SoftSpy messages: Difference between revisions

Revision as of 19:01, 3 August 2015

Introduction

This topic contains information on all messages issued by SoftSpy.

Terminal message format

Most SoftSpy messages are displayed on the user's terminal. A few are issued to the audit trail.

Messages have the following general format:

SPY.nnn : message type : message text

where:

SPY.nnn is the message identifier. The word SPY indicates that the message is a SoftSpy message, and nnn is the SoftSpy message number. The message identifier is not present for errors issued using the SoftSpy ERROR command.

message type is Error, Warning, or Bug. The absence of a message type indicates the message is an informational message.

message text is a brief explanation of the situation that caused the message to be issued. A complete description of the cause of each message, and any corrective action that should be taken, is given in this topic. The messages are documented in numerical order. A gap in the numeric sequence indicates an unused message number.

Message documentation format

SoftSpy messages are documented in the following format:

Message Number	The number of the SoftSpy message.
Message Type	The message type is either Bug, Error, Informational, or Warning.
Message Text	The text of the message as it appears on the user's terminal, except for generic terms, such as a keyword, for which SoftSpy substitutes the appropriate value.
Description	A description of the SoftSpy message. While some descriptions are easily understood, others are longer and more complex, identifying several distinct causes of the message.
Response	The required response, an indication to notify the SoftSpy Administrator, or an indication that no response is required.
Administrator	The required response, if any, for the SoftSpy Administrator.

Messages

This topic lists the SoftSpy error messages and responses. A gap in the message number sequence indicates unused message numbers.

Messages 1-25

Number	1
Type	Error
Text	`command_name` is an unknown SoftSpy command.
Description	The command issued is not a recognizable SoftSpy command, either because it is not a valid command, or because the command is not valid within the context that it is being issued.
Response	Correct the command and retry.

Number	2
Type	Informational
Text	Unable to establish SoftSpy server.
Description	An IODEV=55 thread was unable to create a SoftSpy server, or, a SPY SERVER command was not successful. This message will be preceded by an error message explaining the reason why the SoftSpy server could not be established.
Response	Respond as indicated in the accompanying error message.

Number	3
Type	Informational.
Text	SoftSpy was not turned on.
Description	A SPY OFF command was issued, but SoftSpy was not turned on.
Response	No response is required.

Number	4
Type	Error.
Text	Invalid `command_name` syntax, `token_list` expected.
Description	The syntax of the command name issued requires a keyword, parameter or window identifier that cannot be found.
Response	Correct the command syntax and retry.

Number	5
Type	Informational.
Text	A new request has been compiled.
Description	A new user language request has been compiled.
Response	No response is required.

Number	6
Type	Error.
Text	Label `label_name` was not found.
Description	A JUMP TO statement has been executed that specifies a label name that is not contained within the currently executing macro.
Response	Correct the macro and retry.

Number	7
Type	Error.
Text	Invalid STEP value.
Description	An invalid step amount has been entered. If a step amount is specified it must be an integer between 1 and 2147483647 inclusive.
Response	Correct the step amount and retry.

Number	8
Type	Error.
Text	PF`n` is undefined.
Description	A program function key that is not currently defined has been pressed.
Response	If an incorrect program function key was pressed by accident, then press the correct program function key. If the program function key should be valid, then issue the PF command to assign a command to the program function key.

Number	9
Type	Informational.
Text	SoftSpy has already been turned on.
Description	A SPY ON command was issued, but SoftSpy was already turned on.
Response	No response is required.

Number	10
Type	Error.
Text	No SoftSpy servers are currently available.
Description	All SoftSpy servers are currently in use.
Response	Wait until a current SoftSpy user issues a SPY OFF command and then reissue the SPY ON command, or log on to a different Model 204 thread which has an output page buffer size that matches a currently available SoftSpy server. Alternatively, request that your SoftSpy administrator increase the number of SoftSpy servers.
Administrator	Increase the number of SoftSpy servers if warranted. The installation guide contains information on how to define IODEV=55 threads for SoftSpy servers for future active jobs. Additional SoftSpy servers can be created within the current online job by issuing the SPY SERVER command from a Model 204 terminal session. However, that terminal session will not be available for any other use until the online is brought down.

Number	11
Type	Error.
Text	No SoftSpy servers exist.
Description	No SoftSpy servers can be found.
Response	Contact your SoftSpy administrator.
Administrator	If no IODEV=55 threads are included in the CCAIN input stream, they must be added. The installation guide contains information on how to define IODEV=55 threads for SoftSpy servers. If IODEV=55 threads are defined, issue the SPY EDIT CONFIG command. Press PF 8 (Forward), and examine the configuration. If the current date is after the expiration date, or the configuration specifies a start date that is after the current date, then contact Technical Support for a key with new dates. If the CPU model and serial number do not match your processor, contact Technical Support with your current CPU model and serial number for a new key. If the configuration is valid, then examine the audit trail lines for the IODEV=55 threads, and contact Technical Support.

Number	12
Type	Informational.
Text	Duplicate items not watched.
Description	A WATCH command for at least one item that is already being watched has been issued.
Response	No response is required.

Number	13
Type	Bug.
Text	Problem retrieving compilation information.
Description	SoftSpy has detected a system error.
Response	Contact your SoftSpy Administrator.
Administrator	Contact Technical Support for assistance, and have the audit trail available.

Number	14
Type	Error.
Text	Break point was not set on this line.
Description	An attempt was made to clear a break point on a line where no break point had been set.
Response	Check that the current line is set to the line which contains the break point and retry, or clear the prefix command from the line. Specify CLEAR ALL to clear all break points.

Number	15
Type	Error.
Text	Maximum number of jumps exceeded.
Description	More than $JUMP_LIMIT JUMP TO commands have been specified. This can happen if an infinite or recursive loop has been coded within a macro, or if more than $JUMP_LIMIT JUMP TO statements have been coded.
Response	Correct the macro logic, split the macro into two, or increase the jump limit, and retry.

Number	16
Type	Error.
Text	Invalid prefix command.
Description	A prefix command has been entered which is not valid within the context of the prefix area.
Response	Correct the prefix command and retry.

Message number	17
Type	Bug.
Text	Serious window problem - please quit.
Description	SoftSpy has detected a system error.
Response	Exit SoftSpy and re-enter to allow for remedial maintenance, and report the problem to your SoftSpy administrator.
Administrator	Contact Technical Support for assistance.

Message number	18
Type	Error.
Text	Break points can only be set on executable statements.
Description	An attempt has been made to set a break point on a line which is not executable. Examples of lines which are not executable are continuation lines, comment lines, screen definition statements and other types of declare statements.
Response	Set the break point on an executable statement.

Message number	19
Type	Error.
Text	Invalid label `label_name`.
Description	A SoftSpy label name can only contain alphanumeric or underscore characters, and the first character must be an alphabetic character.
Response	Correct the label name and retry.

