UL/SPF installation guide: Difference between revisions

From m204wiki
Jump to navigation Jump to search
Line 8: Line 8:
The following checklist specifies in brief the steps to follow installing
The following checklist specifies in brief the steps to follow installing
<var class="product">UL/SPF</var>, whether for MVS or CMS.
<var class="product">UL/SPF</var>, whether for MVS or CMS.
The sections [[#Installing UL/SPF under MVS|"Installing UL/SPF under MVS"]] and [[#Installing UL/SPF under CMS|"Installing UL/SPF under CMS"]]
The sections [[#Installing UL/SPF under CMS|"Installing UL/SPF under CMS"]] and [[#Installing UL/SPF under MVS|"Installing UL/SPF under MVS"]] describe these steps in greater detail for each operating system.
describe these steps in greater detail for each operating system.
<ol>
<ol>
<li>Install and link the <var class="product">Sirius Mods</var> as described in the <i>Sirius
<li>Install and link the <var class="product">Sirius Mods</var> as described in the <i>Sirius
Line 21: Line 20:
In addition, there may be any number of other datasets required for
In addition, there may be any number of other datasets required for
the <var class="product">UL/SPF</var> components you are installing.
the <var class="product">UL/SPF</var> components you are installing.
These are listed in [[#Installation checklist (MVS)|"Installation checklist (MVS)"]]
These are listed in [[#Installation checklist (CMS)|"Installation checklist (CMS)"]] and [[#Installation checklist (MVS)|"Installation checklist (MVS)"]]. </p>
and [[#Installation checklist (CMS)|"Installation checklist (CMS)"]]. </p>
   
   
<li>Update the Online JCL or EXEC:
<li>Update the Online JCL or EXEC:
<ul>
<ul>
<li>Add the DD cards or FILEDEFs for the SIRxxxxx and/or JANxxx files.
<li>Add the DD cards or FILEDEFs for the SIR<i>xxxxx</i> and/or JAN<i>xxx</i> files.
   
   
<li>Verify that the <var>SYSOPT</var> parameter has the 1 and 2 bits set.
<li>Verify that the <var>SYSOPT</var> parameter has the 1 and 2 bits set.
Line 33: Line 31:
<li>Update CCAIN parameters:
<li>Update CCAIN parameters:
<ul>
<ul>
<li>Increase <var>NFILES</var>, <var>NDCBS</var>, and <var>NDIR</var> for the SIRxxxxx and/or JANxxx files.
<li>Increase <var>NFILES</var>, <var>NDCBS</var>, and <var>NDIR</var> for the SIR<i>xxxxx</i> and/or JAN<i>xxx</i> files.
   
   
<li>Verify that <var>NORQS</var> is at least 5.
<li>Verify that <var>NORQS</var> is at least 5.


<li>Verify the online has at least 10 SDAEMON threads (typically defined as IODEV15s).
<li>Verify the online has at least 10 [[Sdaemons|SDAEMON]] threads (typically defined as IODEV15s).
</ul>
</ul>
   
   

Revision as of 00:21, 15 January 2013

UL/SPF (the User Language System Productivity Facility) is a set of APSY subsystems running inside a Model 204 Online that provide full-screen and web-based tools to aid programmers, DBAs, and system managers to handle the complexities of User Language and file and system management.

Installing UL/SPF requires downloading the SIRIUS file and restoring it to your environment, setting up some subsidiary Model 204 files, and verifying that the environment has the appropriate parameter settings.

Upgrades to UL/SPF can almost always be handled by restoring a fresh copy of the SIRIUS file.

A summary of the UL/SPF installation steps

The following checklist specifies in brief the steps to follow installing UL/SPF, whether for MVS or CMS. The sections "Installing UL/SPF under CMS" and "Installing UL/SPF under MVS" describe these steps in greater detail for each operating system.

  1. Install and link the Sirius Mods as described in the Sirius Mods Installation Guide. UL/SPF requires a matching or greater version number of the Sirius Mods.
  2. Allocate the space required for the SIRIUS dataset, and RESTORE it from tape, where they are stored in DUMP format, or from the DUMP files found on the website.

