">JES job id</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[JOBNM parameter|JOBNM]]</var></th>
<td xml:space="preserve">Job name</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[JOBSTEP parameter|JOBSTEP]]</var></th>
<td xml:space="preserve">Job step name</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[KOMMOPT parameter|KOMMOPT]]</var></th>
<td xml:space="preserve">KOMM options [[#Obsolete parameters|(obs)]]</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[LANGFILE parameter|LANGFILE]]</var></th>
<td xml:space="preserve">Language name for file</td>
<td xml:space="preserve">File manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[LANGUSER parameter|LANGUSER]]</var></th>
<td xml:space="preserve">Language name for thread</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[LAUDIT parameter|LAUDIT]]</var></th>
<td xml:space="preserve">Line audit bits</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[LAUDPROC parameter|LAUDPROC]]</var></th>
<td xml:space="preserve">Length of audit procedure names</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[LCPDLST parameter|LCPDLST]]</var></th>
<td xml:space="preserve">Length of C push-down list</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[LDKBMW parameter|LDKBMW]]</var></th>
<td xml:space="preserve"># of pages in DKBM stat window</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[LDKBMWND parameter|LDKBMWND]]</var></th>
<td xml:space="preserve"># of pages in DKBM LRU window</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[LDKBMWNG parameter|LDKBMWNG]]</var></th>
<td xml:space="preserve"># of pages in above-the-bar DKBM LRU window</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[LECHO parameter|LECHO]]</var></th>
<td xml:space="preserve">Line echo</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[LEECHO parameter|LEECHO]]</var></th>
<td xml:space="preserve">Line edit echo</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[LENQTBL parameter|LENQTBL]]</var></th>
<td xml:space="preserve"># of resource locking table entries per user</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[LFSCB parameter|LFSCB]]</var></th>
<td xml:space="preserve">Length of full screen buffer</td>
<td xml:space="preserve">User n parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[LFTBL parameter|LFTBL]]</var></th>
<td xml:space="preserve">Length of FTBL</td>
<td xml:space="preserve">User n parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[LGTBL parameter|LGTBL]]</var></th>
<td xml:space="preserve">Length of global variable table</td>
<td xml:space="preserve">User n parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[LHEAP parameter|LHEAP]]</var></th>
<td xml:space="preserve">Length of heap</td>
<td xml:space="preserve">User n parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[LIBUFF parameter|LIBUFF]]</var></th>
<td xml:space="preserve">Length of input buffer</td>
<td xml:space="preserve">User n parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[LINEND parameter|LINEND]]</var></th>
<td xml:space="preserve">Logical line end symbol</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[LITBL parameter|LITBL]]</var></th>
<td xml:space="preserve">Length of ITBL</td>
<td xml:space="preserve">User n parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[LNTBL parameter|LNTBL]]</var></th>
<td xml:space="preserve">Length of NTBL</td>
<td xml:space="preserve">User n parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[LOBUFF parameter|LOBUFF]]</var></th>
<td xml:space="preserve">Length of output buffer</td>
<td xml:space="preserve">User n parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[LOCATION parameter|LOCATION]]</var></th>
<td xml:space="preserve">D204 location</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[LOGADD parameter|LOGADD]]</var></th>
<td xml:space="preserve">Room for password additions</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[LOGFAIL parameter|LOGFAIL]]</var></th>
<td xml:space="preserve">Action to be taken if logtry exceeded</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[LOGONENQ parameter|LOGONENQ]]</var></th>
<td xml:space="preserve">Userid logon enqueue</td>
<td xml:space="preserve">User n parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[LOGTRY parameter|LOGTRY]]</var></th>
<td xml:space="preserve">Maximum number of login attempts allowed per thread</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[LOUTPB parameter|LOUTPB]]</var></th>
<td xml:space="preserve">Length of output page buffer</td>
<td xml:space="preserve">User n parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[LPDLST parameter|LPDLST]]</var></th>
<td xml:space="preserve">Length of user push down list</td>
<td xml:space="preserve">User n parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[LPFORCE parameter|LPFORCE]]</var></th>
<td xml:space="preserve">Force procedure audit</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[LQTBL parameter|LQTBL]]</var></th>
<td xml:space="preserve">Length of QTBL</td>
<td xml:space="preserve">User n parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[LRECLTBL parameter|LRECLTBL]]</var></th>
<td xml:space="preserve">Length of record locking table (deprecated - use LRETBL)</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[LRESLTBL parameter|LRESLTBL]]</var></th>
<td xml:space="preserve"># of resource locking table entries per user (deprecated - use LENQTBL)</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[LRETBL parameter|LRETBL]]</var></th>
<td xml:space="preserve">Length of record locking table</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[LRUPG parameter|LRUPG]]</var></th>
<td xml:space="preserve">LRU pages remembered</td>
<td xml:space="preserve">EXEC PARM field</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[LRUTIM parameter|LRUTIM]]</var></th>
<td xml:space="preserve">Time to flush obsolete LRU references</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[LSECHO parameter|LSECHO]]</var></th>
<td xml:space="preserve">Line substitution echo</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[LSERVER parameter|LSERVER]]</var></th>
<td xml:space="preserve">Server size requirement</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[LSERVPD parameter|LSERVPD]]</var></th>
<td xml:space="preserve">Length of scheduler pdl [[#Obsolete parameters|(obs)]]</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[LSTBL parameter|LSTBL]]</var></th>
<td xml:space="preserve">Length of STBL</td>
<td xml:space="preserve">User n parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[LSTRLOB parameter|LSTRLOB]]</var></th>
<td xml:space="preserve">Treat LOBs as Longstrings [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[LTTBL parameter|LTTBL]]</var></th>
<td xml:space="preserve">Length of TTBL</td>
<td xml:space="preserve">User n parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[LVLTRC parameter|LVLTRC]]</var></th>
<td xml:space="preserve">End of input stream message</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[LVTBL parameter|LVTBL]]</var></th>
<td xml:space="preserve">Length of VTBL</td>
<td xml:space="preserve">User n parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[LXTBL parameter|LXTBL]]</var></th>
<td xml:space="preserve">Length of XTBL</td>
<td xml:space="preserve">User n parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[MARKSAN parameter|MARKSAN]]</var></th>
<td xml:space="preserve">Maximum items in a MarksArray [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[MAXAUSER parameter|MAXAUSER]]</var></th>
<td xml:space="preserve">Maximum active interactive users [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[MAXAUSEW parameter|MAXAUSEW]]</var></th>
<td xml:space="preserve">Minimum seconds between MAXAUSER warnings [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[MAXBG parameter|MAXBG]]</var></th>
<td xml:space="preserve">Maximum background/independent Daemons [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[MAXBUF parameter|MAXBUF]]</var></th>
<td xml:space="preserve">Maximum number of buffers</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[MAXDAEM parameter|MAXDAEM]]</var></th>
<td xml:space="preserve">Maximum Daemon objects per user [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[MAXHDR parameter|MAXHDR]]</var></th>
<td xml:space="preserve">Max number of headers</td>
<td xml:space="preserve">User n parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[MAXINCBP parameter|MAXINCBP]]</var></th>
<td xml:space="preserve">Maximum dynamic table B size pct increase</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[MAXINCL parameter|MAXINCL]]</var></th>
<td xml:space="preserve">Max Include level</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[MAXOBUF parameter|MAXOBUF]]</var></th>
<td xml:space="preserve">Maximum open buffers per user</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[MAXOND parameter|MAXOND]]</var></th>
<td xml:space="preserve">Maximum ON unit Depth</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[MAXRDS parameter|MAXRDS]]</var></th>
<td xml:space="preserve">Maximum RSA subtasks [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[MAXREP31 parameter|MAXREP31]]</var></th>
<td xml:space="preserve">Maximum 31-bit storage for report writers (megabytes) [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[MAXREP64 parameter|MAXREP64]]</var></th>
<td xml:space="preserve">Maximum 64-bit storage for report writers (megabytes) [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[MAXSIMIO parameter|MAXSIMIO]]</var></th>
<td xml:space="preserve">Max simultaneous disk I/Os</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[MAXSPINS parameter|MAXSPINS]]</var></th>
<td xml:space="preserve">Max number of spins for mplock</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[MAXTIME parameter|MAXTIME]]</var></th>
<td xml:space="preserve">Maximum run time</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[MAXTRL parameter|MAXTRL]]</var></th>
<td xml:space="preserve">Max number of trailers</td>
<td xml:space="preserve">User n parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[MAXUD parameter|MAXUD]]</var></th>
<td xml:space="preserve">Long update unit durations (ms)</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[MBSCAN parameter|MBSCAN]]</var></th>
<td xml:space="preserve">Max table B records scan</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[MCNCT parameter|MCNCT]]</var></th>
<td xml:space="preserve">Max connect time</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[MCPU parameter|MCPU]]</var></th>
<td xml:space="preserve">Max CPU time</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[MDKRD parameter|MDKRD]]</var></th>
<td xml:space="preserve">Max disk reads</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[MDKWR parameter|MDKWR]]</var></th>
<td xml:space="preserve">Max disk writes</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[MINBUF parameter|MINBUF]]</var></th>
<td xml:space="preserve">Minimum number of buffers</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[MISCOPT parameter|MISCOPT]]</var></th>
<td xml:space="preserve">Miscellaneous system options [[#Obsolete parameters|(obs)]]</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[MODEL parameter|MODEL]]</var></th>
<td xml:space="preserve">Terminal model</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[MODPROT parameter|MODPROT]]</var></th>
<td xml:space="preserve">204 load module protection flags [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[MODTIM parameter|MODTIM]]</var></th>
<td xml:space="preserve">Julian date-time of Model 204 module</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[MONPARM parameter|MONPARM]]</var></th>
<td xml:space="preserve">SirMon system flags [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[MOUT parameter|MOUT]]</var></th>
<td xml:space="preserve">Max output lines</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[MPOPTS parameter|MPOPTS]]</var></th>
<td xml:space="preserve">MP user language options</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[MPSYS parameter|MPSYS]]</var></th>
<td xml:space="preserve">MP/204 system flags</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[MQBUFSZ parameter|MQBUFSZ]]</var></th>
<td xml:space="preserve">Initial universal buffer size</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[MQDEQMAN parameter|MQDEQMAN]]</var></th>
<td xml:space="preserve">MQ/204 default queue manager</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[MQINTASK parameter|MQINTASK]]</var></th>
<td xml:space="preserve">Initial MQ/204 subtasks</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[MQMXTASK parameter|MQMXTASK]]</var></th>
<td xml:space="preserve">Maximum MQ/204 subtasks</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[MQSUBREL parameter|MQSUBREL]]</var></th>
<td xml:space="preserve">Release MQ subtask (1-release, 0 - retain)</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[MQWAIT parameter|MQWAIT]]</var></th>
<td xml:space="preserve">Maximum wait for MQ/204 subtask</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[MSGCTL parameter|MSGCTL]]</var></th>
<td xml:space="preserve">Message printing options</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[MSRES parameter|MSRES]]</var></th>
<td xml:space="preserve">Maximum SREs per file in RETBL</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[MSTRADD parameter|MSTRADD]]</var></th>
<td xml:space="preserve">Records added to master areas</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[MSTRDEL parameter|MSTRDEL]]</var></th>
<td xml:space="preserve">Records deleted from master areas</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[MUDD parameter|MUDD]]</var></th>
<td xml:space="preserve">Max UDD lines</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[MVFPG parameter|MVFPG]]</var></th>
<td xml:space="preserve">Table A many valued field pages</td>
<td xml:space="preserve">CREATE command</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[MXIJLOG parameter|MXIJLOG]]</var></th>
<td xml:space="preserve">Number of 4k pages for JLOG statistics</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[NBKPG parameter|NBKPG]]</var></th>
<td xml:space="preserve">Number of backpages kept</td>
<td xml:space="preserve">User n parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[NCMPBUF parameter|NCMPBUF]]</var></th>
<td xml:space="preserve">Number of compression buffers [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[NDCBS parameter|NDCBS]]</var></th>
<td xml:space="preserve">Number of file DCBs</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[NDIR parameter|NDIR]]</var></th>
<td xml:space="preserve">Number of file directory entries</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[NECBS parameter|NECBS]]</var></th>
<td xml:space="preserve">Number of ECBs</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[NFILES parameter|NFILES]]</var></th>
<td xml:space="preserve">Number of file areas</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[NGROUP parameter|NGROUP]]</var></th>
<td xml:space="preserve">Max # of open groups</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[NJBUFF parameter|NJBUFF]]</var></th>
<td xml:space="preserve">Number of journal buffers</td>
<td xml:space="preserve">EXEC PARM field</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[NLBUFF parameter|NLBUFF]]</var></th>
<td xml:space="preserve">Number of CCAJLOG buffers</td>
<td xml:space="preserve">EXEC PARM field</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[NLRUQ parameter|NLRUQ]]</var></th>
<td xml:space="preserve"># of DKBM LRU queues</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[NLRUQG parameter|NLRUQG]]</var></th>
<td xml:space="preserve"># of above-the-bar DKBM LRU queues</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[NMPSUBS parameter|NMPSUBS]]</var></th>
<td xml:space="preserve">Number of offload subtasks</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[NMPSUBZ parameter|NMPSUBZ]]</var></th>
<td xml:space="preserve">Number of zIIP eligible subtasks</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[NOECBS parameter|NOECBS]]</var></th>
<td xml:space="preserve">Number of ECBs</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[NORQS parameter|NORQS]]</var></th>
<td xml:space="preserve">Number of requests preserved</td>
<td xml:space="preserve">User n parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[NOTERM parameter|NOTERM]]</var></th>
<td xml:space="preserve">Number of terminals on line</td>
<td xml:space="preserve">User n parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[NOTHREAD parameter|NOTHREAD]]</var></th>
<td xml:space="preserve">Number of inbound threads</td>
<td xml:space="preserve">User n parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[NOUTBUF parameter|NOUTBUF]]</var></th>
<td xml:space="preserve"># of full screen output buffers</td>
<td xml:space="preserve">User n parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[NRMTFILE parameter|NRMTFILE]]</var></th>
<td xml:space="preserve">Number of remote file areas</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[NRMTLOCS parameter|NRMTLOCS]]</var></th>
<td xml:space="preserve">Number of remote locations</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[NSERVS parameter|NSERVS]]</var></th>
<td xml:space="preserve">Number of servers</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[NSUBTKS parameter|NSUBTKS]]</var></th>
<td xml:space="preserve">Max number of pseudo-subtasks</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[NUMBUF parameter|NUMBUF]]</var></th>
<td xml:space="preserve">Number of buffers</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[NUMBUFG parameter|NUMBUFG]]</var></th>
<td xml:space="preserve">Number of above-the-bar buffers</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[NUSERS parameter|NUSERS]]</var></th>
<td xml:space="preserve">Number of users</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[OBJSTAT parameter|OBJSTAT]]</var></th>
<td xml:space="preserve">Sirius object statistic flags [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[OBJSTMIN parameter|OBJSTMIN]]</var></th>
<td xml:space="preserve">Sirius object statistic minimum [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[OIDEPTH parameter|OIDEPTH]]</var></th>
<td xml:space="preserve">No. levels of ordered index nodes</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[OILEAVES parameter|OILEAVES]]</var></th>
<td xml:space="preserve">No. ordered index nodes: leaves</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[OILPACT parameter|OILPACT]]</var></th>
<td xml:space="preserve">Ordered index list page active</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[OINBYTES parameter|OINBYTES]]</var></th>
<td xml:space="preserve">No. ordered index bytes</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[OINENTRY parameter|OINENTRY]]</var></th>
<td xml:space="preserve">No. ordered index entries</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[OINODES parameter|OINODES]]</var></th>
<td xml:space="preserve">No. ordered index nodes: all levels</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[OPENCTL parameter|OPENCTL]]</var></th>
<td xml:space="preserve">Open control flags</td>
<td xml:space="preserve">File manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[OPSYS parameter|OPSYS]]</var></th>
<td xml:space="preserve">Operating system</td>
<td xml:space="preserve">EXEC PARM field</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[OUTCCC parameter|OUTCCC]]</var></th>
<td xml:space="preserve">Output cont char column</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[OUTLPP parameter|OUTLPP]]</var></th>
<td xml:space="preserve">Output lines per page</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[OUTMRL parameter|OUTMRL]]</var></th>
<td xml:space="preserve">Max output record length</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[OUTPNO parameter|OUTPNO]]</var></th>
<td xml:space="preserve">Output page number</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[OUTPUT parameter|OUTPUT]]</var></th>
<td xml:space="preserve">Output device name</td>
<td xml:space="preserve">User n parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[OVFLADD parameter|OVFLADD]]</var></th>
<td xml:space="preserve">Records added to overflow areas</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[OVFLDEL parameter|OVFLDEL]]</var></th>
<td xml:space="preserve">Records deleted from overflow areas</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[PAGE parameter|PAGE]]</var></th>
<td xml:space="preserve">Backpage command character</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[PAGEFIX parameter|PAGEFIX]]</var></th>
<td xml:space="preserve">Page-fix parameter string</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[PAGESZ parameter|PAGESZ]]</var></th>
<td xml:space="preserve">File page size</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[PDSIZE parameter|PDSIZE]]</var></th>
<td xml:space="preserve">Pages per procedure dictionary section</td>
<td xml:space="preserve">CREATE command</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[PDSTRPPG parameter|PDSTRPPG]]</var></th>
<td xml:space="preserve">Names/procedure dictionary page limit</td>
<td xml:space="preserve">CREATE command</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[PERFOPT parameter|PERFOPT]]</var></th>
<td xml:space="preserve">Sirius Performance Enhancement flags [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[PERFOPT2 parameter|PERFOPT2]]</var></th>
<td xml:space="preserve">Sirius Performance Enhancement flags V2 [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[PGSEP parameter|PGSEP]]</var></th>
<td xml:space="preserve">Lines between pages</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[POLLNO parameter|POLLNO]]</var></th>
<td xml:space="preserve">Relative polling number</td>
<td xml:space="preserve">User n parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[PQOOPT parameter|PQOOPT]]</var></th>
<td xml:space="preserve">Parallel query options</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[PQOSYS parameter|PQOSYS]]</var></th>
<td xml:space="preserve">Parallel query system options</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[PRCLDEF parameter|PRCLDEF]]</var></th>
<td xml:space="preserve">Default user class for procedures</td>
<td xml:space="preserve">File manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[PRIOMAX parameter|PRIOMAX]]</var></th>
<td xml:space="preserve">Max age priority</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[PRIORITY parameter|PRIORITY]]</var></th>
<td xml:space="preserve">User priority</td>
<td xml:space="preserve">User n parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[PRIVDEF parameter|PRIVDEF]]</var></th>
<td xml:space="preserve">Default file privileges</td>
<td xml:space="preserve">File manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[PROMPT parameter|PROMPT]]</var></th>
<td xml:space="preserve">Prompt control</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[PUPDTH parameter|PUPDTH]]</var></th>
<td xml:space="preserve">Procedure update hash value [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[PWDEXP parameter|PWDEXP]]</var></th>
<td xml:space="preserve">Password expiration days</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[PWDPURGE parameter|PWDPURGE]]</var></th>
<td xml:space="preserve">Password purge days</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[PWDWARN parameter|PWDWARN]]</var></th>
<td xml:space="preserve">Password warning days</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[RCVOPT parameter|RCVOPT]]</var></th>
<td xml:space="preserve">Recovery options</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[READLVL parameter|READLVL]]</var></th>
<td xml:space="preserve">Default read FLS level</td>
<td xml:space="preserve">File manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[RECLOCKO parameter|RECLOCKO]]</var></th>
<td xml:space="preserve">Record locking options [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[RECRDOPT parameter|RECRDOPT]]</var></th>
<td xml:space="preserve">Record options</td>
<td xml:space="preserve">CREATE command</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[RECSCTY parameter|RECSCTY]]</var></th>
<td xml:space="preserve">Name of file's record security field</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[RECSECID parameter|RECSECID]]</var></th>
<td xml:space="preserve">Record security id</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[RESCURR parameter|RESCURR]]</var></th>
<td xml:space="preserve">Current storage used for resident requests</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[RESHIGH parameter|RESHIGH]]</var></th>
<td xml:space="preserve">HWM for storage used for resident requests</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[RESLTHR parameter|RESLTHR]]</var></th>
<td xml:space="preserve">APSY load threshold for making request resident</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[RESPAGE parameter|RESPAGE]]</var></th>
<td xml:space="preserve">Number of resident N/QTBL ATB pages</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[RESSIZE parameter|RESSIZE]]</var></th>
<td xml:space="preserve">Maximum storage to be used for resident requests</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[RESTARTU parameter|RESTARTU]]</var></th>
<td xml:space="preserve">Restart utility flags [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">EXEC PARM field</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[RESTHRSH parameter|RESTHRSH]]</var></th>
<td xml:space="preserve">Server write threshold for making request resident</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[RETRVBUF parameter|RETRVBUF]]</var></th>
<td xml:space="preserve">Size of retrieve key buffer [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[RETRVKEY parameter|RETRVKEY]]</var></th>
<td xml:space="preserve">Retrieve PF key</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[RETRVOPT parameter|RETRVOPT]]</var></th>
<td xml:space="preserve">Retrieve key options [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[RPTCNT parameter|RPTCNT]]</var></th>
<td xml:space="preserve">Samples between performance stat lines</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SCANPARM parameter|SCANPARM]]</var></th>
<td xml:space="preserve">SirScan system flags [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SCANTIME parameter|SCANTIME]]</var></th>
<td xml:space="preserve">Maximum seconds between SirScan info messages [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SCHDOFL parameter|SCHDOFL]]</var></th>
<td xml:space="preserve">Threshold for activating subtasks</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SCHDOFLZ parameter|SCHDOFLZ]]</var></th>
<td xml:space="preserve">Threshold for activating zIIP subtasks</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SCHDOPT parameter|SCHDOPT]]</var></th>
<td xml:space="preserve">Scheduler options</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SCHDOPT1 parameter|SCHDOPT1]]</var></th>
<td xml:space="preserve">Scheduler options</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SCRNSTBL parameter|SCRNSTBL]]</var></th>
<td xml:space="preserve">STBL size for Screen objects [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SDAEMDEL parameter|SDAEMDEL]]</var></th>
<td xml:space="preserve">SDaemon swap delay (MS) [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SDAEMDEV parameter|SDAEMDEV]]</var></th>
<td xml:space="preserve">IODEV number for SDaemons [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SDEBGUIP parameter|SDEBGUIP]]</var></th>
<td xml:space="preserve">Sirius debug default GUI port number [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SDEBWRKP parameter|SDEBWRKP]]</var></th>
<td xml:space="preserve">Sirius debug default worker port number [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SDMOPT parameter|SDMOPT]]</var></th>
<td xml:space="preserve">SDaemon options [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SECPLIST parameter|SECPLIST]]</var></th>
<td xml:space="preserve">Security parameter-list name for default user</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SECTRLOG parameter|SECTRLOG]]</var></th>
<td xml:space="preserve">Security trusted login environment</td>
<td xml:space="preserve">User n parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SECTY parameter|SECTY]]</var></th>
<td xml:space="preserve">Low-level security in effect</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SELLVL parameter|SELLVL]]</var></th>
<td xml:space="preserve">Default select FLS level</td>
<td xml:space="preserve">File manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SEQOPT parameter|SEQOPT]]</var></th>
<td xml:space="preserve">Sequential processing options</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SEQPDL parameter|SEQPDL]]</var></th>
<td xml:space="preserve">Minimum PDL available for sequencer</td>
<td xml:space="preserve">User n parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SERVACTV parameter|SERVACTV]]</var></th>
<td xml:space="preserve">Current size of this server</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SERVGA parameter|SERVGA]]</var></th>
<td xml:space="preserve">Above the bar server areas</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SERVGSZ parameter|SERVGSZ]]</var></th>
<td xml:space="preserve">Above the bar server size</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SERVNSA parameter|SERVNSA]]</var></th>
<td xml:space="preserve">Non swappable server areas</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SERVNSSZ parameter|SERVNSSZ]]</var></th>
<td xml:space="preserve">Non swappable server area size</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SERVSIZE parameter|SERVSIZE]]</var></th>
<td xml:space="preserve">Maximum size of this server</td>
<td xml:space="preserve">User n parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SESDEBUG parameter|SESDEBUG]]</var></th>
<td xml:space="preserve">Session debugging flags [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SESDEFOW parameter|SESDEFOW]]</var></th>
<td xml:space="preserve">Default open wait time in seconds [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SESDEFTO parameter|SESDEFTO]]</var></th>
<td xml:space="preserve">Default session timeout seconds [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SESMAXTO parameter|SESMAXTO]]</var></th>
<td xml:space="preserve">Maximum session timeout in seconds [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SESNPRV parameter|SESNPRV]]</var></th>
<td xml:space="preserve">Maximum number of private sessions [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SESNPUB parameter|SESNPUB]]</var></th>
<td xml:space="preserve">Maximum number of public sessions [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SESOPT parameter|SESOPT]]</var></th>
<td xml:space="preserve">Session options [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SESUMAX parameter|SESUMAX]]</var></th>
<td xml:space="preserve">Maximum private sessions per user [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SIOSLICE parameter|SIOSLICE]]</var></th>
<td xml:space="preserve">Server slice - IO</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SIRAPSYF parameter|SIRAPSYF]]</var></th>
<td xml:space="preserve">Sirius APSY flags [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SIRCOMP parameter|SIRCOMP]]</var></th>
<td xml:space="preserve">Sirius compilation flags [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SIREDIT parameter|SIREDIT]]</var></th>
<td xml:space="preserve">Sirius EDIT flags [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SIRFACT parameter|SIRFACT]]</var></th>
<td xml:space="preserve">SirFact flags [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SIRFUNC parameter|SIRFUNC]]</var></th>
<td xml:space="preserve">Function table options [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">EXEC PARM field</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SIRMSG parameter|SIRMSG]]</var></th>
<td xml:space="preserve">Upper casing of msgs/parm descriptions (deprecated - use UPCASMSG) [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SIRPDLHW parameter|SIRPDLHW]]</var></th>
<td xml:space="preserve">Accurate PDL HWM calculation [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SIRPRMPT parameter|SIRPRMPT]]</var></th>
<td xml:space="preserve">Sirius full screen prompt [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SIRTERM parameter|SIRTERM]]</var></th>
<td xml:space="preserve">Sirius terminal options [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SIRTUNE parameter|SIRTUNE]]</var></th>
<td xml:space="preserve">SirTune flags [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">EXEC PARM field</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SLICEMAX parameter|SLICEMAX]]</var></th>
<td xml:space="preserve">Max age slice</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SMFLORN parameter|SMFLORN]]</var></th>
<td xml:space="preserve">SMF logout rec #</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SMFSLRN parameter|SMFSLRN]]</var></th>
<td xml:space="preserve">SMF "since last" rec #</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SMFSVC parameter|SMFSVC]]</var></th>
<td xml:space="preserve">SMF SVC # [[#Obsolete parameters|(obs)]]</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SMPLTIM parameter|SMPLTIM]]</var></th>
<td xml:space="preserve">Performance sample time</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SMTPCADD parameter|SMTPCADD]]</var></th>
<td xml:space="preserve">Default SMTP client address</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SMTPCPRT parameter|SMTPCPRT]]</var></th>
<td xml:space="preserve">Default SMTP client port</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SMTPSADD parameter|SMTPSADD]]</var></th>
<td xml:space="preserve">Default SMTP server address</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SMTPSPRT parameter|SMTPSPRT]]</var></th>
<td xml:space="preserve">Default SMTP server port</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SNAPCLS parameter|SNAPCLS]]</var></th>
<td xml:space="preserve">Class for spun-off snaps</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SNAPCTL parameter|SNAPCTL]]</var></th>
<td xml:space="preserve">Snap/dump options</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SNAPDST parameter|SNAPDST]]</var></th>
<td xml:space="preserve">Destination for spun-off snaps</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SNAPFAIL parameter|SNAPFAIL]]</var></th>
<td xml:space="preserve">Number of CCASNAP failures</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SNAPFLIM parameter|SNAPFLIM]]</var></th>
<td xml:space="preserve">0 or max snap failures allowed</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SNAPID parameter|SNAPID]]</var></th>
<td xml:space="preserve">Number of snaps so far</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SNAPLIM parameter|SNAPLIM]]</var></th>
<td xml:space="preserve">0 or max number of snaps allowed</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SNAPLIMD parameter|SNAPLIMD]]</var></th>
<td xml:space="preserve">0 or max number of occurrences of any particular snap [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SNAPPDLX parameter|SNAPPDLX]]</var></th>
<td xml:space="preserve">Snap pdl extension option</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SOCKMAX parameter|SOCKMAX]]</var></th>
<td xml:space="preserve">Maximum sockets per user [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SORTKEY parameter|SORTKEY]]</var></th>
<td xml:space="preserve">Name of file's sort key field</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SPANSIZE parameter|SPANSIZE]]</var></th>
<td xml:space="preserve">SPANSIZE for date $functions [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SPCORE parameter|SPCORE]]</var></th>
<td xml:space="preserve">Spare core reserved</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SPILLADD parameter|SPILLADD]]</var></th>
<td xml:space="preserve">Spill indicator - adds</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SPILLDEL parameter|SPILLDEL]]</var></th>
<td xml:space="preserve">Spill indicator - deletes</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SQLBSCAN parameter|SQLBSCAN]]</var></th>
<td xml:space="preserve">Max RSQL read/writes</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SQLBUFSZ parameter|SQLBUFSZ]]</var></th>
<td xml:space="preserve">Remote SQL server buffer size</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SQLCNVER parameter|SQLCNVER]]</var></th>
<td xml:space="preserve">SQL fetch option</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SQLFILE parameter|SQLFILE]]</var></th>
<td xml:space="preserve">SQL generated file names</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SQLIQBSZ parameter|SQLIQBSZ]]</var></th>
<td xml:space="preserve">SQL intrnl query buff size</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SQLLPLIM parameter|SQLLPLIM]]</var></th>
<td xml:space="preserve">SQL read/writes per slice</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SRSDEFTO parameter|SRSDEFTO]]</var></th>
<td xml:space="preserve">Default saved record set timeout [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SRSMAX parameter|SRSMAX]]</var></th>
<td xml:space="preserve">Maximum number of saved record sets [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SRSMAXTO parameter|SRSMAXTO]]</var></th>
<td xml:space="preserve">Maximum saved record set timeout [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SRSMAXUS parameter|SRSMAXUS]]</var></th>
<td xml:space="preserve">Maximum saved record sets per user [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SRSPARM parameter|SRSPARM]]</var></th>
<td xml:space="preserve">Saved record set parameters [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SRVSLICE parameter|SRVSLICE]]</var></th>
<td xml:space="preserve">Server slice - CPU</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[STEPNM parameter|STEPNM]]</var></th>
<td xml:space="preserve">Step name</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[STORCUR parameter|STORCUR]]</var></th>
<td xml:space="preserve">Current dynamic storage allocation</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[STORCURG parameter|STORCURG]]</var></th>
<td xml:space="preserve">Current mbytes ATB storage allocated</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[STORINIT parameter|STORINIT]]</var></th>
<td xml:space="preserve">Storage acquired during initialization</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[STORMAX parameter|STORMAX]]</var></th>
<td xml:space="preserve">Dynamic storage high water mark</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[STORMAXG parameter|STORMAXG]]</var></th>
<td xml:space="preserve">HWM mbytes ATB storage allocated</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[STORMXZP parameter|STORMXZP]]</var></th>
<td xml:space="preserve">HWM mbytes storage allocated with 1 MB pages</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[STORZPAG parameter|STORZPAG]]</var></th>
<td xml:space="preserve">Current mbytes storage allocated with 1 MB pages</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SUB parameter|SUB]]</var></th>
<td xml:space="preserve">Substitution control</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SVIOMAXT parameter|SVIOMAXT]]</var></th>
<td xml:space="preserve">Server tracks per user</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SYSDATE parameter|SYSDATE]]</var></th>
<td xml:space="preserve">System initial date</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SYSDINFO parameter|SYSDINFO]]</var></th>
<td xml:space="preserve">System date message</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SYSID parameter|SYSID]]</var></th>
<td xml:space="preserve">SMF system identification</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SYSOPT parameter|SYSOPT]]</var></th>
<td xml:space="preserve">System options</td>
<td xml:space="preserve">EXEC PARM field</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SYSOPT2 parameter|SYSOPT2]]</var></th>
<td xml:space="preserve">System options</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[SYSTIME parameter|SYSTIME]]</var></th>
<td xml:space="preserve">System initial time</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[TABSP parameter|TABSP]]</var></th>
<td xml:space="preserve">Tab spacing</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[TCPNAME parameter|TCPNAME]]</var></th>
<td xml:space="preserve">TCP/IP service machine name</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[TCPOPTS parameter|TCPOPTS]]</var></th>
<td xml:space="preserve">TCP options</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[TCPSERV parameter|TCPSERV]]</var></th>
<td xml:space="preserve">Name of TCP/IP server address space [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[TCPSUBSY parameter|TCPSUBSY]]</var></th>
<td xml:space="preserve">Subsystem name for TCP/IP server [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[TCPTYPE parameter|TCPTYPE]]</var></th>
<td xml:space="preserve">Type of TCP/IP server address space [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[TEMPBOP parameter|TEMPBOP]]</var></th>
<td xml:space="preserve">Number of CCATEMP pages reserved for backout data</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[TEMPCUR parameter|TEMPCUR]]</var></th>
<td xml:space="preserve">CCATEMP pages currently in use</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[TEMPCURE parameter|TEMPCURE]]</var></th>
<td xml:space="preserve">CCATEMP pages currently in use (expansion area)</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[TEMPCURS parameter|TEMPCURS]]</var></th>
<td xml:space="preserve">CCATEMP pages currently in use (small model page pool)</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[TEMPHIE parameter|TEMPHIE]]</var></th>
<td xml:space="preserve">CCATEMP HWM pages used (expansion area)</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[TEMPHIS parameter|TEMPHIS]]</var></th>
<td xml:space="preserve">CCATEMP HWM pages used (small model page pool)</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[TEMPMAX parameter|TEMPMAX]]</var></th>
<td xml:space="preserve">CCATEMP highest number of pages used</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[TEMPPAGE parameter|TEMPPAGE]]</var></th>
<td xml:space="preserve">Number of CCATEMP pages in storage</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[TEMPSIZE parameter|TEMPSIZE]]</var></th>
<td xml:space="preserve">CCATEMP size in pages</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[TERMBUF parameter|TERMBUF]]</var></th>
<td xml:space="preserve"># of full screen input buffers</td>
<td xml:space="preserve">User n parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[TERMID parameter|TERMID]]</var></th>
<td xml:space="preserve">Terminal id</td>
<td xml:space="preserve">User n parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[TERMOPT parameter|TERMOPT]]</var></th>
<td xml:space="preserve">Terminal options</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[TIMELEF parameter|TIMELEF]]</var></th>
<td xml:space="preserve">Time left before end of run</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[TIMEOUT parameter|TIMEOUT]]</var></th>
<td xml:space="preserve">Inactive thread timeout in seconds</td>
<td xml:space="preserve">User n parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[TIMESTOP parameter|TIMESTOP]]</var></th>
<td xml:space="preserve">Time allowed for termination</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[TIMESVC parameter|TIMESVC]]</var></th>
<td xml:space="preserve">CCA timing SVC #</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[TNDEV parameter|TNDEV]]</var></th>
<td xml:space="preserve">IODEV number for TNSERV threads [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[UBUFSZ parameter|UBUFSZ]]</var></th>
<td xml:space="preserve">Initial universal buffer size</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[UCPUSLIC parameter|UCPUSLIC]]</var></th>
<td xml:space="preserve">User CPU slice</td>
<td xml:space="preserve">User n parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[UDDCCC parameter|UDDCCC]]</var></th>
<td xml:space="preserve">USE DDNAME - cont char column</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[UDDLPP parameter|UDDLPP]]</var></th>
<td xml:space="preserve">USE DDNAME - lines per page</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[UDDRFM parameter|UDDRFM]]</var></th>
<td xml:space="preserve">USE DDNAME - record format</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[UFEOHASH parameter|UFEOHASH]]</var></th>
<td xml:space="preserve">Unlocked FEO hash table size</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[UFEOMISS parameter|UFEOMISS]]</var></th>
<td xml:space="preserve">Number of unlocked FEO misses</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[UIOSLIC parameter|UIOSLIC]]</var></th>
<td xml:space="preserve">User I/O slice</td>
<td xml:space="preserve">User n parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[ULTRACE parameter|ULTRACE]]</var></th>
<td xml:space="preserve">UL Trace statement flags [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[ULTRACEP parameter|ULTRACEP]]</var></th>
<td xml:space="preserve">Max UL Trace statement pages [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[UPCASMSG parameter|UPCASMSG]]</var></th>
<td xml:space="preserve">Upper casing of msgs/parm descriptions</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[UPDTID parameter|UPDTID]]</var></th>
<td xml:space="preserve">User current update id</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[UPDTLVL parameter|UPDTLVL]]</var></th>
<td xml:space="preserve">Default update FLS level</td>
<td xml:space="preserve">File manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[UPRIV parameter|UPRIV]]</var></th>
<td xml:space="preserve">User privilege bits</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[USERID parameter|USERID]]</var></th>
<td xml:space="preserve">User id</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[USLCMAX parameter|USLCMAX]]</var></th>
<td xml:space="preserve">User slice max to CSLICE</td>
<td xml:space="preserve">User n parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[USLCWAIT parameter|USLCWAIT]]</var></th>
<td xml:space="preserve">User slice wait time</td>
<td xml:space="preserve">User n parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[VDP parameter|VDP]]</var></th>
<td xml:space="preserve">Default %var decimal places</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[VERIFY parameter|VERIFY]]</var></th>
<td xml:space="preserve">Write verify</td>
<td xml:space="preserve">File manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[VERSION parameter|VERSION]]</var></th>
<td xml:space="preserve">Release of Model 204</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[VLEN parameter|VLEN]]</var></th>
<td xml:space="preserve">Default %var length</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[VMFSCHNL parameter|VMFSCHNL]]</var></th>
<td xml:space="preserve">VMCF display mode channel name</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[VMIFCHNL parameter|VMIFCHNL]]</var></th>
<td xml:space="preserve">VMCF IFAM channel name</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[VMIOCHNL parameter|VMIOCHNL]]</var></th>
<td xml:space="preserve">VMCF line mode channel name</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[VTAMNAME parameter|VTAMNAME]]</var></th>
<td xml:space="preserve">VTAM application name</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[VTAMNTO parameter|VTAMNTO]]</var></th>
<td xml:space="preserve">VTAM NTO application name</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[VTGCSSRV parameter|VTGCSSRV]]</var></th>
<td xml:space="preserve">GCS service VM for VTAM terminals</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[VTLAPSY parameter|VTLAPSY]]</var></th>
<td xml:space="preserve">Login APSY for VT75 terminals [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[VTYPE parameter|VTYPE]]</var></th>
<td xml:space="preserve">Default %var type</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[WAITSCAN parameter|WAITSCAN]]</var></th>
<td xml:space="preserve">Wait scan interval</td>
<td xml:space="preserve">System manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[WAITTIME parameter|WAITTIME]]</var></th>
<td xml:space="preserve">Wait time in seconds for a response</td>
<td xml:space="preserve">Any user</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[WEBAUDIT parameter|WEBAUDIT]]</var></th>
<td xml:space="preserve">Janus Web audit trail reduction flags [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[WEBOPT parameter|WEBOPT]]</var></th>
<td xml:space="preserve">Miscellaneous Janus Web options [[#Sirius parameters|(S)]]</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[XAUTOINC parameter|XAUTOINC]]</var></th>
<td xml:space="preserve">Number of pages for table X auto increase</td>
<td xml:space="preserve">File manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[XDMSSN parameter|XDMSSN]]</var></th>
<td xml:space="preserve">XDM subsystem</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[XHIGHPG parameter|XHIGHPG]]</var></th>
<td xml:space="preserve">Table X highest active page</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[XMEMOPT parameter|XMEMOPT]]</var></th>
<td xml:space="preserve">Cross-memory PC options</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[XMEMSVC parameter|XMEMSVC]]</var></th>
<td xml:space="preserve">Cross-memory SVC #</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[XQLEN parameter|XQLEN]]</var></th>
<td xml:space="preserve">Table X queue length</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[XRECPPG parameter|XRECPPG]]</var></th>
<td xml:space="preserve">Table X slots per page</td>
<td xml:space="preserve">CREATE command</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[XRESERVE parameter|XRESERVE]]</var></th>
<td xml:space="preserve">Table X reserve space per page</td>
<td xml:space="preserve">File manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[XREUSE parameter|XREUSE]]</var></th>
<td xml:space="preserve">Free space required to reuse table X page</td>
<td xml:space="preserve">File manager</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[XREUSED parameter|XREUSED]]</var></th>
<td xml:space="preserve">Extension slots reused in table X</td>
<td xml:space="preserve">Viewable only</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[XSIZE parameter|XSIZE]]</var></th>
<td xml:space="preserve">Pages in table X</td>
<td xml:space="preserve">CREATE command</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[ZPAGEOPT parameter|ZPAGEOPT]]</var></th>
<td xml:space="preserve">1 mb page areas</td>
<td xml:space="preserve">User 0 parameter line</td>
</tr>
<tr>
<th xml:space="preserve"><var>[[ZQMAX parameter|ZQMAX]]</var></th>
<td xml:space="preserve">Z queue max length</td>
<td xml:space="preserve">System manager</td>
</tr>
</table>
</div>