Message number	20
Type	Informational.
Text	{ ACL `acl_identifier` \| MACRO `macro_identifier` } has been saved.
Description	A SAVE command has been issued successfully.
Response	No response is required.

Message number	21
Type	Informational.
Text	For the exclusive use of `customer_name`.
Description	This confirmation message will appear when SoftSpy is initiated.
Response	No response is required.

Message number	22
Type	Error.
Text	Past expiration.
Description	The expiration date specified on the configuration screen has passed.
Response	Contact your SoftSpy Administrator.
Administrator	Contact Technical Support for assistance.

Message number	23
Type	Error.
Text	Expiration date must not be a date in the past.
Description	Valid expiration dates must be greater than or equal to the present day.
Administrator	Correct the expiration date and retry.

Message number	24
Type	Error.
Text	ON interrupt level exceeded.
Description	Too many nested levels of ON interrupt processing have been detected.
Response	Reduce the recursive calling of the interrupt chain.
Administrator	Contact Technical Support for assistance.

Message number	25
Type	Error.
Text	Current file privileges are not adequate to read and update CCASYS.
Description	The password used to open the file CCASYS does not have sufficient privileges to perform the installation process. The password used must have update privileges.
Administrator	The installation process requires the CCASYS file to be open with update privileges. Open the file with a password that has the appropriate privileges, and retry.

Messages 26-50

Number	26
Type	Error.
Text	Window `window_identifier` is not defined.
Description	The DELETE WINDOW command has been issued with a window identifier of an undefined window.
Response	Check that the specified window is defined and reissue the command.

Number	27
Type	Informational.
Text	Another subsystem named SoftSpy already exists.
Description	An attempt to run the install procedure has been made while a subsystem named SoftSpy already exists. A prompt will be displayed with the option to overwrite.
Administrator	Check that it is valid to replace the existing subsystem and reply 'Y' to the prompt to overwrite.

Number	28
Type	Error.
Text	Source window may not be closed.
Description	The CLOSE WINDOW command has been issued with a window identifier of SOURCE. The SOURCE window cannot be closed.
Response	To close a watch window, issue the CLOSE WINDOW command with the name of an opened watch window.

Number	29
Type	Error.
Text	New name may not be the same as the original name.
Description	A COPY or RENAME command has been issued where the first acl identifier or macro identifier is equal to the second acl identifier or macro identifier.
Response	Correct the command syntax and retry.

Number	30
Type	Informational.
Text	SoftSpy subsystem has not been created.
Description	An attempt to create a SoftSpy subsystem has been abandoned.
Response	No response is required.

Number	31
Type	Error.
Text	{ ACL `acl_identifier` \| MACRO `macro_identifier` } does not exist.
Description	A command has been issued specifying an acl identifier or macro identifier that does not exist.
Response	Reissue the command with the name of an existing acl identifier or macro identifier.

Number	32
Type	Error.
Text	{ ACL `acl_identifier` \| MACRO `macro_identifier` } already exists.
Description	The second acl identifier or macro identifier specified in the COPY or RENAME command already exists.
Response	Reissue the command with a unique acl identifier or macro identifier.

Number	33
Type	Error.
Text	Window `window_identifier` has already been defined.
Description	The window identifier specified in the DEFINE WINDOW command already exists.
Response	Reissue the command with a unique window identifier.

Number	34
Type	Error.
Text	Invalid syntax - error in file context.
Description	The file specified in the context argument is not currently open or the file does not exist.
Response	Reissue the command specifying an open file as the file context.

Number	35
Type	Informational.
Text	SoftSpy subsystem has been created.
Description	The SoftSpy subsystem has been installed.
Response	No response is required.

Number	36
Type	Warning.
Text	No watch items match pattern.
Description	An operand or pattern specified in an UNWATCH statement did not match any items in the window specified in the IN WINDOW clause, or in the default window if IN WINDOW was omitted.
Response	No response is required.

Number	37
Type	Error.
Text	`keyword` must be an integer in range `n` to `m`.
Description	A command has been processed with a parameter value outside the permitted range.
Response	Correct the parameter value and retry.

Number	38
Type	Error.
Text	Invalid PF key context.
Description	The PF command takes an optional context argument that indicates the context (screen) under which the PF key is to be defined. Allowable values are BROWSE, COMPILE_ERROR, EDIT, EVAL, HELP, LIST, and SETUP.
Response	Correct the syntax and reissue the command.

Number	39
Type	Informational.
Text	Procedure ending.
Description	This message indicates that an installation process has been aborted.
Response	No response is required.

Number	40
Type	Error.
Text	Insufficient space in GTBL to store global.
Description	An attempt to issue the SET command has failed because the global table is full.
Response	Exit SoftSpy and either issue a UTABLE command from the Model 204 command line to increase the size of the global table or alter the procedure that issues the UTABLE command for the application being debugged, and retry.

Number	41
Type	Bug.
Text	{ ACL `acl_identifier` \| MACRO `macro_identifier` } is not unique.
Description	SoftSpy has detected a system error.
Response	Contact your SoftSpy Administrator.
Administrator	Contact Technical Support for assistance.

Number	42
Type	Error.
Text
Description	The current userid does not have the correct privilege to process the command issued.
Response	Contact your SoftSpy Administrator.
Administrator	If ADMIN privilege is required, use SUBSYSMGMT to add the sclass for that user to the SoftSpy subsystem. For any other privilege, add the userid to the ACL required for the requested function.

Number	43
Type	Error.
Text	`userid` is not a valid USERID.
Description	An invalid user ID has been specified. It is either more than ten characters in length, or it contains a semicolon, comma, equals sign, or space.
Administrator	Correct the ID and retry.

Number	44
Type	Error.
Text	Full screen terminal required.
Description	An attempt has been made to use SoftSpy from a single line entry terminal.
Response	Log on using a 3270 terminal.

Number	45
Type	Bug.
Text	Failure in GO command.
Description	SoftSpy has detected a system error.
Response	Contact your SoftSpy Administrator.
Administrator	Contact Technical Support for assistance, and have the audit trail available.

Number	46
Type	Error.
Text	Macro nesting level too deep.
Description	SoftSpy macros allow a maximum of ten nesting levels.
Response	Rewrite the macros so that less nesting occurs.

Number	47
Type	Informational.
Text	Print command terminated.
Description	ATTN has been keyed at the M204 command prompt when a PRINT command was issued.

Number	48
Type	Bug.
Text	Unable to find default window.
Description	SoftSpy has detected a system error.
Response	Contact your SoftSpy Administrator.
Administrator	Contact Technical Support for assistance.

Number	49
Type	Error.
Text	Unable to reset `parameter` in UTABLE.
Description	A UTABLE command has failed for the specified parameter. SoftSpy was not started.
Response	Contact your SoftSpy Administrator.
Administrator	Verify that a server of the required size is available for SoftSpy.