    In addition, there may be any number of other datasets required for the UL/SPF components you are installing. These are listed in "Installation checklist (CMS)" and "Installation checklist (MVS)".

  3. Update the Online JCL or EXEC:
    • Add the DD cards or FILEDEFs for the SIRxxxxx and/or JANxxx files.
    • Verify that the SYSOPT parameter has the 1 and 2 bits set.
  4. Update CCAIN parameters:
    • Increase NFILES, NDCBS, and NDIR for the SIRxxxxx and/or JANxxx files.
    • Verify that NORQS is at least 5.
    • Verify the online has at least 10 SDAEMON threads (typically defined as IODEV15s).
  5. Start the Online, using an ONLINE load module that contains the Sirius Mods.
  6. Open file SIRIUS and execute the following command:

    INCLUDE SETUP.EXE

    Follow the instructions on the installation screen (and in the Help text for the screen).

  7. Add users to the appropriate SCLASSs for the Sirius APSYs.
  8. Verify success of the installation by compiling each Sirius APSY.
  9. Read "UL/SPF server size and additional customization" to determine if additional APSY-specific customizations are required at your site.
  10. Use the SIRADMIN APSY to customize the UL/SPF environment.

Preparing for UL/SPF installation

The UL/SPF products are implemented as Model 204 subsystems. The code for all the component subsystems resides in a file called SIRIUS which is typically downloaded from the product section of the website.

Obtaining product installation files

The files necessary for the installation are available either from distribution tapes or from the Sirius web site. Downloading and installing from the web site is generally easier, as you don't have to wait for tapes to arrive and be cataloged onto your system.

To download product files from the Sirius web site:

  1. On the Sirius home page, click the "Support" link in the "Sirius Home" list in the yellow navigation frame.
  2. In the "Customer Service" section, click the "Download User Language files" link. This brings you to a Customer Maintenance page that contains a list of Sirius Software User Language dump files. A link on this page provides Help on downloading format, some information about different browser behaviors, file sizing information, and more.

Re-Installing UL/SPF typically involves nothing more than downloading and restoring a new version of the SIRIUS file.

Determining eligible products

To download files or maintenance from the Sirius web site, you must have a user ID provided by Sirius (contact Technical Support if you need an ID). The web site will show only products for which your organization is up to date on maintenance or rental payments. If a product does not appear on your download page and you believe it should, contact Technical Support.

If you are working from a distribution tape, files for products not purchased by your organization will be present but empty on the installation tape.

Any step of the installation process may be bypassed if it applies only to a UL/SPF module you are not installing.

System requirements

  • UL/SPF operates in a Model 204 online region, and Sirius supports all releases of Model 204 that are supported by Rocket / Computer Corporation of America. In the rest of this document, "Online" refers to a region of Model 204 running an ONLINE load module containing the Sirius Mods.
  • Requirements for server sizes and parameter settings for each product are listed in "UL/SPF server size and additional customization".
  • Sirius Mods custom methods and $functions must be activated. The UL/SPF products make extensive use of custom $functions that are part of the Sirius Mods. Before continuing with installation, follow the instructions in the Sirius Mods Installation Guide to make the $functions active in the target Online. To test that the Sirius Mods is installed and linked, type SIRIUS at the Model 204 command line to display the status of the Sirius Mods. An error results if the Sirius Mods is not linked into the Online.

User privileges

The installing user must have:

  • Update access to the JCL or EXECs that bring up the host Online.
  • The installing user must have System Manager privileges, as well as access to SUBSYSMGMT and the JCL or EXEC that runs the Online Model 204 region.

Full Install or Quick Install

  • Sites that have never installed UL/SPF must use the full installation, as there are a number of files to allocate and Model 204 parameters to update.
  • Sites that are re-installing the latest version of UL/SPF may use the quick-install or the full installation (some of whose steps would already be complete, such as the allocation and initialization of SIRLOCAL).
  • If you are upgrading from a previous version or maintenance level, your site already has a SIRLOCAL file, which holds users' profiles and other local customizations. Your existing SIRLOCAL should be left intact and allocated to the Online, as the installation process uses SIRLOCAL information to determine which features should be upgraded.