Template:MAXOND parameter subtitle

2014-08-02T01:18:04Z

DVRICKP:

Maximum ON unit recursion depth

Template:MAXOND parameter subtitle

2014-08-02T01:14:22Z

DVRICKP:

MAXOND [[List of Model 204 parameters]]

Template:MAXOND parameter subtitle

2014-08-02T01:13:30Z

DVRICKP:

MAXOND [[List of Model 204 parameters#Sirius parameters|(S)]]

MAXOND parameter

2014-08-02T01:02:47Z

DVRICKP: Created page with "{{Template:MAXOND parameter subtitle}} ==Summary== <dl> <dt>Default value <dd>8 <dt>Parameter type <dd>User <dt>Where set <dd>By any user <dt>Related products <dd>All <dt>Int..."

{{Template:MAXOND parameter subtitle}}

==Summary==
<dl>
<dt>Default value
<dd>8
<dt>Parameter type
<dd>User
<dt>Where set
<dd>By any user
<dt>Related products
<dd>All
<dt>Introduced
<dd><var class="product">Model 204 V7.6</var>
</dl>

==Description==
Defines the number of times an ON unit may be entered before the evaluation is terminated.
Once this recursion number is exceeded, M204.316 is issued.

[[Category:User parameters]]
[[Category:Parameters]]

Template:MAXOND parameter subtitle

2014-08-02T00:43:37Z

DVRICKP: Created page with "MAXOND"

MAXOND

New and updated messages in Model 204 version 7.5

2014-08-01T23:49:34Z

DVRICKP:

<div class="noautonum">__TOC__</div>

===M204.0141: BUG .. DUPLICATE FILE NAME IN CP RECORD===
Explanation: A duplicate file name was encountered while attempting to add a deferred update dataset to the file directory during recovery. This indicates a potential problem in the Model 204 software.

System Manager Response: Contact Technical Support with the following documentation:
<ul>
<li>Audit trail from the previous run</li>
<li>Journal from the previous run</li>
</ul>
Return Codes: E 0 4 AD OPR

----

===M204.0204: PARAMETER SMFSVC OBSOLETE AND NOT RESET===
'''Explanation:''' Writing records to the SMF data set no longer requires the installation of an SVC. The
SMFSVC parameter is therefore obsolete and cannot be reset.
 '''System Manager Response:''' No response required.
 '''Return Codes:''' I 0 0 AUDITMS

----

===M204.0316: Recursive ON units exceed MAXOND: Evaluation stopped===
'''Explanation:''' During evaluation, one or more ON units was entered recursively. When the number of recursions exceeded MAXOND, the evaluation was terminated.
 '''System Manager Response:''' This may indicate a logic error in the program. Inform the program author.
 '''Return Codes:''' C 4 0 AUDITER

----

===M204.0332 and M204.0336===
These messages indicate problems with the CRAM interface.
The visibility of these messages has been improved by:
<ul>
<li>writing the message to the operator and the JESLOG
<li>writing the message as an ER line in CCAAUDIT
<li>setting the return code to 80
</ul>

====M204.0332: RC ''nn'' FROM CRFS OPEN====
'''Explanation:''' The run has failed to initialize due to problems with the CRAM interface.
The possible formats of this message are:

Format 1: RC nn FROM CRFS OPEN/PUT/GET

Format 2: ECB postcode FROM CRFS PUT/GET
<ul>
<li>
Format 1 indicates that Model 204 module CRFS attempted to open channel, send a message down the channel, or receive a message from a channel. CRAM was unable to satisfy the request. The message states the return code and the
operation attempted.</li>
<li>
Format 2 indicates that Model 204 module CRFS received an unexpected post code from CRAM while attempting an I/O operation on a channel. The message states the post code and the operation attempted.
</li>
</ul>
Possible return codes include the following values:
<table>
<tr class="head"><th>Value</th> <th>Description</th>
<tr><td>4</td> <td>INVALID FUNCTION</td></tr>
<tr><td>8</td> <td>CB FORMAT ERROR</td></tr>
<tr><td>16</td> <td>(OPEN MAST) CHANNEL ALREADY OPEN</td></tr>
<tr><td>20</td> <td>(OPEN USER) NO USER LINES FREE</td></tr>
<tr><td>24</td> <td>(OPEN) SUBTASKS NOT PROPERLY OPENED</td></tr>
<tr><td>12</td> <td>(READ/WRITE) ICB NOT OPEN</td></tr>
<tr><td>16</td> <td>(READ/WRITE) OTHER TASK HAS DIED</td></tr>
<tr><td>20</td> <td>(READ/WRITE) UNEXPECTED COMMAND</td></tr>
<tr><td>28</td> <td>NOT ENOUGH STORAGE</td></tr>
<tr><td>99</td> <td>There is no SVC defined in the IGCLM244 module and the XMEMOPT ’80’ bit must be set for an SVC-less installation</td></tr>
<tr><td>110</td> <td>(VMCF WRITE) MESSAGE LIMIT EXCEEDED</td></tr>
</table>
'''System Manager Response:''' Contact Technical Support and have the audit trail available.
 '''Return Codes:''' C 80 80 AUDITER NOTERM OPR

====M204.0336: RC ''nn'' FROM CRIO OPEN====
'''Explanation:''' The run has failed to initialize due to problems with the CRAM interface.
The possible formats of this message are:

Format 1: RC nn FROM CRIO OPEN/PUT/GET

Format 2: ECB postcode FROM CRFS PUT/GET
<ul>
<li>
Format 1 indicates that Model 204 module CRIO attempted to open a channel,
send a message down a channel, or receive a message from a channel. CRAM
was unable to satisfy the request. The message states the return code and the
operation attempted. For example, the return code 16 indicates that the CRAM
channel is already open.</li>
<li>
Format 2 indicates that Model 204 module CRFS received an unexpected post
code from CRAM while attempting an I/O operation on a channel. The message
shows the post code and the operation attempted.</li>
</ul>
Possible return codes include the following values:
<table>
<tr class="head"><th>Value</th> <th>Description</th>
<tr><td>4</td> <td>INVALID FUNCTION</td></tr>
<tr><td>8</td> <td>CB FORMAT ERROR</td></tr>
<tr><td>16</td> <td>(OPEN MAST) CHANNEL ALREADY OPEN</td></tr>
<tr><td>20</td> <td>(OPEN USER) NO USER LINES FREE</td></tr>
<tr><td>24</td> <td>(OPEN) SUBTASKS NOT PROPERLY OPENED</td></tr>
<tr><td>12</td> <td>(READ/WRITE) ICB NOT OPEN</td></tr>
<tr><td>16</td> <td>(READ/WRITE) OTHER TASK HAS DIED</td></tr>
<tr><td>20</td> <td>(READ/WRITE) UNEXPECTED COMMAND</td></tr>
<tr><td>28</td> <td>NOT ENOUGH STORAGE</td></tr>
<tr><td>99</td> <td>There is no SVC defined in the IGCLM244 module and the XMEMOPT ’80’ bit must be set for an SVC-less installation</td></tr>
<tr><td>110</td> <td>(VMCF WRITE) MESSAGE LIMIT EXCEEDED</td></tr>
</table>
'''System Manager Response:''' Contact Technical Support and have the audit trail available.
 
'''Return Codes:''' C 80 80 AUDITER NOTERM OPR

----

===M204.0434: NJBUFF SET TO %C===

'''Explanation:''' TBD

----

===M204.0761: ATRPG*ASTRPPG EXCEEDS <var class="term">maxentries</var>===

'''Explanation:''' You attempted to initialize a file that was created with invalid parameters. The number of dictionary entries is determined by the product of the parameters ATRPG and ASTRPPG. The maximum allowed product is 4000 (attribute dictionary entries), or 32000 for a FILEORG=x'100' file. The INITIALIZE command is rejected.

'''Response:''' The file must be recreated. Retry the CREATE command specifying ATRPG and ASTRPPG parameter values such that the product of the two is less than <var class="term">maxentries</var>.

C 0 4 AUDITER
----

===M204.0790: FILE TOO BIG===

'''Explanation:''' The total number of records possible in Table B exceeds 342 segments for files that do not have the FILEORG X'200' bit set and 1024 segments for files that have the FILEORG X'200' bit set.
The number of potential record numbers per segment is 49,152.
The number of possible segments in Table B is calculated by the following formula:
((BSIZE * BRECPPG) / 49,152)) + (1 if remainder not 0)

If the result exceeds 342 or 1024 respectively too many segments result and MODEL 204 rejects the CREATE command.
 '''File manager response:''' Make the file smaller (by specifying a smaller BSIZE or smaller BRECPPG), or divide the file into smaller pieces and use the file group feature to process them as a single logical file.
 '''Return Codes:''' C 0 4 AUDITER
----

===M204.0797: BSIZE*BRECPPG EXCEEDS MAXIMUM VALUE===

'''Explanation:''' The product of BSIZE and BRECPPG must not exceed 16,777,216 for regular Model 204 files (which do not have the FILEORG X'200' bit set) and 50,331,648 for files that have the FILEORG X'200' bit set. These numbers specify the maximum number of records allowed in a single Model 204 file.

The CREATE or INCREASE command is rejected.
 '''File manager response:''' Retry the command, specifying values for BSIZE and BRECPPG so that BSIZE*BRECPPG does not exceed the limit. See [[Managing file and table sizes]] for more information.
 '''Return Codes:''' C 0 4 AUDITER

----

===M204.1050: CCATEMP FULL: <var class="term">operation</var> or <var class="term">pooltype</var>===
Explanation: The operation being performed required an extra page from CCATEMP, but there were no free pages available. CCATEMP is defined by the system manager and provides a set of work pages that are assigned on request to various users. If a request gets this message, it might be because some other user is holding a large number of CCATEMP pages.

The message specifies either the operation being performed, or the section ("pool") of CCATEMP that was full.

<var class="term">operation</var> can be one of:
<ul>
<li>$BLDPROC</li>
<li>"USE PROCEDURE" COMMAND</li>
<li>WHILE INITIALIZING SORT</li>
<li>FOR FRV KEYS</li>
<li>WHILE GENERATING RECORDS TO BE SORTED</li>
<li>WHILE GENERATING ORDERED INDEX SORTED RECORDS</li>
<li>WHILE PERFORMING SORT</li>
</ul>

<var class="term">pooltype</var> can be one of:
<ul>
<li>SMALL MODEL PAGE POOL</li>
<li>SMALL MODEL PAGE POOL AND EXPANSION PAGE POOL</li>
</ul>
The current request is cancelled.

If the operation was $BLDPROC or USE PROCEDURE COMMAND, then the temporary procedure that was being written is deleted, except for its very last CCATEMP page, which is retained for information purposes.

