File statistics and tuning

Overview

Model 204 maintains a variety of utilization statistics for each user and file active during a particular run. These statistics are written to the journal, as explained in the Rocket Model 204 System Manager's Guide, which also provides a complete description of all Model 204 statistics.

But the journal is not the only source of statistics. You can run VIEW commands against your files to get statistics on the current file parameters and usage.

Even if not users of the products, the manuals for the real time monitor SIRMON and SIRTUNE provide useful advice on monitoring and tuning Model 204 files (as well as program and system performance as a whole).

Journal statistics

For more information on using journals in system and media recovery, see Producing and archiving journals.

When journal statistics are printed

File statistics are kept for every file opened during the run. These statistics summarize the activity on the file for all users. File statistics normally are written to the journal when the file is closed in lines that, when printed, start with:

ST $$$ FILE='filename'

Only those statistics whose value is not zero are printed.

File statistics might not appear for every CLOSE command issued. When many users are working with one file, the file is kept open until the last user issues a CLOSE command. The statistics appear along with the last CLOSE. System termination prints file statistics for each file still open at the end of the run.

Journal statistics Summary

In the context of file monitoring (the journal produces many other statistics useful for system tuning) these statistics should be of interest to the File Manager:

Term	Number of...
BADD	Fields added to Table B
BCHG	Fields changed in place in Table B
BDEL	Fields deleted from Table B
BXCHNG	Changes to Ordered Index B-Tree entry length
BXDELE	Deletions of Ordered Index B-Tree attribute-value pair entries
BXNEXT	Lateral moves in an Ordered Index B-Tree entry range search
BXFIND	Finds of Ordered Index B-Tree attribute-value pair entries
BXINSE	Inserts of new Ordered Index B-Tree attribute-value pair entries
BXSPLI	Ordered Index B-Tree node splits, all levels
BXRFND	Ordered Index B-Tree refinds
BXFREE	Ordered Index B-Tree nodes emptied and freed
DIRRCD	Table B records searched
DKRD	Disk reads from the file
DKWR	Disk writes to the file
DUPDTS	Records written to the deferred update data sets for the file
DKUPTIME	Milliseconds of elapsed clock time that it has taken Model 204 to write a file's pages to disk and to mark it "physically consistent" on disk. Includes all time spent writing pages, even if disk updates are interrupted, as indicated by the message: M204.0440: FILE filename DISK UPDATE ABORTED
IXADD	Index entries added to Tables C and D, including attempts to add duplicates
IXDEL	Index entries deleted from Tables C and D
PNDGTIME	Milliseconds of elapsed clock time that a file waited to be written to disk, after the last update unit completed
RECADD	Records, not including extension records, started in Table B
RECDEL	Records, not including extension records, deleted from Table B (does not include records deleted by DELETE RECORDS or IFDSET)
REQ	Requests and DISPLAY commands run on the file
RETRYA	Page retries in Table A
RETRYC	Page retries in Table C
UPDTTIME	Milliseconds of elapsed clock time that an open file has been part of at least one update unit

File Statistics

Two of the VIEW commands are useful for file monitoring:

VIEW TABLES

A VIEW (or V) TABLES command produces (for the current or specified file):

