Dictionary/204 messages
Number | Message text |
---|---|
SHR000 | Access to <subsystem name> facility is not authorized |
Description: You are not authorized to use the facility you selected. Contact the administrator for that facility. | |
SHR001 | A facility may not invoke itself |
Description: You have attempted to invoke the facility you are currently using. Correct the facility name. | |
SHR002 | The <facility name> facility is not defined |
Description: You have attempted to invoke a facility that is not defined or is not installed. | |
SHR003 | The <facility name> facility is not currently active |
Description: You have tried to invoke a subsystem that has not yet been started. Check the facility name. If you typed it correctly, contact the facility administrator to start the facility. | |
SHR004 | The <facility name> facility requires system managers privilege |
SHR005 | Invoked facility <facility name> is no longer active |
Description: The facility you invoked has been stopped. Contact the facility administrator to start the facility. | |
SHR006 | Invoking facility <facility name> is no longer active |
Description: The facility you should have returned to after invoking another facility has been stopped. Contact the facility administrator to start the facility. | |
SHR010 | Enter a valid command or PF key |
Description: You have made an error typing a command or have pressed a PF key that does not exist for the particular screen you are on.
Shared messages SHR011-SHR016 appear in response to scrolling commands. | |
SHR011 | At bottom |
SHR012 | At top |
SHR013 | At left |
SHR014 | At right |
SHR015 | No data to display |
SHR016 | Scroll amount must be a positive integer. |
SHR020 | ON ATTN was hit, Use PF3 to QUIt |
SHR021 | <depends on the error> |
Description: Unexpected Model 204 error. Consult the Rocket Model 204 Messages wiki pages. | |
SHR022 | Unresolved enqueue conflict, reenter command or quit. |
SHR023 | Help text not found. Contact System Administrator. |
SHR024 | This PFkey or command is not supported. |
SHR025 | No defined action for ENTER key - please use PFkey or command-line. |
SHR026 | More text follows... |
SHR028 | Place search string on cmd line and press PF5 or precede with "LOC" |
SHR029 | Search string not located in text below. |
SHR031 | No help available from here |
SHR100 | <subsystem name>: Version <version> - Subsystem starting |
Description: This message is informational and is displayed by DICTIONARY and WORKSHOP facilities when they are started. | |
SHR110 | <subsystem name>: <err>: <error messages> |
Description: A fatal error has occurred that causes the facility to terminate. Record the message and contact the system manager or the administrator of the facility that you were running. | |
SHR111 | <subsystem name>: GTBL full, forced quit |
Description: The system has filled the global table during the execution of the facility. Contact the system manager or the administrator of the facility you were running. | |
SHR112 | WARNING: <filename> table B is xx% full. It has room for only yy additional records. |
SHR113 | INFORMATION: <filename> has an additional nn pages available. (FREESIZE = xx). |
SHR114 | WARNING: <filename> has no additional pages available (FREESIZE = 0). |
SHR115 | WARNING: <filename> table D is xx% full. It has room for only yy additional pages. |
SHR116 | WARNING: <filename> table A has had xx hashing retries. Time for REORG? |
SHR117 | WARNING: <filename> table C has had xx hashing retries. Time for REORG? |
DIC001 | Access to DICTIONARY facilities not allowed |
DIC002 | Enter a valid number |
DIC003 | Enter a valid command or a pf key |
DIC010 | Global variable table is full. Please exit session |
DDGEN messages
Number | Message text |
---|---|
DDG000 DDGEN | Run started |
DDG001 | No filename entered, DDGEN run stopped |
DDG002 | No workfile specified, DDGEN run stopped |
DDG003 | Read statement failed, Status is: |
DDG004 | Run has been cancelled |
DDG005 | Unresolved FIND conflict, run cancelled |
DDG006 | OPEN failed, skipping past filename: |
DDG007 | DDGEN utility end for this filename: |
DDG008 | File created under RELEASE 7.1 not supported in RELEASE 9.0 - File must be transformed to RELEASE 8.0 OR 8.1 before processing |
DDG009 | You are not authorized to view file parameters for |
DDG010 | Open statement failed, Status is: |
DDG011 | Error in reading procedure names, Status is: |
DDG012 | Error in reading procedure alias names, Status is: |
DDG01 | Illegal procedure name: |
DDG015 | Insufficient DDGEN release. DDGEN run cancelled. |
DDG016 | WARNING File created under 2.1 assumed. |
DDG017 | UNABLE TO PROCESS NON-TBO FILE WITH SYSOPT=4, CHANGE FILE TO TBO OR RESET SYSOPT. |
DDG018 | FICREATE UNRECOGNIZABLE. DDGEN RUN CANCELLED. |
DDG901 | Illegal error type, Status is: |
DDG999 | DDGEN RUN ENDED |
DDMIG Facility messages
Number | Message text |
---|---|
MIG001 | ON ATTN was hit. |
MIG002 | Unresolved enqueue conflict, unable to proceed. |