In some cases the user is restarted and, if the user was in the process of updating any files, MODEL 204 marks them physically inconsistent.

CCATEMP pages below 64K are allocated from the small model pool.
CCATEMP pages above 64K are allocated from the expansion area pool.

The <var class="term">pooltype</var> specified in the message indicates whether you exceeded the capacity of the small model pool or both the small model and expansion area pools.

Response: Notify your system manager.
System Manager response: Recover the physically inconsistent files using one of the following procedures:
<ul>
<li>Roll back/roll forward</li>
<li>File reorganization procedure described in [[File reorganization and table compaction]]</li>
<li>The RESTORE command for restoring previously dumped copies</li>
</ul>
This message is informational, but it indicates a need to increase the space allocation for CCATEMP. As the size of CCATEMP is fixed at initialization, it is necessary to bring down MODEL 204 to increase it.

Return codes: E 60 60 AUDITAD CANCEL NOTERM OPR

----

===M204.1052: LOUTPB %C TO %C===
'''Explanation:'''
LOUTPB has been increased or decreased, to the value given in the message.
With a full-screen terminal the value is 1.5 times the minimum for that model number, rounded
up to a multiple of 8.
A model 2 terminal results in a LOUTPB of 3200.
A model 5 terminal results in a LOUTPB of 5664.
If NBKPG is greater than 0, the largest allowable value for LOUTPB is PAGESZ
minus 40, so the value can be decreased for this reason.
'''User Response:''' No response is needed. This message is for information only.
 '''Return Codes:''' I 0 0 AUDITAD
----

===M204.1060: %C NOT ALLOWED WITH NON SWAPPABLE SERVERS===
'''Explanation:''' The service requested is not compatible with non-swappable servers.
'''System Manager Response:''' Remove any non-swappable server settings and restart Model 204 to repeat the service.
'''Return Codes:''' E 0 4 AUDITMS
----

===M204.1131: CAN'T <var class="term">action</var>===

'''Explanation:''' The procedure action cannot be taken for one of the following reasons:
<ul>
<li>The procedure is in use by another user.</li>
<li>The procedure is not in the file.</li>
<li>The user does not have the correct privileges to change the procedure.</li>
<li>If a RENAME or ASSIGN has been attempted, the alias might already exist.</li>
</ul>
'''Response:''' Make sure that the procedure name is spelled correctly.
If the named procedure is in use, retry the command when the procedure is no longer in use. Otherwise, arrange to place the
procedure in the file or to obtain the privileges to change the procedure.
 '''Return Codes:''' C 0 4 SUFFIX AUDITER

----
The return codes for message M204.1149 have changed.

===M204.1149: <var class="term">parameter_name</var> has been set to its minimum|maximum value: <var class="term">value</var>===

'''Explanation:''' You have attempted to reset a parameter either below the minimum or above the maximum allowed for it. Model 204 has reset the parameter to the correct minimum or maximum.
 
'''Response:''' Retry the command with a value within the correct range, or leave the value as is, since Model 204 has already reset the parameter to the correct minimum or maximum.
For PARAMETER=ESIZE, if you specify:
<ul>
<li>A zero value, which is the equivalent of Not Applicable, no pages are allocated for Table E.</li>
<li>A non-zero value, then the minimum of 20 pages allocated for Table E is enforced.</li>
</ul>
'''Return Codes:''' I 0 0 AUDITMS

----

===M204.1260: [FIELD | FIELDGROUP] WAS PREVIOUSLY DEFINED WITH DIFFERENT ATTRIBUTES, NEW [FIELD | FIELDGROUP] OPTIONS IGNORED===

Explanation: A DEFINE FIELD or a DEFINE FIELDGROUP command has attempted to define an existing field or field group with different attributes.
Response: To redefine the attributes of the field or field group, you must issue the REDEFINE FIELD or the REDEFINE FIELDGROUP command. Notify your file manager.
Return Codes: C 0 4 AUDITER
----

===M204.1307: %C LOGON REJECTED - <var class="term">reason text</var> (REASON CODE: %X)===

Explanation: The MODEL 204 3270 terminal handler has rejected a logon request from a 3270 terminal for the reason stated. The following reason codes are defined:
<ol>
<li>There are no control blocks available for new logons. Increase the number of IODEV 7 terminal definitions. The reason text is: NOT ENOUGH 3270 TERMINALS.</li>
<li>The terminal has been defined with a non-3270 transmission services profile. The LU type must be 2. The reason text is: LU TYPE NOT = 2.</li>
<li>The terminal has been defined to require definite responses to messages it sends inbound to the host. The transmission services profile must be 3. 
The reason text is: TS PROFILE NOT = 3.</li>
<li>There has been an error on this terminal. This is a retryable error. The reason text is: LOSTERM SET FOR THIS TERMINAL.</li>
<li>The terminal definition is in use. This error should not occur. The reason text is: TERMINAL ALREADY IN USE.</li>
</ol>
System Manager Response: Contact your VTAM systems programmer to correct the VTAM definition.
Return Codes: E 0 4 AD SAVE NOTERM OPR
----
===M204.1346: SERVER AREA GREATER THAN CYLINDER CAPACITY FOR THIS DEVICE. CYLINDER SIZE = <var class="term">nnn</var> BYTES.===
Explanation:
The number of bytes specified for the largest server area (SERVSIZE)
is greater than <var class="term">nnn</var>, the number of bytes contained in a cylinder for
the type of disk device on which your CCASERVR (CCASRVR for DOS) data set resides.
System Manager Response: Do one of the following:
<ul>
<li>ensure that the largest SERVSIZE value does not exceed <var class="term">nnn</var></li>
<li>place your server data sets on a type of disk device that has a
larger cylinder capacity</li>
<li>place CCASERVR in storage. (See the "CCASERVR in Storage feature" section in the <var class="book">Rocket Model 204 System Manager's Guide</var>.)</li>
</ul>
'''Return Codes:''' C 96 96 AUDITER
----
===M204.1381: (new informational message for REGENERATE)===
M204.1381 is a new informational message issued during REGENERATE to help verify that the journal data provided in CCAGEN is from the correct CCAJRNL.

The 58 bytes printed are the journal header of each journal block. (Journal headers are described in the <var class="book">Rocket System Manager’s Guide</var>, "Using System Statistics" appendix, Table A-2.)

The message has four variations, which always appear:
<ol>
<li>
M204.1381: CCAGEN: FIRST 5 CCAJRNL BLOCKS + LAST BLOCK IN HEX
Explanation: The first 58 bytes, in hex, of the first five CCAJRNL blocks and the last CCAJRNL block read from CCAGEN follow in CCAAUDIT.
</li>
<li>M204.1381: PASS1: <var class="term">hex representation of data</var></li>
<li>M204.1381: LASTB: <var class="term">hex representation of data</var></li>
<li>
M204.1381: CCAGEN BLOCK COUNT: <var class="term">nnnn</var>
Explanation: The count of CCAJRNL blocks read from CCAGEN.
</li>
</ol>
Example

This example shows the first 5 CCAJRNL blocks and the last block read from CCAGEN during pass 1 of REGENERATE.
M204.1381: CCAGEN: FIRST 5 CCAJRNL BLOCKS + LAST BLOCK IN HEX
M204.1381: PASS1: 006000020113214F155421910000000000CB...
M204.1381: PASS1: 0AD000020113214F155421910000000100CB...
M204.1381: PASS1: 07BF008A0113214F155421920000000200CB...
M204.1381: PASS1: 0B5E00020113214F155422000000000300CB...
M204.1381: PASS1: 0AAF00120113214F155422030000000400CB...
M204.1381: LASTB: 00C900020113214F155930280000337100CB...
M204.1381: CCAGEN BLOCK COUNT: <var class="term">....</var>
Response: This message is informational only; no response is required.
Return Codes: 1 0 0 AUDITAD
----

===M204.1382: Chunk size <var class="term">nn</var> used: flags=X"<var class="term">nn</var>", low=<var class="term">nn</var>, high=<var class="term">nn</var>===
Explanation: This is a debugging error message.
 
Response: No response is required.
 
Return Codes: 1 0 0 AUDITMS
----

===M204.1387: ALLOCATE failed; DDNAME=<var class="term">ddname</var>,DSNAME=<var class="term">dsname</var> could not be located===
Explanation: An attempt to allocate an existing data set, data set name=<var class="term">dsname</var>, failed because the specified dsname was not found in the catalog or the catalog could not be accessed.
M204.1387 replaces M204.1070: ALLOCATE FAILED - <var class="term">reason</var> with additional information regarding the failure of the ALLOCATE command. However, M204.1070 remains in use by Janus/TCPIP for a different purpose.
Response: Correct the data set name or ensure that the data set exists and is cataloged.
Return Codes: C 0 4 AUDITER
----

===M204.1388: CHUNK size exceeds maximum of <var class="term">nnn</var>===
On a DEFINE field command, the chunk size specified is too large.
User response: Specify a chunk size less than or equal to the maximum.
Return codes: C 0 4
----

===M204.1393: CHUNK clause not of format "CHUNK <var class="term">chunkSize</var> FOR <var class="term">chunkTarget</var>"===

'''Explanation:''' On a DEFINE FIELD, the syntax of the CHUNK clause was not in the format shown in this message.
 '''File manager response:''' Correct the DEFINE FIELD command that has the incorrect CHUNK clause syntax.
 '''Return Codes:''' C 0 4 AUDITER
----

===M204.1394: CHUNK <var class="term">chunkSize</var> VALUE INVALID: <var class="term">reason</var>===

'''Explanation:''' On a DEFINE FIELD, the value specified for the size of a CHUNK is invalid;
"reason" indicates why.
 '''File manager response:''' Correct the DEFINE FIELD command that has the invalid CHUNK size.
 '''Return Codes:''' C 0 4 AUDITER
----

===M204.1395: CHUNK target field invalid type: <var class="term">reason</var>===

'''Explanation:''' On a DEFINE FIELD, the field specified as a CHUNK target is not a field type that can be used as a chunk target, for the reason specified.
 '''File manager response:''' Correct the DEFINE FIELD command containing the invalid CHUNK target type.
 '''Return Codes:''' C 0 4 AUDITER
----

===M204.1396: CHUNK fields must be INVISIBLE ORDERED NUMERIC===

'''Explanation:''' On a DEFINE FIELD, an attempt was made to create a CHUNK field that was not INVISIBLE ORDERED NUMERIC, which is a requirement of chunk fields.
 '''File manager response:''' Correct the DEFINE FIELD command that has the invalid CHUNK target type.
 '''Return Codes:''' C 0 4 AUDITER
----

===M204.1397: A CHUNK field was defined, %F may no longer be opened with M204 releases prior to V7R5===
'''Response:''' This is an informational message. No action is required.
 '''Return Codes:''' I 0 0 AUDITMS

----

===M204.1399: Same server area defined for server above the bar and non swappable server===
Explanation: The same server table has been defined in SERVNSA and SERVGA.
 '''Response:''' Correct the SERVNSA and/or SERVGA settings.
 '''Return Codes:''' E 0 4 AUDITMS

----

===M204.1400: Server areas ATB require server swapping in memory===
Explanation: Parameters indicated that server areas ATB were used in the run where CCASERVR dataset was defined.
 '''System Manager Response:''' Either remove the server areas ATB parameters or use server swapping in memory.
 '''Return Codes:''' E 0 4 AUDITMS

----

===M204.1402: Invalid value for chunk target: <var class="term">fname</var>='<var class="term">val</var>'; values must be -999999999999999 -> 999999999999999===
Explanation: If a chunk target is any field type besides DATETIME, any value stored in it must be within the range shown in the error message.
 Response: Correct the value being stored.
 System manager response: Correct the value being stored.
 Return Codes: C 0 4 CANCEL


----

===M204.1403: Increase SERVGSZ to at least %C for required ATB server areas===
Explanation: The total size of ATB server areas is larger than the ATB server size defined in SERVGSZ.
 '''User Response:''' If the message is issued by the UTABLE command, decrease the size of the ATB server areas.
 '''System Manager Response:''' If the message is issued at initialization, either increase SERVGSZ or decrease the ATB server area size.
 '''Return Codes:''' E 80 80 AUDITAD OPR

----

===M204.1412: <var class="term">service</var> NOT ALLOWED WITH ATB SERVERS===
Explanation: The requested service is not compatible with ATB (above the bar) servers.
 System manager response: Remove the ATB server parameters and restart Model 204.
 Return Codes: E 0 4 AUDITMS

----

===M204.1433: CCAGEN: IS EMPTY ¦ CCAGEN: PERMANENT I/O ERROR===
Explanation: There were no valid records found in the journal(s) pointed to by CCAGEN, or a permanent I/O error was encountered.
 System manager response: Verify that you have the correct journal(s) for the run. If I/O errors were detected while reading in CCAGEN, the appropriate error messages will have been issued before this message. Correct the error and rerun media recovery. If the problem remains unclear, contact Technical Support and have the following documentation available:
<ul><li>Audit trail</li>
<li>Snap dump</li>
<li>UTILJ output for CCAGEN dataset</li></ul>
Return Codes: C 0 4 AUDITER

----

===M204.1489: NOT ENOUGH FILE SPACE TO CONTINUE PROCEDURE DEFINITION - %F===
Explanation: There is no room in the file to store the procedure being entered with the PROCEDURE command.

<table>
<tr><td>If…</td><td>Then Model 204…</td></tr>
<tr><td>Error occurs after the first line of procedure text has been stored</td><td>Keeps the partial procedure</td></tr>
<tr><td>You are entering the text at your terminal</td><td>Ends procedure definition immediately</td></tr>
<tr><td>Procedure text is supplied by another procedure</td><td>Flushes the remainder of the input</td></tr>
<tr><td>Procedure text is supplied in a batch input stream (CCAIN)</td><td>Flushes the remainder of the procedure text and resumes processing after the END PROCEDURE command</td></tr>
</table>

Response: Create space in the file by deleting unwanted procedures or increasing Table D with the INCREASE command. Replace the partial procedure using the PROCEDURE command, or use the EDIT command to supply the missing text.

Return Codes: C 0 4 CANCEL AUDITER

----
===M204.1587: FSCB full, IMAGE too large: LFSCB required = <var class="term">num</var>, bytes available in FSCB = <var class="term">num</var>===
Explanation: The value specified in an <var>Identify</var> statement with
the <var>Len</var> or <var>Occurs</var> option causes the size of the associated <var>Image</var> to
overflow the full screen buffer (FSCB). The FSCB is a server work area
that is used to hold a compiled Image definition.
'''Response:''' Use the <var>VIEW LFSCB</var> command to determine the current
size of the FSCB. Use the <var>UTABLE</var> command to increase the value of the
<var>LFSCB</var> parameter. Check the <var class="product">SOUL</var> request for programming errors
that might cause the value specified in the <var>Identify</var> statement to be
too large. Retry the request.
'''Return Codes: '''C 0 4 CANCEL AUDITER 

----

===M204.1589: Maximum IMAGE length is 32767: LFSCB required = <var class="term">num</var>===
Explanation: An attempt has been made to define an image greater than 32K.
'''Response:''' Redefine the image so that it is not greater than the maximum length of 32767.
'''Return Codes:''' C 0 4 CANCEL AUDITER

----
===M204.1938: REQUEST FOR SPACE IN TABLE E EXTENDS BEYOND EHIGHPG, BIT MAP PAGES ARE SCANNED FOR FREESPACE===
Explanation: A User Language request attempted to store a large object and all of the append pages in Table E have been allocated. Model 204 must scan the bit map pages for previously allocated Table E pages to look for free space to store the large object.
File manager response: The file should be reorganized to compact fragmented Table E space.
Return Codes: I 0 0
----
===M204.2126: USER'S PUSHDOWN LIST OVERFLOWED===

'''Explanation:''' The user's pushdown list is an internal stack for maintaining state information for user threads across internal Model 204 subroutines. The user pushdown list lives in each user's server. Its size requirement depends on the complexity of the command or User Language request.

This message is issued whenever Model 204 detects that pushdown list data has spilled into adjacent control structures. Because of potential corruption the user is restarted.
 '''Response:''' Increase the size of the user pushdown list by using the LPDLST parameter of the UTABLE command. Notify your system manager.
 '''System Manager Response:''' If this becomes a frequent occurrence, consider more permanent changes to LPDLST and SERVSIZE, since the pushdown list is a server component.
 '''Return Codes:''' C 0 4 CANCEL
----
===M204.2329: subsystem <var class="term">name</var> AT <var class="term">location name</var> UNAVAILABLE===
Explanation: The indicated subsystem at the specified node is not available for use due to one or more errors occurring at the specified node during start or login processing.
Response: Notify the system manager or try again later.
System manager response: If the subsystem is started, stop the subsystem and resolve communications errors or other errors which occurred at the specified node. After resolving error, use the START SUBSYSTEM command to make the subsystem available for general use. Check to make sure that the LOCATION parameter was set properly in the CCAIN input stream for the Online.
Return Codes: C 0 4
----
===M204.2551: {FPL|FCT PG1} IS INVALID FOR FILE: <var class="term">filename</var>===

'''Explanation:''' If the message says FPL, then the FPL (file parameter list) for the associated file is invalid. This could be the result of an incorrect DD, FILEDEF or DLBL statement.

If the message says FCT PG1, then the existence page array page is invalid.

'''File manager response:''' If the DD, FILEDEF or DLBL statement is correct and points to the correct data set, then the file must be restored from a backup.
 '''Return Codes:''' C 0 4 AUDITER
----

===M204.2651: NOT ALL THREADS PROCESSED FOR IODEV %C===
Explanation: The run is terminated because either:
<ul>
<li>The number of threads specified by NUSERS has been initialized, but there are fewer users of the specified IODEV type than expected.</li>
<li>The DUPTERM number specified by the IODEV card could not be initialized because it exceeded the number of NUSERS.</li>
</ul>
Response: Check that NUSERS matches the total of the listed IODEVs, plus one extra for USER 0. Check also the NOTERM/DUPTERM parameter for the specified IODEV card.
Return Codes: E 80 80 ER
----
===M204.2719: OPEN %C FAILED. UPDATE STATEMENTS ALREADY COMPILED, READ ONLY PRIVILEGES INSUFFICIENT===
Explanation: The OPEN or OPENC User Language statement was issued from a request to reopen a file with read-only privileges. However, that request had already been compiled with update statements against the file.
Response: In a User Language request, you cannot use the User Language OPEN or OPENC statement to reopen a file with read-only privileges, if that request contains updates statements against the same file.
Descriptor code: C 0 4 CANCEL
----
===M204.2739: PARAMETER <var class="term">parm</var> CANNOT BE RESET ON USER 0’S PARAMETER LINE: VALUE IGNORED===
Explanation: You reset parameter <var class="term">parm</var> on the User 0 parameter line, but the parameter cannot be set there. The value is ignored, the default value for this parameter remains in effect.
Response: Remove <var class="term">parm</var> from the User 0 parameters, since it will not change the value of the parameter.
Descriptor code: E 0 4 AD
----
===M204.2746: XSIZE*XRECPPG MAY NOT BE 1 NOR EXCEED 536870911===
Explanation: The product of XSIZE and XRECPPG must not exceed 16777216 times 32 minus one, or 536870911. This specifies the maximum number of extension records allowed in a single Model 204 file when using Table X. Also, setting both XRECPPG and XSIZE to 1 is invalid.
The CREATE command is rejected.
Response: Retry the command specifying values for XSIZE and XRECPPG whose product does not exceed the 526870911 limit. Refer to the <var class="book">Rocket Model 204 File Manager’s Guide </var>for more information on file sizes.
Descriptor code: C 0 4
----

===M204.2774: ANOTHER command COMMAND IS IN PROGRESS===

Explanation: An INCREASE or DECREASE command or auto increase is taking place while another INCREASE, DECREASE, or auto increase has not finished yet.
 File manager response: Repeat the command after the completion of the auto increase or previous INCREASE or DECREASE command.
 Descriptor code: C 0 4

----

===M204.2826: %F VERSION IS PRE 6.3. COMPACTION NOT ALLOWED===

'''Explanation:''' An attempt was made to compact a file created prior to Model 204 version 6.3.
 '''File manager response:''' Reorganize the file using Model 204 version 6.3.
 '''Return Codes:''' C 0 4 AUDITER

----

===M204.2831: UPDATES TO DTS FILES NOT SUPPORTED IN THIS ENVIRONMENT===
Explanation: DTS files cannot be updated in IFAM, SQL, or PQO environments.
Response: Do not attempt to update DTS file.
Return Codes: C 0 4
----
===M204.2833: FIELDS CANNOT BE DEFINED IN A FILE WITH ATRPG*ASTRPPG>4000===
Return Codes: C 0 4
----
===M204.2836: VALUE OF PARAMETER %C INVALID—RESET TO %C===

'''Explanation:''' This is an informational message only.

A parameter was specified with an incorrect value. It has been reset to an internally calculated value that will accommodate other parameter settings. See the description of the parameter named to see what that calculation involves.
 '''System Manager Response:''' The parameter has been reset. No response is required.
 '''Return Codes:''' I 0 0 AUDITMS
----

===M204.2838: %C ONLY VALID IN FILEORG X’100’ FILES===
Return Codes: C 0 4
----
===M204.2839: %C IS A %C, NOT A %C===
Return Codes: C 0 4 ECHO
----
===M204.2841: REMOTE FIELDGROUPS NOT SUPPORTED===
Return Codes: C 0 4 ECHO
----
===M204.2842: INVALID CONTEXT FOR FIELDGROUP===
Return Codes: C 0 4 ECHO
----
===M204.2843: MAXIMUM FIELDGROUP ID EXCEEDED IN RECORD %R IN %F===
Return Codes: C 0 4 CANCEL
----
===M204.2844: MIX OF FIELDS AND FIELDGROUPS, NAME <nowiki>=</nowiki> ===
Return Codes: C 0 4 SUFFIX ECHO
----
===M204.2845: INVALID FIELDGROUP CONTEXT FOR %C===
Explanation: The $function was used outside of field group context.
Descriptor code:C 0 4 SUFFIX ECHO
----
===M204.2846: INVALID FIELDGROUP CONTEXT FOR %C===
Return Codes: C 0 4 CANCEL
----
===M204.2847: FIELDGROUP CONTEXT LOST IN RECORD %R IN %F===
Return Codes: C 0 4 CANCEL
----
===M204.2848: INVALID FIELDGROUP ID: %C===
Return Codes: C 0 4 CANCEL
----

===M204.2849: REQUIRED KEYWORD %C MISSING===
Return Codes: X 0 4 ECHO
----

===M204.2850: %C VALUE MISSING===
Return Codes: C 0 4
----
===M204.2851: %C VALUE "%C" TOO BIG, MUST BE <%C BYTES===
Return Codes: C 0 4
----

===M204.2852: UPDATE TO MISSING FIELDGROUP OCCURRENCE IN RECORD %R IN %F===
Return Codes: C 0 4 CANCEL
----

===M204.2853: %C NOT ALLOWED FOR EXACTLY-ONE FIELD===
Return Codes: C 0 4
----

===M204.2854: ATTEMPT TO DO %C FOR EXACTLY-ONE FIELD: %C===
Return Codes: C 0 4 CANCEL
----

===M204.2855: FIELD DEPTH+LENGTH UNREPRESENTABLE IN RECORD %R IN %F===
Return Codes: C 0 4 CANCEL
----

===M204.2856: FIELDNAME VARIABLE %C: EXPECTED %C, GOT %C===
Return Codes: C 0 4 CANCEL
----

===M204.2857: %C FIELD NOT ALLOWED FOR %C FIELD===
Return Codes: C 0 4
----

===M204.2858: FIELDGROUP CONTEXT MISMATCH BETWEEN COUNTOCCURRENCES- OF FIELD AND COUNTED FIELD===
Return Codes: C 0 4
----

===M204.2859: NEW AUTOMATIC FIELD NOT ALLOWED FOR NON-EMPTY FILE===
Return Codes: C 0 4
----

===M204.2860: FIELD %C ALREADY HAS A COUNT-OCCURRENCES-OF FIELD===
Return Codes: C 0 4
----

===M204.2861: OCCURRENCE COUNTER %C OVERFLOWED===
Return Codes: C 0 4 CANCEL
----

===M204.2862: ATTEMPT TO UPDATE AUTOMATIC FIELD %C===
Return Codes: C 0 4 SUFFIX ECHO
----

===M204.2863: ATTEMPT TO DO %C FOR AUTOMATIC FIELD: %C===
Return Codes: C 0 4 CANCEL
----

===M204.2865: ATTEMPT TO %C INVALID DATETIME VALUE: %C = %C===
Return Codes: C 0 4 CANCEL
----

===M204.2866: FILE ALREADY HAS %C FIELD===
Return Codes: C 0 4
----

===M204.2867: FIELDGROUP %C ALREADY HAS %C FIELD===
Explanation: If you try to define a second update tracker field of the same type for the same field group, you will invoke message 2867, where %C represents:
<ul>
<li>A CREATE-TIME</li>
<li>A CREATE-TIMEUTC</li>
<li>A CREATE-USER</li>
<li>AN UPDATE-TIME</li>
<li>AN UPDATE-TIMEUTC</li>
<li>AN UPDATE-USER</li>
</ul>
Return Codes: C O 4
----

M204.2868: MINLOBE MUST BE BETWEEN 0 AND %C'
Return Codes: C 0 4
----

===M204.2869: CHANGE REFUSED: MINLOBE > 0 FOR <var class="term">filename</var> FIELD <var class="term">fieldname</var>===
'''Return Codes:''' C 0 4 AUDITER
----

===M204.2870: CHANGE REFUSED: MINLOBE > 0 FOR <var class="term">filename</var> FIELD <var class="term">fieldname</var>===
'''Return Codes:''' C 0 4 CANCEL AUDITER
----

===M204.2871: FIELDGROUP CONTEXT MISMATCH BETWEEN CONCATENATION-OF FIELD AND COMPONENT FIELD'===
Return Codes: C 0 4
----

===M204.2872: CONCATENATION VALUE TOO LONG FOR FIELD %C'===
Return Codes: C 0 4 CANCEL
----

===M204.2873: CONCATENATION FIELD %C COMPONENT FIELD %C CONTAINS SEPARATOR CHARACTER'===
Return Codes: C 0 4 CANCEL
----

===M204.2874: ATTEMPT TO %C A VALUE THAT'S %C: %C===
Return Codes: C 0 4 CANCEL
----