A "Quick Install" for existing UL/SPF sites

If your site hosts a version of UL/SPF earlier than 6.8, you cannot use this "Quick Install guide.

You can verify the ULSPF version either in the title of any UL/SPF help screen, or by looking at the content of the VERSION procedure in the SIRIUS file.

Here are the Quick Install steps:

  1. From the "User Language dump files" page in the Support section of the Sirius website, download the latest version of the SIRIUS file (which is labeled "All UL/SPF products in one file").
  2. Verify that the online in which you are installing contains a version of the Sirius Mods at equal to or greater than the UL/SPF version.
  3. Restore the SIRIUS file into a 4200-page file on your mainframe. The DDNAME for this file in your Model 204 regions is SIRIUS. If you're upgrading from a previous release, simply overlay your old SIRIUS file.
  4. If your site uses the web version of SirMon, there is a change between Version 7.7 and 8.1 to the file that holds historical performance information. You should delete from the SirMon APSY definition the file MONDATA, and add the file SIRSTATS, allocated with at least 5000 pages. In file SIRIUS, run the procedure CREATE.SIRSTATS to define the fields in this file.

The UL/SPF APSYs can be set to AUTOSTART if you like. SirScan, SirMon and SirLib have SCLASS-sensitive code, so SCLASSes should not be renamed or redefined for these systems.

Use the APSY utility SIRADMIN to customize UL/SPF settings.

Installing UL/SPF under CMS

This page gives instructions for installing UL/SPF under CMS, including general system and software requirements. It assumes you have reviewed Preparing for UL/SPF installation for details on UL/SPF system requirements.

The SIRIUS Model 204 file, which contains the User Language code that runs UL/SPF, can be obtained from the Support section of the website or from a Sirius distribution tape. If working from a tape, it is shipped with a single tape file in VMFPLC2 DUMP format which includes these files:

File name Contents
various Files required for the installation of Sirius Mods. See the Sirius Mods Installation Guide for more details.
ULSPF DUMPSIRI A Model 204 DUMP of the SIRIUS file that is required for the all subsystems.
ULSPF DUMPFIX A Model 204 DUMP of the SIRFIXES file, (the use of which is now deprecated).

Installation steps:

  1. Install the Sirius Mods.

    UL/SPF requires a matching or greater version number of the Sirius Mods. For information about installing the Sirius Mods, see the Sirius Mods Installation Guide.

  2. Allocate space for the Sirius, and restore it from the distribution tape or from the dump files downloaded off the Sirius website.
    1. Define and format a minidisk to hold the UL/SPF installation files. 3400 4096 byte CMS blocks should be sufficient in all cases. This requires a 44 cylinder CMS minidisk on a 3390.
    2. Attach a tape drive at virtual address 181 to the owner of the installation minidisk defined in step 1. Mount the Sirius distribution tape on this tape drive.
    3. Load the files appropriate to your site with the VMFPLC2 LOAD command. This can be done most simply with the following sequence of commands:

      TAPE REW VMFPLC2 LOAD (EOT

    4. Allocate space for the required Model 204 datasets. A skeleton exec, ULSPFAL, is provided for this purpose. Modify this exec to perform the allocations on the appropriate minidisks. Allocate space for the following data sets :
      SIRIUS 4200 pages (must always be allocated.
      SIRLOCAL 1200 pages, must always be allocated.
      SIRSTATS or MONDATA 60000 pages, only if you are installing SirMon. Use MONDATA for versions 7.7 and earlier. Use SIRSTATS for versions 8.1 and later.
      SIRFILED 1200 pages, only if you are installing SirFile.
      SIRLIBD 1200 pages, only if you are installing SirLib.
      SIRLIBP 1200 pages, only if you are installing SirLib.
      SIRTPROC 2000 pages, only if you are installing SirLib.

      This file can and should be sized much larger if you maintain hundreds or thousands of concurrent change decks in SirLib.

      JANCAT 1200 pages, only if you are installing Janus OMNI.
      JANSSL 1200 pages, only if you are installing Janus SSL.

      IMPORTANT:
      If you are upgrading from a previous release, keep your old copy of SIRLOCAL and any application-specific data files, like JANCAT, SIRLIBD, SIRFILED or SIRSTATS. The installation process uses these files to determine whether to perform upgrade actions or new-installation actions.

