RKTools installation: Difference between revisions

From m204wiki
Jump to navigation Jump to search
mNo edit summary
Line 6: Line 6:


==A summary of the RKTools installation steps==
==A summary of the RKTools installation steps==
Following is a brief checklist of installation steps:
Following is a brief checklist of installation steps. [[#Installing RKTools under CMS|Installing RKTools under CMS]] and [[#Installing RKTools under MVS|Installing RKTools under MVS]] describe these steps in greater detail.
<var class="product">RKTools</var>, whether for MVS or CMS.
The sections [[#Installing RKTools under CMS|Installing RKTools under CMS]] and [[#Installing RKTools under MVS|Installing RKTools under MVS]] describe these steps in greater detail for each operating system.
<ol>
<ol>
<li>Verify that your online is running <var class="product">Model 204</var> version 7.5 or higher.</li>
<li>Verify that your online is running <var class="product">Model 204</var> version 7.5 or higher.</li>

Revision as of 16:41, 21 October 2015

RKTools (Rocket Tools for Model 204) is a set of application subsystems (aka APSYs) running inside a Model 204 Online that provide full-screen and web-based tools to aid programmers, DBAs, and system managers. RKTools was formerly known as UL/SPF.

Installing RKTools requires downloading the SIRIUS file from the Model 204 maintenance website, and restoring it to your environment, setting up some subsidiary Model 204 files, and verifying that the environment has the appropriate parameter settings.

Upgrades to RKTools can almost always be handled by restoring a fresh copy of the SIRIUS file.

A summary of the RKTools installation steps

Following is a brief checklist of installation steps. Installing RKTools under CMS and Installing RKTools under MVS describe these steps in greater detail.

  1. Verify that your online is running Model 204 version 7.5 or higher.
  2. Allocate the space required for the SIRIUS data set, and RESTORE it from the DUMP files found on the website.

    In addition, there may be any number of other data sets required for the RKTools components you are installing. These are listed in Installation checklist (CMS) and Installation checklist (MVS).

  3. Update the Online JCL or EXEC:
    • Add the DD cards or FILEDEFs for the SIRxxxxx and/or JANxxx files.
    • Verify that the SYSOPT parameter has the 1 and 2 bits set.
  4. Update CCAIN parameters:
    • Increase NFILES, NDCBS, and NDIR for the SIRxxxxx and/or JANxxx files.
    • Verify that NORQS is at least 5.
    • Verify the online has at least 10 SDAEMON threads (each typically defined as an IODEV15).
    • SirPro and SirLib users are encouraged to set SIREDIT=X'53' , SIRCOMP=X'07' and COMPOPT=X'07' . These settings improve the programmer experience.
  5. Start the Online, using an ONLINE load module that contains the Sirius Mods.
  6. Open file SIRIUS and execute the following command:

    INCLUDE RKINSTALL

    Follow the instructions on the installation screen (and in the Help text for the screen).

  7. Add users to the appropriate SCLASSs for the RKTools APSYs.
  8. Verify success of the installation by compiling each RKTools APSY.
  9. Read RKTools server size and additional customization to determine if additional APSY-specific customizations are required at your site.
  10. Use the APSY named SIRADMIN to customize the RKTools environment.

Preparing for RKTools installation

The RKTools products are implemented as Model 204 subsystems. The code for all the component subsystems resides in the file named SIRIUS which is typically downloaded from the product section of the website.

Obtaining product installation files

The files necessary for the installation are available from the Rocket Software Model 204 maintenance website.

To download product files from the Rocket website:

  1. On the Rocket M204 Customer Care page, select the "Download SOUL files" link in the "Downloads and Uploads" section to access the "SOUL files for Sirius Software Inc." page.

    Note: Eventually you can also access the "SOUL files for Sirius Software Inc." page from the Rocket Customer Portal (RCP) accessed via the Support section of the Rocket website.

  2. After providing your registered customer login information, download the latest version of the SIRIUS file (which is labeled "All RKTools products in one file" followed by a version number).

    A "Click here" link on this page provides Help on downloading format, some information about different browser behaviors, file sizing information, and more.