===M204.2875: CONCATENATION LIST INVALID: %C'===
Return Codes: C 0 4
----

===M204.2876: INVALID %C VALUE: %C'===
Return Codes: C 0 4
----

===M204.2877: WITH CLAUSE INVALID: %C'===
Return Codes: C 0 4 ECHO

----

===M204.2878: WITH CLAUSE INVALID: FIELD %C IN %F %C===
Return Codes: C 0 4 CANCEL
----

===M204.2879: REMOTE ID %C MODE %C'===
Return Codes: I 0 0 SAVE NOTERM OPR

----

===M204.2880: MEMORY DATASETS CANNOT BE PART OF MULTI-DATASET FILE===
Return Codes: C 0 4

----

===M204.2881: DATA CONVERSION ERROR===
Return Codes: C 0 4 CANCEL

----

===M204.2882: Recovery journal (CCARF) version <var class="term">number</var> is not supported===
Explanation: A CCARF data set was provided as input to a recovery step, but that CCARF data set was produced by a different version of Model 204 than the version that is running recovery.
 System manager response: Correct the data set name referenced in CCARF and ensure that it was produced by the version of Model 204 that you are using to run recovery.
 Return codes: E 52 52 OPR

----

===M204.2883: Mix of journal versions in recovery CCARF===
Return codes: E 52 52 SNAP OPR

----

===M204.2884: [FIELD | FIELDGROUP] WAS PREVIOUSLY DEFINED AS A [FIELDGROUP | FIELD], NEW DEFINITION IGNORED===
Return Codes: C 0 4

----

===M204.2885: INVALID FIELDGROUP ID: <var class="term">fieldgroup</var>===
Return Codes: C 0 4 CANCEL

----

===M204.2886: FIELDGROUP ID %C ALREADY EXISTS IN RECORD %R IN %F'===
Return Codes: C 0 4

----

===M204.2903: FILEORG=X'100' IS NOT SUPPORTED DURING FLOD/FILELOAD===
Return Codes: E 0 8
----

===M204.2916: SERVNSSZ requires at least one area to be set in SERVNSA===
'''Explanation:''' When the size of a non-swappable server area is indicated, at least one non-swappable server area must be indicated in SERVNSA.
 '''Operator response:''' Correct the SERVNSA parameter setting.
 '''Return Codes:''' E 0 4 AUDITMS
----

===M204.2921: NON SWAPPABLE SERVER AREAS ARE NOT SUPPORTED IN VSE===
'''Explanation:''' Non-swappable server areas ATB are not supported in VSE.
 '''Operator response:''' Remove the parameters for non-swappable server areas.
 '''Return Codes:''' E 0 4 AUDITMS

----

===M204.2922: SERVNSA bit setting is not valid===
'''Explanation:''' The bit setting in [[SERVNSA parameter|SERVNSA]] is not valid.
 For release 7.4, valid bits are: X'02000000'
 For release 7.5, valid bits are: X'02000000', X'00800000', X'00004000', and X'00002000'
 '''Operator response:''' Correct the SERVNSA setting.
 '''Return Codes:''' E 0 4 AUDITMS
----

===M204.2933: Module version mismatch, KOMM=%C, %C=% C===
'''Return Codes:''' E 0 4 SNAP

----
===M204.2934: FILEORG X<nowiki>''200''</nowiki> not supported for hashed or sorted file organizations===
'''Explanation:''' Hashed or sorted files must be 16M files. The CREATE FILE command
is rejected.
 '''File manager response:''' Remove the conflicting FILEORG parameter and reissue CREATE FILE.
 '''Return Codes:''' E 0 4 AUDITMS

----

===M204.2935: {CHUNK|CHUNK target} FIELDS MAY NOT BE RENAMED OR DELETED===
'''File manager response:''' Do not attempt to RENAME or DELETE chunks or chunk targets.
 '''Return Codes:''' C 0 4 AUDITER

----

===M204.2936: A CHUNK FIELD OF SIZE <var class="term">nnn</var> ALREADY EXISTS FOR THIS FIELD===
'''Explanation:''' For a given CHUNK target field, duplicate chunk sizes are not permitted.
 '''File manager response:''' Correct the DEFINE FIELD that caused the message.
 '''Return Codes:''' C 0 4 AUDITER

----

===M204.2937: CHUNK SIZE: <var class="term">nnn</var> IS NOT AN INTEGRAL MULTIPLE/DIVISOR OF THE EXISTING CHUNK SIZE: <var class="term">nnn</var>===
'''Explanation:''' A CHUNK field's chunk size must be an integral multiple/divisor of all other chunk's sizes for a given chunk target.
 This message identifies the existing chunk size that conflicts with the new one.
 '''File manager response:''' Correct the DEFINE FIELD that caused the message.
 '''Return Codes:''' C 0 4 AUDITER

----

===M204.2938: YOU MAY NOT DEFINE MORE THAN 20 CHUNKS FOR A FIELD===
'''Explanation:''' A given chunk target can have at most 20 chunks defined.
 '''File manager response:''' Do not try to define more than 20 CHUNK fields for any given CHUNK target field.
 '''Return Codes:''' C 0 4 AUDITER
----

===M204.2939: %C has been set to its %C value: %C===
'''Explanation:''' TBD
 '''Return codes:''' I 0 0 AUDITMS

----

===M204.2940: Use of filename after INITIALIZE keyword discouraged because it gave different results prior to version 7.5===
'''Explanation:''' This message indicates that the format of the INITIALIZE command as entered does not conform to the syntax of:
INITIALIZE [KEEPDEF[S]]
Prior to version 7.5, it was possible to place any text on the INITIALIZE command, and if it was anything other than KEEPDEF[S], it was ignored. In version 7.5, the syntax of INITIALIZE command is checked for strict correctness.
 
If you have entered the name of the file being initialized AFTER the INITIALIZE command keyword, you can either correct the command (that is, remove the filename after the INITIALIZE command keyword) or use the MSGCTL M204.2940 command as described below so that the command can continue to work.
 '''File manager response:''' The most direct response is to correct the command to conform to the proper syntax, that is, remove extraneous strings after the INITIALIZE command keyword.
 '''System manager response:''' If the file manager has chosen to keep the filename after the INITIALIZE command keyword, and the filename is the same as the name of the file being initialized, you can have the following command executed at any time before the INITIALIZE command is executed:
MSGCTL M204.2940 NOCOUNT
This action represents a very special case for the NOCOUNT option of MSGCTL.
 
Normally, the NOCOUNT option only changes a message such that it does not increment the count of counting errors, but does not directly affect the operation which issued the error message.
 
For this message, however, setting the NOCOUNT operation indicates that this condition is to be allowed, and normal processing of the INITIALIZE command will continue.
 
Issuing the above MSGCTL command with version 7.5 of Model 204 will not present any risk of an incorrect operation of INITIALZE. The only caution to be observed is that in prior versions of Model 204, a filename after the INITIALIZE command keyword is NOT checked against the name of the file being initialized, and so the use of the filename after the INITIALIZE command keyword might be a risky practice if it is possible such a command might be used in a prior version of Model 204.
 '''Return codes:''' C 0 4 AUDITER

----

===M204.2941: FILE BEING INITIALIZED DOES NOT MATCH NAME GIVEN AFTER INITIALIZE COMMAND: %C===
'''Explanation:'''
This message indicates that the format of the INITIALIZE command as entered does not conform to the syntax of:
INITIALIZE [KEEPDEF[S]]
Prior to version 7.5, it was possible to place any text on the INITIALIZE command, and if it was anything other than KEEPDEF[S], it was ignored. In version 7.5, the syntax of INITIALIZE command is checked for strict correctness.
 
In some cases, users have entered the name of the file being initialized AFTER the INITIALIZE command keyword, but this message indicates that whatever string you entered after the INITIALIZE command keyword is not the name of the file being initialized.
 '''File manager response: '''
Correct the command. The most direct response is to correct the command to conform to the proper syntax: that is, remove extraneous strings after the INITIALIZE command keyword.
 
However, if the system manager has performed a MSGCTL M204.2940 NOCOUNT command, and you want to enter the correct filename on the INITIALIZE command, that will allow the INITIALIZE operation to proceed.
 
'''System manager response: '''
 If the file manager is unable to correct the INITIALZE command, you can have the following commands executed at any time before the INITIALIZE command is executed:
MSGCTL M204.2940 NOCOUNT
MSGCTL M204.2941 NOCOUNT
These actions represent a very special case for the NOCOUNT option of MSGCTL.
 Normally, the NOCOUNT option only changes a message such that it does not increment the count of counting errors, but it does not directly affect the operation which issued the error message.
 For this message, however, setting the NOCOUNT operation indicates that this condition is to be allowed, and normal processing of the INITIALIZE command will continue.
 Issuing MSGCTL M204.2941 NOCOUNT is not recommended, because this results in what might appear to be checking of the filename when in fact it is not checked.
 Issuing MSGCTL M204.2940 NOCOUNT does not present any risk with version 7.5 of Model 204, but, as discussed in the System Manager response section of message 2940, this practice should be done with caution.
 '''Return codes:''' C 0 4 AUDITER

----

===M204.2942: Extraneous string after field attribute list: %C===
'''Explanation:''' This message indicates that the format of the INITIALIZE command as entered for a hashed, sorted, or record security file does not conform to the syntax of:
INITIALIZE
[SORT fldName (attributes)]
[HASH fldName (attributes)]
[RECSCTY fldName (attributes)]
In particular, it indicates that some string followed the right parenthesis (')') of the attribute list.
Prior to version 7.5, nothing after the closing parenthesis was checked.
 '''File manager response:''' Correct the command. There should be no string after the right parenthesis.
 '''System manager response:''' If the file manager is unable to correct the INITIALZE command, you can have the following command executed at any time before the INITIALIZE command is executed:
MSGCTL M204.2942 NOCOUNT 
This action represents a very special case for the NOCOUNT option of MSGCTL. Normally, the NOCOUNT option only changes a message such that it does not increment the count of counting errors, but does not directly affect the operation which issued the error message.
 For this message, however, setting the NOCOUNT operation indicates that this condition is to be allowed, and normal processing of the INITIALIZE command will continue.
 Issuing MSGCTL M204.2942 NOCOUNT is not recommended, because if you issue this command the string after the right parenthesis will not be analyzed.
 '''Return codes:''' C 0 4 AUDITER

----

===M204.2943: Error using filename phrase for file %C: <var class="term">restriction</var>===
'''Explanation:''' This message indicates that the format of the INITIALIZE command as entered does not conform to the syntax of:
INITIALIZE [KEEPDEF[S]]
Prior to version 7.5, it was possible to place any text on the INITIALIZE command, and if it was anything other than KEEPDEF[S], it was ignored. In version 7.5, the syntax of INITIALIZE command is checked for strict correctness.
 
In some cases, users have entered the name of the file being initialized AFTER the INITIALIZE command keyword, but this message indicates that the syntax requires some modification for the particular file being initialized.
 '''File manager response:''' The command should be corrected; the most direct response is to correct the command to conform to the proper syntax, that is remove extraneous strings after the INITIALIZE command keyword.
However, if the system manager has performed a MSGCTL M204.2940 NOCOUNT command, you can modify the command as indicated by the <var class="term">restriction</var> shown in the M204.2943 text.
 '''System manager response:''' If the file manager is unable to correct the INITIALZE command, you can have the following commands executed at any time before the INITIALIZE command is executed:
MSGCTL M204.2940 NOCOUNT
MSGCTL M204.2943 NOCOUNT
This action represents a very special case for the NOCOUNT option of MSGCTL. Normally, the NOCOUNT option only changes a message such that it does not increment the count of counting errors, but does not directly affect the operation which issued the error message.
 
For this message, however, setting the NOCOUNT operation indicates that this condition is to be allowed, and normal processing of the INITIALIZE command will continue.
 
Issuing MSGCTL M204.2943 NOCOUNT is not recommended, because this bypasses the checking that is intended by the <var class="term">restriction</var> shown in the M204.2943 text.
 
Issuing MSGCTL M204.2940 NOCOUNT does not present any risk with version 7.5 of Model 204, but, as discussed in the system manager response for M204.2940, this practice should be done with caution.
 '''Return codes:''' C 0 4 AUDITER

----

===M204.2944: Should have end of <var class="term">cmd</var> command but instead found: <var class="term">string</var>===
'''Explanation:''' This message indicates that the format of the command indicated by cmd as entered does not conform to command syntax.
 '''User response:''' Correct the command, either by simply removing string and any following strings or else by correcting the command to conform to the proper syntax.
 '''File manager response:''' If the cmd in the M204.2944 text is INITIALIZE, this message indicates that the format of the INITIALIZE command as entered does not conform to the syntax of:
INITIALIZE [KEEPDEF[S]]
Prior to version 7.5, it was possible to place any text on the INITIALIZE command, and if the text was anything other than KEEPDEF[S], it was ignored. In version 7.5, the syntax of INITIALIZE command is checked for strict correctness.
The command should be corrected as described in the user response above.
 '''System manager response:''' If the file manager is unable to correct the INITIALZE command, you can have the following command executed at any time before the INITIALIZE command is executed:
MSGCTL M204.2944 NOCOUNT
This action represents a very special case for the NOCOUNT option of MSGCTL. Normally, the NOCOUNT option only changes a message such that it does not increment the count of counting errors, but does not directly affect the operation which issued the error message.

For this message, however, setting the NOCOUNT operation indicates that this condition is to be allowed, and normal processing of the INITIALIZE command will continue.

Issuing MSGCTL M204.2944 NOCOUNT is not recommended, because whatever string was indicated on the INITIALIZE command is not checked.
 '''Return codes:''' C 0 4 AUDITER

----

===M204.2945: Error encountered, <var class="term">cmd</var> command not performed===
'''Explanation:''' This counting error message indicates that the processing of the <var class="term">cmd</var> command was not performed. This message should be preceded by one or more messages. (If the preceding messages were not counting error messages, they might not have been displayed on the user's terminal, depending on the MSGCTL parameter setting.)
 '''User response:''' Correct any conditions indicated by the preceding messages.
 '''Return codes:''' C 0 4 AUDITER

----

===M204.2946: Error encountered, <var class="term">cmd</var> command not performed ===
'''Explanation:''' This informational message indicates that the processing of the <var class="term">cmd</var> command was not performed. This message should be preceded by one or more messages. (If the preceding messages were not counting error messages, they might not have been displayed on the user's terminal, depending on the MSGCTL parameter setting.)
 '''User response:''' Correct any conditions indicated by the preceding messages.
 '''Return codes:''' I 0 0 AUDITMS

----

===M204.2947: Module address <var class="term">address</var> length <var class="term">length</var> protected===
Explanation: This informational message is displayed during startup to show the ranges of load module protection. To see which Rocket CSECTs are being referenced, look at the module map in a snap. For more information on the load module protection facility, see the [[MODPROT parameter]] description.
 Response: No response is required.
 Return codes: 1 0 0 AUDITMS

[[#toc|Up to Contents]]

[[Category:Release notes]]

SERVNSA parameter

2014-06-17T21:29:35Z

DVRICKP:

{{Template:SERVNSA parameter subtitle}}
==Summary==
<dl>
<dt>Default value
<dd>0
<dt>Parameter type
<dd>User
<dt>Where set
<dd>On User 0's parameter line
<dt>Related products
<dd>All
<dt>Introduced
<dd><var class="product">Model 204 V7.4</var>
</dl>
==Description==
The <var>SERVNSA</var> parameter, along with the <var>SERVNSSZ</var> parameter, control non-swappable server areas that are placed above the 2G bar.
Each server table to be allocated above the bar is controlled by a bit in <var>SERVNSA</var>; if the bit is on, the corresponding server table is allocated above the bar.

The bits are:
<table class="thJustBold">
<tr><th>Bit</th><th>Server table placed above the bar</th></tr>
<tr><td><code>X'02000000'</code></td><td>FTBL</td></tr>
<tr><td><code>X'00800000'</code></td><td>GTBL — requires version 7.5 or later of <var class="product">Model 204</var>.
<tr><td><code>X'00004000'</code></td><td>NTBL — requires version 7.5 or later of <var class="product">Model 204</var>.
<tr><td><code>X'00002000'</code></td><td>QTBL — requires version 7.5 or later of <var class="product">Model 204</var>.
<tr><td><code>X'00080000'</code></td><td>STBL — requires version 7.6 or later of <var class="product">Model 204</var>.
<tr><td><code>X'00040000'</code></td><td>VTBL — requires version 7.6 or later of <var class="product">Model 204</var>.
</td></tr>
</table>
<var>[[SERVNSSZ parameter|SERVNSSZ]]</var> (server non-swappable size) is the amount of space in bytes required for the above-the-bar server tables per user. The total amount of storage allocated for non-swappable server areas equals <var>SERVNSSZ</var> rounded to 4 K and multiplied by <var>NUSERS</var>.
When sizing <var>SERVNSSZ</var>, it should accomodate the largest non-swappable table sizes that might be needed.

The <var>SERVNSA</var> parameter is new in version 7.4 of <var class="product">Model 204</var>.

For more information about server tables above the bar, see the
<var class="book">[http://docs.rocketsoftware.com/nxt/gateway.dll/RKBnew556/model%20204/v7.4/m204_v7r4_system_manager.pdf Rocket Model 204 System Manager's Guide]</var>.

[[Category:User parameters]]
[[Category:Parameters]]

CUSTOM parameter

2014-02-11T00:52:14Z

DVRICKP:

{{Template:CUSTOM parameter subtitle}}
==Summary==
<dl>
<dt>Default value
<dd>None
<dt>Parameter type
<dd>System
<dt>Where set
<dd>On User 0's parameter line or reset by the system manager
<dt>Related products
<dd>All
<dt>Introduced
<dd><var class="product">Model 204 V6.1</var> or earlier
</dl>

==Description==
The CUSTOM parameter enables special modifications by Rocket Software to standard execution. 
You do not have to enclose a single CUSTOM setting with parentheses, for example:
CUSTOM=8

Multiple values must be specified in a list and enclosed in parentheses, for example: 
CUSTOM=(1,2,3,4,6,8,9,10,11)

The current usages are:
<table>
<tr class="head"><th>Setting</th><th>Usage</th></tr>
<tr><th><var>CUSTOM=(1)</var></th>
<td>Century can be omitted on date input.</td></tr>

<tr><th><var>CUSTOM=(2)</var></th>
<td>Century is omitted on date output.</td></tr>

<tr><th><var>CUSTOM=(3)</var></th>
<td><var>[[$DAYI]]</var> should return day values 2 through 8 (instead of 1 through 7). <var>[[$DAY]]</var> should equate values 2 through 8 as Monday through Sunday, and full-length day names should be returned. Value 9 returns <code>MON-FRI</code>.</td></tr>

<tr><th><var>CUSTOM=(4)</var></th>
<td>DISPLAY FIELD fieldname defaults to
DISPLAY (DDL ABBREV) fieldname
</td></tr>

<tr><th nowrap><var>CUSTOM=(5)</var></th>
<td>Print debugging information for all MQ/204 requests.</td></tr>

<tr><th><var>CUSTOM=(6)</var></th>
<td>The <var>LOGOUT</var> message is:
M204.2628: uuuuuuuuuu aaaaaaaaaa LOGOUT yy mmm dd hh.mm
</td></tr>

<tr><th><var>CUSTOM=(7)</var></th>
<td>Obsolete as of <var class="product">Model 204</var> V7R1.0.</td></tr>

<tr><th><var>CUSTOM=(8)</var></th>
<td><var class="product">Connect*</var> clients can issue the <var>LOGIN</var> command from Remote Command Line (RCL) threads. Clients can login with a new user name without closing the current connection to start another one.</td></tr>

<tr><th><var>CUSTOM=(9)</var></th>
<td>Suppresses all output from all forms of the <var>PRIORITY</var> command.</td></tr>

<tr><th nowrap><var>CUSTOM=(10)</var></th>
<td>Allows filename entry using more than eight characters.</td></tr>

<tr><th nowrap><var>CUSTOM=(11)</var></th>
<td>Controls mixed case password support. If it is set, then mixed case passwords are allowed for both external and CCASTAT security. If it is not set, all passwords are uppercase.</td></tr>

<tr><th nowrap><var>CUSTOM=(12)</var></th>
<td>Swap order of system manager and system administrator test with external authorizer. Only available in Model 204 V7.5 and later.</td></tr>

<tr><th nowrap><var>CUSTOM=(13)</var></th>
<td>Close VSAM files even if <code>CLOSE=EOJ</code> specified.</td></tr>

<tr><th nowrap><var>CUSTOM=(14)</var></th>
<td>Require account ID (in addition to userid) on logins.</td></tr>

<tr><th nowrap><var>CUSTOM=(15)</var></th>
<td>Don't display user number on console (WTO) messages.</td></tr>

<tr><th nowrap><var>CUSTOM=(16)</var></th>
<td>Append current logon-id to the end of all DTSFN date-time fields.</td></tr>

<tr><th nowrap><var>CUSTOM=(17)</var></th>
<td>Preserves + in ASA column 1 for VBA datasets and USE PRINTER output to allow for overtyping. Line must contain + sign in column 1 followed by blank followed by anything:
PRINT '+ anything'
Note: feature is only available in V750 if zap 75Z015 is applied.
</td></tr>

<tr><th nowrap><var>CUSTOM=(31)</var></th>
<td>Extra bug checks for ordered index leaf pages.</td></tr>

<tr><th nowrap><var>CUSTOM=(32)</var></th>
<td>Extra bug checks for all ordered index pages.</td></tr>

<tr><th nowrap><var>CUSTOM=(33)</var></th>
<td>Issue a message (M204.1223) for every critical file resource wait.</td></tr>

<tr><th nowrap><var>CUSTOM=(34)</var></th>
<td>Suppress APSY load stats from the journal.</td></tr>

<tr><th nowrap><var>CUSTOM=(35)</var></th>
<td>Do not drain a subsystem when a user encounters a hard restart inside the subsystem.</td></tr>

<tr><th nowrap><var>CUSTOM=(36)</var></th>
<td>An Insert statement with occurrence number 0 should place the inserted occurrence at the start of repeatable fields in the record.</td></tr>

<tr><th nowrap><var>CUSTOM=(37)</var></th>
<td>Change M204.1076 (Do you really want to end the run) to indicate the job name rather than the location.</td></tr>

<tr><th nowrap><var>CUSTOM=(38)</var></th>
<td>Allow any (non-privileged) user to reset <var>[[LAUDIT parameter|LAUDIT]]</var>.</td></tr>

<tr><th nowrap><var>CUSTOM=(39)</var></th>
<td>Echo any <var>MSGCTL</var> command in a M204.0131 message.</td></tr>

<tr><th nowrap><var>CUSTOM=(40)</var></th>
<td>Allow field constraints (<var>UNIQUE</var>, <var>At-MOST-ONE</var>) in non-TBO (<var>[[frcvopt parameter|FRCVOPT]]</var> X'08' bit on) files.</td></tr>
</table>


====Using the CUSTOM=(1) parameter with date conversions====
If <code>CUSTOM=(1)</code> is added to the User 0 CCAIN stream or set later using the <var>RESET</var> command, the following occurs: If a CYY format is specified for conversion and only a YY input is supplied, the conversion is successfully completed by using the <var>[[CENTSPLT parameter|CENTSPLT]]</var> and <var>[[BASECENT parameter|BASECENT]]</var> parameters.

Examples

If CUSTOM=1, BASECENT=19, and CENTSPLT=95, then:
<table>
<tr class="head"><th>Print command</th> <th>Results</th></tr>
<tr><td>PRINT $DATECNV('CYYDDD','YYYYMMDD','96001'</td> <td>19960101</td></tr>
<tr><td>PRINT $DATECNV('CYYDDD','YYYYMMDD','196001'</td> <td>20960101</td></tr>
<tr><td>PRINT $DATECNV('CYYDDD','YYYYMMDD','95001'</td> <td>19950101</td></tr>
<tr><td>PRINT $DATECNV('CYYDDD','YYYYMMDD','095001'</td> <td>19950101</td></tr>
</table>

If CUSTOM=1 is omitted, BASECENT=19, and CENTSPLT=95, then:
<table>
<tr class="head"><th>Print command</th> <th>Results</th></tr>
<tr><td>PRINT $DATECNV('CYYDDD','YYYYMMDD','96001'</td> <td>******</td></tr>
<tr><td>PRINT $DATECNV('CYYDDD','YYYYMMDD','196001'</td> <td>20960101</td></tr>
<tr><td>PRINT $DATECNV('CYYDDD','YYYYMMDD','95001'</td> <td>******</td></tr>
<tr><td>PRINT $DATECNV('CYYDDD','YYYYMMDD','095001'</td> <td>19950101</td></tr>
</table>

====Using CUSTOM=(2)====
If <code>CUSTOM=(2)</code> is added to the User 0 CCAIN stream or set later using the <var>RESET</var> command, the following occurs: If a CYY-format is specified for output conversion and the C (century) indicator is zero, then C is eliminated. This C elimination is true for all $DATE… function calls.

For example:

If CUSTOM=(2) then: <code>PRINT $DATEJ(2)</code> prints <code>97.001</code>

But if CUSTOM=(2) is omitted, then <code>PRINT $DATEJ(2)</code> prints <code>097.001</code>.