Number	50
Type	Error.
Text	Unmatched quotation mark.
Description	An attempt has been made to process a pattern or operand that is missing either an opening or a closing quotation mark.
Response	Correct the syntax and retry.

Messages 51-75

Number	51
Type	Error.
Text	String not found.
Description	A LOCATE command has failed to find any occurrence of the string specified.
Response	Verify that the locate was performed in the correct window and the correct direction. The LOCATE command searches for a specified string or pattern within the default window. If the command is prefixed with a minus sign then the search begins with the line preceding the current line and continues backward, otherwise the search begins with the line following the current line and continues forward. The default window can be temporarily altered for the duration of the LOCATE command by prefixing it with an IN WINDOW command.

Number	52
Type	Error.
Text	Error while processing M204 command `model_204_command`.
Description	A Model 204 command, issued using the SoftSpy M204 command, has been rejected. Either the command is invalid or the server does not have the Model 204 privileges required to perform the command.
Response	Either correct the command syntax or exit SoftSpy and issue the command from the Model 204 command line.

Number	53
Type	Error.
Text	No items were requested.
Description	A WATCH or DISPLAY command has been specified without an operand. The WATCH and DISPLAY commands require at least one operand.
Response	Correct the command syntax and retry.

Number	54
Type	Error.
Text	PF key number must be in the range from 1 to 12.
Description	An invalid number has been specified for the PF command.
Response	Correct the command syntax and retry.

Number	55
Type	Error.
Text	PF key labels may not exceed 9 characters.
Description	A label has been specified which exceeds the maximum number of characters allowed.
Response	Reduce the label to 9 characters or fewer and retry.

Number	56
Type	Error.
Text	Operand of type `operand_type` is not valid in the current context.
Description	An operand type has been used that is not valid in the current context.
Response	Refer to SoftSpy operands for an explanation of the available operand types and their syntax. Correct the command syntax and retry.

Number	57
Type	Error.
Text	Invalid input, `value` expected.
Description	Invalid data has been specified in an input field.
Administrator	Correct the data and retry.

Number	58
Type	Error.
Text	Insufficient storage is available.
Description	There is insufficient storage available to run SoftSpy.
Response	Contact your SoftSpy Administrator.
Administrator	Either the region size specified is too small or, if running under a non-VA environment, the SPCORE parameter is too small. Increase the appropriate value and restart the online.

Number	59
Type	Error.
Text	'`delimiter`' is an invalid delimiter '{ , }' expected. or '`delimiter`' is an invalid delimiter '{ = }' expected.
Description	An invalid delimiter has been specified.
Response	Correct the command syntax using the expected delimiter, and retry.

Number	60
Type	Error.
Text	`operator` is an invalid relational operator.
Description	Logical expressions can only contain one of the following operators: EQ, NE, LT, LE, GT, GE, =, ¬=, <, <=, >, >=.
Response	Correct the command syntax and retry.

Number	61
Type	Bug.
Text	RDPROC open error. Reason code = `reason_code`.
Description	An installation procedure has terminated due to a file error.
Response	Contact your SoftSpy Administrator.
Administrator	Contact Technical Support for assistance, and have the audit trail available.

Number	62
Type	Error.
Text	Invalid operand type for SET command.
Description	The SET command only supports assignment of values to Global, Percent and SoftSpy variables, Fields, and certain SoftSpy functions.
Response	Correct the command syntax and retry.

Number	63
Type	Bug.
Text	RDPROC get error. Reason code = `reason_code`.
Description	An installation procedure has terminated due to a file error.
Response	Contact your SoftSpy Administrator.
Administrator	Contact Technical Support for assistance, and have the audit trail available.

Number	64
Type	Warning.
Text	Cannot begin collecting `operand` now.
Description	COLLECT cannot be used if data is currently being collected and statements in the current request have been executed since collection was initiated.
Response	Issue the UNCOLLECT * command, then retry.

Number	65
Type	Error.
Text	Invalid { NEXT \| LAST } history value.
Description	A NEXT or LAST command has been entered with an invalid value.
Response	Specify an integer between 1 and 99 (inclusive) to represent the number of statements, and reissue the command.

Number	66
Type	Error.
Text	SPY ON used to invoke SoftSpy subsystem.
Description	The EDIT CONFIG command must be issued by a user defined to the ADMIN SCLASS of the SoftSpy subsystem; therefore EDIT CONFIG cannot be issued from within the SoftSpy server.
Administrator	Issue the SoftSpy EDIT CONFIG command from the Model 204 command line to edit the SoftSpy configuration.

Number	67
Type	Error.
Text	Mismatched parentheses.
Description	A DISPLAY, WATCH or PF command has been issued containing an operand with mismatched parentheses.
Response	Correct the command by enclosing the operand in parentheses, and retry.

Number	68
Type	Error.
Text	PF key label requested must be quoted.
Description	A PF command has been issued with an incorrect optional label parameter. The `label` parameter specifies a label for the program function key and must be no more than 9 characters long. The label can consist of a single unquoted word containing no special characters, or it can consist of a character string constant operand.
Response	Correct the command syntax and retry.

Number	69
Type	Error.
Text	The source window cannot be a watch window.
Description	A WATCH command has been issued for the SOURCE window, but the SOURCE window is not a watch window. This can happen either if there is not a watch window open, or if IN WINDOW SOURCE is specified.
Response	Either open a watch window or change `window_identifier` in the IN WINDOW command, and retry.

Number	70
Type	Error.
Text	Invalid syntax - unexpected '`characters`'.
Description	Erroneous data has been found after the expected end of the command specified.
Response	Correct the command syntax and retry.

Number	71
Type	Informational.
Text	Request cancelled.
Description	The SoftSpy command QUIT has been issued causing the currently executing user language procedure to be cancelled.
Response	No response is required.

Number	72
Type	Error.
Text	Invalid parameter request.
Description	The parameter requested does not exist.
Response	SoftSpy will allow the display of all Model 204 system and file parameters. Correct the command syntax and retry.

Number	73
Type	Error.
Text	Invalid statistic context.
Description	A statistic operand with an invalid context has been specified.
Response	User partial and final statistics may be displayed by SoftSpy by enclosing the following four terms within parentheses: EVAL (default), LOGIN, STMT, or SPY. For a detailed explanation of this topic, refer to the statistic operand section of SoftSpy operands. Correct the command syntax and retry.

Number	74
Type	Error.
Text	Invalid statistic requested.
Description	An invalid statistic has been requested.
Response	Two different types of statistic can be specified: normal Model 204 user statistics and current usage of server table. For a detailed explanation of this topic, refer to the statistic operand section of SoftSpy operands. Correct the command syntax and retry.