CURFILE ROBTEST CURRENT FILE CURLOC (LOCAL) CURFILE LOCATION IF REMOTE ASTRPPG 400 TABLE A STRINGS PER PAGE ATRPG 1 TABLE A ATTRIBUTE PAGES FVFPG 1 TABLE A FEW VALUED FIELD PAGES MVFPG 1 TABLE A MANY VALUED FIELD PAGES ASIZE 3 PAGES IN TABLE A BSIZE 100 PAGES IN TABLE B CSIZE 1 PAGES IN TABLE C DSIZE 100 PAGES IN TABLE D ESIZE 100 PAGES IN TABLE E XSIZE 0 PAGES IN TABLE X FREESIZE 888 PAGES IN FREE SPACE ARETRIES 0 TABLE A PAGE RETRIES BRECPPG 256 TABLE B RECORDS PER PAGE XRECPPG 256 TABLE X SLOTS PER PAGE BRESERVE 17 TABLE B RESERVE SPACE XRESERVE 17 TABLE X RESERVE SPACE PER PAGE BREUSE 20 FREE SPACE REQUIRED TO REUSE TABLE B PAGE XREUSE 20 FREE SPACE REQUIRED TO REUSE TABLE X PAGE BPGPMSTR 0 TABLE B PAGES/MASTER AREA BPGPOVFL 0 TABLE B PAGES/OVERFLOW AREA BEXTOVFL 0 TABLE B EXTRA OVERFLOW AREAS HIGHSORT -1 RECORD WITH HIGHEST SORT KEY BLOWPG 0 TABLE B LOWEST ACTIVE PAGE BHIGHPG 0 TABLE B HIGHEST ACTIVE PAGE XHIGHPG -1 TABLE X HIGHEST ACTIVE PAGE RECRDOPT X'00' RECORD OPTIONS BRLIMSZ 0 TABLE B RECORD LIMIT SIZE MSTRADD 10 RECORDS ADDED TO MASTER AREAS OVFLADD 0 RECORDS ADDED TO OVERFLOW AREAS EOVFLADD 0 RECORDS ADDED TO EXTRA OVERFLOW AREAS EXTNADD 0 EXTENSION RECORDS ADDED MSTRDEL 0 RECORDS DELETED FROM MASTER AREAS OVFLDEL 0 RECORDS DELETED FROM OVERFLOW AREAS EOVFLDEL 0 RECORDS DELETED FROM EXT OVFLOW AREAS EXTNDEL 0 EXTENSION RECORDS DELETED BREUSED 0 RECORDS ADDED REUSING RECORD NUMBERS XREUSED 0 EXTENSION SLOTS REUSED IN TABLE X SPILLADD 0 SPILL INDICATOR - ADDS SPILLDEL 0 SPILL INDICATOR - DELETES BQLEN 0 TABLE B QUEUE LENGTH XQLEN 0 TABLE X QUEUE LENGTH BAUTOINC 0 NUMBER OF PAGES FOR TABLE B AUTO INCREASE XAUTOINC 0 NUMBER OF PAGES FOR TABLE X AUTO INCREASE BAUTOTYP X'00' TABLE B AUTO INCREASE OPTIONS CRETRIES 0 TABLE C PAGE RETRIES DHIGHPG 4 TABLE D HIGHEST PAGE USED DPGSUSED 5 TABLE D PAGES IN USE DPGSRES 4 TABLE D PAGES RESERVED DRESERVE 15 LIST PAGE RESERVE SPACE DACTIVE 0 LIST PAGE ACTIVE PDSIZE 3 PAGES PER PROCEDURE DICTIONARY SECTION PDSTRPPG 128 NAMES/PROCEDURE DICTIONARY PAGE LIMIT OINODES 3 NO. ORDERED INDEX NODES: ALL LVLS OILEAVES 2 NO. ORDERED INDEX NODES: LEAVES OIDEPTH 2 NO. LEVELS OF ORDERED INDEX NODES OILPACT 0 ORDERED INDEX LIST PAGE ACTIVE OINENTRY 11 NO. ORDERED INDEX ENTRIES OINBYTES 154 NO. ORDERED INDEX BYTES DAUTOINC 0 NUMBER OF PAGES FOR TABLE D AUTO INCREASE EHIGHPG 0 TABLE E HIGHEST PAGE USED EPGSUSED 0 TABLE E PAGES IN USE

VIEW FPARMS (or FILE)

A VIEW (or V) FPARMS (the parameter FILE may be used as well) command produces (for the current or specified file):

CURFILE ROBTEST CURRENT FILE CURLOC (LOCAL) CURFILE LOCATION IF REMOTE FILEMODL X'00' (NONE) FILE MODEL ENFORCED FISTAT X'00' (OK) CURRENT STATUS OF FILE FICREATE 9 RELEASE 7.1 (OR BEFORE) CREATE FORMAT FITRANS 8 RELEASE V2R2 TRANSFORM FORMAT FIFORMAT 5 RELEASE 8.0 (OR LATER) CURRENT FPL FORMAT FOPT X'00' FILE OPTIONS FRCVOPT X'24' (NO CP LOGGING,NO RF LOGGING) FILE RECOVERY OPTIONS OPENCTL X'80' (PUBLIC) OPEN CONTROL FLAGS PRIVDEF X'BFFF' DEFAULT FILE PRIVILEGES PRCLDEF 0 DEFAULT USER CLASS FOR PROCEDURES SELLVL 0 DEFAULT SELECT FLS LEVEL READLVL 0 DEFAULT READ FLS LEVEL UPDTLVL 0 DEFAULT UPDATE FLS LEVEL ADDLVL 0 DEFAULT ADD FLS LEVEL SECTY X'00' LOW-LEVEL SECURITY IN EFFECT FILEORG X'01A4' (HALFWORD LENGTHS,REUSE RECORD NUMBERS,UNORDERED,ALL FIELDS COUNTED) FILE ORGANIZATION FIFLAGS X'1F' (FIELD-LEVEL CONSTRAINTS EXIST,NEW TBL C) FILE STATUS SWITCHES VERIFY X'00' WRITE VERIFY IVERIFY X'00' WRITE VERIFY - INITIALIZATION LANGFILE US LANGUAGE NAME FOR FILE

Sampling the file tables

While the V TABLES command shows, at a coarse level, the file utilization, often it is useful to see patterns of actual usage in your files. To do this, the TABLE? command can be used (Table B, TABLEC, TABLEE and TABLEX commands). There is also a special form of the TABLEB command: TABLEBX.