====Using CUSTOM=(6)====
Using this option you can control the messages for the <var>LOGIN</var> and <var>LOGOUT</var> commands independently.
<ul>
<li>When <var>CUSTOM</var> is not set to 6, BATCH2 and IFAM2 applications cannot receive the return code from Model 204, if the command <code>MSGCTL M204.0353 NOTERM</code> is issued in the Online. Model 204 sends the return code to BATCH2 and IFAM2 User Language applications as a hidden field in the <var>LOGOUT</var> message, and the application must receive the <var>LOGOUT</var> message to obtain the return code.</li>

<li>When <var>CUSTOM</var> is set to 6, you can suppress M204.0353 and leave M204.2628 active and available for a BATCH2 or IFAM2 User Language application to receive the return code from the Online.</li>
</ul>

====Using CUSTOM=(8)====
The <code>CUSTOM=(8)</code> option lets Connect* customers use one connection for multiple users.
<ul>
<li>If <code>CUSTOM=(8)</code> is not set, RCL behaves as in releases of Model 204 before V6R1.0; users receive the following message when issuing the <var>LOGIN</var> command:
<code>M204.1035:COMMAND INVALID FROM PROCEDURE</code></li>

<li>If <code>CUSTOM=(8)</code> is set, any commands that are invalid for RCL receive the following message:
<code>M204.2597 command COMMAND INVALID FROM AN RCL THREAD</code>
</li>
</ul>

====Using CUSTOM=(9)====
The <code>CUSTOM=(9)</code> option lets you suppress all output from all forms of the <var>PRIORITY</var> command.

====Using CUSTOM=(10)====
Including <code>CUSTOM=10</code> in the <var>CCAIN</var> parameter stream enables you to specify a DDNAME longer than eight characters. The first eight characters will be used.

====Using CUSTOM=(11)====
Including <code>CUSTOM=11</code> in the <var>CCAIN</var> parameter stream enables you to specify passwords containing lowercase characters:

//CCAIN DD *
LOGADD=200,CUSTOM=11


====Using CUSTOM=(12)====
When using an external authorizer (RACF, ACF2, Top Secret), if a user issues a command that requires either system manager or system administrator privileges, Model 204 will test for system manager privileges for the logged-in user using the external authorizer and, if that fails, test for system administrator privileges. <code>CUSTOM=(12)</code> changes the order of the tests in such a case so that a user is tested for system administrator privileges before being tested for system manager privileges.

[[Category:System parameters]]
[[Category:Parameters]]

CUSTOM parameter

2014-01-14T19:15:16Z

DVRICKP:

{{Template:CUSTOM parameter subtitle}}
==Summary==
<dl>
<dt>Default value
<dd>None
<dt>Parameter type
<dd>System
<dt>Where set
<dd>On User 0's parameter line or reset by the system manager
<dt>Related products
<dd>All
<dt>Introduced
<dd><var class="product">Model 204 V6.1</var> or earlier
</dl>

==Description==
The CUSTOM parameter enables special modifications by Rocket Software to standard execution. 
You do not have to enclose a single CUSTOM setting with parentheses, for example:
CUSTOM=8

Multiple values must be specified in a list and enclosed in parentheses, for example: 
CUSTOM=(1,2,3,4,6,8,9,10,11)

The current usages are:
<table>
<tr class="head"><th>Setting</th><th>Usage</th></tr>
<tr><th><var>CUSTOM=(1)</var></th>
<td>Century can be omitted on date input.</td></tr>

<tr><th><var>CUSTOM=(2)</var></th>
<td>Century is omitted on date output.</td></tr>

<tr><th><var>CUSTOM=(3)</var></th>
<td><var>[[$DAYI]]</var> should return day values 2 through 8 (instead of 1 through 7). <var>[[$DAY]]</var> should equate values 2 through 8 as Monday through Sunday, and full-length day names should be returned. Value 9 returns <code>MON-FRI</code>.</td></tr>

<tr><th><var>CUSTOM=(4)</var></th>
<td>Display field defaults to <code>DDL ABBREV</code>.</td></tr>

<tr><th nowrap><var>CUSTOM=(5)</var></th>
<td>Print debugging information for all MQ/204 requests.</td></tr>

<tr><th><var>CUSTOM=(6)</var></th>
<td>The <var>LOGOUT</var> message is:
M204.2628: uuuuuuuuuu aaaaaaaaaa LOGOUT yy mmm dd hh.mm
</td></tr>

<tr><th><var>CUSTOM=(7)</var></th>
<td>Obsolete as of <var class="product">Model 204</var> V7R1.0.</td></tr>

<tr><th><var>CUSTOM=(8)</var></th>
<td><var class="product">Connect*</var> clients can issue the <var>LOGIN</var> command from Remote Command Line (RCL) threads. Clients can login with a new user name without closing the current connection to start another one.</td></tr>

<tr><th><var>CUSTOM=(9)</var></th>
<td>Suppresses all output from all forms of the <var>PRIORITY</var> command.</td></tr>

<tr><th nowrap><var>CUSTOM=(10)</var></th>
<td>Allows filename entry using more than eight characters.</td></tr>

<tr><th nowrap><var>CUSTOM=(11)</var></th>
<td>Controls mixed case password support. If it is set, then mixed case passwords are allowed for both external and CCASTAT security. If it is not set, all passwords are uppercase.</td></tr>

<tr><th nowrap><var>CUSTOM=(12)</var></th>
<td>Swap order of system manager and system administrator test with external authorizer. Only available in Model 204 V7.5 and later.</td></tr>

<tr><th nowrap><var>CUSTOM=(13)</var></th>
<td>Close VSAM files even if <code>CLOSE=EOJ</code> specified.</td></tr>

<tr><th nowrap><var>CUSTOM=(14)</var></th>
<td>Require account ID (in addition to userid) on logins.</td></tr>

<tr><th nowrap><var>CUSTOM=(15)</var></th>
<td>Don't display user number on console (WTO) messages.</td></tr>

<tr><th nowrap><var>CUSTOM=(16)</var></th>
<td>Allow the BLKSIZE of a new blocked sequential output dataset to be calculated by the operating system. Only available in Model 204 V7.5 and later under Z/os. </td></tr>

<tr><th nowrap><var>CUSTOM=(31)</var></th>
<td>Extra bug checks for ordered index leaf pages.</td></tr>

<tr><th nowrap><var>CUSTOM=(32)</var></th>
<td>Extra bug checks for all ordered index pages.</td></tr>

<tr><th nowrap><var>CUSTOM=(33)</var></th>
<td>Issue a message (M204.1223) for every critical file resource wait.</td></tr>

<tr><th nowrap><var>CUSTOM=(34)</var></th>
<td>Suppress APSY load stats from the journal.</td></tr>

<tr><th nowrap><var>CUSTOM=(35)</var></th>
<td>Do not drain a subsystem when a user encounters a hard restart inside the subsystem.</td></tr>

<tr><th nowrap><var>CUSTOM=(36)</var></th>
<td>An Insert statement with occurrence number 0 should place the inserted occurrence at the start of repeatable fields in the record.</td></tr>

<tr><th nowrap><var>CUSTOM=(37)</var></th>
<td>Change M204.1076 (Do you really want to end the run) to indicate the job name rather than the location.</td></tr>

<tr><th nowrap><var>CUSTOM=(38)</var></th>
<td>Allow any (non-privileged) user to reset <var>[[LAUDIT parameter|LAUDIT]]</var>.</td></tr>

<tr><th nowrap><var>CUSTOM=(39)</var></th>
<td>Echo any <var>MSGCTL</var> command in a M204.0131 message.</td></tr>

<tr><th nowrap><var>CUSTOM=(40)</var></th>
<td>Allow field constraints (<var>UNIQUE</var>, <var>At-MOST-ONE</var>) in non-TBO (<var>[[frcvopt parameter|FRCVOPT]]</var> X'08' bit on) files.</td></tr>
</table>


====Using the CUSTOM=(1) parameter with date conversions====
If <code>CUSTOM=(1)</code> is added to the User 0 CCAIN stream or set later using the <var>RESET</var> command, the following occurs: If a CYY format is specified for conversion and only a YY input is supplied, the conversion is successfully completed by using the <var>[[CENTSPLT parameter|CENTSPLT]]</var> and <var>[[BASECENT parameter|BASECENT]]</var> parameters.

Examples

If CUSTOM=1, BASECENT=19, and CENTSPLT=95, then:
<table>
<tr class="head"><th>Print command</th> <th>Results</th></tr>
<tr><td>PRINT $DATECNV('CYYDDD','YYYYMMDD','96001'</td> <td>19960101</td></tr>
<tr><td>PRINT $DATECNV('CYYDDD','YYYYMMDD','196001'</td> <td>20960101</td></tr>
<tr><td>PRINT $DATECNV('CYYDDD','YYYYMMDD','95001'</td> <td>19950101</td></tr>
<tr><td>PRINT $DATECNV('CYYDDD','YYYYMMDD','095001'</td> <td>19950101</td></tr>
</table>

If CUSTOM=1 is omitted, BASECENT=19, and CENTSPLT=95, then:
<table>
<tr class="head"><th>Print command</th> <th>Results</th></tr>
<tr><td>PRINT $DATECNV('CYYDDD','YYYYMMDD','96001'</td> <td>******</td></tr>
<tr><td>PRINT $DATECNV('CYYDDD','YYYYMMDD','196001'</td> <td>20960101</td></tr>
<tr><td>PRINT $DATECNV('CYYDDD','YYYYMMDD','95001'</td> <td>******</td></tr>
<tr><td>PRINT $DATECNV('CYYDDD','YYYYMMDD','095001'</td> <td>19950101</td></tr>
</table>

====Using CUSTOM=(2)====
If <code>CUSTOM=(2)</code> is added to the User 0 CCAIN stream or set later using the <var>RESET</var> command, the following occurs: If a CYY-format is specified for output conversion and the C (century) indicator is zero, then C is eliminated. This C elimination is true for all $DATE… function calls.

For example:

If CUSTOM=(2) then: <code>PRINT $DATEJ(2)</code> prints <code>97.001</code>

But if CUSTOM=(2) is omitted, then <code>PRINT $DATEJ(2)</code> prints <code>097.001</code>.

====Using CUSTOM=(6)====
Using this option you can control the messages for the <var>LOGIN</var> and <var>LOGOUT</var> commands independently.
<ul>
<li>When <var>CUSTOM</var> is not set to 6, BATCH2 and IFAM2 applications cannot receive the return code from Model 204, if the command <code>MSGCTL M204.0353 NOTERM</code> is issued in the Online. Model 204 sends the return code to BATCH2 and IFAM2 User Language applications as a hidden field in the <var>LOGOUT</var> message, and the application must receive the <var>LOGOUT</var> message to obtain the return code.</li>

<li>When <var>CUSTOM</var> is set to 6, you can suppress M204.0353 and leave M204.2628 active and available for a BATCH2 or IFAM2 User Language application to receive the return code from the Online.</li>
</ul>

====Using CUSTOM=(8)====
The <code>CUSTOM=(8)</code> option lets Connect* customers use one connection for multiple users.
<ul>
<li>If <code>CUSTOM=(8)</code> is not set, RCL behaves as in releases of Model 204 before V6R1.0; users receive the following message when issuing the <var>LOGIN</var> command:
<code>M204.1035:COMMAND INVALID FROM PROCEDURE</code></li>

<li>If <code>CUSTOM=(8)</code> is set, any commands that are invalid for RCL receive the following message:
<code>M204.2597 command COMMAND INVALID FROM AN RCL THREAD</code>
</li>
</ul>

====Using CUSTOM=(9)====
The <code>CUSTOM=(9)</code> option lets you suppress all output from all forms of the <var>PRIORITY</var> command.

====Using CUSTOM=(10)====
Including <code>CUSTOM=10</code> in the <var>CCAIN</var> parameter stream enables you to specify a DDNAME longer than eight characters. The first eight characters will be used.

====Using CUSTOM=(11)====
Including <code>CUSTOM=11</code> in the <var>CCAIN</var> parameter stream enables you to specify passwords containing lowercase characters:

//CCAIN DD *
LOGADD=200,CUSTOM=11


====Using CUSTOM=(12)====
When using an external authorizer (RACF, ACF2, Top Secret), if a user issues a command that requires either system manager or system administrator privileges, Model 204 will test for system manager privileges for the logged-in user using the external authorizer and, if that fails, test for system administrator privileges. <code>CUSTOM=(12)</code> changes the order of the tests in such a case so that a user is tested for system administrator privileges before being tested for system manager privileges.

====Using CUSTOM=(16)====
The <code>CUSTOM=(16)</code> option allows the Z/os operating system to calculate the optimal BLKSIZE for a NEW BLOCKED SEQUENTIAL OUTPUT dataset. In order to enable this feature, the BLKSIZE of the dataset must be omitted or specified with BLKSIZE=0. For more information, refer to the IBM manual 'DFSMS Implementing System-Managed Storage'.

[[Category:System parameters]]
[[Category:Parameters]]

CUSTOM parameter

2014-01-14T19:10:35Z

DVRICKP:

{{Template:CUSTOM parameter subtitle}}
==Summary==
<dl>
<dt>Default value
<dd>None
<dt>Parameter type
<dd>System
<dt>Where set
<dd>On User 0's parameter line or reset by the system manager
<dt>Related products
<dd>All
<dt>Introduced
<dd><var class="product">Model 204 V6.1</var> or earlier
</dl>

==Description==
The CUSTOM parameter enables special modifications by Rocket Software to standard execution. 
You do not have to enclose a single CUSTOM setting with parentheses, for example:
CUSTOM=8

Multiple values must be specified in a list and enclosed in parentheses, for example: 
CUSTOM=(1,2,3,4,6,8,9,10,11)

The current usages are:
<table>
<tr class="head"><th>Setting</th><th>Usage</th></tr>
<tr><th><var>CUSTOM=(1)</var></th>
<td>Century can be omitted on date input.</td></tr>

<tr><th><var>CUSTOM=(2)</var></th>
<td>Century is omitted on date output.</td></tr>

<tr><th><var>CUSTOM=(3)</var></th>
<td><var>[[$DAYI]]</var> should return day values 2 through 8 (instead of 1 through 7). <var>[[$DAY]]</var> should equate values 2 through 8 as Monday through Sunday, and full-length day names should be returned. Value 9 returns <code>MON-FRI</code>.</td></tr>

<tr><th><var>CUSTOM=(4)</var></th>
<td>Display field defaults to <code>DDL ABBREV</code>.</td></tr>

<tr><th nowrap><var>CUSTOM=(5)</var></th>
<td>Print debugging information for all MQ/204 requests.</td></tr>

<tr><th><var>CUSTOM=(6)</var></th>
<td>The <var>LOGOUT</var> message is:
M204.2628: uuuuuuuuuu aaaaaaaaaa LOGOUT yy mmm dd hh.mm
</td></tr>

<tr><th><var>CUSTOM=(7)</var></th>
<td>Obsolete as of <var class="product">Model 204</var> V7R1.0.</td></tr>

<tr><th><var>CUSTOM=(8)</var></th>
<td><var class="product">Connect*</var> clients can issue the <var>LOGIN</var> command from Remote Command Line (RCL) threads. Clients can login with a new user name without closing the current connection to start another one.</td></tr>

<tr><th><var>CUSTOM=(9)</var></th>
<td>Suppresses all output from all forms of the <var>PRIORITY</var> command.</td></tr>

<tr><th nowrap><var>CUSTOM=(10)</var></th>
<td>Allows filename entry using more than eight characters.</td></tr>

<tr><th nowrap><var>CUSTOM=(11)</var></th>
<td>Controls mixed case password support. If it is set, then mixed case passwords are allowed for both external and CCASTAT security. If it is not set, all passwords are uppercase.</td></tr>

<tr><th nowrap><var>CUSTOM=(12)</var></th>
<td>Swap order of system manager and system administrator test with external authorizer. Only available in Model 204 V7.5 and later.</td></tr>

<tr><th nowrap><var>CUSTOM=(13)</var></th>
<td>Close VSAM files even if <code>CLOSE=EOJ</code> specified.</td></tr>

<tr><th nowrap><var>CUSTOM=(14)</var></th>
<td>Require account ID (in addition to userid) on logins.</td></tr>

<tr><th nowrap><var>CUSTOM=(15)</var></th>
<td>Don't display user number on console (WTO) messages.</td></tr>

<tr><th nowrap><var>CUSTOM=(16)</var></th>
<td>Allow the BLKSIZE of a new blocked output dataset to be calculated by the operating system. Only available in Model 204 V7.5 and later under Z/os. </td></tr>

<tr><th nowrap><var>CUSTOM=(31)</var></th>
<td>Extra bug checks for ordered index leaf pages.</td></tr>

<tr><th nowrap><var>CUSTOM=(32)</var></th>
<td>Extra bug checks for all ordered index pages.</td></tr>

<tr><th nowrap><var>CUSTOM=(33)</var></th>
<td>Issue a message (M204.1223) for every critical file resource wait.</td></tr>

<tr><th nowrap><var>CUSTOM=(34)</var></th>
<td>Suppress APSY load stats from the journal.</td></tr>

<tr><th nowrap><var>CUSTOM=(35)</var></th>
<td>Do not drain a subsystem when a user encounters a hard restart inside the subsystem.</td></tr>

<tr><th nowrap><var>CUSTOM=(36)</var></th>
<td>An Insert statement with occurrence number 0 should place the inserted occurrence at the start of repeatable fields in the record.</td></tr>

<tr><th nowrap><var>CUSTOM=(37)</var></th>
<td>Change M204.1076 (Do you really want to end the run) to indicate the job name rather than the location.</td></tr>

<tr><th nowrap><var>CUSTOM=(38)</var></th>
<td>Allow any (non-privileged) user to reset <var>[[LAUDIT parameter|LAUDIT]]</var>.</td></tr>

<tr><th nowrap><var>CUSTOM=(39)</var></th>
<td>Echo any <var>MSGCTL</var> command in a M204.0131 message.</td></tr>

<tr><th nowrap><var>CUSTOM=(40)</var></th>
<td>Allow field constraints (<var>UNIQUE</var>, <var>At-MOST-ONE</var>) in non-TBO (<var>[[frcvopt parameter|FRCVOPT]]</var> X'08' bit on) files.</td></tr>
</table>


====Using the CUSTOM=(1) parameter with date conversions====
If <code>CUSTOM=(1)</code> is added to the User 0 CCAIN stream or set later using the <var>RESET</var> command, the following occurs: If a CYY format is specified for conversion and only a YY input is supplied, the conversion is successfully completed by using the <var>[[CENTSPLT parameter|CENTSPLT]]</var> and <var>[[BASECENT parameter|BASECENT]]</var> parameters.

Examples

If CUSTOM=1, BASECENT=19, and CENTSPLT=95, then:
<table>
<tr class="head"><th>Print command</th> <th>Results</th></tr>
<tr><td>PRINT $DATECNV('CYYDDD','YYYYMMDD','96001'</td> <td>19960101</td></tr>
<tr><td>PRINT $DATECNV('CYYDDD','YYYYMMDD','196001'</td> <td>20960101</td></tr>
<tr><td>PRINT $DATECNV('CYYDDD','YYYYMMDD','95001'</td> <td>19950101</td></tr>
<tr><td>PRINT $DATECNV('CYYDDD','YYYYMMDD','095001'</td> <td>19950101</td></tr>
</table>

If CUSTOM=1 is omitted, BASECENT=19, and CENTSPLT=95, then:
<table>
<tr class="head"><th>Print command</th> <th>Results</th></tr>
<tr><td>PRINT $DATECNV('CYYDDD','YYYYMMDD','96001'</td> <td>******</td></tr>
<tr><td>PRINT $DATECNV('CYYDDD','YYYYMMDD','196001'</td> <td>20960101</td></tr>
<tr><td>PRINT $DATECNV('CYYDDD','YYYYMMDD','95001'</td> <td>******</td></tr>
<tr><td>PRINT $DATECNV('CYYDDD','YYYYMMDD','095001'</td> <td>19950101</td></tr>
</table>

====Using CUSTOM=(2)====
If <code>CUSTOM=(2)</code> is added to the User 0 CCAIN stream or set later using the <var>RESET</var> command, the following occurs: If a CYY-format is specified for output conversion and the C (century) indicator is zero, then C is eliminated. This C elimination is true for all $DATE… function calls.

For example:

If CUSTOM=(2) then: <code>PRINT $DATEJ(2)</code> prints <code>97.001</code>

But if CUSTOM=(2) is omitted, then <code>PRINT $DATEJ(2)</code> prints <code>097.001</code>.

====Using CUSTOM=(6)====
Using this option you can control the messages for the <var>LOGIN</var> and <var>LOGOUT</var> commands independently.
<ul>
<li>When <var>CUSTOM</var> is not set to 6, BATCH2 and IFAM2 applications cannot receive the return code from Model 204, if the command <code>MSGCTL M204.0353 NOTERM</code> is issued in the Online. Model 204 sends the return code to BATCH2 and IFAM2 User Language applications as a hidden field in the <var>LOGOUT</var> message, and the application must receive the <var>LOGOUT</var> message to obtain the return code.</li>

<li>When <var>CUSTOM</var> is set to 6, you can suppress M204.0353 and leave M204.2628 active and available for a BATCH2 or IFAM2 User Language application to receive the return code from the Online.</li>
</ul>

====Using CUSTOM=(8)====
The <code>CUSTOM=(8)</code> option lets Connect* customers use one connection for multiple users.
<ul>
<li>If <code>CUSTOM=(8)</code> is not set, RCL behaves as in releases of Model 204 before V6R1.0; users receive the following message when issuing the <var>LOGIN</var> command:
<code>M204.1035:COMMAND INVALID FROM PROCEDURE</code></li>

<li>If <code>CUSTOM=(8)</code> is set, any commands that are invalid for RCL receive the following message:
<code>M204.2597 command COMMAND INVALID FROM AN RCL THREAD</code>
</li>
</ul>

====Using CUSTOM=(9)====
The <code>CUSTOM=(9)</code> option lets you suppress all output from all forms of the <var>PRIORITY</var> command.

====Using CUSTOM=(10)====
Including <code>CUSTOM=10</code> in the <var>CCAIN</var> parameter stream enables you to specify a DDNAME longer than eight characters. The first eight characters will be used.

====Using CUSTOM=(11)====
Including <code>CUSTOM=11</code> in the <var>CCAIN</var> parameter stream enables you to specify passwords containing lowercase characters:

//CCAIN DD *
LOGADD=200,CUSTOM=11


====Using CUSTOM=(12)====
When using an external authorizer (RACF, ACF2, Top Secret), if a user issues a command that requires either system manager or system administrator privileges, Model 204 will test for system manager privileges for the logged-in user using the external authorizer and, if that fails, test for system administrator privileges. <code>CUSTOM=(12)</code> changes the order of the tests in such a case so that a user is tested for system administrator privileges before being tested for system manager privileges.

====Using CUSTOM=(16)====
The <code>CUSTOM=(16)</code> option allows the Z/os operating system to calculate the optimal BLKSIZE for a NEW BLOCKED OUTPUT dataset. In order to enable this feature, the BLKSIZE of the dataset must be omitted or specified with BLKSIZE=0. For more information, refer to the IBM manual 'DFSMS Implementing System-Managed Storage'.