Number	75
Type	Error.
Text
Description	A SET command has been issued where the specified expression does not resolve to a value that can be assigned to the specified operand.
Response	Correct the expression and retry.

Messages 76-100

Number	76
Type	Error.
Text
Description	A SET command has been issued for `percent_variable_operand` when the context is not EVAL, or for `global_variable_operand` when the context is neither EVAL nor COMPILE_ERROR.

Number	77
Type	Error.
Text	Asterisk is an invalid occurrence number.
Description	An asterisk cannot be specified as the occurrence number for a field_operand.
Response	If a field is specified without an occurrence number, then occurrence one is assumed. Correct the command syntax and retry.

Number	78
Type	Warning.
Text	No { ACL \| MACRO } matches `pattern`.
Description	The pattern specified does not match with any acl identifier or macro identifier.
Response	Modify `pattern` and retry.

Number	79
Type	Error.
Text	The remaining authorization record may not be deleted.
Description	If there is only one authorization record, it cannot be deleted.
Administrator	Remove the request (X) to delete the record and retry.

Number	80
Type	Error.
Text	Break point is already set on this statement.
Description	An attempt has been made to set a break point on a line where a break point already exists.
Response	Check that the current line is set to the line on which you want to set the new break point or issue the B prefix command on the desired line.

Number	81
Type	Error.
Text	ROW must be an integer between 1 and `n`.
Description	An OPEN WINDOW or DEFINE WINDOW command has been issued with an invalid ROW sub-parameter.
Response	Reissue the command with a valid ROW sub-parameter.

Number	82
Type	Error.
Text	COLUMN must be an integer between 6 and 77.
Description	An OPEN WINDOW or DEFINE WINDOW command has been issued with an invalid COLUMN sub-parameter.
Response	Reissue the command with a valid COLUMN sub-parameter.

Number	83
Type	Error.
Text	Invalid authorization key.
Description	An invalid authorization key for the usage of SoftSpy has been entered on the SoftSpy Edit Config Screen.
Administrator	Contact Technical Support for a valid authorization key.

Number	84
Type	Warning.
Text	Only `n` statements have been executed.
Description	A LAST `n` command has been issued where `n` is greater than the number of statements executed so far.
Response	No response is required.

Number	85
Type	Bug.
Text	{ ACL `acl_identifier` \| MACRO `macro_identifier` } is multiply defined.
Description	SoftSpy has detected a system error.
Response	Contact your SoftSpy Administrator.
Administrator	Contact Technical Support for assistance.

Number	86
Type	Error.
Text	Operand `operand` must be quoted and prefixed with type.
Description	If an operand does not begin with an alphabetic character, or it contains any non-alphanumeric character, then the operand must be enclosed in quotes. The operand must be prefaced with a type indicator unless it is to be treated as a literal string.
Response	Refer to SoftSpy operands for an explanation of the available operand types and their syntax. Correct the command syntax and retry.

Number	87
Type	Bug.
Text	Invalid source program line number.
Description	SoftSpy has detected a system error.
Response	Contact your SoftSpy Administrator.
Administrator	Contact Technical Support for assistance.

Number	88
Type	Bug.
Text	Invalid message number.
Description	SoftSpy has detected a system error.
Response	Contact your SoftSpy Administrator.
Administrator	Contact Technical Support for assistance.

Number	89
Type	Error.
Text	Bottom row must be at least 2 larger than the top row.
Description	An OPEN WINDOW or DEFINE WINDOW command has been issued with an invalid ROW parameter. The `bottom_line` sub-parameter must be at least two larger than the `top_line` sub-parameter.
Response	Reissue the command with valid ROW sub-parameters.

Number	90
Type	Error.
Text	Right column must be at least 2 larger than the left column.
Description	An invalid OPEN WINDOW or DEFINE WINDOW command has been issued with the COLUMN parameter. The `right_column` sub-parameter must be at least two larger than the `left_column` sub-parameter.
Response	Reissue the command with valid COLUMN sub-parameters.

Number	91
Type	Bug.
Text	The current user is already a SoftSpy server.
Description	SoftSpy has detected a system error.
Response	Contact your SoftSpy Administrator.
Administrator	Contact Technical Support for assistance, and have the audit trail available.

Number	92
Type	Bug.
Text	Invalid argument.
Description	SoftSpy has detected a system error.
Response	Contact your SoftSpy Administrator.
Administrator	Contact Technical Support for assistance, and have the audit trail available.

.

Number	93
Type	Bug.
Text	SoftSpy function invoked but SoftSpy not enabled.
Description	SoftSpy has detected a system error.
Response	Contact your SoftSpy Administrator
Administrator	Contact Technical Support for assistance, and have the audit trail available.

Number	94
Type	Bug.
Text	Required function argument not present.
Description	SoftSpy has detected a system error.
Response	Contact your SoftSpy Administrator.
Administrator	Contact Technical Support for assistance, and have the audit trail available.

Number	95
Type	Bug.
Text	Argument not of required type.
Description	SoftSpy has detected a system error.
Response	Contact your SoftSpy Administrator.
Administrator	Contact Technical Support for assistance, and have the audit trail available.

Number	96
Type	Informational.
Text	User disconnected.
Description	The SPY OFF command has been issued successfully.
Response	No response is required.

Number	97
Type	Error.
Text	Invalid SPY command syntax.
Description	A SPY command has been issued with an invalid parameter. Refer to SoftSpy commands and macros for a detailed explanation of the SPY command.
Response	Correct the command syntax and retry.

Number	98
Type	Error.
Text	Unable to open window without required attributes.
Description	An OPEN WINDOW command has been issued without the required ROW and/or COLUMN parameters specifying the placement of the window on the screen. These parameters would be optional if they had been previously specified in the DEFINE WINDOW command. For a more detailed explanation of this topic, refer to OPEN WINDOW.
Response	Reissue the command with the missing placement parameters.

Number	99
Type	Error.
Text	Windows may not share rows.
Description	A newly opened window must not overlap with the rows of any currently open window.
Response	Correct the ROW sub-parameter and retry.

Number	100
Type	Error.
Text	{ `acl_identifier` \| `macro_identifier` \| `label` \| `variable` } is invalid.
Description	An acl identifier, macro identifier, SoftSpy variable, or window identifier can only contain alphanumeric or underscore characters, can only be 20 characters or less, and the first character must be an alphabetic character (or a dollar sign if it is a SoftSpy variable).
Response	Correct the command syntax and retry.

Messages 101-125

Number	101
Type	Error.
Text	Help is not available for `topic`.
Description	No help topic matches the pattern specified.
Response	Refine the topic pattern, or issue the HELP command without a pattern and browse the index.

Number	102
Type	Informational.
Text	Request cancelled, `error_message`.
Description	A user language run time error has caused the currently executing request to be cancelled.
Response	Operands can still be viewed using the DISPLAY and WATCH commands. The LAST and NEXT commands might be useful in determining the cause of the error.