TABLEX command

The TABLEX command displays the space utilization of Table X.

TABLEX 479 AVG. FREE SPACE PER PAGE 18 AVG. FREE SLOTS PER PAGE 13 NUMBER OF PAGES PROCESSED 100 XRECPPG - TABLE X EXTENSION SLOTS PER PAGE 17 XRESERVE - TABLE X RESERVE SPACE PER PAGE

TABLEBX command

The TABLEBX command displays the space utilization for both Table B and Table X.

TABLEBX 4556 AVG. FREE SPACE PER PAGE 234 AVG. FREE SLOTS PER PAGE 2 NUMBER OF PAGES PROCESSED 500 BRECPPG - TABLE B RECORDS PER PAGE 17 BRESERVE - TABLE B RESERVED SPACE PER PAGE 479 AVG. FREE SPACE PER PAGE 18 AVG. FREE SLOTS PER PAGE 13 NUMBER OF PAGES PROCESSED 100 XRECPPG - TABLE X EXTENSION SLOTS PERPAGE 17 XRESERVE - TABLE X RESERVE SPACE PER PAGE

Additional details regarding Tables B and X can be obtained with other options of the commands such as:

TABLEX LIST TABLEBX LIST TABLEX PAGES n TO n TABLEBX PAGES n TO n

The RECLEN parameter and Table X

When the 'RECLEN' option is used on TABLEB or TABLEX, the output varies (as of V7R1.0), as follows:

If XSIZE=0:

• TABLEB RECLEN command generates the average logical record length,

meaning a base record and its extension records, all in Table B.

• TABLEX RECLEN command generates the following message:

***M204.2768: FILE filename HAS NO TABLEX PAGES

• TABLEBX RECLEN also generates the average logical record length.

If XSIZE>0

• TABLEB RECLEN command generates the average base record length in

Table B. No Table X extension record information is included.

• TABLEX RECLEN command generates the average individual extension

record length in Table X.

• TABLEBX RECLEN command generates the average logical records length,

meaning the base record in Table B and the extension records in Table X.

Tuning

Indexing decisions: Monitoring field retrievals in FIND statements

If you have defined a field as NON-KEY, NON-ORDERED, and NON-RANGE, you can monitor the use of the field in FIND statements using information written to the journal data set and redefine it as KEY, NUMERIC RANGE, or ORDERED when necessary.

Whenever such a field is used in a retrieval, an MS line is written to the journal with the message:

*** M204.0179: TABLE B SEARCH IMPLIED FOR FIELD = fieldname

This message indicates that a direct search of the data set might be required. It does not indicate whether the search was actually performed or how many records were searched (which depends on the results of any inverted conditions in the FIND statement).

The DIRRCD statistic provides a count of the total number of Table B records searched directly by FIND. DIRRCD appears in the journal and is accumulated by file, by user, by request, and for the entire system. DIRRCD also can be displayed by the TIME REQUEST command, described in the Model 204 Parameter and Command Reference.

Tuning the Hash Index

Because Table C is hashed, it can not dynamically increased, so the monitoring and tuning the hash index is critical to avoid file full conditions.

To understand the underlying architecture of Table C, see Table C (File Architecture)

.

For advice on monitoring and tuning Table C, please refer to: Tuning the Hash Index.

Reclaiming space in files

When a VISIBLE field is redefined, renamed, or deleted, space in the various Model 204 file tables is reclaimed for future reuse. The old name of a renamed field or the name of a deleted field is removed from Table A. If that field had the NUMERIC RANGE parameter, the auxiliary names also are removed. This also is true when a field is redefined from NUMERIC RANGE to NON-RANGE.

When a field name is deleted, the space used by that string in Table A is almost completely reclaimed (all but two bytes of overhead). The count of strings stored on the page is not decremented.

Note

Value string entries for CODED and FRV fields are never removed.

Index entries are removed from Table C for the old name of a renamed field, for a deleted field, and for redefinitions to NON-KEY, NON-RANGE, or NON-FRV.

Index entry spaces for the old name of a renamed field in Table D are reused for the new name. Index entries are removed for deleted fields and for certain redefined fields.

Field entries in Table B are removed for deleted fields that are not preallocated. Occurrences of preallocated fields are deleted, but their space is not deleted.