Note: Re-installing RKTools typically involves nothing more than downloading and restoring a new version of the SIRIUS file.

Determining eligible products

To download files or maintenance from the Rocket M204 Customer Care area of the Rocket website, you must have a registered user ID (contact Technical Support if you need an ID). The website will show only products for which your organization is up to date on maintenance or rental payments. If a product does not appear on your download page and you believe it should, contact Technical Support.

Any step of the installation process may be bypassed if it applies only to a RKTools module you are not installing.

System requirements

  • RKTools operates in a Model 204 Online region.

    In the rest of this document, "Online" refers to a region of Model 204 running an ONLINE load module of at least the mimimum release level (RKTools version number matches the minimum required Model 204 version).

  • Requirements for server sizes and parameter settings for each product are listed in RKTools server size and additional customization.
  • To verify the products your online is authorized for, enter SIRIUS at the Model 204 command line

User privileges

The installing user must have:

  • Update access to the JCL or EXECs that bring up the host Online.
  • System Manager privileges, as well as access to the SUBSYSMGMT facility and the JCL or EXEC that runs the Online Model 204 region.

Full Install or Quick Install

  • Sites that have never installed RKTools must use the full installation, as there are a number of files to allocate and Model 204 parameters to update.
  • Sites that are re-installing the latest version of RKTools may use the quick-install or the full installation (some of which steps would already be complete, such as the allocation and initialization of SIRLOCAL).
  • If you are upgrading from a previous version or maintenance level, your site already has a SIRLOCAL file, which holds users' profiles and other local customizations. Your existing SIRLOCAL should be left intact and allocated to the Online, as the installation process uses SIRLOCAL information to determine which features should be upgraded.

A "Quick Install" for existing RKTools sites

You can verify the RKTools version either in the title of any RKTools Help screen, or by looking at the content of the VERSION procedure in the SIRIUS file.

Here are the "Quick Install" steps:

  1. In the Rocket M204 Customer Care page of the Rocket website, select the "Download SOUL files" link in the "Downloads and Uploads" section to access the "SOUL files for Sirius Software Inc." page.
  2. Download the latest version of the SIRIUS file (which is labeled "All RKTools products in one file" followed by a version number).
  3. Verify that the Online in which you are installing contains a version of the Sirius Mods equal to or greater than the RKTools version.
  4. Restore the SIRIUS file into a 4200-page file on your mainframe. The DDNAME for this file in your Model 204 regions is also SIRIUS.

    If you are upgrading from a previous release, simply overlay your old SIRIUS file.

  5. If your site uses the web version of SirMon, there is a change between Version 7.7 and 8.1 to the file that holds historical performance information. You should delete from the SirMon APSY definition the file MONDATA, and add the file SIRSTATS, allocated with at least 5000 pages.

    In file SIRIUS, run the procedure CREATE.SIRSTATS to define the fields in the SIRSTATS file.

The RKTools APSYs default to AUTOSTART but you can undo that setting if you like. SirScan, SirMon, and SirLib have SCLASS-sensitive code, so SCLASSes should not be renamed or redefined for these systems.

Use the APSY utility SIRADMIN to customize RKTools settings.

Installing RKTools under CMS

This section gives instructions for installing RKTools under CMS, including general system and software requirements. It assumes you have reviewed Preparing for RKTools installation for details about RKTools system requirements.

The SIRIUS Model 204 file, which contains the SOUL code that runs RKTools, can be obtained from the Rocket website. If installing from physical media, delivered by Rocket, the media will contain these files:

File name Contents
various Files required for the installation of Sirius Mods. See the Sirius Mods Installation Guide for more details.
RKTools DUMPSIRI A Model 204 dump of the SIRIUS file, which is required for all the subsystems.
RKTools DUMPFIX A Model 204 dump of the SIRFIXES file, (the use of which is now deprecated).

Installation steps:

  1. Install the Model 204.

    RKTools requires a matching or greater version number of Model 204.