[[Category:System parameters]]
[[Category:Parameters]]

MSGCTL command

2013-12-16T19:20:08Z

DVRICKP:

Setting message output

==Summary==
<dl>
<dt>Privileges
<dd>System administrator
<dt>Function
<dd>Specifies the actions to be taken when <var class="product">Model 204</var> produces a particular error or informational message
</dl>

==Syntax==
MSGCTL {M204 | USER}.msg-number
[msg-option [msg-option]... ]
[CLASS={P | I | E}] [RETCODEO=online-retcode]
[RETCODEB=batch-retcode]


Where:
<table>
<tr>
<th><var>M204</var></th>
<td> specifies a standard <var class="product">Model 204</var> message.</td>
</tr>

<tr>
<th><var>USER</var></th>
<td> specifies a user message.</td>
</tr>

<tr>
<th>msg-number</th>
<td> is the four-digit number of the message.</td>
</tr>

<tr>
<th>msg-option</th>
<td> is one of the following:
<table>
<caption>MSGCTL command message options </caption>

<tr> <th>
Option
</th> <th>
Action...
</th> </tr>

<tr> <th><var>AUDITAD </var></th> <td>
Puts the specified message on the audit trail as an AD line.
</td> </tr>

<tr> <th><var>
AUDITER
</var></th> <td>
Puts the specified message on the audit trail as an ER line.
</td> </tr>

<tr> <th><var>
AUDITMS
</var></th> <td>
Puts the specified error message on the audit trail as an MS line.
</td> </tr>

<tr> <th><var>
AUDITRK
</var></th> <td>Puts the specified message on the audit as an RK line. </td> </tr>

<tr> <th><var>
COUNT
</var></th> <td>Increments, by one, the message count whenever this message is issued. If the message count exceeds the value of the ERMX parameter, the user's session and processing are stopped. </td> </tr>

<tr> <th><var>
DUMPALL
</var></th> <td>Dumps the entire <var class="product">Model 204</var> region. Provides the maximum amount of information for problem determination. </td> </tr>

<tr> <th><var>
NOACTION 
</var></th> <td>
Ignores the original option that was assigned the message and returns to main processing.
</td> </tr>

<tr> <th><var>
NOAUDIT
</var></th> <td>
Suppresses the auditing of a specific error message.
</td> </tr>

<tr> <th><var>
NOAUDITAD
</var></th> <td>Puts the specified message on the audit trail as an MS line. </td> </tr>

<tr> <th><var>
NOAUDITER
</var></th> <td>
Puts the specified message on the audit trail as an RK line.
</td> </tr>

<tr> <th><var>
NOAUDITMS
</var></th> <td>
Suppresses auditing the specified MS message.
</td> </tr>

<tr> <th><var>
NOAUDITRK
</var></th> <td>Put the specified message on the audit trail as an AD line. </td> </tr>

<tr> <th><var>
NOCOUNT
</var></th> <td>Does not increment, by one, the message count whenever this message is displayed. </td> </tr>

<tr> <th><var>NODUMP </var></th> <td>
Does not generate a dump.
</td> </tr>

<tr> <th><var>
NOOPR
</var></th> <td>Does not display the specified message on the operator's console. </td> </tr>

<tr> <th><var>
NOPREFIX
</var></th> <td>Suppresses the display of the message prefix and number. </td> </tr>

<tr> <th><var>
NOSAVE
</var></th> <td>Does not save the specified message in the message save table. The user should note that messages sent to the operator and messages that cause SNAPs are always added to the message save table, regardless of the selection of the SAVE or NOSAVE options. </td> </tr>

<tr> <th><var>
NOSNAP
</var></th> <td>Suppresses the production of a SNAP when the specified error condition occurs. </td> </tr>

<tr> <th><var> NOTERM</var></th> <td>
Does not display the specified message on the user's terminal or for single user jobs in CCAPRINT.
Note: <var class="product">Model 204</var> passes return codes back in login and logout messages; if you set the NOTERM option for login and logout messages you cannot get the return code.
</td> </tr>

<tr> <th><var>
NOUP
</var></th> <td> Reverses the effect of a previous UP option, thus returning the specified message to its original displayed format. </td> </tr>

<tr> <th><var>
OPR
</var></th> <td>Displays the specified message message on the operator's console. </td> </tr>

<tr> <th><var>
PREFIX
</var></th> <td>Displays a message prefix (M204 or USER) and message number along with the message. </td> </tr>

<tr> <th><var>
SAVE
</var></th> <td>Puts a copy of the specified message on the message save table whenever that message is issued. Use the VIEW ERRORS command to examine the saved message.</td> </tr>

<tr> <th><var>
SNAP
</var></th> <td>SNAP produces the same information as SNAPALL. </td> </tr>

<tr> <th><var>SNAPALL </var></th> <td>
The SNAP includes all allocated storage except the <var class="product">Model 204</var> load module.
</td> </tr>

<tr> <th><var>
SNAPPDL
</var></th> <td>The SNAP includes the registers, module map (alpha and address order), allocated storage map, pushdown list trace, user's server, KOMM, disk buffers containing <var class="product">Model 204</var> file pages held by the current user (maximum of 4), file directory of current file, and patch information. </td> </tr>

<tr> <th><var>
SNAPSEL n 
</var></th> <td>
SNAP includes everything in SNAPPDL as well as other items specified by n. The settings for n can be added together. For example, to output the disk buffers for Tables B and C:
MSGCTL SNAPSEL 6 </td> </tr>

<tr> <th><var>
 where n=1
</var></th> <td>
Output all Table A and FCT disk buffers for the current file and no CCATEMP disk buffers.
</td> </tr>

<tr> <th><var>
 where n=2
</var></th> <td>
Output all Table B disk buffers for the current file and no CCATEMP disk buffers.
</td> </tr>

<tr> <th><var>
 where n=4
</var></th> <td>
Output all Table C disk buffers for the current file and no CCATEMP disk buffers.
</td> </tr>

<tr> <th><var>
 where n=8
</var></th> <td>
Output all Table D disk buffers for the current file and no CCATEMP disk buffers.
</td> </tr>

<tr> <th><var>
 where n=16
</var></th> <td>
Output the disk buffers requested by the previous settings for all files open by this user and no CCATEMP disk buffers. This setting directs the buffer output and coordinates with one of the previous settings.
</td> </tr>

<tr> <th><var>
 where n=32
</var></th> <td>
Output all data structures except those which pertain to record locking, resource locking and disk buffers.
</td> </tr>

<tr> <th><var>
 where n=64
</var></th> <td>
Output those data structures which pertain to record locking and resource locking.
</td> </tr>

<tr> <th><var>
 where n=128
</var></th> <td>
Output all CCATEMP disk buffers and no <var class="product">Model 204</var> file disk buffers.
</td> </tr>

<tr> <th><var>
TERM
</var></th> <td>Causes the specified message to be displayed on the user's terminal or for single user jobs in CCAPRINT. </td> </tr>

<tr> <th><var>
UP
</var></th> <td> Forces the specified message to be displayed in upper case. </td> </tr>

</table>
</td>
</tr>

<tr>
<th><var>CLASS</var></th>
<td> parameters are used on only messages that have been suppressed in an application subsystem (APSY). The CLASS parameters have no effect on messages appearing outside of an APSY. For example, if an APSY suppresses E (error) messages, you can reset the message to I (informational). It will then appear at the user terminal. If both I and E are suppressed, you can reset it to P (prompt) and the message will appear at the terminal.
<table>
<tr>
<th><var>CLASS=P</var></th>
<td> resets the message so that it is treated as a prompting message. Since you cannot suppress the printing of prompting messages at the terminal, the message is displayed at the APSY user's terminal.
Note: <var>P</var> does not cause a prompt; it only forces the message to appear at the terminal in an APSY.
</td>
</tr>

<tr>
<th><var>CLASS=I</var></th>
<td> (informational) prevents the specified message from being printed at the terminal, within an APSY for which informational messages are suppressed.</td>
</tr>

<tr>
<th><var>CLASS=E</var></th>
<td> (error) prevents the specified message from being printed at the terminal within an APSY for which error messages are suppressed.</td>
</tr>

</table>
</td>
</tr>

<tr>
<th><var>RETCODEO</var></th>
<td> specifies a job step return code in the range 1 to 255 to be associated with the message in Online runs. The actual job step return code is the maximum return code of all messages issued.</td>
</tr>

<tr>
<th><var>RETCODEB</var></th>
<td> specifies a job step return code in the range 1 to 255 to be associated with the message in batch runs. The actual job step return code is the maximum return code of all messages issued.</td>
</tr>

</table>
See the <var class="product">Model 204</var> System Manager's Guide for a description of job step return codes. The <var class="product">Model 204</var> Messages Manual lists the job step return codes.
===Syntax notes===
A period, with no space before or after, must be specified between the message prefix, M204 or USER, and the message number.
Any number of nonconflicting options can be specified in the MSGCTL command. If conflicting options are specified, for example, PREFIX and NOPREFIX, the option specified last takes effect.
You can specify the MSGCTL command before the User 0 parameter line in the CCAIN stream. This lets you format messages displayed during initialization and recovery.
The MSGCTL message options-AUDIT, AUDITAD, AUDITMS, AUDITRK-are mutually exclusive. If you enter multiple options for a message, the last option listed is processed. 
The COUNT option is a separate process and can be used with the AUDIT, AUDITAD, AUDITMS, or AUDITRK option, as needed.
===Hierarchical evaluation of message types===
The hierarchical structure of messages types is as follows:
<ul>
<li>
The NOAUDITER option lowers an ER message to an RK message type.
</li>

<li>
The NOAUDITRK option lowers an RK message to an AD message type.
</li>

<li>
The NOAUDITAD option lowers an AD message to an MS message type.
</li>

<li>
The NOAUDITMS option lowers an MS message, so that it is not audited, as though you had used the NOAUDIT option.
</li>
</ul>
The NOAUDITxx option only processes a message of the 'xx' type. However, NOAUDIT works on any message type.
If NOAUDITxx is specified for a message that is not of type 'xx', the following message is returned:
M204.1047 NOAUDITxx IS AN INVALID PARAMETER FOR THIS MESSAGE


==Example==
The following example suppresses the display of the message prefix and number associated with the standard <var class="product">Model 204</var> password prompt:
MSGCTL M204.0347 NOPREFIX

==Usage notes==
The MSGCTL command lets the system manager change the way <var class="product">Model 204</var> processes a particular error or informational message. Changes made to a message affect all users in the Online.
You can use the MSGCTL command to change processing for either standard <var class="product">Model 204</var> messages with a <var class="product">Model 204</var> prefix or for messages with a user prefix developed by the installation. Note that you can also use the MSGCTL parameter to control the display of message prefixes as well as error and informational messages on the user's terminal. User messages are built in the MSGU module distributed with <var class="product">Model 204</var> and described in the <var class="product">Model 204</var> Installation Guide.
<var class="product">Model 204</var> handles different message event conditions in different ways. For example:
<ul>
<li>
A message can be displayed on the operator's console.
</li>

<li>
A message can be displayed on the user's terminal.
</li>

<li>
A message can be written to the journal or audit trail data set.
</li>

<li>
An error can result in the production of a SNAP. 
</li>
</ul>
For all <var class="product">Model 204</var> message event conditions, the <var class="product">Model 204</var> Messages Manual lists the error number, the text of the message, and the default action that is taken when the event occurs. 
====Understanding the NOCOUNT option====
Caution: Rocket Software strongly recommends that you do not change or suppress the COUNT option that is assigned to some messages. The User Language compiler depends on using the COUNT option to track errors in your program. If no errors can be reported, your program will seem to compile only to abend during the run. Also, the lack of messages in your <var class="product">Model 204</var> journal, audit trail, or other job output can result in the inability to trace and diagnose problems.

====How the MSGCTL command can override both the MSGCTL and DEBUGUL parameters====
If you use the MSGCTL command, and suppress the display of a message by using the NOTERM keyword, then no matter how the MSGCTL or DEBUGUL parameters are set, the message does not go to the terminal. Conversely, if you want messages displayed at the terminal, enter MSGCTL command using the following syntax:
MSGCTL {M204 | USER}.msg-number TERM

====Understanding the NOACTION option====
Error messages have a one-byte indicator that informs message processing whether the message needs to be processed and whether the message has been changed using MSGTL. If a message does not need processing, <var class="product">Model 204</var> resumes the main processing. 
Note: NOACTION has no effect on a restart or a termination message. 
[[Category: System administrator commands]]
[[Category:Commands]]

Daemon class

2013-12-03T23:12:19Z

DVRICKP:

The <var>Daemon</var> class provides a facility for issuing <var class="product">Model 204</var> commands from inside a <var class="product">User Language</var> request, simulating the calling of programs as if they were subroutines.

<var>Daemon</var> objects are much like an object-oriented version of the Sirius $COMMxx $functions (<var>[[$CommBg]]</var>, <var>[[$Command]]</var>, <var>[[$CommandL]]</var>), which use Sirius [[Sdaemons|sdaemons]] to run a command on another thread on behalf of the issuing user. <var>Daemon</var> objects offer a number of advantages over $COMMxx functions and over non-daemon program execution:

<ul>
<li>They can execute multiple calls per sdaemon login/logout sequence.
<li>From within a <var class="product">User Language</var> program, you can issue commands that ordinarily cannot be executed within that program, for example, a <var>REORG</var> (for which you typically have to exit the program and execute another procedure).
<li>From within a <var class="product">User Language</var> program, you can call a legacy application that is already packaged as a program as if it were a subroutine. Ordinarily, such a program is equivalent to a command, and it cannot be called as a subroutine. You have to switch to it and set up complex mechanisms to pass control between the two routines.
<li>You can reduce the size of your programs, gaining relief from server size limitations. Although a network service like a socket might also provide benefits comparable to those listed above, a <var>Daemon</var> object offers simplicity, both in the ability to implement and in the ease of adoption. Security-wise, there is no doubt which user is issuing the command, what subsystem that user is running, what files the user has open, what privileges the user has, etc.
<li>Data structures are more easily passed between a master and an sdaemon than over a communications connection, where every data structure has to be serialized by the sender and deserialized by the receiver.
</ul>

The <var>Daemon</var> API is implemented as a set of functions, subroutines, and properties, documented as the [[List of Daemon methods|Daemon methods]].

==Working with Daemon objects==
In this Wiki, the terms "daemon" or "daemon thread" are often used to mean "the sdaemon thread that is activated or involved when you employ or operate on a <var>Daemon</var> object." The user or thread that invokes a daemon is the "master" or "master thread." If a daemon itself invokes another daemon, both daemons have the same master, and the first daemon is the "parent" of the second. For more information about the master/parent distinction, see the <var>[[MasterNumber (Daemon property)|MasterNumber]]</var> property.

A daemon thread runs a command on behalf of the issuing user, and the thread is only available to that master user. The thread does not, for example, maintain some context and accept requests from different users. A daemon thread operates (only) synchronously: processing on the issuing thread pauses to wait for the daemon thread to run the command(s) it receives. To pass a command to a daemon, you use the <var>[[Run (Daemon function)|Run]]</var> function with the command as argument. Two examples follow for the <code>%foo</code> <var>Daemon</var> object:
%foo:Run('OPEN FILE MYPROC')

%list = %foo:Run('I REPORT') 

To have a daemon thread run multiple commands, you can specify multiple <var>[[Run (Daemon function)|Run]]</var> method calls, or you can define the commands as items in a <var>Stringlist</var>, and then specify the <var>Stringlist</var> as the argument in the <var>Run</var> method. The <var>Stringlist</var> is fed to the daemon as terminal input and executed item by item until that input runs out. For example, if the commands from the examples above were defined in that order as the items in <var>Stringlist</var> <code>%testproc</code>, the following statement would include the procedure <code>REPORT</code> from the <code>MYPROC</code> file:
%foo:run(%testproc) 

You use a <var>Stringlist</var> argument in this way to pass a <var class="product">User Language</var> request to a daemon. Note: If the code in a request you pass to a daemon in a <var>Stringlist</var> depends on being mixed case, precede your <var>Run</var> method call with a statement like the following, so the daemon thread will preserve mixed case:
%foo:run('*LOWER') 

Although a daemon thread is request-specific, <var>Daemon</var> objects do have persistence. The daemon thread waits for work as long as the <var>Daemon</var> object exists. Since the <var>Daemon</var> object can be <var>Global</var> or <var>Session</var> as well as not, its span of existence can be arbitrarily long or short, depending on how it is being used.

By default, a daemon thread does not share record locks or transactions with its master thread, and <var>Commits</var> and <var>Backouts</var> apply only to the thread that issues them. However, you can easily create daemons that share the update unit with the issuing thread. When such a daemon ([[#Transactional daemons|"Transactional daemons"]], below) commits or backs out a transaction, the issuing thread's updates are committed or backed out as well.

If a daemon thread does a user restart, the request is cancelled, but the calling thread is not also restarted. If a calling thread is logged off or restarted, its associated daemon threads are deleted. A daemon is not automatically restarted if the master restarts. The daemon does a user restart if it is processing a <var class="product">User Language</var> request that calls for terminal input, and no <var>Run</var> method input follows the end of request.

==Deleting a Daemon==
You can use the system <var>[[Object variables#Discarding explicitly|Discard]]</var> method to explicitly delete a <var>Daemon</var>. In addition to deleting the object, <var>Discard</var> causes the daemon thread to log off. If the daemon is not in a state to notice the <var>Discard</var> and shut down gracefully, it is bumped with a <var class="product">Model 204</var> user restart. This makes <var>Discard</var> instantaneous from the issuing thread level and as fast as possible from the daemon thread level.

As soon as the <var>Discard</var> returns, the count of daemons used by that master thread is reduced by one, even if the daemon hangs for some reason. The <var>[[MAXDAEM parameter|MAXDAEM]]</var> system parameter stipulates the maximum number of daemon threads per master thread.

Besides explicit <var>Discards</var>, a daemon is also deleted if its master thread is logged off or restarted. In such a case, the daemon is not automatically restarted if the master restarts.

==A Daemon example==
In the following example, the <var>Run</var> method is called three times for the <code>%speed</code> daemon. In the first two calls, the daemon executes a command that has no output object. In the final call, it executes a request and returns an <var>XmlDoc</var>. Note the use of <code>text to %list</code>, which captures to a <var>Stringlist</var> object the program submitted to the daemon:
b
%speed is object daemon
%list is object stringList
%silly is object xmlDoc
%speed = new
%speed:run('V UTABLE'):print
%speed:run('*LOWER'):print
%list = new
text to %list
b
%doc is object xmlDoc
%(daemon):getInputObject(%doc)
%doc:selectSingleNode('/outer/inner'):addAttribute('foo','bar')
%(daemon):returnObject(%doc)
end
end text
%silly = new
%silly:loadXml('<outer><inner><innest>huh?</innest></inner></outer>')
%speed:run(%list, %silly, %silly)
%silly:print
end

The example result follows:
HDRCTL X'01' HEADER CONTROL
LVTBL 3000 LENGTH OF VTBL
LNTBL 150 LENGTH OF NTBL
. . .
. . .
. . .
FIXSIZE 20392 FIXED SERVER SIZE REQUIREMENT
SERVACTV 150416 CURRENT SIZE OF THIS SERVER

<outer>
<inner foo="bar">
<innest>huh?</innest>
</inner>
</outer>


==Daemon record locking==
Prior to <var class="product">Sirius Mods</var> version 6.8, sdaemons running on behalf of other threads, via the $COMMxx functions or via <var>Daemon</var> objects, can suffer record locking conflicts with other threads in the same thread family, because they are separate update units. Two threads are in the same family if one is a synchronous child daemon of the other via a $COMMxx function or via a <var>Daemon</var> object. In addition, all families with common threads are considered to be a single family. So, if thread A is a synchronous parent of thread B, which is a synchronous parent of thread C, threads A, B, and C are all considered part of the same family. Furthermore, if in this example, thread B has two other synchronous children (via <var>Daemon</var> objects), threads D and E, then threads A, B, C, D, and E are all considered part of the same family.

As of version 6.8, only one condition remains under which two threads in the same family can suffer a record locking conflict: if they both try to update the same record, which would require both threads to have an exclusive pending update lock on the record being updated. However, even this possibility of a record locking conflict is eliminated for [[#Transactional daemons|transactional daemons]].

<var class="product">Sirius Mods</var> version 7.0 introduced support for [[#Asynchronous and Independent daemons|asynchronous and independent]] running of daemon requests. A daemon running asynchronously or independently is, at that point, no longer part of the family for the purposes of record locking. That is, an independently or asynchronously running daemon, or any of its daemons, cannot hold record locks that would conflict with its original master or any other daemons in the master's family.

Effectively, while a daemon is running independently or asynchronously, the master's family is split from the daemon's family. For example, thread A has daemon threads B, C, and D, and D has daemon threads E and F; if D runs asynchronously, then while it is running asynchronously, the family A, B, and C is considered separate from D, E, and F as far as record locking goes. Since an asynchronous request will (usually) eventually go back to waiting for its parent, at that point the families are rejoined. Since an independent request never rejoins its parent, once a family is split because a daemon is running independently, it is never rejoined.
Since a daemon thread (and its daemons) that is running asynchronously or independently leaves its family at the moment it starts running asynchronously or independently, it is possible for the <var>[[RunAsynchronously (Daemon function)|RunAsynchronously]]</var> or <var>[[RunIndependently (Daemon function)|RunIndependently]]</var> methods to fail because they would result in a record locking conflict betwee the newly split families.

==Transactional daemons==
The <var>New</var> constructor for <var>Daemon</var> objects has a <var>Boolean</var>, named parameter called <var>Transactional</var>:
%pantalaimon is object daemon
...
%pantalaimon = new(transactional=true) 

If <var>Transactional</var> is set to <code>True</code>, the master and daemon thread will share a single updating transaction. This means that if updates are performed by both the master and daemon thread, these updates are all committed or all backed out when a commit or backout is performed on either the daemon or master thread. If the master thread of a transactional daemon closes a file that was open in update mode, the transaction is committed; if the transactional daemon closes the file, the transaction is unaffected. If a transactional daemon thread is bumped, its master is also bumped.

If a thread has multiple transactional daemons, then all those daemons share a single updating transaction with the master thread. In addition, if a transactional daemon thread itself has transactional daemon threads, those threads also share a single updating transaction with the ultimate master thread. Effectively, all of a thread's transactional daemons, and all those transactional daemon's transactional daemons, and so on, make up a transactional family that shares a single updating transaction. The processing of updating transactions on a transactional daemon thread differs from other threads in these ways:

<ul>
<li>Transactional daemon threads never do an implied commit. Other threads typically do implied commits at end of request, unless inside a non-autocommit subsystem. In addition, certain operations, such as a procedure update, cause an implied commit on non-transactional daemon threads.

Of course, an explicit <var>Commit</var> or <var>Backout</var> statement run on a transactional daemon thread results in the transaction being committed or backed out, including those updates performed on the master thread or some other thread in the transactional family. 
<li>As an outgrowth of the previous item, transactional daemon threads can perform procedure updates in the middle of an updating transaction, as well as other file maintenance operations, such as field definitions.
<li>Transactional daemon threads cannot perform <var class="product">User Language</var> updates against files that their ultimate master thread does not have open in update mode. The ultimate master thread is the thread's master or the master's master, if that thread is, itself, a transactional daemon, and so on.

The actual commit or backout is always performed on the highest level master thread in a transactional family, so that thread must have update privileges for all files in an updating transaction. One benefit of this approach is that it's possible for a daemon thread to perform some updates, go away (log off), and for the update to still not be committed. 

As noted in "[[#Daemon record locking|Daemon record locking]]" below, transactional daemons cannot suffer record locking conflicts with other threads in the family, and they can even update the same records as other threads in the transactional family. 
</ul>

==Asynchronous and Independent daemons==
<var>RunAsynchronously</var> and <var>RunIndependently</var> are daemon-spawning methods that return immediately, before their daemon has completed processing its input command:

%pantalaimon is object daemon
...
%pantalaimon = new
...
%pantalaimon:runAsynchronously(%commands)
...
%pantalaimon:runIndependently(%commands) 

The <var>ContinueAsynchronously</var> and <var>ContinueIndependently</var> methods, discussed below in [[Daemon class#ReturnToMaster in Daemons|"ReturnToMaster in Daemons"]], invoke asynchronous and independent processing in already-created daemons.

===Under RunAsynchronously===
With <var>RunAsynchronously</var>, when the daemon commands are all processed, the daemon goes back to waiting for the master to tell it what to do next. To do this, the master thread has to make sure the daemon thread has completed processing by issuing the <var>[[WaitAsynchronous (Daemon function)|WaitAsynchronous]]</var> method against the <var>Daemon</var> object:

%pantalaimon is object daemon
...
%pantalaimon:runAsynchronously(%commands)
...
%pantalaimon:waitAsynchronous 

Even if a daemon thread running asynchronously has completed processing its commands, a <var>WaitAsynchronous</var> method must be issued against the <var>Daemon</var> object before further commands can be sent to the daemon. Most methods applied to a <var>Daemon</var> object that is running asynchronously result in request cancellation. Once the daemon that had been running asynchronously has been resynched with the master thread via <var>WaitAsynchronous</var>, the master thread can treat it just as any other daemon thread and issue further <var>Open</var>, <var>Run</var>, <var>RunAsynchronous</var>, <var>RunIndependently</var>, or other methods against the daemon.

===Under RunIndependently===
With <var>RunIndependently</var>, the daemon logs off when the daemon commands are all processed. This means that a daemon thread for which <var>RunIndependently</var> is issued can no longer be controlled by its master thread (as the method name would suggest). In fact, upon return from the <var>RunIndependently</var> method, the <var>Daemon</var> object is discarded, so any further methods invoked against it would result in request cancellation.

<var>RunIndependently</var> is roughly analogous to the <var>[[$CommBg]]</var> function with some important differences:
<ul>
<li>The <var>RunIndependently</var> method allows interaction with the daemon before it does its independent processing.
<li><var>RunIndependently</var> operates on a <var>Daemon</var> object that already has a daemon thread associated with it. <var>$CommBg</var> obtains a daemon thread as part of its processing and,
if one is not available or the maximum independent/background daemons are already running, the request is enqueued.
</ul>

That <var>RunIndependently</var> already has a thread has positive and negative aspects: If the master thread wants to be sure that the daemon thread is actually running, <var>RunIndependently</var> has the preferred behavior. If the master thread doesn't care whether the request runs immediately (and in fact, would prefer that the request be run later if/when it is convenient), then <var>$CommBg</var>'s behavior is preferable. Note, however, that there is no guarantee that a request enqueued by <var>$CommBg</var> will ever be run — it is quite possible that the request remains enqueued until the Online is brought down.

Despite their similarities, <var>$CommBg</var> and <var>RunIndependently</var> use different terminology for the daemon threads. <var>$CommBg</var> refers to the threads running "in the background," while <var>RunIndependently</var> refers to them running "independently."

As alluded to above, there is a limit to the number of background or independent requests that may be running at a time. When this limit is exceeded for <var>$CommBg</var> requests (or when there are simply no daemon threads available to run the requests), the requests are enqueued, until a daemon thread is available to run the request and the limit for background/independent requests would not be exceeded.
<var>RunIndependently</var>, on the other hand, causes a request cancellation if the limit for background/independent requests is to be exceeded. <var>RunIndependently</var> cannot fail, because there are no daemon threads available since the daemon thread is assigned to the object at the time it is instantiated (with the <var>New</var> method), so <var>RunIndependently</var> does not have to allocate a daemon thread for the request.

===Thread limits===
Before <var class="product">Sirius Mods</var> 7.0, the limit for background/independent requests was one-half of, or ten fewer than, the number of daemon threads, whichever was greater. That is, if there were 10 daemon threads defined in an Online, no more than 5 of them could be running <var>$CommBg</var> requests. If there were 40 daemon threads defined, no more than 30 could be running <var>$CommBg</var> requests. Under <var class="product">Sirius Mods</var> 7.0 and later, the system parameter <var>[[MAXBG parameter|MAXBG]]</var> indicates the maximum number of simultaneously running background/independent requests that are allowed at a time. For backward compatibility with previous <var class="product">Sirius Mods</var> versions, the default value for <var>MAXBG</var> is one-half of, or ten fewer than, the number of daemon threads defined to the Online, whichever is greater.

Daemon threads running asynchronously, as well as threads that are about to run independently (but aren't yet), are counted against the master thread's <var>[[MAXDAEM parameter|MAXDAEM]]</var> limit. When a thread switches to running independently, it is no longer counted against the master's <var>MAXDAEM</var> limit.

===When to run asynchronous daemons===
<var>RunAsynchronously</var> can be used to allow a thread to do parts of large, complex tasks in parallel. The master thread could be doing some of the work at the same time a daemon thread is asynchronously doing some of it. In fact, multiple daemon threads can be running asynchronously at the same time for a given master thread. When the master thread is done with its work, it can then do a <var>WaitAsynchronous</var> for each daemon running asynchronously until all the work is completed.

If the work being run in parallel is very CPU intensive, there is not likely to be any benefit in running work asynchronously unless the Online is using multiple tasks (<var class="product">MP/204</var> authorized and <code>AMPSUBS > 0</code>). On the other hand, if the work being performed asynchronously is I/O intensive, a significant reduction in the time required to perform the work can be achieved compared to doing all the I/O serially in the master thread. Work involving network delays is an ideal candidate for running asynchronously, especially if multiple such delays are present in a batch of work.