    5. Restore the SIRIUS file with the LOADPROC exec.

      To restore, customize the FILEDEF inside the LOADPROC exec to conform to local standards. In addition, modify LOADPROC CCAIN to contain a valid login ID and password. If, for example, you are using the SIRIUS file for the first time, make sure it is created, opened, and initialized before the RESTORE.

      To run the LOADPROC exec, make sure the Online execs and load modules are on an accessed disk, then type the command:

      ONLINE LOADPROC

  3. Complete steps 3 through the end in "Installing UL/SPF under MVS," below.

Installing UL/SPF under MVS

This section gives instructions for installing UL/SPF under MVS, including the general system and software requirements. If you received your product on tape, the following instructions apply. If like most sites, you download products and updates from the Sirius website, see the instructions in A "Quick Install" for existing UL/SPF sites.

Note: The Sirius installation tape for MVS has an internal label of SIRIUS, and it contains UL/SPF files in an IEBCOPY unloaded PDS on file 3 of the tape. Before continuing, unless you have downloaded the product files from the website, you must load to disk the unloaded PDS before you can RESTORE the individual members to Model 204 files.

The following JCL will load the UL/SPF files to disk:

//LOADSIR JOB 0,CLASS=A,MSGCLASS=X,NOTIFY=ME //* //* Load Sirius products from tape //* //LIB EXEC PGM=IEBCOPY,REGION=0M //T1 DD UNIT=TAPE,LABEL=(1,SL),DSN=SIRIUS.LIB, // DISP=(OLD,PASS),VOL=SER=SIRIUS //T2 DD UNIT=TAPE,LABEL=(2,SL),DSN=SIRIUS.LOAD, // DISP=(OLD,PASS),VOL=SER=SIRIUS //T3 DD UNIT=TAPE,LABEL=(3,SL),DSN=SIRIUS.ULSPF, // DISP=(OLD,PASS),VOL=SER=SIRIUS //* //D1 DD DISP=(,CATLG),SPACE=(CYL,(10,0,5), // DSN=SIRIUS.LIB,UNIT=SYSDA //D2 DD DISP=(,CATLG),SPACE=(CYL,(5,0,2), // DSN=SIRIUS.LOAD,UNIT=SYSDA //D3 DD DISP=(,CATLG),SPACE=(CYL,(44,0,2), // DSN=SIRIUS.ULSPF,UNIT=SYSDA //SYSPRINT DD SYSOUT=* //SYSIN DD * COPY INDD=T1,OUTDD=D1 COPY INDD=T2,OUTDD=D2 COPY INDD=T3,OUTDD=D3 /*

The JCL includes references to these files:

File Num / Name Contents
1 / SIRIUS.LIB File required for the installation of Sirius Mods. See the Sirius Mods Installation Guide for more details.
3 / SIRIUS.ULSPF(DUMPSIRI) A Model 204 DUMP of the SIRIUS file that is required for all the subsystems.
3 / SIRIUS.ULSPF(DUMPFIX) A Model 204 DUMP of the SIRFIXES file. This file is deprecated and not necessary for this installation.

Installation checklist (MVS)

  1. Install the Sirius Mods. Refer to the Sirius Mods Installation Guide for details.

    Note: The Online in which UL/SPF will run must point to a load module containing the Sirius Mods. Also, as of version 6.8, UL/SPF releases require a matching or greater version number of the Sirius Mods.

  2. Allocate the space required for the Sirius files. Note that the SIRIUS file has X'0221' privileges, which does not allow RESTORE. If you are creating a new SIRIUS file from scratch, this will not be a problem. But if you are restoring into your existing SIRIUS file, you will have to CREATE the file first (to wipe out existing content) before you execute the RESTORE. The command sequence would be something like:

    CREATE FILE SIRIUS END CREATE OPEN FILE SIRIUS IN SIRIUS RESTORE 192 FROM <whatever>

    SIRIUS 4200 pages; must always be allocated.
    SIRLOCAL 1200 pages; must always be allocated.
    SIRSTATS or MONDATA 4000 pages; only if you are installing SirMon. Use MONDATA for versions 7.7 and earlier. Use SIRSTATS for versions 8.1 and later.
    SIRFILED 1200 pages; only if you are installing SirFile.
    SIRLIBD 1200 pages; only if you are installing SirLib.
    SIRLIBP 1200 pages; only if you are installing SirLib.
    SIRTPROC 2000 pages; only if you are installing SirLib. This file can and should be sized much larger if you maintain hundreds or thousands of concurrent change decks in SirLib.
    JANCAT 1200 pages; only if you are installing Janus OMNI.
    JANSSL 1200 pages; only if you are installing Janus SSL.

    IMPORTANT:
    If you are upgrading from a previous release, keep your old copies of SIRLOCAL and any application-specific data files, like JANCAT, SIRLIBD, SIRFILED, or SIRSTATS. The installation process uses these files to determine whether to perform upgrade actions or new-installation actions.

    Restore SIRIUS, noting the following:

    • Modify LOADPROC in the JCL library created during the $functions installation (usually SIRIUS.Vxxx.LIB, where xxx is a version number) to refer to an appropriate load module and CCAxxxxx files. Note that LOADPROC may have been customized for your site to include only those files relevant to your installation process.
    • Rename database DSNs to conform to local standards.
    • Provide a valid logon ID and password for the CCAIN stream for this job. If, for example, you are using the SIRIUS file for the first time, make sure it is created, opened, and initialized before the RESTORE.
  3. Update the Online JCL or EXEC:
    1. Add DD (MVS) cards or FILEDEFs (CMS) for the Sirius files. The following list identifies the files for which DD cards or FILEDEFs may be needed:
      SIRIUS must always be allocated
      SIRLOCAL must always be allocated
      SIRSTATS or MONDATA if installing SirMon and using the web interface. Use MONDATA for UL/SPF versions 7.7 and prior. Use SIRSTATS for UL/SPF versions 8.1 and later.
      SIRFILED if installing SirFile
      SIRLIBD, SIRLIBP, SIRTPROC if installing SirLib
      JANCAT if installing JANUS OMNI Access Module
      JANSSL if installing JANUS SSL Module
    2. Verify that the Online environment allows the use of file groups and APSY subsystems.
      • To use permanent file groups, the Online must have allocated an initialized CCAGRP file, and the SYSOPT parameter must contain the 2 bit.
      • To use APSYs, an Online must have allocated an initialized CCASYS file (with all fields defined), and the SYSOPT parameter must contain the 1 bit.
      For more information about APSYs and file groups, see the Rocket Model 204 System Manager's Guide.
  4. Verify the online has a minimum of 10 Sdaemon threads allocated. These threads are typically defined as IODEV15s.
  5. Modify the User 0 stream. Adjust these parameters:
    NFILES Increase by the number of UL/SPF files.
    NDCBS Increase by the number of UL/SPF files.
    NDIR Increase by the number of UL/SPF files.
    NORQS Verify setting is at least 5.
  6. Start the Model 204 Online region, verifying that it points to a load module containing the Sirius Mods.
  7. Issue OPEN FILE SIRIUS (no password is required), and execute the following command:

    INCLUDE SETUP.EXE

    This procedure performs all installation functions for new users, and all upgrade functions for reinstalling users. No user profiles or other site-specific customization will be lost. If any problems are encountered while running this procedure, correct the problem and re-execute.

    The procedure SETUP.EXE also builds an APSY subsystem called SETUP.EXE. If installations need to be re-run, the subsystem may be invoked rather than the procedure.

    During APSY execution, some error messages are not suppressed to aid in diagnosing any installation problems. For example, you will be able to see if an installation failed because a file was enqueued in a different Online, etc.