  2. Allocate space for the RKTools files, and restore them from the distribution tape or from the dump files downloaded from the Rocket website.
    1. Define and format a minidisk to hold the RKTools installation files. 3400 4096-byte CMS blocks should be sufficient in all cases. This requires a 44-cylinder CMS minidisk on a 3390.
    2. Attach a tape drive at virtual address 181 to the owner of the installation minidisk defined in step A. Mount the RKTools distribution tape on this tape drive.
    3. Load the files appropriate to your site with the VMFPLC2 LOAD command. This can be done most simply with the following sequence of commands:

      TAPE REW VMFPLC2 LOAD (EOT

    4. Allocate space for the required Model 204 data sets. A skeleton exec, ULSPFAL, is provided for this purpose. Modify this exec to perform the allocations on the appropriate minidisks. Allocate space for the following data sets:
      SIRIUS 4200 pages; must always be allocated.
      SIRLOCAL 1200 pages; must always be allocated.
      SIRSTATS 60000 pages; only if you are installing SirMon.
      SIRFILED 1200 pages; only if you are installing SirFile.
      SIRLIBD 1200 pages; only if you are installing SirLib.
      SIRLIBP 1200 pages; only if you are installing SirLib.
      JANCAT 1200 pages; only if you are installing Janus OMNI.
      JANSSL 1200 pages; only if you are installing Janus Network Security.

      Attention: If you are upgrading from a previous release, keep your old copy of SIRLOCAL and any application-specific data files, like JANCAT, SIRLIBD, SIRFILED, or SIRSTATS. The installation process uses these files to determine whether to perform upgrade actions or new-installation actions.

    5. Restore the SIRIUS file with the LOADPROC exec.

      To restore, customize the FILEDEF inside the LOADPROC exec to conform to local standards. In addition, modify LOADPROC CCAIN to contain a valid login ID and password. If, for example, you are using the SIRIUS file for the first time, make sure it is created, opened, and initialized before the RESTORE.

      To run the LOADPROC exec, make sure the Online execs and load modules are on an accessed disk, then enter this command:

      ONLINE LOADPROC

  3. Complete steps 3 through the end in the "Installing RKTools under MVS" section, below.

Installing RKTools under MVS

This section gives instructions for installing RKTools under MVS, including the general system and software requirements. If you received your product on tape, the following instructions apply. If like most sites, you download products and updates from the Rocket website, see the instructions in A "Quick Install" for existing RKTools sites.

Note: The product installation tape for MVS has an internal label of SIRIUS, and it contains RKTools files in an IEBCOPY-unloaded PDS on file 3 of the tape. Before continuing, unless you have downloaded the product files from the website, you must load to disk the unloaded PDS before you can RESTORE the individual members to Model 204 files.

The following JCL loads the RKTools files to disk:

//LOADSIR JOB 0,CLASS=A,MSGCLASS=X,NOTIFY=ME //* //* Load RKTools products from tape //* //LIB EXEC PGM=IEBCOPY,REGION=0M //T1 DD UNIT=TAPE,LABEL=(1,SL),DSN=SIRIUS.LIB, // DISP=(OLD,PASS),VOL=SER=SIRIUS //T2 DD UNIT=TAPE,LABEL=(2,SL),DSN=SIRIUS.LOAD, // DISP=(OLD,PASS),VOL=SER=SIRIUS //T3 DD UNIT=TAPE,LABEL=(3,SL),DSN=SIRIUS.RKTools, // DISP=(OLD,PASS),VOL=SER=SIRIUS //* //D1 DD DISP=(,CATLG),SPACE=(CYL,(10,0,5), // DSN=SIRIUS.LIB,UNIT=SYSDA //D2 DD DISP=(,CATLG),SPACE=(CYL,(5,0,2), // DSN=SIRIUS.LOAD,UNIT=SYSDA //D3 DD DISP=(,CATLG),SPACE=(CYL,(44,0,2), // DSN=SIRIUS.RKTools,UNIT=SYSDA //SYSPRINT DD SYSOUT=* //SYSIN DD * COPY INDD=T1,OUTDD=D1 COPY INDD=T2,OUTDD=D2 COPY INDD=T3,OUTDD=D3 /*

The JCL includes references to these files:

File Num / Name Contents
1 / SIRIUS.LIB File required for the installation of Sirius Mods. See the Sirius Mods Installation Guide for more details.
3 / SIRIUS.RKTOOLS(DUMPSIRI) A Model 204 DUMP of the SIRIUS file that is required for all the subsystems.
3 / SIRIUS.RKFIX(DUMPFIX) A Model 204 DUMP of the SIRFIXES file. This file is deprecated and not necessary for this installation.

