VTAM Printer Support messages

From m204wiki
Revision as of 21:31, 9 December 2016 by ELowell (talk | contribs) (Created page with "This topic provides a listing of messages for the VTAM Printer Support (VPS) feature. ==Overview of message return codes== In the VTAM Printer Support messages, message retur...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

This topic provides a listing of messages for the VTAM Printer Support (VPS) feature.

Overview of message return codes

In the VTAM Printer Support messages, message return code information includes the message class, Online and Batch return codes, and system action.

Message classes

A single letter indicates the class of the message.

Message class types

Class Message type Behavior
I Non critical Both the Batch and Online return code equals zero (0). A response is not required.
P Prompting Both the Batch and Online return code equals zero (0). You must respond to the prompt.
E Non counted error Batch return code does not equal zero (0)--usually four (4). Audit type default is MS, but may be overridden.
C Counting error Has a Batch Return code not equal 0 (usually 4) Audit type defaults to ER, but may be overridden.

E (non counted) error messages and C (counted) error messages indicate either that an error has occurred or that the message provides debugging information.

Online and Batch return codes

The Online and Batch return codes are also provided. Each Model 204 message has an Online and a Batch return code associated with it. Each code is a number from 0 to 255. Higher return codes generally indicate more severe errors. The lowest batch return code for an error class message is 4. The job return code at the end of a run is the highest of the individual message return codes received during the run.

System responses

The automatic responses of Model 204 to the condition that generated the message are described in the following table.

Model 204 responses to error conditions

Action Meaning
AUDITAD Writes the message to the audit trail as an AD line. An AD line contains information about the run, the status of the Model 204 file, the user password table, or messages sent from a host language program with the IFERR call.
AUDITER Writes the message to the audit trail as an ER line and treats this as a counting error: that is, after a specified number of these errors, the user’s session is terminated. The number of allowable errors can be reset with the ERMX parameter. The ERMAX default is 30.
AUDITMS Writes the message to the audit trail as an MS line. An MS line includes information related to user logins, logouts, file and group opens and closes, and procedure includes.
AUDITRK Writes the message to the audit trail as an RK line. An RK line includes information on system initialization and the record of a call to a Host Language Interface function.
CANCEL Cancels the user’s request.
DUMP Generates a dump of the Model 204 region, partition, or virtual machine.
ECHO Displays the line that caused the error.
NOPREFIX Suppresses the M204.nnnn message prefix.
NOTERM Writes the message to the audit trail, but does not display the message on the user’s terminal.
OPR Displays the message on the operator’s console.
LAST Saves message in user’s last error buffer.
SNAP Generates a snapshot (or dump) of a part of memory for a Model 204 run. It contains information about the user server area, Model 204 system control, and the data and I/O buffers.
SAVE Stores the message in the error message table. These messages are serious errors and include those messages that accompany snaps. The number of messages saved in the error message table is determined by the value of the ERRSAVE parameter. The system manager or system administrator can display the error message table by issuing the VIEW ERRORS command.

Messages

2169 PRINT QUEUE NAME EXPECTED, BUT ABSENT

Return codes: E 0 4 AUDITER

2170 %C IS A RESERVED PRINT QUEUE NAME

Return codes: E 0 4 AUDITER

2171 %C IS AN INVALID PRINT QUEUE NAME

Return codes: E 0 4 AUDITER

2172 PRINT QUEUE FACILITY ALREADY ACTIVE

Return codes: E 0 4 AUDITER

2173 INCORRECT DISPLAY PRINT QUEUE SYNTAX, COMMAND REJECTED

Return codes: E 0 4 AUDITER

2174 EXTRANEOUS COMMAND OPTION: %C

Return codes: I 0 0

2175 INVALID PRINT REQUEST TYPE: %C

Return codes: I 0 0

2176 PRINT QUEUE %C NOT FOUND

Return codes: E 0 4 AUDITER

2177 NO PRINT QUEUE DEFINITIONS EXIST

Return codes: I 0 0

2178 NO REQUESTS FOUND FOR PRINT QUEUE quname

You have just issued the D PRINT QUEUE command. There are no requests in the qname specified. This is an information message; no response is required.

Return codes: I 0 0

2179 UNABLE TO LOCATE PRINT REQUEST %C %C

You have specified SPOOLOPT=X'08'. If there is a DDNAME CCAPRQ, Model 204 attempts to create the CCAPRQ file automatically, without the user doing the CREATE. This is an information message; no response is required.