  8. Add users to the appropriate SCLASSes for any private or semi-public Sirius APSYs. The installing user is automatically added to the administration SCLASS in all Sirius APSYs.
  9. Verify the installation of the subsystem(s) by compiling all of the subsystems.
    Enter ... To test the ...
    SIRSCAN START Journal scanner
    SIRFILE START File Monitoring subsystem
    SIRPRO START Developers' Environment
    SIRMON START Online performance monitor
    SIRLIB START Change Management system
    JANCAT START Janus OMNI Table manager
    JANSSL START Janus SSL certificate management system

    If any of these subsystems fails to compile, ensure that the subsystem is STOPped, and run it under TEST DEBUG mode. For example, to determine why SIRSCAN failed to compile, enter:

    TEST DEBUG SIRSCAN

  10. This step is optional. Modify the online input stream so User 0 initializes (compiles) the UL/SPF subsystems. Do this by placing one or more of the following in User 0's input stream:

    SIRSCAN START SIRFILE START SIRPRO START SIRMON START SIRLIB START JANMAN START JANCAT START START SUBSYSTEM ULSPF

    This ensures that the subsystems are started for non-administrative users, and it shifts the overhead of compilation to a non-peak computing period.

  11. Review "UL/SPF server size and additional customization" for specific requirements of individual APSY components of UL/SPF.

Note: CCATEMP usage may increase with UL/SPF. CCATEMP should be monitored (VIEW TEMPSIZE, VIEW TEMPMAX) to ensure that sufficient space is allocated to accommodate the additional activity.

UL/SPF server size and additional customization

The minimum UL/SPF server size requirements are listed below. The actual server size requirements may vary slightly, because of table settings in the local Online Model 204 regions, and because of slight differences between UTABLE requirements in different versions of Model 204.

Subsystem name Minimum server
SIRSCAN 180K
SIRDBA 180K
SIRFILE 230K
SIRPRO 220K
SIRLIB 135K
SIRADMIN 150K
SIRMON 120K
ULSPF 135K

UTABLE settings

As of UL/SPF version 8.1 (June 2013), all UL/SPF subsystems can be set to bypass UTABLE resets. Use the SIRADMIN subsystem to set this feature. For versions prior to 8.1, and for those who choose to leave the UTABLE resets in place, UL/SPF will capture local UTABLE settings before they reset them to those required by UL/SPF.

Initial problems with UL/SPF subsystems are usually associated with one or two extremely small default UTABLE settings. Running the failing apsy in TEST DEBUG mode will highlight UTABLE parameters that need to be increased.

Additional setup for SirLib

Read and follow the instructions in the appendix "Getting Started" in the SirLib User's Guide.

Additional setup for SirScan

The SirScan administrator may use SIRADMIN option 4 to set default I/O and record maximums for users in the various SirScan SCLASSes. This is described at the beginning of the SirScan User's Guide.

Additional setup for SirMon

When users are added to SCLASSes, note that there is a special BUMP SCLASS. Any user added to this SCLASS gains the ability to BUMP other users. This class does not provide access to customizing options in SirMon. Only users in the ADMIN SCLASS are able to add custom screen definitions to SirMon.

If the SirMon background monitor is to be used, add the following line to User 0's input stream:

SIRMON BACKGROUND

The Background monitor may also be started automatically in a BATCH2 thread or an sdaemon thread. Consult the SirMon User's Guide for details.

You can customize statistic thresholds or use the Sirius-supplied defaults to establish problem conditions.

As of UL/SPF Version 6.8, SirMon has a feature to send warnings to e-mail addresses and cell phones (via e-mail). This feature requires Janus Sockets and a started Janus Sockets port.

Additional setup for SirFile

If the SirFile background monitor is to be used, add the following line to User 0's input stream:

SIRFILE BACKGROUND

As with SirMon, the Background monitor may be started automatically in a BATCH2 thread or in an sdaemon thread, and you can consult the SirFile User's Guide for details.

You can customize the system and file-specific thresholds or use the Sirius-supplied defaults to establish problem conditions.

UL/SPF access privileges and SCLASSes

Each component application of UL/SPF has its own APSY definition and privileges associated with SCLASSes. If you have a good reason for doing so, you can redefine any of the UL/SPF APSYs as PUBLIC, SEMI-PUBLIC, or PRIVATE. Consult Sirius Software if you are unsure of the effect of a proposed change.

UL/SPF on the Web

Web-specific versions of the UL/SPF subsystems are actively being developed and supported, and they are available to sites that own Janus Web Server.