Installation checklist (MVS)

  1. Install Model 204.

    Note: The Model 204 version on the online in which RKTools will run must match or be greater than the RKTools version.

  2. Allocate the space required for the RKTools files. Note that the SIRIUS file has X'0221' privileges, which does not allow RESTORE. If you are creating a new SIRIUS file from scratch, this will not be a problem. But if you are restoring into your existing SIRIUS file, you will have to CREATE the file first (to wipe out existing content) before you execute the RESTORE. The command sequence is something like:

    CREATE FILE SIRIUS END CREATE OPEN FILE SIRIUS IN SIRIUS RESTORE 192 FROM <whatever>

    SIRIUS 4200 pages; must always be allocated.
    SIRLOCAL 1200 pages; must always be allocated.
    SIRSTATS 4000 pages; only if you are installing SirMon.
    SIRFILED 1200 pages; only if you are installing SirFile.
    SIRLIBD 1200 pages; only if you are installing SirLib.
    SIRLIBP 1200 pages; only if you are installing SirLib.
    JANCAT 1200 pages; only if you are installing Janus OMNI.
    JANSSL 1200 pages; only if you are installing Janus SSL.

    Attention: If you are upgrading from a previous release, keep your old copies of SIRLOCAL and any application-specific data files, like JANCAT, SIRLIBD, SIRFILED, or SIRSTATS. The installation process uses these files to determine whether to perform upgrade actions or new-installation actions.

  3. Restore SIRIUS, noting the following:
    • Modify LOADPROC in the JCL library created during the $functions installation (usually SIRIUS.Vxxx.LIB, where xxx is a version number) to refer to an appropriate load module and CCAxxxxx files. Note that LOADPROC may have been customized for your site to include only those files relevant to your installation process.
    • Rename database DSNs to conform to local standards.
    • Provide a valid logon ID and password for the CCAIN stream for this job. If, for example, you are using the SIRIUS file for the first time, make sure it is created, opened, and initialized before the RESTORE.
  4. Update the Online JCL or EXEC:
    1. Add DD (MVS) cards or FILEDEFs (CMS) for the RKTools files. The following list identifies the files for which DD cards or FILEDEFs may be needed:
      SIRIUS Must always be allocated.
      SIRLOCAL Must always be allocated.
      SIRSTATS If installing SirMon and using the web interface.
      SIRFILED If installing SirFile.
      SIRLIBD, SIRLIBP If installing SirLib.
      JANCAT If installing JANUS OMNI Access Module.
      JANSSL If installing JANUS SSL Module.
    2. Verify that the Online environment allows the use of file groups and APSY subsystems.
      • To use permanent file groups, the Online must have allocated an initialized CCAGRP file, and the SYSOPT parameter must contain the 2 bit.
      • To use APSYs, an Online must have allocated an initialized CCASYS file (with all fields defined), and the SYSOPT parameter must contain the 1 bit.
      For more information about APSYs and file groups, see File groups and System requirements for Application Subsystems.
  5. Verify the Online has a minimum of 10 Sdaemon threads allocated. Each of these threads is typically defined as IODEV15.
  6. Modify the User 0 stream.

    Adjust these parameters:

    NFILES Increase by the number of RKTools files.
    NDCBS Increase by the number of RKTools files.
    NDIR Increase by the number of RKTools files.
    NORQS Verify setting is at least 5.
  7. Start the Model 204 Online region, verifying that it points to a load module containing the Sirius Mods.
  8. Issue OPEN FILE SIRIUS (no password is required), and execute the following command:

    INCLUDE RKINSTALL

    This procedure performs all installation functions for new users, and all upgrade functions for reinstalling users. No user profiles or other site-specific customization will be lost. If any problems are encountered while running this procedure, correct the problem and re-execute.

    The procedure RKINSTALL also builds an APSY subsystem called RKINSTALL. If installations need to be re-run, the subsystem may be invoked rather than the procedure.