MIG003 | Invalid command syntax specified. |
MIG004 | @1 does not exist in the dictionary |
MIG005 | D204SYS is in use by another user, try again later. |
MIG006 | @1 is being updated in filemgmt. |
MIG007 | METADATA information already exists for @1. |
MIG008 | DATALINK information already exists for @1. |
MIG009 | No files have been exported. |
MIG010 | @1 has not been exported. |
MIG011 | All files have been deleted from D204SYS. |
MIG012 | @1 has been deleted from D204SYS. |
MIG013 | D204SYS has been updated since last LIST, do you want to continue? Y/N |
MIG014 | Parameter for IMPORT must be one of: ALL, CHECK, or a filename. |
MIG015 | Export record information incomplete, check status of D204SYS. |
MIG016 | All files have been deleted from D204SYS. |
MIG017 | BUG.........PAI INTO |
MIG018 | The parameter for DELETE must be ALL or a file name. |
MIG019 | Unable to open file D204SYS. |
MIG020 | Export VERSION number does not match Import VERSION. |
MIG021 | An invalid FILENAME was specified. |
MIG023 | @1 has already been exported. |
MIG024 | @1 has already been exported. |
MIG025 | @1 has staged commands. |
MIG026 | The following METADATA attribute fields are undefined: |
MIG027 | Report file does not exist or incorrectly specified. |
MIG028 | @1 already exists in the target-Dictionary. |
MIG029 | Duplicate entities found for @1. |
MIG030 | Error - check status of D204SYS. |
MIG031 | A file name must be specified for EXPORT. |
MIG032 | Import failed - the listed view(s) already exist in the dictionary. |
Dictionary Administration messages
Number | Message text |
---|---|
DIA001 | Select a valid command or a PF key |
DIA002 | Select a valid number |
DIA003 | Unresolved enqueue conflict, Reenter command or QUIt |
Description: The record you are trying to access is currently being used by another user. You may retry the command now or wait until user is finished. | |
DIA010 | Use PF6 to DELete the entity type or PF3 to QUIt |
DIA011 | Enter an account |
DIA012 | An entry for that account already exists |
DIA013 | There is no entry for that account |
DIA014 | Use an X to indicate selections |
DIA015 | Use PF12/END to update the DICTIONARY or PF3 to QUIt |
DIA016 | Account has been added |
DIA017 | Account has been updated |
DIA018 | Account has been deleted |
DIA019 | Maximum number of attributes has been added |
DIA020 | Maximum number of references has been added |
DIA021 | Enter entity type |
DIA022 | A definition for that entity type already exists |
DIA023 | Duplicate attribute value |
DIA024 | References cannot be added to system controlled entities |
Description: Users cannot update those entity types used by the system to maintain dictionary structure. | |
DIA025 | System reference types cannot be added |
Description: The reference type you are attempt to add has the same name as a system reference type. Select another name. | |
DIA026 | Entity type <TYPE> has been added |
DIA027 | Entity type <TYPE> has been updated |
DIA028 | Entity Type <TYPE> has been deleted |
DIA029 | There is no definition for that entity type |
DIA030 | Duplicate Reference |
DIA031 | Enter a path number |
DIA032 | Enter a valid path number |
DIA033 | Tagged items are invalid |
Description: No dictionary entries exist for the tagged entity types. | |
DIA034 | Path already exists |
DIA035 | The reference path has been defined |
DIA036 | The reference path has been replaced |
DIA037 | The reference path has been deleted |
DIA040 | UNQUALIFIED NAME cannot be added as a user attribute |
Description: UNQUALIFIED NAME is a system attribute and cannot be added as an attribute by a user. Select another name. | |
DIA041 | Invalid name for an attribute |
DIA100 | Enter valid entity type or 'all' |
Description: Either you have forgotten to name the entity type for which you want a report, or there is no dictionary entity for the named entity type. | |
DIA102 | Duplicate entity types found, contact Dictionary Administrator |
DIA103 | Specify output destination for report |
DIA104 | Specify Paper copy 'Y' or 'N' |
DIA105 | Specify Path Information 'Y' or 'N' |
DIA106 | Control Report Cancelled |
Description: You have used PA1 to halt the Entity and Path Report. | |
DIA107 | This entity type does not participate in a path |
DIA108 | There are no entity type definitions in the dictionary |
DIA109 | There are no reference paths defined in the dictionary |
DIA110 | There are no system relationships for this entity definition |
Description: You are on the Entity Type Maintenance screen and have selected to report on entity that has no system relationships listed. | |
DIA111 | There are no optional relationships for this entity definition |
Description: You are on the Entity Type Maintenance screen and have selected to report on an entity type that does not participate in any relationships with other entity types. | |
DIA112 | There are no system attributes for this entity definition |
Description: You are on the Entity Type Maintenance screen and have selected to report on an entity type that does not have any system controlled attributes. | |