Number	103
Type	Warning.
Text	No history exists beyond the next executable statement.
Description	A NEXT `n` command has been issued when the current position in the history of executed statements is the most recently executed statement. The current line is set to the first line of that statement.
Response	No response is required.

Number	104
Type	Error.
Text	Window `window_identifier` is already open.
Description	Windows that are already open cannot be opened.
Response	Reissue the command with a window identifier of an unopened window.

Number	105
Type	Error.
Text	Window `window_identifier` is not open.
Description	A command has been issued that requires the specified window to be open.
Response	Reissue the command with the name of an open window.

Number	106
Type	Bug.
Text	Unable to set break point -- insufficient storage.
Description	SoftSpy requires a small amount of storage to set break points, but the storage allocated to the online is not large enough.
Response	Contact your SoftSpy Administrator.
Administrator	The region size specified is too small. Increase the region size and restart the online.

Number	107
Type	Error.
Text	More than one watch window exists, specify a window identifier.
Description	A WATCH command has been specified when the source window is the default window and more than one watch window is open.
Response	Use the IN WINDOW clause or change the default window using the DEFAULT WINDOW command.

Number	108
Type	Error.
Text	Non-negative integer value required for `keyword`.
Description	A command has been issued that requires an integer value greater than or equal to zero for a parameter, but one could not be found.
Response	Reissue the command with a valid value.

Number	109
Type	Error.
Text	Function `$function` does not exist.
Description	The command contains an invalid `$function`.
Response	Correct the command syntax and retry.

Number	110
Type	Informational.
Text	{ ACL `acl_identifier` \| MACRO `macro_identifier` } renamed to { `acl_identifier` \| `macro_identifier` }.
Description	The `acl_identifier` or `macro_identifier` specified has been successfully renamed to the new `acl_identifier` or `macro_identifier` specified.
Response	No response is required.

Number	111
Type	Informational.
Text	{ ACL `acl_identifier` \| MACRO `macro_identifier` } copied to identifier.
Description	The `acl_identifier` or `macro_identifier` specified has been successfully copied to the new `acl_identifier` or `macro_identifier` specified.
Response	No response is required.

Number	112
Type	Informational.
Text	{ ACL `acl_identifier` \| MACRO `macro_identifier` } deleted.
Description	The `acl_identifier` or `macro_identifier` specified has been successfully deleted.
Response	No response is required.

Number	113
Type	Error.
Text	Name is required.
Description	A command has been specified that requires an `acl_identifier`, `macro_identifier`, or `window_identifier`, but none was found.
Response	Correct the command syntax and retry.

Number	114
Type	Error.
Text	Invalid scroll amount.
Description	A BACKWARD, FORWARD, LEFT or RIGHT command has been issued with an invalid scroll amount. Valid scroll amounts for BACKWARD and FORWARD are half, full, and `n` with `n` representing the number of lines to scroll. Valid scroll amounts for LEFT and RIGHT are half, full, max and `n`.
Response	Correct the command syntax and retry.

Number	115
Type	Error.
Text	No SoftSpy command has been specified.
Description	The SoftSpy subsystem has been entered without an accompanying SoftSpy command.
Response	Retry specifying a command.

Number	116
Type	Error.
Text	There is no command to repeat.
Description	A REPEAT command has been issued when no preceding command has been issued.
Response	Use the command line to perform the desired operation.

Number	117
Type	Warning.
Text	Information available for `n` previously executed statements.
Description	A LAST `n` command has been issued, where `n` exceeds the number of previously executed statements. SoftSpy will display history back to the first executable statement.
Response	No response is required.

Number	118
Type	Error.
Text	Not a permitted operating system.
Description	An attempt to initialize a SoftSpy server has failed. This message will be found on the audit trail.
Administrator	Contact Technical Support for assistance.

Number	119
Type	Error.
Text	No SoftSpy servers with the same output page buffer size exist.
Description	No SoftSpy servers are defined whose output page buffer size matches that of the terminal used to issue the SPY ON command.
Response	Use a terminal whose output page buffer size matches that of the SoftSpy servers. Alternatively, request that your SoftSpy administrator create a SoftSpy server.
Administrator	The `SoftSpy Installation Guide` contains information on how to define IODEV=55 threads for SoftSpy servers for future active jobs. Additional SoftSpy servers can be created within the current online job by issuing the SPY SERVER command from a Model 204 terminal session whose output page buffer size matches that of the terminal used for the debugging session. However, that terminal session will not be available for any other use until the online is brought down.

Number	120
Type	Error.
Text	No SoftSpy servers with the same output page buffer size are available.
Description	All the SoftSpy servers whose output page buffer size match that of the user issuing the SPY ON command are in use.
Response	Wait until a current SoftSpy user issues a SPY OFF command and then reissue the SPY ON command, or log on to a different Model 204 thread which has an output page buffer size that matches a currently available SoftSpy server. Alternatively, request that your SoftSpy administrator increase the number of SoftSpy servers.
Administrator	The `SoftSpy Installation Guide` contains information on how to define IODEV=55 threads for SoftSpy servers for future active jobs. Additional SoftSpy servers can also be created within the current online job by issuing the SPY SERVER command from a Model 204 terminal session. However, that terminal session will not be available for any other use until the online is brought down.

Number	121
Type	Bug.
Text	Config record is missing.
Description	SoftSpy has detected a system error.
Response	Contact your SoftSpy Administrator.
Administrator	Contact Technical Support for assistance.

Number	122
Type	Bug.
Text	Incorrect authorization key.
Description	An invalid authorization key for the usage of SoftSpy has been detected.
Response	Contact your SoftSpy Administrator.
Administrator	Contact Technical Support for a valid authorization key.

Number	123
Type	Error.
Text	Arrays may not have more than three dimensions.
Description	An image item or percent variable with more than three subscript values has been specified.
Response	If the image item or percent variable is an array, then subscript values must be provided for each dimension. Correct the command syntax and retry.

Number	124
Type	Error.
Text	System manager privileges are required to install SoftSpy.
Description	An attempt has been made to run a User Language procedure that requires System Manager privileges.
Administrator	Log on with a System Manager userid to install SoftSpy.

Number	125
Type	Error.
Text	`file_name` could not be opened. Procedure ending.
Description	An attempt to open a file has failed during the SoftSpy installation process.
Administrator	Enter a password that will open the file with update privileges.

Messages 126-150

Number	126
Type	Error.
Text	COMMAND command nesting level too deep.
Description	The COMMAND command allows a maximum of ten nesting levels.
Response	Reissue the command so that COMMAND does not call itself more than ten times.

Number	127
Type	Error.
Text	`percent_variable_operand` is undefined.
Description	The SET command has been issued for a percent variable that is currently undefined. The percent variable could be defined outside the current scope; for example, in a complex subroutine.
Response	Verify the variable name and retry.