    During APSY execution, some error messages are not suppressed to aid in diagnosing any installation problems. For example, you will be able to see if an installation failed because a file was enqueued in a different Online, etc.
  9. Add users to the appropriate SCLASSes for any private or semi-public RKTools APSYs.

    The installing user is automatically added to the administration SCLASS in all RKTools APSYs.

  10. Verify the installation of the subsystem(s) by compiling all of the subsystems.
    Enter ... To test the ...
    SIRSCAN START Journal scanner
    SIRFILE START File monitoring subsystem
    SIRPRO START Developers' environment
    SIRMON START Online performance monitor
    SIRLIB START Change management system
    JANCAT START Janus OMNI Table manager
    JANSSL START Janus SSL certificate management system

    If any of these subsystems fails to compile, ensure that the subsystem is STOPped, and run it under TEST DEBUG mode. For example, to determine why SIRSCAN failed to compile, enter:

    TEST DEBUG SIRSCAN

  11. Review the RKTools server size and additional customization section, below, for specific requirements of individual APSY components of RKTools.

Note: CCATEMP usage may increase with RKTools. CCATEMP should be monitored (VIEW TEMPSIZE, VIEW TEMPMAX) to ensure that sufficient space is allocated to accommodate the additional activity.

RKTools server size and additional customization

The minimum RKTools server size requirements are listed below. The actual server size requirements may vary slightly, because of table settings in the local Online Model 204 regions, and because of slight differences between UTABLE requirements in different versions of Model 204.

Subsystem name Minimum server
SIRSCAN 180K
SIRDBA 180K
SIRFILE 230K
SIRPRO 750K
SIRLIB 135K
SIRADMIN 150K
SIRMON 220K
RKTools 135K

UTABLE and other parameter settings

Initial problems with RKTools subsystems are usually associated with one or two extremely small default UTABLE settings. Running the failing APSY in TEST DEBUG mode will highlight UTABLE parameters that need to be increased.

Note: One parameter that must be set for SIRMON, SIRPRO, and SIRSCAN is SCRNSTBL, which is necessary for the use of screen objects.

RKTools required parameter minimums
ParameterValue
SCRNSTBL 12000

Additional setup for SirLib

Read and follow the instructions in the appendix "Getting Started" in the SirLib User's Guide.

Additional setup for SirScan

The SirScan administrator may use SIRADMIN option 4 to set default I/O and record maximums for users in the various SirScan SCLASSes. This is described at the beginning of the SirScan User's Guide.

Additional setup for SirMon

When users are added to SCLASSes, note that there is a special BUMP SCLASS. Any user added to this SCLASS gains the ability to BUMP other users. This class does not provide access to customizing options in SirMon. Only users in the ADMIN SCLASS are able to add custom screen definitions to SirMon.

If the SirMon background monitor is to be used, add the following line to User 0's input stream:

SIRMON BACKGROUND

The background monitor may also be started automatically in a BATCH2 thread or an sdaemon thread. Consult the SirMon documentation for details.

You can customize statistic thresholds or use the supplied defaults to establish problem conditions.

As of RKTools Version 6.8, SirMon has a feature to send warnings to e-mail addresses and cell phones (via e-mail). This feature requires Janus Sockets and a started Janus Sockets port.

Additional setup for SirFile

If the SirFile background monitor is to be used, add the following line to User 0's input stream:

SIRFILE BACKGROUND

As with SirMon, the background monitor may be started automatically in a BATCH2 thread or in an sdaemon thread, and you can consult the SirFile User's Guide for details.

You can customize the system and file-specific thresholds or use the supplied defaults to establish problem conditions.

RKTools access privileges and SCLASSes

Each component application of RKTools has its own APSY definition and privileges associated with SCLASSes. If you have a good reason for doing so, you can redefine any of the RKTools APSYs as PUBLIC, SEMI-PUBLIC, or PRIVATE. Contact Rocket Software if you are unsure of the effect of a proposed change.

RKTools on the Web

Web-specific versions of the RKTools subsystems are actively being developed and supported, and they are available to sites that own Janus Web Server.