DIA115 | DICTADMIN Inventory Report is being sent to the output device |
DIA201 | No facility record found for File Management |
Description: You are attempting to update File Management command execution options, but the dictionary cannot find a record for File Management. | |
DIA202 | Choose one or more command options |
DIA203 | Choose one default command option |
DIA204 | Indicate a USE file and/or a procedure file |
Description: You are on the File Management Commands Options screen and have selected the Inactive option without giving the name of a file to which procedures should be sent. | |
DIA205 | Use an X to select command options or defaults |
Description: This message is displayed on the File Management Options screen when a user enters any character other than an X to indicate a selection on the screen. | |
DIA206 | The default option must be one of the command options selected |
Description: This message is displayed on the File Management Options screen when the user selects an option that was not previously selected as one of the option the installation would support. | |
DIA207 | USE or PROC Filename must not begin with a number |
DIA208 | PROC Filename cannot begin with 'OUT' 'SYS' 'CCA' or 'TAPE' |
DIA209 | USE Filename cannot begin with 'SYS' 'CCA' or 'TAPE' |
DIA210 | Filename contains an invalid character |
DIA211 | Enter one option: add, rename, or delete |
DIA220 | No administration facilities are installed |
DIA221 | Warning, more than 8 admin facilities are installed |
DIA222 | Procedure name already exists. |
DIA223 | Enter new name for rename. |
DIA224 | Enter procedure name. |
DIA229 | Procedure name does not exist. |
DIA230 | Delete cancelled, press ENTER to continue |
DIA240 | No change to values on screen update not performed |
Description: You have not updated the screen, so no update to the dictionary is necessary. | |
DIA241 | VSAM TRANSPARENCY system tables have been changed |
DIA242 | Input must be numeric |
DIA243 | Input must be in valid range for table size |
DIA250 | The VSAMT control record was not found |
DIA255 | Update performed |
DIA900 | Entry not found in dictionary for this file or procedure. |
Dictionary Reports messages
Number | Message text |
---|---|
DIR001 | Select a valid option number |
DIR002 | Enter 'Y' or N for this option |
DIR004 | Enter a valid command or PF key |
DIR005 | No record with this type/name exists |
DIR006 | Null entry not allowed |
DIR007 | No such entity type exists |
DIR008 | Enter 'X' to select this option |
DIR009 | Null entity type not allowed |
DIR010 | This entity type cannot be widened |
Description: The WIDen command is available only for entity types with a file name prefix: RECORD, FIELD, FIELD GROUP, and PROCEDURE. | |
DIR011 | Select entity or enter QUIt |
DIR012 | Additional entities appear on next screen - Enter selection(s) |
Description: Indicates that the available entity types for the entity type report do not fit on one screen. Place an 'X' next to the entity type (s) you wish to select. Press enter to proceed to the next screen of entity types. When this message no longer appears, pressing enter will generate the report. | |
DIR015 | Select only one question and reenter |
Description: You have entered information for more than one question on the screen. Delete the information from one question, and press enter to generate the report. | |
DIR016 | Enter query criteria or enter QUIt |
DIR017 | Invalid entity type |
DIR018 | No such entry in dictionary |
DIR020 | Enter reference type |
DIR021 | No such reference type exists |
DIR022 | Select only 1 option and reenter |
Description: You have entered information for more than one option on the screen. Delete the information from one of the options, and press enter to generate the report. | |
DIR023 | Enter query criteria or enter QUIt |
DIR024 | Invalid entity type |
DIR025 | No such entry in dictionary |
DIR030 | Null keyword not allowed |
DIR031 | Invalid entity type entered |
DIR032 | Enter an option number - '1' through '4' |
DIR033 | Invalid attribute entered |
DIR034 | Attribute invalid with option selected |
DIR035 | No user written procedures are available |
Description: No user reports have been written for your installation. Press any PF key to exit from this screen and return to the Dictionary Reports main menu. | |
DIR036 | Additional reports appear on next screen |
Description: Indicates that all available user written reports do not fit on one screen. Place an 'X' next to the report you wish to select, if it appears on this screen. If it does not, press enter to proceed to the next screen of user written reports. | |
DIR037 | Report <report name> not found. Notify dictionary administrator. |
DIR038 | Enter an attribute |
Documentation messages
Number | Message text |
---|---|
DOC001 | Select a valid option number |
DOC002 | No such entity type exists |
DOC003 | No such entry exists |