Return codes: I 0 0

2180 CREATE OF CCAPRQ FORCED BY SPOOLOPT

Return codes: I 0 0

2181 RECOVERY OF CCAPRQ SUPPRESSED BY SPOOLOPT

Return codes: I 0 0 VIEWERR AUDITAD OPR

2182 INCORRECT DELETE PRINT QUEUE SYNTAX, COMMAND REJECTED

Return codes: E 0 4 AUDITER

2183 DELETE REJECTED FOR PRINT QUEUE %C, USE REQUEST ACTIVE

Return codes: E 0 4

2184 DELETE REJECTED FOR PRINT QUEUE %C, PRINTER DEFINED

Return codes: E 0 4

2185 DELETE REJECTED FOR PRINT QUEUE %C, REQUESTS ARE QUEUED

Return codes: E 0 4

2186 INCORRECT SUSPEND OR RESUME SYNTAX, COMMAND REJECTED

Return codes: E 0 4 AUDITER

2187 PRINT QUEUE %C %C SUSPENDED

Return codes: I 0 0

2188 PRINT QUEUE DAEMON INITIALIZED

You have entered the PRTQDAEMON command, which begins the print queue DAEMON initialization. This is an information message; no response is required.

Return codes: I 0 0

2189 PRINT QUEUE %C IS SUSPENDED

Return codes: I 0 0

2190 INCORRECT USE PRINT QUEUE SYNTAX

Return codes: E 0 4 AUDITER

2191 CCAPRQ FULL, DEFINITION REJECTED

Return codes: E 0 4 AUDITER

2192 CCAPRQ FULL, REQUEST CANCELLED

Return codes: E 0 4 AUDITER

2193 PRINT QUEUE OUTPUT DISCARDED FOR CANCELLED

Return codes: I 0 0

2194 MAXIMUM REQUEST SIZE FOR PRINT QUEUE EXCEEDED, REQUEST CANCELED

Return codes: E 0 4 AUDITER

2195 INCORRECT PURGE SYNTAX, COMMAND REJECTED

Return codes: E 0 4 AUDITER

2196 INDIVIDUAL REQUEST FORM NOT IMPLEMENTED

Return codes: I 0 0

2197 QUEUEING REQUESTS NOT YET IMPLEMENTED

Return codes: I 0 0

2198 INSUFFICIENT STORAGE, UNABLE TO INITIALI ZE VTAM PRINTER SUPPORT

Return codes: E 0 4 AUDITER

2199 UNABLE TO OPEN VTAM APPLID %C, REASON CODE: X'%X'

Return codes: E 0 4 AUDITER

2200 SETLOGON FAILED FOR %C, X0 = X'%X', RPLFDB2 = X'%X'

Return codes: E 0 4 AUDITER

2201 IDENTIFY OF VTAM 328X SUBTASK FAILED, RC = %C

Return codes: E 0 4

2202 UNRECOGNIZED VTAM PRINTER OPTION: "%C"

Return codes: I 0 0

2203 INCORRECT DEFINE OR REDEFINE VTAM PRINTER SYNTAX, COMMAND REJECTED

Return codes: E 0 4 AUDITER

2204 %C AND %C ARE CONFLICTION OPTIONS

Return codes: I 0 0

2205 VTAM PRINTER NAME EXPECTED, BUT ABSENT

Return codes: E 0 4 AUDITER

2206 %C IS A RESERVED VTAM PRINTER NAME

Return codes: E 0 4 AUDITER

2207 %C IS AN INVALID VTAM PRINTER NAME

Return codes: E 0 4 AUDITER

2208 NO VTAM PRINTERS DEFINED

Return codes: E 0 4 AUDITER

2209 INCORRECT %C VTAM PRINTER SYNTAX, COMMAND REJECTED

Return codes: E 0 4 AUDITER

2210 VTAM PRINTER %C NOT FOUND

Return codes: E 0 4 AUDITER

2211 PRINT QUEUE %C HAS NO VTAM PRINTER

Return codes: E 0 4 AUDITER

2212 VTAM PRINTER %C %C SUSPENDED

Return codes: E 0 4 AUDITER

2213 VTAM PRINTER %C IS ACTIVE, FORCE REQUIRED

Return codes: E 0 4 AUDITER

2214 VTAM PRINTER %C NOT IN SUSPENDED OR IDLE STATE

Return codes: E 0 4 AUDITER

2215 VTAM PRINTER %C ALREADY DEFINED

Return codes: E 0 4 AUDITER

2216 %C OPTION REQUIRED, BUT NOT SPECIFIED

Return codes: E 0 4 AUDITER

2217 PRINT QUEUE %C ALREADY HAS A PRINTER

Return codes: E 0 4 AUDITER

2218 INSUFFICIENT STORAGE, UNABLE TO DEFINE PRINTER

Return codes: E 0 4 AUDITER

2219 ATTACH OF VTAM PRINTER SUBTASK FAILED, RC = %C

Return codes: E 0 4 AUDITER

2220 %C IS AN %C LU FOR A VTAM PRINTER, COMMAND REJECTED

The luname in the DEFINE VTAM PRINTER luname command is invalid.

Response: Contact your system manager.

System Manager response: The luname must be defined to a valid VTAM LUNAME.