Number	128
Type	Error.
Text	Invalid subscript specification for { `global_variable` \| `percent_variable_operand` \| `SoftSpy_variable` }.
Description	The SET command has been issued for an operand with one of the following errors: no subscript was specified and one was required the number of subscripts specified does not match the number of elements in the array one or more of the subscripts specified is out of range one or more subscripts have been specified but the operand is not defined as an array.
Response	Either remove the subscript or specify a valid subscript, and retry.

Number	129
Type	Error.
Text	`operand` requires the interactive { DEBUGGING \| PERFORMANCE TUNING } feature.
Description	A command has been issued with the applicable option disabled.
Response	Contact your SoftSpy Administrator.
Administrator	Contact Technical Support for a valid authorization key.

Number	130
Type	Warning.
Text	The operand was set but the value was truncated.
Description	The SET command has been issued for a value whose length is greater than the length of the target specified. The value was truncated to the length of the target operand.
Response	No response is required.

Number	131
Type	Informational.
Text	A new request has failed to compile.
Description	A new user language request has failed to compile.
Response	No response is required.

Number	132
Type	Informational.
Text	Evaluation error: `error`.
Description	A non-cancelling evaluation time error has occurred.
Response	No response is required.

Number	133
Type	Error.
Text	Input arguments may not be set.
Description	A SET command has been issued for an input argument of a complex subroutine.
Response	A value may only be set in an input argument prior to the call to, or after the return from the complex subroutine.

Number	134
Type	Error.
Text	Too many terms specified in logical expression.
Description	A logical expression has been specified that contains more than five distinct operands, or more than ten distinct operands and operators combined.
Response	Reduce the expression.

Number	135
Type	Error.
Text	`parameter combination` is invalid.
Description	A conflicting parameter combination has been found in the SHOW or COLLECT command.
Response	Specify a valid combination, and retry.

Number	136
Type	Error.
Text	Simple expression exceeds 30 characters.
Description	A simple expression that exceeds 30 characters in length has been specified for a subscript or parameter for a function.
Response	Correct the command syntax and retry.

Number	137
Type	Error.
Text	{ JUMP \| RETURN \| TRANSFER \| $JUMP_LIMIT } may only be used in a macro.
Description	A command that is only valid within a macro has been issued outside of a macro.

Number	138
Type	Error.
Text	Invalid printer specification.
Description	An invalid parameter has been specified in an OPEN PRINTER statement.
Response	Correct the parameter and retry.

Number	139
Type	Error.
Text	UNKNOWN value for expression in `command` command.
Description	A command has been issued with an expression whose value cannot be resolved.
Response	Correct the expression and retry.

Number	140
Type	Error.
Text	Invalid print parameter value.
Description	A print parameter value has been specified that contains non-alphanumeric characters.
Response	Correct the parameter value and retry.

Number	141
Type	Error.
Text	SESSION is invalid, local variable `softspy_variable_operand` exists.
Description	A DEFINE command for a SoftSpy variable as SESSION has been processed for a variable name that has already been defined as LOCAL.
Response	Correct the variable name and retry.

Number	142
Type	Warning.
Text	No more errors.
Description	A FORWARD ERROR or BACKWARD ERROR command has been issued when no more errors exist.

Number	143
Type	Error.
Text	Mismatched parenthesis in expression for command `command`.
Description	An expression has been evaluated that contains mismatched parentheses.
Response	Correct the expression and retry.

Number	144
Type	Error.
Text	$CURRENT_LINE may only be set for the SOURCE window.
Description	A SET command for $CURRENT_LINE can only be issued when the active window is the SOURCE window.
Response	Correct the command syntax and retry.

Number	145
Type	Error.
Text	Subscripts may not contain subscripts.
Description	An operand containing a subscript has been specified as a subscript for an operand.
Response	Specify a valid subscript and retry.

Number	146
Type	Error.
Text	Invalid character found in parameter name.
Description	A parameter has been issued as part of an OPEN PRINTER command that contains a non-alphanumeric character.
Response	Correct the command and retry.

Number	147
Type	Error.
Text	{ `acl_identifier` \| `macro_identifier` } is in use, please save under another name.
Description	A SAVE command has been issued for a MACRO or ACL that is currently in use.
Response	Save the MACRO or ACL under another name.

Number	148
Type	Error.
Text	Operand `operand` cannot be specified for COLLECT.
Description	A COLLECT command has been issued for a compilation operand.
Response	Correct the command syntax and retry.

Number	149
Type	Error.
Text	Exclamation cannot be the last character in a pattern.
Description	The ! wildcard character must always be followed by another character.
Response	Correct the pattern syntax and retry.

Number	150
Type	Error.
Text	Title `title` must be between 1 and `max_len` characters in length.
Description	A title has been specified in a SHOW command that has a length greater than that specified, or 4 if none was specified.
Response	Adjust the length and retry.

Messages 151-175

Number	151
Type	Error.
Text	Duplicate label `label`.
Description	A duplicate label name has been found when a SAVE MACRO command has been specified.
Response	Adjust one of the label names and retry.

Number	152
Type	Error.
Text	`SoftSpy_function` cannot be set.
Description	A SET command has been issued for a SoftSpy function or SoftSpy variable whose value cannot be modified.
Response	Correct the command syntax and retry.

Number	153
Type	Error.
Text	Parameter missing.
Description	A command has been issued for a SoftSpy function with an incorrect number of parameters.
Response	Correct the command syntax and retry.

Number	154
Type	Error.
Text	Invalid `compilation_operand` requested.
Description	An invalid `compilation_operand` has been requested.
Response	For a detailed explanation of this topic, refer to the compilation operand section of SoftSpy operands. Correct the command syntax and retry.

Number	155
Type	Error.
Text	Invalid `quality_assurance_operand` requested.
Description	An invalid `quality_assurance_operand` has been requested.
Response	For a detailed explanation of this topic, refer to the quality assurance operand section of SoftSpy operands. Correct the command syntax and retry.

Number	156
Type	Informational.
Text	SoftSpy connection: user: `userid(usernum)` to server: `userid(usernum)`.
Description	The specified user has been connected to the specified SoftSpy server.

Number	157
Type	Error.
Text	CPU validation error: `cpu key`.
Description	The CPU id does not match that specified by the SoftSpy configuration details.
Response	Contact your SoftSpy administrator.
Administrator	Contact Technical Support for assistance.

Number	159
Type	Error.
Text	Before start date of key.
Description	The SoftSpy configuration includes a start date and the current system date is prior to that start date.
Response	Contact your SoftSpy administrator.
Administrator	SoftSpy configurations that include a start date are most commonly used when setting the system or Model 204 clock ahead for testing. Verify that the clock is set as intended. If it is, then contact Technical Support for assistance.