DOC004 | Enter a valid command or pf key |
DOC005 | An entry with this name and entity type already exists |
DOC006 | Entity type is system controlled and can only be updated |
Description: The requested entity type is controlled by another facility. Entries of this type may not be added, renamed, copied, or deleted. Updating this entity type is allowed. | |
DOC007 | Enter 'Y' or 'N' for this option |
DOC008 | This entry is currently in use by another user |
DOC009 | Null entity type not allowed |
DOC010 | Request cannot be processed - required records are in use |
DOC011 | Documentation of this entity type is not authorized |
Description: You are not a user of the facility which controls this entity type. Therefore, you may not update entries of this type. | |
DOC012 | Enter an entry name |
DOC013 | Duplicate entries found for the tagged name. Contact system administrator. |
Description: DOCUMENT found more than one entry with this entity type and the name which has been tagged. Inform your system administrator of this error. | |
DOC014 | System controlled dummy entry - cannot be updated |
Description: The entry found is a dummy entry of a system controlled entity type. This entry may be updated only by the controlling facility. | |
DOC015 | Duplicate control records for this entity type. Contact system administrator. |
DOC016 | "Copy from or rename" name must be different than entry name |
Description: You entered the same name at the "Name:" prompt and the "Copy from or rename" prompt. Correct either name and reenter. | |
DOC017 | You are not authorized to modify any dictionary entries. |
DOC020 | Entry has been added |
DOC021 | Entry was not added - request was cancelled |
Description: You entered QUIt from Delete Entry. The new entry has not been saved. | |
DOC022 | Entry not added - required records in use |
DOC025 | Entry has been updated |
DOC026 | Entry was not updated - request was cancelled |
Description: You entered QUIt from Update an Entry. The new entry has not been saved. | |
DOC027 | Entry was not updated - required records are in use |
DOC030 | Entry has been deleted |
DOC031 | Entry has not been deleted - Request was cancelled |
Description: You entered QUIt from Delete. The entry has not been deleted. | |
DOC032 | Entry not deleted - it is in use by another user. Try later |
DOC033 | Entry was not found |
DOC040 | Entry has been copied |
DOC041 | Entry has not been copied - Request was cancelled |
DOC042 | Entry not copied - a required record is in use. Try later |
DOC043 | Entry not copied - entry to be copied was not found |
DOC044 | Entry not copied - Entity type not valid |
DOC050 | Entry has been renamed |
DOC051 | Entry has not been renamed - Request was cancelled |
DOC052 | Entry not renamed - a required record is in use. Try later |
DOC053 | Entry not renamed - entry to be renamed was not found |
DOC072 | Valid prefix commands are "I" and "D" |
DOC073 | Null entity type not allowed |
DOC074 | Entity type does not exist |
DOC075 | Number on command line is not a valid scroll amount |
DOC076 | Entry name is only valid widened item |
Description: You entered PF6 (WIDen) without placing the cursor on an entry name field. Place the cursor on the entry name you wish to widen and reenter the command. | |
DOC077 | This is a system reference and cannot be added |
Description: The reference type / reference name combination you have entered is controlled by another facility. You may not enter new references of this type. | |
DOC078 | References to staged entity types not allowed |
Description: You may not specify references to a STAGED FILE, STAGED FIELD, STAGED RECORD, or STAGED FIELD GROUP. Enter the non-staged version of the entity type instead. | |
DOC079 | Entry does not exist - dummy entry will be added |
Description: No entry exists with the specified entity type and name. If you save this reference, a dummy entry will be added for this entity. | |
DOC080 | Reference type is invalid for this entity type |
Description: You may not add new references that have not been defined by the administrator. | |
DOC099 | Entity type does not have a file name prefix and cannot be widened |
Description: The WIDen command is available only for entity types with a file name prefix: RECORD, FIELD, FIELD GROUP, and PROCEDURE. |
SUBSYSMGMT error messages
Number | Message text |
---|---|
SUM001 | Global table is full. Please QUIT. |
Description: The value of LBTBL is not sufficient for the subsystem application. LBTBL must be set to at least 100. | |
SUM002 | No changes have been made to the screen. |
Description: Type in input and press Enter or use a PF key to move to another screen. | |
SUM003 | Subsystem definition incomplete. Define OPERATION. |
SUM00 | Subsystem definition incomplete. Define PROCEDURE. |
SUM005 | Subsystem definition incomplete. Define SYSCLASS. |
SUM006 | Subsystem definition incomplete. Define USERDEF. |
SUM007 | Subsystem is active. Cannot modify SYSCLASS. |
Description: Issue STOP to change subsystem classes. | |