==ReturnToMaster in Daemons==
As of <var class="product">Sirius Mods</var> 8.1, it is possible for a <var class="product">User Language</var> request to return to the master thread without terminating the <var class="product">User Language</var> program. This is done with the <var>[[ReturnToMaster (Daemon subroutine)|ReturnToMaster]]</var> method. The master thread can then tell the daemon to continue processing with the <var>[[Continue (Daemon function)|Continue]]</var> method (or the related <var>[[ContinueAsynchronously (Daemon subroutine)|ContinueAsynchronously]]</var> and <var>[[ContinueIndependently (Daemon subroutine)|ContinueIndependently]]</var> methods). Objects can be passed back and forth between the daemon and master in this exchange, allowing the master and daemon threads to communicate with each other while both are running <var class="product">User Language</var> requests.

In the following example: a daemon thread passes an <var>XmlDoc</var> indicating its current status, waits for the master thread to tell it to continue, and then extracts the next task from an <var>XmlDoc</var> sent by the master thread:
%doc is object xmlDoc
...
%doc = new
%doc:addElement('status', %status)
%(daemon):returnObject(%doc)
%(daemon):returnToMaster
%(daemon):getInputObject(%doc)
%nextTask = %doc:value('nextTask')

And here is the master thread code that receives the status <var>XmlDoc</var> and then passes the next task <var>XmlDoc</var> back to this daemon thread:
%daemon is object daemon
%doc is object xmlDoc
...
%daemon:run(%command, output=%doc)
%status = %doc:value('status')
... determine next task
%doc = new
%doc:addElement('nextTask', %nextTask)
%daemon:continue(input=%doc)


==The DaemonState enumeration==
The <var>DaemonState</var> enumeration describes the current state of a daemon thread associated with a <var>Daemon</var> object.
A newly created <var>Daemon</var> object starts in the <var>Waiting</var> state and then changes state
as certain methods are performed on it.
Certain methods are restricted to <var>Daemon</var> objects in a particular subset of
states.

The values of the <var>DaemonState</var> enumeration are:
<table>
<tr>
<th>AsynchronousFinished</th>
<td>The master thread has invoked a <var>[[RunAsynchronously (Daemon subroutine)|RunAsynchronously]]</var> or <var>[[ContinueAsynchronously (Daemon subroutine)|ContinueAsynchronously]]</var> method, and the daemon thread has completed the processing for that request. The master thread should invoke the <var>[[WaitAsynchronous (Daemon function)|WaitAsynchronous]]</var> method to return the daemon to a <var>Waiting</var> or <var>WaitingForContinue</var> state.</td>
</tr>
<tr>
<th>Lost</th>
<td>The daemon thread has been lost (restarted or BUMPed). This state is only possible on a daemon object if a daemon processing a <var>RunAsynchronously</var> request is <var>BUMP</var>ed or restarted.</td>
</tr>
<tr>
<th>RunningAsynchronously</th>
<td>The master thread has invoked a <var>RunAsynchronously</var> or <var>ContinueAsynchronously</var> method and the daemon thread has not yet completed the processing for that request.</td>
</tr>
<tr>
<th>Waiting</th>
<td>The daemon thread is at command level and is waiting for a request from the master.</td>
</tr>
<tr>
<th>WaitingForContinue</th>
<td>The daemon thread has invoked the <var>[[ReturnToMaster (Daemon subroutine)|ReturnToMaster]]</var> method and is waiting for a request from the master.</td>
</tr>
</table>

==List of Daemon methods==
The [[List of Daemon methods|"List of Daemon methods"]] shows all the class methods, with a brief description of each.

[[Category:System classes]]

Release notes for Model 204 version 7.5

2013-09-06T17:44:21Z

DVRICKP:

These release notes list the enhancements and other changes contained in Model 204 version 7.5, which is still in development.
Until the commercial release of the software, Rocket reserves the right to add to, remove, or change anything described herein.

==Overview==
These release notes contain installation and features information for the Rocket Model 204 version 7.5.0 release.
Before beginning your installation, please read through this information about product installation and changes.

==New in this release==
This section summarizes the new features and enhancements for Model 204 version 7.5.0.

===SOUL (User Language)===
The significantly enhanced, object-oriented, version of User Language is now called SOUL. All existing User Language programs will continue to work under SOUL, so User Language can be considered to be a subset of SOUL, though the name User Language is now deprecated.
<table>
<tr><th>Feature</th><th>Operating System</th>
<tr><td>Sirius object-oriented language extensions integration</td><td>z/VM, z/OS, z/VSE</td>
<tr><td>ECF statements can pass up to 60 parameters</td><td>z/VM, z/OS, z/VSE</td>
</table>

===System Management===
<table>
<tr><th>Feature</th><th>Operating System</th>
<tr><td>Writing records to the SMF data set without an SVC installed</td><td>z/VM, z/OS, z/VSE</td>
</table>

===Performance===
<table>
<tr><th>Feature</th><th>Operating System</th>
<tr><td>GTBL can be stored above the bar</td><td>z/VM, z/OS, z/VSE</td>
</table>

==Operating system requirements==
Requirements for Model 204 version 7.5.0 are still being determined.

Model 204 version 7.4.0 required the following operating system support:
<ul>
<li>For IBM z/OS: Version 1 Release 7 is sufficient for all new functionality except for the following
features:
<ul>
<li>Large (1 MB) page support requires Version 1 Release 9.
<li>Extended address volumes (EAV) requires Version 1 Release 12.
</ul>
<li>For IBM z/VM: Version 5 Release 4.0 or later
<li>For IBM z/VSE:
<ul>
<li>Version 5 Release 1 or
<li>Version 4 Release 3 or
<li>Version 4 Release 2.1 or
<li>Version 4 Release 2.0, with these program temporary fixes (PTFs) installed:
<ul>
<li>UD53436
<li>UD53437
<li>UD53438
<li>UD53439
</ul>
</ul>
</ul>

=== Hardware requirements ===
Requirements for Model 204 version 7.5.0 are still being determined.

Model 204 version 7.4.0 required the IBM z/890 or above processor, except for the following feature:

The large (1 MB) page support feature requires the IBM z10 or above processor. 

===Model 204 compatibility with operating systems===
Content in this section is still to be determined.

===Model 204 compatibility with Connect*===
All supported versions of Connect* are compatible with Model 204 version 7.5.0.
However, CLOB/BLOB support requires Connect* version 7.4.0 or higher. Use of Connect* versions earlier than version 7.4.0 to SELECT, UPDATE, or INSERT CLOB/BLOB data will fail and might produce unexpected application behavior and/or return an error.
Connect* version 7.5.0 is compatible with versions of Model 204 that are earlier than version 7.5.0.

==SOUL (User Language) enhancements==
Much of the substantial new and enhanced functionality described in the following subsections is available as a result of the acquisition of Sirius Software. The functionality that is the subject of the initial subsection, "Object oriented programming," motivates the new name for User Language, SOUL, often thought of as Simple Objective User Language.

===Object oriented programming===
As of version 7.5 of Model 204 (and backward compatible with existing User Language applications), the SOUL language is equipped with [http://en.wikipedia.org/wiki/Object-oriented_programming Object-Oriented Programming] (sometimes abbreviated O-O) capabilities comparable or superior to other contemporary object oriented languages. Formerly contained in the [[Janus SOAP User Language Interface]], you can use [[Janus SOAP ULI essentials]] as a set of entry points to the extensive SOUL O-O documentation.

===Record capacity increase===
in this version of Model 204, the record limit is increased from sixteen million records to forty-eight million records per file.

===New SOUL statements===
{{Template:User Language statements}}

===Non O-O enhancements in SOUL===
{{Template:User Language syntax enhancements}}

===External Call Facility (ECF)===
EXTERNAL CALL statements can now pass more parameters.
The maximum number of parameters that can be passed in an EXTERNAL CALL statement has been increased from 40 to 60.
The maximum value setting for ECPSIZE is increased from 1310680 to 1966020 to accommodate the extra parameters.
===REPEAT statement UNTIL option===
The REPEAT statement now supports the UNTIL option. In previous releases, only REPEAT WHILE was supported.

A REPEAT UNTIL enters the loop body prior to checking the condition.

Example:

The following program results in output of '1':

BEGIN
REPEAT WHILE %I EQ 0
%I = %I + 1
PRINT %I
END


However, the following program results in an endless print loop:

BEGIN
REPEAT UNTIL %I EQ 0
%I = %I + 1
PRINT %I
END


===New and changed classes and methods===

====New HttpRequest TranslateTable property====
The [[TranslateTable (HttpRequest property)|TranslateTable HttpRequest property]] makes it possible to set the translate table to be used for EBCDIC to ASCII translation of data in an HttpRequest object.

====New InvalidTranslateTable class====
Objects of the [[InvalidTranslateTable class|InvalidTranslateTable exception class]] are thrown when a requested system translate table cannot be found. It is currently thrown only by the [[TranslateTable (HttpRequest property)|TranslateTable HttpRequest property]].

====New bit manipulation String functions====
New bit manipulation functions [[BitClearString (String function)|BitClearString]], [[BitCountString (String function)|BitCountString]], [[BitFlipString (String function)|BitFlipString]], [[BitSetString (String function)|BitSetString]], and [[BitValueString (String function)|BitValueString]] make it easier to manipulate the bits in a string.

====New InvalidBitNumber class====
Objects of the [[InvalidBitNumber class|InvalidBitNumber exception class]] are thrown when an invalid bit number is requested by a bit manipulation function. It is currently thrown only by the <var>[[BitClearString (String function)|BitClearString]]</var>, <var>[[BitFlipString (String function)|BitFlipString]]</var>, [[BitSetString (String function)|BitSetString]], and <var>[[BitValueString (String function)|BitValueString]]</var> functions.

====New option for AppendJournalData====
The <var>QT</var> option is added to the <var>[[AppendJournalData_(Stringlist_function)#Options_parameter|AppendJournalData]]</var> method, to include QT type audit entries.

====New parameter for AddField====
The <var>Strip</var> option is added to the <var>Screen</var> class method <var>[[AddField (Screen function)|AddField]]</var> to allow suppression of leading and trailing blank removal from input fields.

===New and changed $functions===

====Former Sirius $functions====
The $functions referred to by the link below are added to SOUL as a result of the acquisition of Sirius Software:
<ul>
<li>[[List of $functions|Sirius $functions]]
</ul>

====$SNDMAIL attachment ASCII translation====
The $SNDMAIL function can now translate an attachment to ASCII before sending it.
This translation is useful if the $SNDMAIL attachment is a CLOB (CHARACTER-LARGE-OBJECT) such as a text document.

The $SNDMAIL function now accepts an optional parameter after the name of the attached object. If this parameter is set to 'C' (or to a percent variable with the value 'C'), the object in the buffer is translated to ASCII before being attached to the email.

If this parameter is not specified, the object in the buffer is sent as a binary object.

In this example:

%RC = $SNDMAIL(%SUBJECT,,%BODY,%FROM,%TO,,,,'CLOB.TXT','C')

the CLOB.TXT attachment will be translated to ASCII before being attached to the email.

==New products==
[[Sirius Software product list|These products]] are now available to Model 204 customers as separately purchased items as a result of the acquisition of Sirius Software.

==File-related enhancements==

===Repeating field groups===
[placeholder for long section to come from 7.2 rel notes]
===Increased Table B record number capacity===
Table B can now contain up to 48M possible record numbers. (The previous limit was 16M.)

Set FILEORG=X'200' at file creation time to allow for the increased record numbers.
Notes 
<ul>
<li>The limit for BSIZE remains at 16M.
 
BSIZE * BRECPPG must be less than or equal to 48M (actually decimal 50,331,648 to be exact).
 
For example, if BSIZE = 16M, BRECPPG cannot be more than 3.
</li>
<li>
FILEORG=X'200' cannot be specified for files with hash key or sorted file organization.
</li>
</ul>


==System management enhancements==

===Writing records to the SMF data set===
Having Model 204 write records to the SMF data set no longer requires the installation of an SVC.

Therefore, the <var>[[SMFSVC parameter|SMFSVC]]</var> parameter is no longer required and, if present, will be ignored and flagged with the following informational message:
M204.0204: PARAMETER SMFSVC OBSOLETE AND NOT RESET
However, the <var>[[SMFLORN parameter|SMFLORN]]</var> and <var>[[SMFSLRN parameter|SMFSLRN]]</var> parameters must still be present in CCAIN if SMF records are required.

==Performance enhancements==

===GTBL in above the bar storage===
GTBL can now be placed into non-swappable server storage area above the bar.
In order to store GTBL in ATB storage:
<ul>
<li>Increase the <var>[[SERVNSSZ parameter|SERVNSSZ]]</var> parameter by the GTBL size.
<li>Set the second byte of the <var>[[SERVNSA parameter|SERVNSA]]</var> parameter to <code>X’80’</code>, so the value of <var>SERVNSA</var> is <code>X'00800000'</code>.
</ul>
'''Note:'''
The settings for each server table above the bar are independent of each other.
So if both FTBL and GTBL are placed above the bar, then <var>SERVNSA</var> should be set to <code>X'02800000'</code>.

===NTBL,FTBL, QTBL in above the bar storage===
Needs details . . .

==MQ/204 enhancements==
Freeing MQ/204 subtasks and associated storage

The new MQDELDTP PST (pseudo subtask) checks for MQ/204 subtasks that are in a delayed detach state. MQDELDTP detaches MQ/204 subtasks that have finished their work and releases their associated storage areas.

==Other features==
===AT-MOST-ONE and field groups===
The AT-MOST-ONE attribute is now applicable to a field group definition.

===Storing and updating LOBs===
All large object data (LOBs) in a FILEORG=X’100’ file are chained. There are four bytes per Table E page overhead for chained LOBs. The pages used by a chained LOB are not contiguous.

Handling LOBs in FILEORG=X’100’ files also has the following effects:
<ul>
<li>The RESERVE clause is ignored in a LOB field ADD statement processing, as well as the STORE RECORD statement processing of fieldname=value pairs. Consequently, the CHANGE statement does not fail because of insufficient reserved space. If the CHANGE statement requires that a LOB field be extended, it is.</li>
<li>The value of the EHIGHPG parameter is always one less than the high water mark of the number of pages used to hold LOBs. (Unless none were ever added, in which case it is zero, not -1).</li>
<li>The value of the EPGSUSED parameter is always the number of pages currently being used to hold LOBs.</li>
<li>The COMPACTE command does not process FILEORG=X’100’ files, just as it does not process a file created in V6R1 or earlier. Thus, issuing a COMPACTE command for a FILEORG X’100’ file produces an error message.</li>
<li>The TABLEE command effectively does a VIEW ESIZE EHIGHPG EPGSUSED for a FILEORG X’100’ file. Consequently there are no TABLEE overhead pages in a FILEORG=X’100’ file.</li>
</ul>

===Constraint attributes===
You can set range constraints on fields using the constraint attributes. Each set of range attributes is comprised of four attributes (GE, GT, LE, LT) that you can use to establish a range for integer values, float values, or date-time stamp values. The types of range attributes are mutually exclusive. For example, you cannot define a field with the FLOAT-GE and INTEGER-LE attributes. When a range constraint is redefined, it replaces the existing field constraint.
 Note: 
The range constraints do not have to match the data type of the stored field. That is, you could have a date/time constraint for a STRING field or an integer constraint for a FLOAT field, and so on.

You can set the following constraint attributes:
<ul>
<li>date-time value</li>
<li>pattern for a field value</li>
<li>length</li>
<li>integer value</li>
</ul>

See [[Field_Design_(File_Management)#Content_Constraints|Content Constraints]] for details.

==Upward compatibility issues==
===Change to the Ordered Index layout===
Formerly all ORDERED NUMERIC fields came after all ORDERED CHARACTER fields in the Ordered Index. Now, the fields are interspersed in field code order.

===ZFIELD Image===
The [[ZFIELD Image detail V7R5|ZFIELD image]] has been updated for this release. The image is used with $LSTFLD and $FDEF function calls.

===INTERCOMM is no longer supported===
The INTERCOMM interface supports the use of Teletype and 3270 terminals in line-at-a-time mode, using the Model 204 IODEV=29 thread type.

INTERCOMM is not supported in Model 204 version 7.5.

See the <var class="book">Rocket Model 204 Terminal User's Guide</var> for a discussion of terminal interfaces.

===User PDL overflow===
The new <var>[[Release_notes_for_Model_204_version_7.5_(DRAFT)#SEQPDL_parameter|SEQPDL]]</var> parameter might require you to increase the size of the user Push Down List (using UTABLE LPDLST) by up to 3072 bytes, or more if you specify a value for SEQPDL that is larger than the 4096 default value.

==New and changed commands==


===DEFINE FIELD new COMMA option===
The <var>[[DEFINE FIELD command#comma|COMMA]]</var> option on the <var>DEFINE FIELD</var> command uses commas to separate displayed field attributes.
===UNICODE codepage 1154 for Cyrillic===
The <var>[[UNICODE command|UNICODE]]</var> command now accepts 1154 as a codepage name. This codepage has 92 Unicode characters in the range U+0400 through U+045F, representing the Basic Russion alphabet and all of the Cyrillic extensions excepting the four which have grave accents.


==Reliability enhancements==
===SEQPDL parameter===
The new <var>[[SEQPDL parameter|SEQPDL]]</var> parameter controls the amount of free space that must be present in the user's Push Down List (PDL) in order for the SOUL sequencer to proceed with the next quad code. The minimum and default value is 4096 bytes. The maximum value is 8192 bytes. SEQPDL is a user resettable parameter and can be set on the user's parameter line or reset with the UTABLE command.

Formerly 1024 bytes of PDL free space were hardcoded internally in the Model 204 core. With 1024 bytes there were edge cases where abends would break files, resulting in ERROR 2126 USER'S PUSHDOWN LIST OVERFLOWED. SEQPDL is provided to allow enough PDL space so that all of the lower level journaling routines can process error conditions without breaking files.

If your applications are using close to the amount of PDL space currently set by the LPDLST value, you might need to increase LPDLST to reflect SEQPDL's increase in free space.

==New and changed parameters==
In addition to the following specific parameter changes, <var class="product">Model 204</var> parameter descriptions, for example as displayed by the <var>VIEW</var> command, are now in mixed case (unless translated to uppercase due to <var>[[#UPCASMSG new parameter|UPCASMSG]]</var>.)


===ECPSIZE max value increase===
The maximum value setting for ECPSIZE has been increased from 1310680 to 1966020 to accommodate more [[Release_notes_for_Model_204_version_7.5_(DRAFT)#External_Call_Facility_.28ECF.29|External Call Facility]] parameters.
===FILEORG change===
The [[FILEORG_parameter|FILEORG]] X'100' setting for enhanced data handling files is available as of Model 204 version 7.5.

X'100' enables a number of enhancements to the file structure, including support for [[Support_for_repeating_field_groups|physical field groups]]; the definition of up to 32000 fields in a file; system maintained [[Field_Design_(File_Management)#Automatic_Fields|Automatic fields]]; [[Field_Design_(File_Management)#Field_Constraints|Field Constraints]] providing content validation; and improved space management of fields containing [[Field_Design_(File_Management)#BLOB.2C_CLOB_and_MINLOBE_attributes|Large Objects]].

If X'100' is selected, the X'80' bit (optimized field extraction files) is automatically set.

===MODTIM parameter (new)===
The <var>[[MODTIM parameter|MODTIM]]</var> system parameter displays the most recent assembly date and time of the Model 204 load module.

===OUTPUT=DUMMY for IODEV=3 threads===
IODEV=3 threads definitions now allow OUTPUT=DUMMY.
When defining IODEV=3 threads, if output is not required, the OUTPUT parameter can be coded as OUTPUT=DUMMY.
For example:

IODEV=3,INPUT=IOD3IN1,OUTPUT=DUMMY


This means that no DD statement is required for the output data set, and in cases where many
IODEV=3 threads are defined to simulate a large number of users, this enhancement will reduce the number of DD statements required by one half.

===RESPAGE parameter (new)===
Activates the APSY Precompiled Procedures in storage feature using above the bar pages by specifying a number of 4K operating system pages.

===RETRVKEY parameter change===
New in this release, if you specify a non-zero setting of <var>[[RETRVKEY parameter|RETRVKEY]]</var>:
<ul>
<li>If you have set the <code>X'01'</code> or <code>X'10'</code> bits of the <var>[[RETRVOPT parameter|RETRVOPT]]</var> parameter, you can use a
forward retrieve PF key, in addition to the backward retrieve PF key specified by <var>RETRVKEY</var>.
'''Note:'''
If either of these bits is set, the <code>X'02'</code> bit is strongly recommended as well.
<li>The size of the allocated storage area, and hence the number and length of input lines available for retrieval, is specified
by the value of the <var>[[RETRVBUF parameter|RETRVBUF]]</var> parameter.
</ul>

===SEQPDL parameter (new)===
The <var>[[Release_notes_for_Model_204_version_7.5_(DRAFT)#SEQPDL_parameter|SEQPDL]]</var> parameter controls the amount of free space that must be present in the user's Push Down List in order for the SOUL sequencer to proceed with the next quad code. SEQPDL allows enough PDL space for the lower level journaling routines to handle error conditions properly without breaking files and causing ERROR 2126 USER'S PUSHDOWN LIST OVERFLOWED.

===SESMAXTO parameter (new)===
The <var>[[SESMAXTO parameter|SESMAXTO]]</var> parameter can be used limit the maximum [[Sessions|session]] timeout value or to cause all current closed sessions to be immediately discarded.

===UPCASMSG parameter (new)===
The <var>[[UPCASMSG parameter|UPCASMSG]]</var> parameter can be used to translate messages issued by <var class="product">Model 204</var> to uppercase; otherwise (depending on the message being issued) they are displayed in mixed (upper and lower) case.





==New and updated messages==
'''M204.0141:
 BUG .. DUPLICATE FILE NAME IN CP RECORD

Explanation: A duplicate file name was encountered while attempting to add a deferred update dataset to the file directory during recovery. This indicates a potential problem in the Model 204 software.

System Manager Response: Contact Customer Support with the following documentation:
<ul>
<li>Audit trail from the previous run</li>
<li>Journal from the previous run</li>
</ul>
Return Codes: E 0 4 AD OPR
----
'''M204.0204:
 
PARAMETER SMFSVC OBSOLETE AND NOT RESET'''
 
'''Explanation:''' Writing records to the SMF data set no longer requires the installation of an SVC. The
SMFSVC parameter is therefore obsolete and cannot be reset.
 '''System Manager Response:''' No response required.
 '''Return Codes:''' I 0 0 AUDITMS

----

Messages M204.0332 and M204.0336 indicate problems with the CRAM interface.
The visibility of these messages has been improved by:
<ul>
<li>writing the message to the operator and the JESLOG
<li>writing the message as an ER line in CCAAUDIT
<li>setting the return code to 80
</ul>

'''M204.0332:
 RC ''nn'' FROM CRFS OPEN'''
 '''Explanation:''' The run has failed to initialize due to problems with the CRAM interface.
The possible formats of this message are:

Format 1: RC nn FROM CRFS OPEN/PUT/GET

Format 2: ECB postcode FROM CRFS PUT/GET
<ul>
<li>
Format 1 indicates that Model 204 module CRFS attempted to open channel, send a message down the channel, or receive a message from a channel. CRAM was unable to satisfy the request. The message states the return code and the
operation attempted.</li>
<li>
Format 2 indicates that Model 204 module CRFS received an unexpected post code from CRAM while attempting an I/O operation on a channel. The message states the post code and the operation attempted.
</li>
</ul>
'''System Manager Response:''' Contact Technical Support and have the audit trail available.
 '''Return Codes:''' C 80 80 AUDITER NOTERM OPR

'''M204.0336:
 RC ''nn'' FROM CRIO OPEN'''
 '''Explanation:''' The run has failed to initialize due to problems with the CRAM interface.
The possible formats of this message are:

Format 1: RC nn FROM CRIO OPEN/PUT/GET

Format 2: ECB postcode FROM CRFS PUT/GET
<ul>
<li>
Format 1 indicates that Model 204 module CRIO attempted to open a channel,
send a message down a channel, or receive a message from a channel. CRAM
was unable to satisfy the request. The message states the return code and the
operation attempted. For example, the return code 16 indicates that the CRAM
channel is already open.</li>
<li>
Format 2 indicates that Model 204 module CRFS received an unexpected post
code from CRAM while attempting an I/O operation on a channel. The message
shows the post code and the operation attempted.</li>
</ul>
'''System Manager Response:''' Contact Technical Support and have the audit trail available.
 
'''Return Codes:''' C 80 80 AUDITER NOTERM OPR

----

'''M204.0434:
 
NJBUFF SET TO %C'''

'''Explanation:''' TBD

----

'''M204.0761:
 ATRPG*ASTRPPG EXCEEDS <var class="term">maxentries</var>

'''Explanation:''' You attempted to initialize a file that was created with invalid parameters. The number of dictionary entries is determined by the product of the parameters ATRPG and ASTRPPG. The maximum allowed product is 4000, or 32000 for a FILEORG=x'100' file. The INITIALIZE command is rejected.

'''Response:''' The file must be recreated. Retry the CREATE command specifying ATRPG and ASTRPPG parameter values such that the product of the two is less than <var class="term">maxentries</var>.

C 0 4 AUDITER
----

'''M204.0790:
 
FILE TOO BIG'''
 
'''Explanation:''' The total number of records possible in Table B exceeds 342 segments for files that do not have the FILEORG X'200' bit set and 1024 segments for files that have the FILEORG X'200' bit set.
The number of potential record numbers per segment is 49,152.
The number of possible segments in Table B is calculated by the following formula:

((BSIZE * BRECPPG) / 49,152)) + (1 if remainder not 0)

If the result exceeds 342 or 1024 respectively too many segments result and MODEL 204 rejects the CREATE command.
 '''File Manager Response:''' Make the file smaller (by specifying a smaller BSIZE or smaller BRECPPG), or divide the file into smaller pieces and use the file group feature to process them as a single logical file.
 '''Return Codes:''' C 0 4 AUDITER
----

'''M204.0797:
 
BSIZE*BRECPPG EXCEEDS MAXIMUM VALUE'''
 
'''Explanation:''' The product of BSIZE and BRECPPG must not exceed 16,777,216 for regular Model 204 files (which do not have the FILEORG X'200' bit set) and 50,331,648 for files that have the FILEORG X'200' bit set. These numbers specify the maximum number of records allowed in a single Model 204 file.