Return codes: E 0 4 AUDITER

2221 INQUIRE FAILED FOR %C, RETURN CODE = X'%X'

Return codes: E 0 4

2222 DEVCHAR FOR %C: X"%X"

Return codes: E 0 4

2223 INQUIRE RC FOR %C X"%X", RTNCD = X"%X

Return codes: E 0 4

2224 PRINTER MUST BE SUSPENDED TO PROCESS

Return codes: E 0 4

2225 PRTQDMN: LU %C COMMAND %X BUF2 %X

Return codes: E 0 4

2226 PRTQDMN: LU %C RESPONSE %X

Return codes: E 0 4

2227 PRINT QUEUE DAEMON ALREADY ACTIVE AS USE

Return codes: E 0 4

2228 READ NEXT FROM %C WITH NO CURRENT REQUEST

Return codes: I 0 0 VIEWER AUDITAD

2229 SESSION LOST FOR VTAM PRINTER %C, LOSTERM

Return codes: I 0 0 VIEWER AUDITAD OPR

2230 INTERVENTION REQUIRED FOR VTAM PRINTER %C

Intervention was required for the VTAM printer. Model 204 waits and retries printing.

Response: Check that the printer has enough paper, or ink, or is otherwise ready for printing.

Return codes: I 0 0 VIEWER AUDITAD OPR

2231 INTERVENTION TIMEOUT FOR VTAM PRINTER %C

Intervention was required for the VTAM printer. Model 204 waited and retried printing, until it timed out. This message is preceded by message M204.2230.

Response: Check that the printer has enough paper, or ink, or is otherwise ready for printing.

Return codes: I 0 0 VIEWER AUDITAD OPR

2232 WARNING - ASSUMING %C FORMS LOADED IN %C

Return codes: I 0 0

2233 WARNING - CHANGING FROM %C TO %C FORMS, READY COMMAND REQUIRED

Return codes: I 0 0

2234 VTAM PRINTER %C HAS BEEN %C' DELETED/SUSPENDED

Return codes: I 0 0 AUDITAD

2235 READY VTAM PRINTER %C WITH FORMS %C

Return codes: I 0 0 VIEWER AUDITAD OPR

2236 VTAM PRINTER %C SUSPENDED, RPLREQ: X"%X'

Return codes: I 0 0 VIEWER AUDITAD OPR

2237 VTAM PRINTER ACB CLOSED BY VTAM FAILURE

Return codes: E 0 4 AUDITER

2238 VTAM PRINTER APPLID: %C %C

Return codes: E 0 4 VIEWER AUDITAD OPR

2239 VTAM PRINTER APPLID: %C NEEDS ACQ ABILITY

Return codes: E 0 4 VIEWER AUDITAD OPR

2240 VTAM PRINTER APPLID %C DOES NOT HAVE ACQ AUTHORITY

Return codes: E 0 4 AUDITER

2241 TPEND EXIT ENTERED FOR %C, REASON CODE X'%X'

Return codes: E 0 4 VIEWER AUDITAD OPR

2245 INCORRECT REPRINT SYNTAX, COMMAND REJECTED

Return codes: E 0 4 AUDITER

2246 CCAPRQ REQUIRES RECOVERY, FISTAT = %X

Return codes: I 0 0 VIEWER AUDITAD OPR

2247 RECOVERING CCAPRQ...

Return codes: I 0 0 VIEWER AUDITAD OPR

2248 CCAPRQ RECOVERY COMPLETE

Return codes: I 0 0 VIEWER AUDITAD OPR

2249 CCAPRQ RECOVERY FAILED

Return codes: I 0 0 VIEWER SNAP AUDITAD OPR

2428 CCAPRQ DATASET TOO SMALL

Return codes: I 0 0 AUDITAD

2429 COMMAND REQUIRES ADMINISTRATOR PRIVILEGE

Return codes: E 0 4 AUDITER

2430 CREATEPQ COMMAND REJECTED

Return codes: E 0 4 AUDITER

2431 CCAPRQ OPEN FAILED

Return codes: I 0 0

2432 PRINT REQUEST %C %C QUEUED FOR %C, %C

Return codes: I 0 0 NOTERM

2433 CCAPRQ REQUIRED, BUT NOT PRESENT

Return codes: E 0 4 AUDITER

2434 INCORRECT DEFINE PRINT QUEUE SYNTAX, COMMAND REJECTED

Return codes: E 0 4 AUDITER

2435 PRINT QUEUE FACILITY NOT ACTIVE

Return codes: E 0 4 AUDITER

2436 PRINT QUEUE %C ALREADY EXISTS

Return codes: E 0 4 AUDITER

2437 PRINT QUEUE DEFINITIONS BUSY, TRY LATER

Return codes: I 0 0

2438 OPTION "%C" ALREADY SPECIFIED, COMMAND REJECTED

Return codes: E 0 4 AUDITER

2439 PREVIOUS OPTIONS RESET BY "LIKE" CLAUSE

Return codes: I 0 0

2440 UNRECOGNIZED DEFINE PRINT QUEUE OPTION: "%C"

Return codes: I 0 0

2441 MAXIMUM FORMS NAME LENGTH IS FOUR

Return codes: I 0 0

2442 INVALID %C SPECIFICATION, COMMAND REJECTED

Return codes: E 0 4 AUDITER

2443 TARGET OF LIKE CLAUSE, "%C", NOT FOUND

Return codes: I 0 0