SUM008 | Unresolved enqueue conflict. Try again or QUIT. |
Description: Some part of the subsystem definition is being used by a subsystem or DICTIONARY user. | |
SUM009 | The default subsystem class is displayed as bright. |
SUM010 | CCA subsystem. Can only use USERDEF or user activity. |
Description: The definition of user classes is the only part of the subsystem definition that can be modified. The entire definition can be browsed. | |
SUM011 | ON ATTENTION was hit. Use PF3 to QUIT. |
SUM012 | Subsystem definition incomplete. Define FILEUSE. |
SUM051 | Not a valid subsystem activity selection. |
SUM052 | Not a valid user activity selection. |
SUM053 | PFkey or command only valid with subsystem Add, Modify, or Browse. |
SUM054 | Copy/Rename name is not valid with this selection. |
SUM055 | New subsystem name is required. |
SUM056 | Subsystem name is not valid with this selection. |
SUM057 | Subsystem name is required. |
SUM058 | Copy/Rename account is not valid with this selection. |
SUM059 | Copy/Rename account is not required for this selection. |
Description: Copy/Rename field has a value but is not needed for the selection. | |
SUM060 | Subsystem does not exist. |
SUM061 | Subsystem already exists. |
SUM062 | New subsystem already exists. |
SUM063 | User account is not valid with this selection. |
SUM064 | User account is required. |
SUM065 | Copy/Rename account is required. |
Description: Enter the name of the account to be copied/renamed. | |
SUM066 | User account does not exist. |
SUM067 | New user account already exists. |
SUM068 | Deletion CANCELLED. |
SUM069 | ____ copied to _____. |
SUM070 | Subsystem ______ deleted. |
SUM071 | Subsystem ______ renamed to ______. |
SUM072 | Account ______ copied to _______. |
SUM073 | Account ______ deleted. |
SUM074 | Account ______ renamed to _______. |
SUM075 | Invalid option. Enter QUIT or END. |
SUM076 | Invalid command, Pfkey, or no activity selected. |
SUM077 | Subsystem name contains illegal characters. |
SUM078 | New subsystem name contains illegal characters. |
SUM080 | No privileges have been assigned to @1. |
Description: An attempt was made to copy/rename/delete an account that has not been assigned ADMIN privileges. Check spelling of account name or assign user privileges. | |
SUM081 | No subsystems match specified name or pattern: @1. |
Description: Check spelling of name or pattern. | |
SUM082 | Value must be Y or N. |
SUM084 | Cannot delete CCA subsystems. |
SUM093 | PFkey or command only valid with MODIFY option. |
Description: On the main SUBSYSMGMT screen, the user pressed PF7/CMDprv and selected an option other than MODIFY. MODIFY is the only valid option for PF7/CMDprv. | |
SUM094 | Subsystem name or pattern is required. |
Description: On the main SUBSYSMGMT screen, the user pressed PF7/CMDprv and did not specify a name or pattern in the Subsystem Name field. | |
SUM096 | Refine criteria: # of subsystems classes exceeds max(1000). |
Description: On the Command Privileges screen, the max number of subsystem classes that may be processed at one time is 1000. If a user specifies a pattern in the Subsystem Name field that results in a list that exceeds 1000, then this message is displayed. | |
SUM098 | Press 12/END to make changes or 3/QUIt to exit. |
Description: On the Command Privilege screen, this message is displayed when a user hits PF3/QUIt in order to confirm that the user wants to quit without any updates applied. | |
SUM099 | No value specified for Subsystem Name. |
Description: On the Command Privilege screen, this message is displayed when the user hits PF4/LISt and does not supply any value in the Subsystem Name field. | |
SUM099 | No value specified for Subsystem Class. |
Description: On the Command Privilege screen, this message is displayed when the user hits PF4/LISt and does not supply any value in the Subsystem Class field. | |
SUM099 | SYNTAX ERROR IN PATTERN '<pattern>' NEAR CHARACTER <n> |
Description: On the Command Privilege screen, this message is displayed when the user hits PF4/LISt and supplies an invalid pattern the Subsystem Name or Subsystem Class fields. | |
SUM100 | Invalid status. Must be 1, 2, or 3. |
SUM101 | Value must be Y or N. |
SUM102 | Invalid hex value. |
Description: The value entered contains an invalid character or is not within the range of X'00' to X'FF'. | |
SUM103 | PUBLIC invalid with more than 1 Delete all but one class. |
Description: Use SYSCLASS to delete. using the SYSCLASS screen or use a semipublic or private status. | |
SUM104 | The value entered must be from 1 to 99999. |
SUM150 | Null values are not valid. |
SUM151 | Duplicate values for prefixes are not valid. |
SUM152 | Procedure names must begin with a prefix. |
SUM153 | Warning -Use of global XFER prohibits subsystem transfer. |
Description: XFER is a reserved variable that cannot be used on the Procedure Specifications Screen. | |
SUM154 | Global variable names must be identical. |
SUM155 | Global variable names must not contain ??, ?$, or ?&. |