All the UL/SPF APSYs can be used on the web via Janus Web Legacy Support, which simply translates the 3270 screens of the underlying product into HTML. Web-specific versions of both SirScan and SirMon can be invoked by setting up some Janus Web Server web rules.

Setup for web-based SirScan

Web-based SirScan is very lightweight, and requires a minimum of web rules to run.

  1. Define a Janus Web Server port.
  2. Define the following rule to invoke SirScan:

    JANUS WEB portname ON /SIRSCAN/* CMD 'SIRSCAN *'

  3. The above rule will make SirScan available, but it will not necessarily require a logon to the system, so you will need to add rules to force users to log in as well:

    JANUS WEB portname DISALLOW /SIRSCAN/* JANUS WEB portname ALLOW /SIRSCAN/* USER *

  4. Because the above rules force users to login, the port on which SirScan runs should either:
    • Be only on a company intranet.
    • Be SSL protected, to prevent userids and passwords from being sent over the internet in clear text format.

    The above rules will work on an unprotected port, but it is very strongly recommended that this feature only be used when SSL protection is in effect.

Setup for web-based SirMon

This applies only to UL/SPF Version 8.1 and later.

Because web-based SirMon employs XML, XSLT, Javascript, a stylesheet and some graphics, the web rules needed to run SirMon on the web are a little more complex.

  1. Define a Janus Web Server port.
  2. Define the following rules to invoke SirMon:

    JANUS WEB portname TYPE ANY *.PNG IMAGE/PNG JANUS WEB portname TYPE ANY *.CSS TEXT/CSS JANUS WEB portname TYPE ANY *.JS APPLICATION/X-JAVASCRIPT JANUS WEB portname ON /*.CSS OPEN SIRIUS SEND *.CSS JANUS WEB portname ON /SIRMON/* CMD SIRMON JANUS WEB portname ON /SIRMON/*.GIF OPEN SIRIUS SEND *.GIF EXPIRE +2147483 JANUS WEB portname ON /SIRMON/*.PNG OPEN SIRIUS SEND *.PNG EXPIRE +2147483 JANUS WEB portname ON /SIRMON/*.JS OPEN SIRIUS SEND *.JS BINARY EXPIRE +2147483 JANUS WEB portname ON /AJAX/* OPEN SIRIUS SEND * JANUS WEB portname ON /AJAX/*.JS OPEN SIRIUS SEND *.JS TEXT JANUS WEB portname ON /AJAX/*.UL OPEN SIRIUS CMD 'INCLUDE *.UL' JANUS WEB portname DISALLOW /SIRMON/* JANUS WEB portname ALLOW /SIRMON/* USER * JANUS WEB portname TYPE ANY *.XML TEXT/XML JANUS WEB portname TYPE ANY *.XSL TEXT/XSL JANUS WEB portname ON /SIRMON/*.XSL OPEN SIRIUS SEND *.XSL EXPIRE +2147483 JANUS WEB portname ON /SIRMON/*.CSS OPEN SIRIUS SEND *.CSS EXPIRE +2147483 JANUS WEB portname ON /SIRMON/TEXTJS/*.JS OPEN SIRIUS SEND *.JS TEXT EXPIRE +2147483 JANUS WEB portname ON /SIRMON/BUILDJS/*.JS CMD SIRMON OPEN SIRSTATS IN SIRSTATS INITIALIZE KEEPDEFS

  3. The above rules will make SirMon available, but they will not necessarily require a logon to the system, so you will need to add rules to force users to log in as well:

    JANUS WEB portname DISALLOW /SIRMON/* JANUS WEB portname ALLOW /SIRMON/* USER *

  4. Because the above rules force users to login, the port on which SirMon runs should either:
    • Be only on a company intranet.
    • Be SSL protected, to prevent userids and passwords from being sent over the internet in clear text format.

    The above rules will work on an unprotected port, but it is very strongly recommended that this feature only be used when SSL protection is in effect.

    Note: Using SirMon on the web also requires the SIRSTATS file. As shown in the above web rules, SIRSTATS can be re-initialized each time the Online comes up. SIRSTATS contains historical snapshots of system performance, and the file will fill up if not archived or re-initialized on occasion.