The CREATE or INCREASE command is rejected.
 '''File Manager Response:''' Retry the command, specifying values for BSIZE and BRECPPG so that BSIZE*BRECPPG does not exceed the limit. Refer to the <var class="book"> Rocket Model 204 File Manager's Guide</var> for more information on file sizes.
 '''Return Codes:''' C 0 4 AUDITER

----

'''M204.1052:
 
LOUTPB %C TO %C'''
 
'''Explanation:'''
LOUTPB has been increased or decreased, to the value given in the message.
With a full-screen terminal the value is 1.5 times the minimum for that model number, rounded
up to a multiple of 8.
A model 2 terminal results in a LOUTPB of 3200.
A model 5 terminal results in a LOUTPB of 5664.
If NBKPG is greater than 0, the largest allowable value for LOUTPB is PAGESZ
minus 40, so the value can be decreased for this reason.
'''User Response:''' No response is needed. This message is for information only.
 '''Return Codes:''' I 0 0 AUDITAD
----

'''M204.1060:
 
%C NOT ALLOWED WITH NON SWAPPABLE SERVERS'''
'''Explanation:''' The service requested is not compatible with non-swappable servers.
'''System Manager Response:''' Remove any non-swappable server settings and restart Model 204 to repeat the service.
'''Return Codes:''' E 0 4 AUDITMS
----

'''M204.1131:
 
CAN'T <var class="term">action</var>'''
 
'''Explanation:''' The procedure action cannot be taken for one of the following reasons:
<ul>
<li>The procedure is in use by another user.</li>
<li>The procedure is not in the file.</li>
<li>The user does not have the correct privileges to change the procedure.</li>
<li>If a RENAME or ASSIGN has been attempted, the alias might already exist.</li>
</ul>
'''Response:''' Make sure that the procedure name is spelled correctly.
If the named procedure is in use, retry the command when the procedure is no longer in use. Otherwise, arrange to place the
procedure in the file or to obtain the privileges to change the procedure.
 '''Return Codes:''' C 0 4 SUFFIX AUDITER

----
'''M204.1260:
 
[FIELD | FIELDGROUP] WAS PREVIOUSLY DEFINED WITH DIFFERENT ATTRIBUTES, NEW [FIELD | FIELDGROUP] OPTIONS IGNORED

Explanation: A DEFINE [FIELD | FIELDGROUP] command has attempted to define an existing field with different attributes.
Response: If you wish to redefine the attributes of the field, you must issue the REDEFINE [FIELD | FIELDGROUP] command. Notify your file manager.
Return Codes: C 0 4 AUDITER
----

'''M204.1307:
 
%C LOGON REJECTED - <var class="term">reason text</var> (REASON CODE: %X)

Explanation: The MODEL 204 3270 terminal handler has rejected a logon request from a 3270 terminal for the reason stated. The following reason codes are defined:
<ol>
<li>There are no control blocks available for new logons. Increase the number of IODEV 7 terminal definitions. The reason text is: NOT ENOUGH 3270 TERMINALS.</li>
<li>The terminal has been defined with a non-3270 transmission services profile. The LU type must be 2. The reason text is: LU TYPE NOT = 2.</li>
<li>The terminal has been defined to require definite responses to messages it sends inbound to the host. The transmission services profile must be 3. 
The reason text is: TS PROFILE NOT = 3.</li>
<li>There has been an error on this terminal. This is a retryable error. The reason text is: LOSTERM SET FOR THIS TERMINAL.</li>
<li>The terminal definition is in use. This error should not occur. The reason text is: TERMINAL ALREADY IN USE.</li>
</ol>
System Manager Response: Contact your VTAM systems programmer to correct the VTAM definition.
Return Codes: E 0 4 AD SAVE NOTERM OPR
----
'''M204.1346:
 
SERVER AREA GREATER THAN CYLINDER CAPACITY FOR THIS DEVICE. CYLINDER SIZE = <var class="term">nnn</var> BYTES.
Explanation:
The number of bytes specified for the largest server area (SERVSIZE)
is greater than <var class="term">nnn</var>, the number of bytes contained in a cylinder for
the type of disk device on which your CCASERVR (CCASRVR for DOS) data set resides.
System Manager Response: Do one of the following:
<ul>
<li>ensure that the largest SERVSIZE value does not exceed <var class="term">nnn</var></li>
<li>place your server data sets on a type of disk device that has a
larger cylinder capacity</li>
<li>place CCASERVR in storage. (See the "CCASERVR in Storage feature" section in the <var class="book">Rocket Model 204 System Manager's Guide</var>.)</li>
</ul>
'''Return Codes:''' C 96 96 AUDITER
----

M204.1381 is a new informational message issued during REGENERATE to help verify that the journal data provided in CCAGEN is from the correct CCAJRNL. The 58 bytes printed are the journal header of each journal block as described in the <var class="book">Rocket System Manager’s Guide</var>, Using System Statistics chapter, Table A-2. The message has three variations:
<ul>
<li>
'''M204.1381:
 
CCAGEN: FIRST 5 CCAJRNL BLOCKS + LAST BLOCK IN HEX
'''Explanation:''' The first 58 bytes, in hex, of the first five CCAJRNL blocks and the last CCAJRNL block read from CCAGEN follow in CCAAUDIT.
</li>
<li>

M204.1381: PASS1: 006000020113214F155421910000000000CB...
M204.1381: PASS1: 0AD000020113214F155421910000000100CB...
M204.1381: PASS1: 07BF008A0113214F155421920000000200CB...
M204.1381: PASS1: 0B5E00020113214F155422000000000300CB...
M204.1381: PASS1: 0AAF00120113214F155422030000000400CB...
M204.1381: LASTB: 00C900020113214F155930280000337100CB...

'''Explanation:''' This is an example of the first 5 CCAJRNL blocks and the last block read from CCAGEN during pass 1 of REGENERATE.
</li>
<li>
'''M204.1381:
 
CCAGEN BLOCK COUNT: <var class="term">nnnn</var>
'''Explanation:''' This message provides the count of CCAJRNL blocks read from CCAGEN.
</li>
'''Response:''' This message is informational only; no response is required.
'''Return Codes:''' 1 0 0
----
The following new message replaces M204.1070: ALLOCATE FAILED - <var class="term">reason</var> with additional information regarding the failure of the ALLOCATE command. However, M204.1070 remains in use by Janus/TCPIP for a different purpose.

'''M204.1387:
 
ALLOCATE failed; DDNAME=<var class="term">ddname</var>,DSNAME=<var class="term">dsname</var> could not be located
'''Explanation:''' An attempt to allocate an existing data set, data set name=<var class="term">dsname</var>, failed because the specified dsname was not found in the catalog or the catalog could not be accessed.
'''Response:''' Correct the data set name or ensure that the data set exists and is cataloged.
'''Return Codes:''' C 0 4 AUDITER
----
'''M204.1393:
 
CHUNK clause not of format "CHUNK <var class="term">chunkSize</var> FOR <var class="term">chunkTarget</var>"'''
 
'''Explanation:''' On a DEFINE FIELD, the syntax of the CHUNK clause was not in the format shown in this message.
 '''File Manager Response:''' Correct the DEFINE FIELD command that has the incorrect CHUNK clause syntax.
 '''Return Codes:''' C 0 4 AUDITER
----
'''M204.1394:
 
CHUNK <var class="term">chunkSize</var> VALUE INVALID: <var class="term">reason</var>'''
 
'''Explanation:''' On a DEFINE FIELD, the value specified for the size of a CHUNK is invalid;
"reason" indicates why.
 '''File Manager Response:''' Correct the DEFINE FIELD command that has the invalid CHUNK size.
 '''Return Codes:''' C 0 4 AUDITER
----
'''M204.1395:
 
CHUNK target field invalid type: <var class="term">reason</var>'''
 
'''Explanation:''' On a DEFINE FIELD, the field specified as a CHUNK target is not a field type that can be used as a chunk target, for the reason specified.
 '''File Manager Response:''' Correct the DEFINE FIELD command containing the invalid CHUNK target type.
 '''Return Codes:''' C 0 4 AUDITER
----
'''M204.1396:
 
CHUNK fields must be INVISIBLE ORDERED NUMERIC'''
 
'''Explanation:''' On a DEFINE FIELD, an attempt was made to create a CHUNK field that was not INVISIBLE ORDERED NUMERIC, which is a requirement of chunk fields.
 '''File Manager Response:''' Correct the DEFINE FIELD command that has the invalid CHUNK target type.
 '''Return Codes:''' C 0 4 AUDITER
----
'''M204.1397:
 
A CHUNK field was defined, %F may no longer be opened with M204 releases prior to V7R5'''
 '''Response:''' This is an informational message. No action is required.
 '''Return Codes:''' I 0 0 AUDITMS

----
'''M204.1489:
 
NOT ENOUGH FILE SPACE TO CONTINUE PROCEDURE DEFINITION - %F
Explanation: There is no room in the file to store the procedure being entered with the PROCEDURE command.

<table>
<tr><td>If…</td><td>Then Model 204…</td></tr>
<tr><td>Error occurs after the first line of procedure text has been stored</td><td>Keeps the partial procedure</td></tr>
<tr><td>You are entering the text at your terminal</td><td>Ends procedure definition immediately</td></tr>
<tr><td>Procedure text is supplied by another procedure</td><td>Flushes the remainder of the input</td></tr>
<tr><td>Procedure text is supplied in a batch input stream (CCAIN)</td><td>Flushes the remainder of the procedure text and resumes processing after the END PROCEDURE command</td></tr>
</table>

Response: Create space in the file by deleting unwanted procedures or increasing Table D with the INCREASE command. Replace the partial procedure using the PROCEDURE command, or use the EDIT command to supply the missing text.

Return Codes: C 0 4 CANCEL AUDITER

----
'''M204.1587:
 
FSCB full, IMAGE too large: LFSCB required = <var class="term">num</var>, bytes available in FSCB = <var class="term">num</var>'''
Explanation: The value specified in an IDENTIFY statement with the LEN or OCCURS option causes the size of the data block described by the current image to overflow the FSCB. The FSCB is a User Language work area that is used to hold a data block and its related image definitions.
'''Response:''' Use the VIEW LFSCB command to determine the current size of the FSCB. Use the UTABLE command to increase the value of the LFSCB parameter. Check the User Language request for programming errors that might cause the value specified in the IDENTIFY statement to be too large. Retry the request.
'''Return Codes: '''C 0 4 CANCEL AUDITER 

----
'''M204.1589:
 
Maximum IMAGE length is 32767: LFSCB required = <var class="term">num</var>'''
Explanation: An attempt has been made to define an image greater than 32K.
'''Response:''' Redefine the image so that it is not greater than the maximum length of 32767.
'''Return Codes:''' C 0 4 CANCEL AUDITER

----
'''M204.1938:
 
REQUEST FOR SPACE IN TABLE E EXTENDS BEYOND EHIGHPG, BIT MAP PAGES ARE SCANNED FOR FREESPACE
Explanation: A User Language request attempted to store a large object and all of the append pages in Table E have been allocated. Model 204 must scan the bit map pages for previously allocated Table E pages to look for free space to store the large object.
File manager response: The file should be reorganized to compact fragmented Table E space.
Return Codes: I 0 0
----
'''M204.2126:'''
 
'''USER'S PUSHDOWN LIST OVERFLOWED'''
 
'''Explanation:''' The user's pushdown list is an internal stack for maintaining state information for user threads across internal Model 204 subroutines. The user pushdown list lives in each user's server. Its size requirement depends on the complexity of the command or User Language request.

This message is issued whenever Model 204 detects that pushdown list data has spilled into adjacent control structures. Because of potential corruption the user is restarted.
 '''Response:''' Increase the size of the user pushdown list by using the LPDLST parameter of the UTABLE command. Notify your system manager.
 '''System Manager Response:''' If this becomes a frequent occurrence, consider more permanent changes to LPDLST and SERVSIZE, since the pushdown list is a server component.
 '''Return Codes:''' C 0 4 CANCEL
----
'''M204.2329:
 
subsystem <var class="term">name</var> AT <var class="term">location name</var> UNAVAILABLE
Explanation: The indicated subsystem at the specified node is not available for use due to one or more errors occurring at the specified node during start or login processing.
Response: Notify the system manager or try again later.
System manager response: If the subsystem is started, stop the subsystem and resolve communications errors or other errors which occurred at the specified node. After resolving error, use the START SUBSYSTEM command to make the subsystem available for general use. Check to make sure that the LOCATION parameter was set properly in the CCAIN input stream for the Online.
Return Codes: C 0 4
----
'''M204.2551:'''
 
''' {FPL|FCT PG1} IS INVALID FOR FILE: <var class="term">filename</var>'''
 
'''Explanation:''' If the message says FPL, then the FPL (file parameter list) for the associated file is invalid. This could be the result of an incorrect DD, FILEDEF or DLBL statement.

If the message says FCT PG1, then the existence page array page is invalid.

'''File Manager Response:''' If the DD, FILEDEF or DLBL statement is correct and points to the correct data set, then the file must be restored from a backup.
 '''Return Codes:''' C 0 4 AUDITER
----
'''M204.2651:
 NOT ALL THREADS PROCESSED FOR IODEV %C
Explanation: The run is terminated because either:
<ul>
<li>The number of threads specified by NUSERS has been initialized, but there are fewer users of the specified IODEV type than expected.</li>
<li>The DUPTERM number specified by the IODEV card could not be initialized because it exceeded the number of NUSERS.</li>
</ul>
Response: Check that NUSERS matches the total of the listed IODEVs, plus one extra for USER 0. Check also the NOTERM/DUPTERM parameter for the specified IODEV card.
Return Codes: E 80 80 ER
----
'''M204.2719:
 OPEN %C FAILED. UPDATE STATEMENTS ALREADY COMPILED, READ ONLY PRIVILEGES INSUFFICIENT
Explanation: The OPEN or OPENC User Language statement was issued from a request to reopen a file with read-only privileges. However, that request had already been compiled with update statements against the file.
Response: In a User Language request, you cannot use the User Language OPEN or OPENC statement to reopen a file with read-only privileges, if that request contains updates statements against the same file.
Descriptor code: C 0 4 CANCEL
----
'''M204.2739:
 
PARAMETER <var class="term">parm</var> CANNOT BE RESET ON USER 0’S PARAMETER LINE: VALUE IGNORED
Explanation: You reset parameter <var class="term">parm</var> on the User 0 parameter line, but the parameter cannot be set there. The value is ignored, the default value for this parameter remains in effect.
Response: Remove <var class="term">parm</var> from the User 0 parameters, since it will not change the value of the parameter.
Descriptor code: E 0 4 AD
----
'''M204.2746:
 
XSIZE*XRECPPG MAY NOT BE 1 NOR EXCEED 536870911
Explanation: The product of XSIZE and XRECPPG must not exceed 16777216 times 32 minus one, or 536870911. This specifies the maximum number of extension records allowed in a single Model 204 file when using Table X. Also, setting both XRECPPG and XSIZE to 1 is invalid.
The CREATE command is rejected.
Response: Retry the command specifying values for XSIZE and XRECPPG whose product does not exceed the 526870911 limit. Refer to the <var class="book">Rocket Model 204 File Manager’s Guide </var>for more information on file sizes.
Descriptor code: C 0 4
----
'''M204.2826:'''
 
'''%F VERSION IS PRE 6.3. COMPACTION NOT ALLOWED'''
 
'''Explanation:''' An attempt was made to compact a file created prior to Model 204 version 6.3.
 '''File Manager Response:''' Reorganize the file using Model 204 version 6.3.
 '''Return Codes:''' C 0 4 AUDITER

----
'''M204.2831:
 
UPDATES TO DTS FILES NOT SUPPORTED IN THIS ENVIRONMENT
Explanation: DTS files cannot be updated in IFAM, SQL, or PQO environments.
Response: Do not attempt to update DTS file.
Return Codes: C 0 4
----
'''M204.2833:
 
FIELDS CANNOT BE DEFINED IN A FILE WITH ATRPG*ASTRPPG>4000
Return Codes: C 0 4
----
'''M204.2836:'''
 
'''VALUE OF PARAMETER %C INVALID—RESET TO %C'''
 
'''Explanation:''' This is an informational message only.

A parameter was specified with an incorrect value. It has been reset to an internally calculated value that will accommodate other parameter settings. See the description of the parameter named to see what that calculation involves.
 '''System Manager Response:''' The parameter has been reset. No response required.
 '''Return Codes:''' I 0 0 AUDITMS
----
'''M204.2838:
 
%C ONLY VALID IN FILEORG X’100’ FILES
Return Codes: C 0 4
----
'''M204.2839:
 
%C IS A %C, NOT A %C
Return Codes: C 0 4 ECHO
----
'''M204.2841:
 
REMOTE FIELDGROUPS NOT SUPPORTED
Return Codes: C 0 4 ECHO
----
'''M204.2842:
 
INVALID CONTEXT FOR FIELDGROUP
Return Codes: C 0 4 ECHO
----
'''M204.2843:
 
MAXIMUM FIELDGROUP ID EXCEEDED IN RECORD %R IN %F
Return Codes: C 0 4 CANCEL
----
'''M204.2844:
 
MIX OF FIELDS AND FIELDGROUPS, NAME =
Return Codes: C 0 4 SUFFIX ECHO
----
'''M204.2845:
 
INVALID FIELDGROUP CONTEXT FOR %C
Explanation: The $function was used outside of field group context.
Descriptor code:C 0 4 SUFFIX ECHO
----
'''M204.2846:
 
INVALID FIELDGROUP CONTEXT FOR %C
Return Codes: C 0 4 CANCEL
----
'''M204.2847:
 
FIELDGROUP CONTEXT LOST IN RECORD %R IN %F
Return Codes: C 0 4 CANCEL
----
'''M204.2848: INVALID FIELDGROUP ID: %C
 
Return Codes: C 0 4 CANCEL
----
'''M204.2849: REQUIRED KEYWORD %C MISSING
 
Return Codes: X 0 4 ECHO
----
'''M204.2850:
 
%C VALUE MISSING
Return Codes: C 0 4
----
'''M204.2851:
 
%C VALUE "%C" TOO BIG, MUST BE <%C BYTES
Return Codes: C 0 4
----

2852: UPDATE TO MISSING FIELDGROUP OCCURRENCE IN RECORD %R IN %F
Return Codes: C 0 4 CANCEL
----

2853: %C NOT ALLOWED FOR EXACTLY-ONE FIELD
Return Codes: C 0 4
----

2854: ATTEMPT TO DO %C FOR EXACTLY-ONE FIELD: %C
Return Codes: C 0 4 CANCEL
----

2855: FIELD DEPTH+LENGTH UNREPRESENTABLE IN RECORD %R IN %F
Return Codes: C 0 4 CANCEL
----

2856: FIELDNAME VARIABLE %C: EXPECTED %C, GOT %C
Return Codes: C 0 4 CANCEL
----

2857: %C FIELD NOT ALLOWED FOR %C FIELD
Return Codes: C 0 4
----

2858: FIELDGROUP CONTEXT MISMATCH BETWEEN COUNTOCCURRENCES- OF FIELD AND COUNTED FIELD
Return Codes: C 0 4
----

2859: NEW AUTOMATIC FIELD NOT ALLOWED FOR NON-EMPTY FILE
Return Codes: C 0 4
----

2860: FIELD %C ALREADY HAS A COUNT-OCCURRENCES-OF FIELD
Return Codes: C 0 4
----

2861: OCCURRENCE COUNTER %C OVERFLOWED
Return Codes: C 0 4 CANCEL
----

2862: ATTEMPT TO UPDATE AUTOMATIC FIELD %C
Return Codes: C 0 4 SUFFIX ECHO
----

2863: ATTEMPT TO DO %C FOR AUTOMATIC FIELD: %C
Return Codes: C 0 4 CANCEL
----

2865:CANCELATTEMPT TO %C INVALID DATETIME VALUE: %C = %C' 
Return Codes: C 0 4 CANCEL
----

2866: FILE ALREADY HAS %C FIELD
Return Codes: C 0 4
----

2867: FIELDGROUP %C ALREADY HAS %C FIELD
Explanation: If you try to define a second update tracker field of the same type for the same field group, you will invoke message 2867, where %C represents:
<ul>
<li>A CREATE-TIME</li>
<li>A CREATE-TIMEUTC</li>
<li>A CREATE-USER</li>
<li>AN UPDATE-TIME</li>
<li>AN UPDATE-TIMEUTC</li>
<li>AN UPDATE-USER</li>
</ul>

Return Codes: C O 4
----

2868: MINLOBE MUST BE BETWEEN 0 AND %C'
Return Codes: C 0 4
----
'''M204.2869:'''
 
'''CHANGE REFUSED: MINLOBE > 0 FOR %F FIELD %C'''
 '''Return Codes:''' C 0 4 AUDITER
----
'''M204.2870:'''
 
'''CHANGE REFUSED: MINLOBE > 0 FOR %F FIELD %C'''
 '''Return Codes:''' C 0 4 CANCEL AUDITER
----
2871: FIELDGROUP CONTEXT MISMATCH BETWEEN CONCATENATION-OF FIELD AND COMPONENT FIELD'
Return Codes: C 0 4
----

2872: CONCATENATION VALUE TOO LONG FOR FIELD %C'
Return Codes: C 0 4 CANCEL
----

2873: CONCATENATION FIELD %C COMPONENT FIELD %C CONTAINS SEPARATOR CHARACTER'
Return Codes: C 0 4 CANCEL
----

2874: ATTEMPT TO %C A VALUE THAT'S %C: %C
Return Codes: C 0 4 CANCEL
----

2875: CONCATENATION LIST INVALID: %C'
Return Codes: C 0 4
----

2876: INVALID %C VALUE: %C'
Return Codes: C 0 4
----

2877: WITH CLAUSE INVALID: %C'
Return Codes: C 0 4 ECHO

----

 2878: WITH CLAUSE INVALID: FIELD %C IN %F %C
Return Codes: C 0 4 CANCEL
----

2879: REMOTE ID %C MODE %C'
Return Codes: I 0 0 SAVE NOTERM OPR

----

2880: MEMORY DATASETS CANNOT BE PART OF MULTI-DATASET FILE
Return Codes: C 0 4

----

2881: DATA CONVERSION ERROR
Return Codes: C 0 4 CANCEL

----

2882: RECOVERY JOURNAL VERSION %X IS NOT SUPPORTED

Return Codes:E 0 4 OPR

----

2884: [FIELD | FIELDGROUP] WAS PREVIOUSLY DEFINED AS A [FIELDGROUP | FIELD], NEW DEFINITION IGNORED

Return Codes: C 0 4

----

2885: INVALID FIELDGROUP ID: <var class="term">fieldgroup</var>

Return Codes: C 0 4 CANCEL

----

2886: FIELDGROUP ID %C ALREADY EXISTS IN RECORD %R IN %F'

Return Codes: C 0 4

----

2903: FILEORG=X'100' IS NOT SUPPORTED DURING FLOD/FILELOAD

Return Codes: E 0 8
----
'''M204.2933:'''
 
''''Module version mismatch, KOMM=%C, %C=% C''''
 '''Return Codes:''' E 0 4 SNAP

----
'''M204.2934:'''
 
'''FILEORG X<nowiki>''200''</nowiki> not supported for hashed or sorted file organizations'''
 
'''Explanation:''' Hashed or sorted files must be 16M files. The CREATE FILE command
is rejected.
 '''File Manager Response:''' Remove the conflicting FILEORG parameter and reissue CREATE FILE.
 '''Return Codes:''' E 0 4 AUDITMS

----

'''M204.2935:'''
 
'''{CHUNK|CHUNK target} FIELDS MAY NOT BE RENAMED OR DELETED'''
 
 '''File Manager Response:''' Do not attempt to RENAME or DELETE chunks or chunk targets.
 '''Return Codes:''' C 0 4 AUDITER

----

'''M204.2936:'''
 
'''A CHUNK FIELD OF SIZE <var class="term">nnn</var> ALREADY EXISTS FOR THIS FIELD'''
 
'''Explanation:''' For a given CHUNK target field, duplicate chunk sizes are not permitted.
 '''File Manager Response:''' Correct the DEFINE FIELD that caused the message.
 '''Return Codes:''' C 0 4 AUDITER

----

'''M204.2937:'''
 
'''CHUNK SIZE: <var class="term">nnn</var> IS NOT AN INTEGRAL MULTIPLE/DIVISOR OF THE EXISTING CHUNK SIZE: <var class="term">nnn</var>'''
 
'''Explanation:''' A CHUNK field's chunk size must be an integral multiple/divisor of all other chunk's sizes for a given chunk target.
 This message identifies the existing chunk size that conflicts with the new one.
 '''File Manager Response:''' Correct the DEFINE FIELD that caused the message.
 '''Return Codes:''' C 0 4 AUDITER

----

'''M204.2938:'''
 
'''YOU MAY NOT DEFINE MORE THAN 20 CHUNKS FOR A FIELD '''
 
'''Explanation:''' A given chunk target can have at most 20 chunks defined.
 '''File Manager Response:''' Do not try to define more than 20 CHUNK fields for any given CHUNK target field.
 '''Return Codes:''' C 0 4 AUDITER
----

[[Category:Model 204 release notes|Model 204 7.5]]
[[Category:Release notes|Model 204 7.5 ]]

RESPAGE parameter

2013-09-06T15:29:25Z

DVRICKP:

{{Template:RESPAGE parameter subtitle}}
==Summary==
<dl>
<dt>Default value
<dd>0
<dt>Parameter type
<dd>System
<dt>Where set
<dd>User 0 parameter line
<dt>Related products
<dd>All
<dt>Introduced
<dd><var class="product">Model 204</var> version 7.5
</dl>
==Description==
Activates the APSY Precompiled Procedures in storage feature using above the bar pages by specifying a number of 4K operating system pages.
If specified, the value will be rounded to the next 1 megabyte page boundary (256 4K pages).
If specified, RESSIZE, RESLTHR and RESTHRSH are ignored; RESSIZE is reset to -1; RESLTHR and RESTHRSH are reset to zero.
For IBM z/OS systems only.
[[Category:Parameters]]
[[Category:System parameters]]