All the RKTools APSYs can be used on the web via Janus Web Legacy Support, which simply translates the 3270 screens of the underlying product into HTML. Web-specific versions of both SirScan and SirMon can be invoked by setting up some Janus Web Server web rules.

Setup for web-based SirScan

Web-based SirScan is very lightweight, and requires a minimum of web rules to run.

  1. Define a Janus Web Server port.
  2. Define the following rule to invoke SirScan:

    JANUS WEB portname ON /SIRSCAN/* CMD 'SIRSCAN *'

  3. The above rule will make SirScan available, but it will not necessarily require a logon to the system, so you will need to add rules to force users to log in as well:

    JANUS WEB portname DISALLOW /SIRSCAN/* JANUS WEB portname ALLOW /SIRSCAN/* USER *

  4. Because the above rules force users to login, the port on which SirScan runs should either:
    • Be only on a company intranet.
    • Be SSL protected, to prevent userids and passwords from being sent over the internet in clear text format.

    The above rules will work on an unprotected port, but it is very strongly recommended that this feature only be used when SSL protection is in effect.

Setup for web-based SirMon

This applies only to RKTools Version 8.1 and later.

Because web-based SirMon employs XML, XSLT, Javascript, a stylesheet and some graphics, the web rules needed to run SirMon on the web are a little more complex:

  1. Define a Janus Web Server port.
  2. Define the following rules to invoke SirMon:

    JANUS WEB portname TYPE ANY *.PNG IMAGE/PNG JANUS WEB portname TYPE ANY *.CSS TEXT/CSS JANUS WEB portname TYPE ANY *.JS APPLICATION/X-JAVASCRIPT JANUS WEB portname ON /*.CSS OPEN SIRIUS SEND *.CSS JANUS WEB portname ON /SIRMON/* CMD SIRMON JANUS WEB portname ON /SIRMON/*.GIF OPEN SIRIUS SEND *.GIF EXPIRE +2147483 JANUS WEB portname ON /SIRMON/*.PNG OPEN SIRIUS SEND *.PNG EXPIRE +2147483 JANUS WEB portname ON /SIRMON/*.JS OPEN SIRIUS SEND *.JS BINARY EXPIRE +2147483 JANUS WEB portname ON /AJAX/* OPEN SIRIUS SEND * JANUS WEB portname ON /AJAX/*.JS OPEN SIRIUS SEND *.JS TEXT JANUS WEB portname ON /AJAX/*.UL OPEN SIRIUS CMD 'INCLUDE *.UL' JANUS WEB portname DISALLOW /SIRMON/* JANUS WEB portname ALLOW /SIRMON/* USER * JANUS WEB portname TYPE ANY *.XML TEXT/XML JANUS WEB portname TYPE ANY *.XSL TEXT/XSL JANUS WEB portname ON /SIRMON/*.XSL OPEN SIRIUS SEND *.XSL EXPIRE +2147483 JANUS WEB portname ON /SIRMON/*.CSS OPEN SIRIUS SEND *.CSS EXPIRE +2147483 JANUS WEB portname ON /SIRMON/TEXTJS/*.JS OPEN SIRIUS SEND *.JS TEXT EXPIRE +2147483 JANUS WEB portname ON /SIRMON/BUILDJS/*.JS CMD SIRMON OPEN SIRSTATS IN SIRSTATS INITIALIZE KEEPDEFS

  3. The above rules will make SirMon available, but they will not necessarily require a logon to the system, so you will need to add rules to force users to log in as well:

    JANUS WEB portname DISALLOW /SIRMON/* JANUS WEB portname ALLOW /SIRMON/* USER *

  4. Because the above rules force users to login, the port on which SirMon runs should either:
    • Be only on a company intranet.
    • Be SSL protected, to prevent userids and passwords from being sent over the internet in clear text format.

    The above rules will work on an unprotected port, but it is very strongly recommended that this feature only be used when SSL protection is in effect.

    Note: Using SirMon on the web also requires the SIRSTATS file. As shown in the above web rules, SIRSTATS can be re-initialized each time the Online comes up. SIRSTATS contains historical snapshots of system performance, and the file will fill up if not archived or reinitialized on occasion.