Number	160
Type	Error.
Text	SPY ON not permitted on a SoftSpy server thread.
Description	The M204 SPY ON command was issued from within a SoftSpy session.
Response	No response is required.

Number	161
Type	Error.
Text	Userid `userid` is not valid.
Description	The userid specified in the SPY ON USER command is an invalid Model 204 userid.
Response	Correct the command and retry.

Number	162
Type	Error.
Text	Userid `userid` is not unique.
Description	The userid specified on the SPY ON USER command is logged in multiple times.
Response	Use the SPY ON THREAD command specifying the thread number to be debugged.

Number	163
Type	Error.
Text	Userid `userid` does not exist.
Description	The userid specified on the SPY ON USER command is not currently logged in or is only logged in on the current thread.
Response	Either log in the user to be debugged or issue the SPY ON USER for another userid.

Number	164
Type	Error.
Text	User `usernum` is not a User Language thread.
Description	The thread specified on the SPY ON THREAD command or the user specified by the SPY ON USER command is not a User Language thread. SoftSpy can only be associated with a thread that is capable of running User Language programs.
Response	Correct the command, specifying another User Language thread, and retry.

Number	165
Type	Error.
Text	User number `usernum` is out of range.
Description	The thread specified on the SPY ON THREAD command is greater than the number of threads defined in the online.
Response	Correct the command and retry.

Number	166
Type	Error.
Text	User `usernum` is the current thread.
Description	The thread specified on the SPY ON THREAD command is the current thread. To run SoftSpy on the current thread use the SPY ON command with no arguments.
Response	Use the SPY ON command with no arguments.

Number	167
Type	Error.
Text	User number `usernum` is a SoftSpy server.
Description	The thread specified on the SPY ON THREAD command is running a SoftSpy server. You cannot use SoftSpy on a SoftSpy server.
Response	Correct the command and retry using another user number or userid.

Number	168
Type	Error.
Text	User `usernum` is already using SoftSpy.
Description	The thread specified on the SPY ON THREAD or the user specified on the SPY ON USER command is already associated with a SoftSpy session. A User Language session can only be associated with a single SoftSpy session.
Response	Correct the command and retry.

Number	169
Type	Error.
Text	SoftSpy not supported on TEPCO terminals (DBCS=3).
Description	SoftSpy does not support TEPCO terminals. SoftSpy requires a terminal that supports both single- and double-byte character sets.
Response	Use an IBM 5550 terminal when using SoftSpy.

Number	170
Type	Error.
Text	`usernum` must be numeric.
Description	The user number specified on the SPY ON THREAD command was not numeric.
Response	Correct the command and retry.

Number	171
Type	Error.
Text	Execution position is not immediately before IF, ELSEIF, REPEAT WHILE, computed JUMP TO.
Description	The UL RESULT command was attempted when the program execution position was not immediately before an IF, ELSEIF, REPEAT WHILE, or computed JUMP TO.
Response	Make the program execution position immediately before an IF, ELSEIF, REPEAT WHILE, or computed JUMP TO and retry. This can be done by executing the program until the execution position is at the appropriate point or using the UL JUMP TO command to immediately branch to that location.

Number	172
Type	Error.
Text	Execution position is not in a loop.
Description	The UL CONTINUE or UL LOOP END command was attempted while the program execution position was not in a loop.
Response	Put the program execution position within a FOR or REPEAT loop and retry. This can be done by executing the program until the execution position is at the appropriate point or using the UL JUMP TO command to immediately branch to that location.

Number	173
Type	Error.
Text	Execution position is not in a subroutine.
Description	The UL RETURN command was attempted when the execution position was not within a subroutine.
Response	Put the program execution position within a subroutine and retry. This can be done by executing the program until the execution position is at the appropriate point or using the UL JUMP TO command to immediately branch to that location.

Number	174
Type	Error.
Text	Line number is out of range.
Description	The UL JUMP TO LINE command was used to jump to a program line number greater than the number of lines in the program.
Response	Correct the command and retry.

Number	175
Type	Error.
Text	Line is not first line of executable statement.
Description	An attempt has been made to jump to a line which is not executable. Examples of lines which are not executable are continuation lines, comment lines, screen definition statements and other types of declare statements.
Response	Jump to the first line of an executable statement.

Messages 176-206

Number	176
Type	Error.
Text	Jumping into or out of subroutine is not allowed.
Description	An attempt was made to jump into or out of a subroutine. Jumping into or out of a subroutine is not allowed.
Response	Correct the jump-to location and retry or execute the program to a point where the jump would be valid.

Number	177
Type	Error.
Text	Jumping into or out of ON UNIT is not allowed.
Description	An attempt was made to jump into or out of an ON UNIT. Jumping into or out of an ON UNIT is not allowed.
Response	Correct the command and retry.

Number	178
Type	Error.
Text	Jumping into the body of a loop is not allowed.
Description	An attempt was made to jump into the body of a loop.
Response	Jump to a statement that is not within the body of a loop.

Number	179
Type	Error.
Text	Statement number or label was not found.
Description	The UL JUMP TO command was used to attempt to jump to a nonexistent statement number or statement label.
Response	Correct the command and retry.

Number	180
Type	Error.
Text	Jumping to current statement is not allowed.
Description	An attempt was made to jump to the current statement.
Response	Jump to a statement other than the current statement.

Number	181
Type	Error.
Text	More than one JUMP TO prefix command has been specified.
Description	More than one JUMP TO prefix command has been entered in the prefix area of the SoftSpy screen.
Response	Remove all but one of the JUMP TO prefix commands.

Number	182
Type	Error.
Text	No value specified for UL RESULT.
Description	The UL RESULT command is missing a required argument.
Response	Correct the command and retry.

Number	183
Type	Error.
Text	Command `command` is not valid in context `context`.
Description	The command entered is not valid in the reported context.
Response	Wait until the record lock has been released and retry.

Number	184
Type	Error.
Text	Field `fieldname` not found.
Description	A SET command has been issued with a field_name_operand that does not exist within the current file.
Response	Correct the command and retry.

Number	185
Type	Error.
Text	Record locking conflict setting `field_name`.
Description	A record locking conflict was encountered while attempting to use the SET command with a field_name_operand.
Response	Retry the command at a later time.

Number	186
Type	Error.
Text	No current record.
Description	An attempt was made to use the SET command with a field_name_operand when there was no current record.
Response	Execute the program to a point where there is a current record (that is, within a FOR EACH RECORD loop) and retry.

Number	187
Type	Error.
Text	Update privileges required for file `filename`.
Description	An attempt was made to use the SET command with a field_name_operand where the current record was not open with update access.
Response	Exit the program, open the file with update access, and rerun the program.