SUM200 | The default subsystem class cannot be deleted. |
Description: A default class is required for public or semipublic subsystems. Do not delete this class or change the status to public. | |
SUM201 | Only one subsystem class is valid |
Description: The valid class is for public subsystems. default. Change the status to semipublic or private for multiple classes. | |
SUM202 | Procedure file must be entered. |
SUM203 | Value tagged is not valid or beyond acceptable range. |
Description: On the Command Privilege screen, the user entered an invalid value in the selection field for the Subsystem Name or Subsystem Class. The only valid value for the selection field is "x". | |
SUM204 | File names must start with a letter. |
SUM205 | Deferred ddnames must start with TAPE. |
SUM206 | Subsystem class already defined. |
SUM207 | Duplicate file on this screen. |
SUM208 | File already defined for this sub- system class. |
SUM209 | File name cannot have blanks. |
SUM210 | At first subsystem class. |
SUM211 | At last subsystem class. |
Description: Attempt made to browse beyond the last subsystem class. | |
SUM212 | PF10/PREV not available. |
SUM213 | A value must be specified for NUMLK when group value is Y. |
SUM214 | GROUP value must be Y when a value is specified for NUMLK. |
SUM215 | File name cannot begin with CCA, OUT, SYS, or TAPE. |
SUM216 | Deferred ddnames cannot have blanks. |
SUM250 | Previous subsystem class selected was number: |
SUM251 | No users are defined to this sub- system class. |
SUM252 | No subsystem classes defined. Use SYSCLASS. |
Description: Define subsystem classes by using the SYSCLASS screen before defining users for the classes. | |
SUM253 | No subsystem classes defined. |
SUM254 | Subsystem class number must be numeric. |
SUM255 | Subsystem class number cannot be zero or a negative number. |
SUM256 | Subsystem class number is greater than the number of classes. |
SUM257 | Account(s) already defined or duplicated on this screen. |
SUM258 | Default class is the only class. Cannot define users for it. |
SUM259 | Users cannot be added to the default subsystem class. |
SUM300 | A FIND conflict has occurred for this account. |
SUM301 | <n> Subsystem(s) enqueued. Press 6/DISplay to list. |
Description: On the Command Privilege screen, this message is displayed to inform the user that there are a number of subsystems that are not displayed on the list and cannot be updated due to enqueuing conflicts. | |
SUM302 | Classes enqueued, 6/DISplay or 12/END to perform partial update. |
Description: On the Command Privilege screen, this message is displayed to inform the user that there are a number of classes that cannot be updated at this time due to enqueuing conflicts. The user has the option to perform a partial update such that the Command Privileges for the classes that are not enqueued are updated. In addition, the user has the option to display the list of classes that are enqueued and cannot be updated. | |
SUM303 | <n> Class(es) about to be updated, press 12/END to confirm update |
Description: On the Command Privilege screen, this message is displayed when the user presses PF12/END in order to inform the user about the number of Subsystem Classes that are about to be updated. | |
SUM304 | No update, Command Privileges not changed for selected subsystems |
Description: On the Command Privilege screen, the user pressed PF12/END to update the Command Privileges but either the privileges were not changed or there were no Subsystem Classes that were selected for update. | |
SUM305 | Warning! 11/UPDate must be pressed now to save changes. |
Description: On the Command Privilege screen, the user pressed PF4/LIST to obtain a new list but the command privileges for the previous list were not saved. | |
SUM306 | Classes enqueued, 6/DISplay or 11/UPDate to perform partial update. |
Description: On the Command Privilege screen, this message is displayed to inform the user that there are a number of classes that cannot be updated at this time due to enqueuing conflicts. The user has the option to perform a partial update such that the Command Privileges for the classes that are not enqueued are updated. In addition, the user has the option to display the list of classes that are enqueued and cannot be updated. | |
SUM307 | <n> Class(es) about to be updated, press 11/UPDate to confirm update. |
Description: On the Command Privilege screen, this message is displayed when the user hits PF11/UPDATE in order to inform the user about the number of Subsystem Classes that are about to be updated. | |
SUM308 | Must use 4/LISt when changing Subsystem or Class patterns |
Description: The user entered a new value in the Subsystem Name or Subsystem Class field and pressed an invalid key. | |
SUM309 | Enter a valid command or pfkey. |
SUM400 | Contact System manager, no privileges have been assigned to user ID. |
Description: User must be assigned administrative privileges to use SUBSYSMGMT. | |
SUM401 | User does not have privileges for the selected option. |
Description: Only valid options for the assigned administrative privileges may be selected. | |
SUM402 | User has not been granted privileges for this subsystem. |
Description: System manager has not assigned the user administrative privileges for the selected subsystem. | |
SUM403 | @1 has been deleted from D204SYS. |
SUM404 | Select a valid PF KEY for Add, Modify, Browse. |
Description: Must select one of: PF2,PF4,PF5,PF6,PF9 for this option. | |
SUM405 | Value must be U or A. |
SUM406 | Duplicate METADATA entries for subsystem. |
SUM408 | Subsystem pattern is not valid for this selection. |
Description: Remove name or pattern and retry. | |
SUM409 | D204SYS is in use by another user. |
Description: Another user is executing an import/export command. | |
SUM410 | Import VERSION parameter does not match Export VERSION parameter. |
Description: Import/export must be between the same version of Model 204. | |
SUM411 | Unable to IMPORT @1, CCASYS fields undefined. |
Description: The subsystem to be imported contains fields which are not defined in the destination dictionary. | |
SUM412 | Cannot export CCA subsystems. |
SUM413 | @1 has not been exported. |
Description: Export the subsystem before importing. | |
SUM414 | Unable to IMPORT, fields undefined for @1 METADATA entry. |
SUM415 | Unable to locate import data. |
SUM416 | @1 is being updated by another user |
Description: Import/export attempted on a subsystem that is being updated by another user. | |
SUM417 | @1 Imported. Dummy entries were added for Procedures and/or Files. |
Description: The specified files from the import subsystem did not previously exist in the destination dictionary. | |
SUM418 | @1 has been @2. |
SUM419 | Reenter the command to confirm the deletion. |
SUM420 | No subsystems located or user does not have view privileges. |
Description: No subsystems have been exported or the user does not have ALL privileges for any of the exported subsystems. | |
SUM421 | No subsystems have been exported. |
SUM422 | Unable to open D204sys. |
Description: An error occurred while trying to open D204SYS. | |
SUM423 | ERROR - check status of D204SYS. |
SUM424 | No subsystems were located. |
SUM425 | Select privileges with an 'X'. |
SUM426 | Only assign one of: ALL, MODIFY, or BROWSE privileges. |
Description: A user has been assigned more than one admin privilege for the tagged subsystem. | |
SUM427 | Enter a subsystem name to locate. |
Description: Enter the subsystem name on the command line and press PF5. | |
SUM428 | Unable to locate subsystem: @1. |
SUM429 | WARNING: updates will not be saved. Reenter command to exit. |
SUM430 | Administrative privileges have been updated for @1. |
SUM431 | WARNING: all Userids will be deleted from @1. Reenter command. |
SUM432 | No users were located for SCLASS: @1 in subsystem @2. |
SUM433 | WARNING: @1 duplicates found. Reenter to execute. |
Description: A user ID to be copied already exists in an SCLASS. Select preview to display the list. | |
SUM434 | @1 Accounts have been copied. |
SUM435 | Cannot copy from the same subsystem. |
SUM436 | @1 Accounts have been copied. @2 Duplicates have been moved. |
Description: A user ID to be copied already exists in an SCLASS. The user ID was moved to the copy-to SCLASS. | |
SUM437 | Enter the Copy-from subsystem name. |
Description: Copy requires an SCLASS and subsystem name. | |
SUM438 | Enter the Copy-from Sclass name. |
Description: Copy requires an SCLASS and subsystem name. | |
SUM439 | For copy-from fields use one of: Copyuser, CPReplace, or Preview. |
Description: If not copying remove data from copy fields. if copying an invalid PF key was selected. | |
SUM440 | PF KEY or command not available in Browse mode. |
SUM441 | No duplicate Userids were located. |
SUM443 | Field: @1 is not defined in @2. |
SUM444 | BUG.............PAI INTO |
Description: An internal error has occurred while trying to import/export. | |
SUM445 | @1 has already been exported. |
Description: The subsystem must be deleted from D204SYS. If no longer needed use option 9 to delete the subsystem from D204SYS. | |
SUM446 | Unable to import, METADATA/DATALINK entries found for @1. |
Description: There is METADATA or DATALINK information for the specified subsystem to be imported. Delete or rename METADATA/DATALINK information. | |
SUM447 | Cursor not on positioned on a PRIVDEF value. |
Description: To select PF6, the cursor must be placed on a PRIVDEF field for a corresponding file. | |
SUM448 | This account may only update user definitions (PF 9). |
Cross-Reference Facility messages
Number | Message text |
---|---|
XRF001 | Help text not found. Contact System Administrator. |
XRF002 | Error from $BLDPROC. Contact System Administrator. |
XRF003 | Error from $LSTPROC on M204DCTL. Contact System Administrator. |
XRF004 | Unable to find default job procedure: |
XRF005 | Error in Displaying Browsed Procedures |
XRF006 | This PFkey or command is not supported. |