Number	188
Type	Error.
Text	Preallocated field length error.
Description	An attempt was made to use the SET command with a field_name_operand to change the value of a preallocated field where the new length was either longer than the defined length of the field or null.
Response	Correct the command and retry.

Number	189
Type	Error.
Text	Uniqueness violation, field `fieldname` is defined UNIQUE.
Description	An attempt was made to use the SET command with a field_name_operand to update a unique field, and that field already contains the specified value in another record in the file.
Response	Correct the command and retry.

Number	190
Type	Error.
Text	Field `fieldname` contains invalid Kanji data.
Description	An attempt was made to set a DBCS field to a value which contains invalid Kanji data.
Response	Correct the command and retry.

Number	191
Type	Error.
Text	At-most-one constraint violation for field `fieldname`.
Description	An attempt was made to use the SET command with a field_name_operand to add an occurrence of the field on a record where the field was defined as AT-MOST-ONE and one occurrence already exists.
Response	Correct the command and retry.

Number	192
Type	Error.
Text	Fields may not be set during update record operations.
Description	An attempt was made to set a field value during an UPDATE RECORD operation. Record level and field level updates cannot be mixed.
Response	Wait until the UPDATE RECORD operation has completed and retry.

Number	193
Type	Error.
Text	Fields in remote files may not be set.
Description	An attempt was made to use the SET command to update a field in a remote file. The SET command cannot be used to update fields in remote files.
Response	No response is required.

Number	194
Type	Error.
Text	Sort key field `fieldname` may not be set.
Description	An attempt was made to use the SET command to update a record’s sort key.
Response	No response is required.

Number	195
Type	Error.
Text	Invisible field `fieldname` may not be set.
Description	The SET command was used to attempt to change the value of an invisible field.
Response	No response is required.

Number	196
Type	Error.
Text	Subscript too high for pre-allocated field `fieldname`.
Description	The SET command was used to update a preallocated field and the subscript provided was greater than the number of occurrences defined for the field.
Response	Correct the command and retry.

Number	197
Type	Error.
Text	Invalid occurrence specified for field `fieldname`.
Description	An invalid occurrence number was specified. Fields can only have a single subscript.
Response	Correct the command and retry.

Number	198
Type	Error.
Text	You must be a system manager or user 0 to use this feature.
Description	An attempt was made to issue the SPY AUDIT ON or SPY AUDIT OFF command from a userid other than a system manager or user zero.
Response	Log on as a system manager and re-issue the command or issue the command from user zero.

Number	199
Type	Error.
Text	The audit feature is not authorized.
Description	The SPY AUDIT ON or SPY AUDIT OFF command was issued but the audit feature is not enabled.
Response	Contact your SoftSpy Administrator.
Administrator	Contact Technical Support for a valid authorization key.

Number	200
Type	Error.
Text	Invalid SPY AUDIT command, use ON or OFF.
Description	The SPY AUDIT command was issued with an argument other than ON or OFF. The only valid arguments for the SPY AUDIT command are ON and OFF.
Response	Correct the command and retry.

Number	205
Type	Error.
Text	SoftSpy may not be used on Model=6 terminals.
Description	SoftSpy cannot be used on a "Model 6" terminal (Model 6 terminals are a Sirius Mods extension). Any attempt to use SoftSpy with Model 6 support will be rejected.
Response	Change the terminal model to 2, 3, or 4, then re-issue the SPY ON command. For example: RESET MODEL 2 SPY ON

Number	206
Type	Error.
Text	SoftSpy may not be used if the Janus/TN3270 Debugger is on.
Description	If the Janus or TN3270 Debugger is turned on, any attempt to turn on SoftSpy will be rejected.
Response	Turn off the Janus or TN3270 Debugger, then re-issue the SPY ON command. For example: TN3270 DEBUG OFF SPY ON

@@ Line 3: / Line 3: @@
 This topic contains information on all messages issued by SoftSpy.
-===Terminal Message Format===
+===Terminal message format===
 Most SoftSpy messages are displayed on the user's terminal. A few are issued to the audit trail.
@@ Line 18: / Line 18: @@
 given in this topic. The messages are documented in numerical order. A gap in the numeric sequence indicates an unused message number.
-===Message Documentation Format===
+===Message documentation format===
 SoftSpy messages are documented in the following format:
-<table>
+<table class="thJustBold">
 <tr><th nowrap>Message Number</th> <td>The number of the SoftSpy message.</td></tr>
 <tr><th>Message Type</th> <td>The message type is either Bug, Error, Informational, or Warning.</td></tr>
 <tr><th>Message Text</th> <td>The text of the message as it appears on the user's terminal, except for generic terms, such as a keyword, for which SoftSpy substitutes the appropriate value.</td></tr>
 <tr><th>Description</th> <td>A description of the SoftSpy message. While some descriptions are easily understood, others are longer and more complex, identifying several distinct causes of the message.</td></tr>
 <tr><th>Response</th> <td>The required response, an indication to notify the SoftSpy Administrator, or an indication that no response is required.</td></tr>
 <tr><th>Administrator</th> <td>The required response, if any, for the SoftSpy Administrator.</td></tr>
 </table>
@@ Line 31: / Line 35: @@
 ==Messages==
 This topic lists the SoftSpy error messages and responses. A gap in the message number sequence indicates unused message numbers.
 ===Messages 1-25===
-<table class="message"><tr><th>Number</th> <td> 1</td></tr>
+<table class="message">
+<tr><th>Number</th> <td> 1</td></tr>
 <tr><th>Type</th> <td>Error</td></tr>
@@ Line 55: / Line 61: @@
 </table>
 ----
-<table class="message"><tr><th>Number</th> <td> 3</td></tr>
+<table class="message">
+<tr><th>Number</th> <td> 3</td></tr>
 <tr><th>Type</th> <td>Informational.</td></tr>
@@ Line 66: / Line 73: @@
 </table>
 ----
-<table class="message"><tr><th>Number</th> <td> 4</td></tr>
+<table class="message">
+<tr><th>Number</th> <td> 4</td></tr>
 <tr><th>Type</th> <td>Error.</td></tr>
@@ Line 78: / Line 86: @@
 ----
-<table class="message"><tr><th>Number</th> <td> 5</td></tr>
+<table class="message">
+<tr><th>Number</th> <td> 5</td></tr>
 <tr><th>Type</th> <td>Informational.</td></tr>
@@ Line 90: / Line 99: @@
 ----
-<table class="message"><tr><th>Number</th> <td> 6</td></tr>
+<table class="message">
+<tr><th>Number</th> <td> 6</td></tr>
 <tr><th>Type</th> <td>Error.</td></tr>
@@ Line 102: / Line 112: @@
 ----
-<table class="message"><tr><th>Number</th> <td> 7</td></tr>
+<table class="message">
+<tr><th>Number</th> <td> 7</td></tr>
 <tr><th>Type</th> <td>Error.</td></tr>