XRF007 | No defined action for ENTER key - please use PFkey or command line. |
XRF008 | XREF Facility is already in use by: |
XRF009 | Procedure file/group required. |
XRF010 | File/Group not open or incorrectly specified. |
XRF011 | Unexpected error from $RDPROC: |
XRF012 | Both ALL and individual report options were selected. |
XRF013 | Global name was not found - procedure cannot be expanded. |
XRF014 | Please specify "N" for Names or "P" for Patterns. |
XRF015 | Please specify at least one Procedure Name or pattern. |
XRF016 | Job Procedure is lacking placeholder: |
XRF017 | Please enter "Y" for Yes or "N" for No. |
XRF018 | Named procedure could not be found: |
XRF019 | Pattern matches no procedure names: |
XRF020 | Number of procedures found: |
XRF021 | WARNING: Modified data will not be stored. Repeat PFkey to |
XRF022 | Global variable name is missing. |
XRF023 | Non-null global variable value is required. |
XRF024 | This global name appears above on this line in your overall list: |
XRF025 | This global name appears below on this line in your overall list: |
XRF026 | BUG - Unable to locate profile record. |
XRF027 | Cannot scroll backwards. |
XRF028 | Cannot scroll forwards. |
XRF029 | More text follows... |
XRF030 | Bottom of text reached |
XRF031 | No help available from here |
XRF032 | Place search string on cmd line and press PF5 or precede with "LOC" |
XRF033 | Search string not located in text below. |
XRF034 | Top of text reached. |
XRF035 | Please use PFkeys instead of ATTN key. |
XRF036 | Request interrupted by ATTN key. |
XRF037 | Record is busy. |
XRF038 | Cross reference job has been submitted. |
XRF039 | The following line has been split for listing purposes. |
XRF040 | Request cancelled. |
XRF041 | File/Group successfully opened. |
XRF042 | Global name contains invalid character in column: |
XRF043 | The specified group has no procfile. |
XRF044 | The specified procedure is currently in use. |
XRF045 | Access to the specified procedure is not allowed. |
XRF046 | Nesting level too deep - maximum allowed is five. |
XRF047 | Command line parameters are incorrectly specified. |
XRF048 | No procedure file or group specified in user profile. |
XRF049 | All globals will be resolved from user profile - GTBL was too small. |
Description: The user might have stored some globals in GTBL immediately before using XREF, but did not leave sufficient free space (1000 bytes) for the XREF facility itself to use. Since GTBL cannot be increased without destroying its contents, GTBL is cleared, and all searches to resolve global dummy strings use the user's profile record. | |
XRF050 | Globals will be resolved from GTBL, then from user profile. |
Description: An informational message: XREF will refer to GTBL during searches to resolve global dummy strings. | |
Messages XRF100-XRF117 | |
Messages XRF100 to XRF117 describe errors detected during Cross Reference facility batch processing.
Messages XRF101 through XRF103 are displayed when the LPP parameter in the job control procedure is invalid or missing. | |
XRF100 | Unable to parse expression - check syntax |
Description: This message is displayed next to statements the parser is unable to recognize. The most common causes of this error are User Language syntax errors and incomplete syntax due to unresolved dummy strings. If you encounter this error for compilable code that does not contain unresolved dummy strings, contact Technical Support. | |
XRF101 | *** WARNING *** ILLEGAL CHARACTERS IN LINES PER PAGE PARM FILE... DEFAULT OF 55 USED |
XRF102 | *** WARNING *** ILLEGAL LINES PER PAGE VALUE... DEFAULT OF 55 USED |
XRF103 | *** WARNING *** LINES PER PAGE PARM FILE EMPTY... DEFAULT OF 55 USED |
XRF106 | IMAGE, ITEM OR ARRAY ITEM NOT DEFINED |
Description: An image, image array or image item contains an AT, AFTER, or DEPENDING ON clause that references another image, array, or item, but the name specified cannot be found in the current image block. This corresponds to Model 204 error message M204.1616. | |
XRF111 | <name> IS AN UNDEFINED STATEMENT LABEL |
XRF112 | <name> IS A MULTIPLY DEFINED STATEMENT LABEL |
XRF113 | <name> IS AN UNDEFINED IMAGE, MENU, SCREEN OR ITEM, OR EXTERNALLY DEFINED COMMON ITEM. |
XRF114 | <name> IS A MULTIPLY DEFINED IMAGE, MENU OR SCREEN |
Last line messages for Technical Support | |
XRF116 | INTERNAL PARSER ERROR. TYPE=xxxx. CONTACT CCA SUPPORT. |
Description: If this message appears in the last line of your CCAPRINT output, contact Technical Support and report the TYPE code. | |
XRF117 | INTERNAL LISTING ERROR. TYPE=xxxx. CONTACT CCA SUPPORT. |
Description: If this message appears in the last line of your CCAPRINT output, check for incorrect input in:
//CCAPROCI DD * Edit the XREF job while in the XREF subsystem (PF4=EDItjob) and ensure that the first lines in the XREF step are exactly these and nothing else: //XREF EXEC PGM=M204XREF //CCAPROCI DD * //*M204XREF /* Then resubmit the job. If the error reappears, contact Technical Support and report the TYPE code. |