Category:Fast/Unload messages
Jump to navigation
Jump to search
This page contains links to the messages that apply to Fast/Unload, starting with version 3.1.
PDF of category pages
You can use this link to create a PDF file that contains all the pages in this category. If this category contains a "Subcategories" section, the PDF will also contain a linked list of the pages that belong to each subcategory listed in the "Subcategories" section.
Note: The resulting PDF is not optimized for online use. All blue links except for those in the table of contents (TOC) take you outside of the PDF (typically to http://m204wiki.rocketsoftware.com), so you must rely on the PDF bookmarks and TOC for online navigation. Hovering your mouse over a link will reveal its destination.
Pages in category "Fast/Unload messages"
The following 200 pages are in this category, out of 213 total.
(previous page) (next page)F
- Fast/Unload messages
- FUNL0002 Invalid parameter specification '(parm)'.
- FUNL0003 GETMAIN request failed, RC=(n). Run terminated.
- FUNL0004 End of Fast/Unload (abend info)
- FUNL0005 Unable to open input data set (FUNIN).
- FUNL0007 First statement not OPEN, compile not performed.
- FUNL0008 Invalid OPEN DDNAME '(ddname)', compile not performed.
- FUNL0009 Unable to open '(ddname)', compile not performed.
- FUNL0010 Unmatched quotes in input data.
- FUNL0011 Logical input record is too long.
- FUNL0012 Start of compile
- FUNL0013 End of compile. Number of errors = (n)
- FUNL0014 Invalid device type for (ddname), compile not performed.
- FUNL0015 No extents defined for (ddname).
- FUNL0016 DDNAME '(ddname)' not found.
- FUNL0017 I/O error on (ddname).
- FUNL0018 DDNAME '(ddname)' does not match internal name (intname)
- FUNL0019 Invalid version for (ddname).
- FUNL0020 (ddname) already enqueued exclusive by (jobname stepname).
- FUNL0021 No room in file enqueueing table for (ddname).
- FUNL0022 Error writing FPL page for (ddname).
- FUNL0023 Error dequeueing (ddname), file might be broken.
- FUNL0024 No multi-track reads allowed on (ddname). SBBUFF and SEBUFF must be 1.
- FUNL0025 Tracks per cylinder not divisible by (n).
- FUNL0026 (parm) is too large.
- FUNL0027 Truncated file - (ddname).
- FUNL0028
- FUNL0029
- FUNL0030 Premature end of program.
- FUNL0031 Invalid statement.
- FUNL0032 Program too large to run.
- FUNL0033
- FUNL0034 Extra code at end of statement is invalid.
- FUNL0035 Too many nesting levels.
- FUNL0036 Invalid syntax for (stype) statement.
- FUNL0037 END (token1) expected but (token2) (token3) was found.
- FUNL0038 Invalid PUT format specification.
- FUNL0039 Unable to convert constant to output format.
- FUNL0040 Output statements invalid with UAI.
- FUNL0041 UNLOAD statement only valid with UAI.
- FUNL0042 I/O error for (ddname), Table (t) Page (p)(-lastpg), at cylinder (cyl) track (trk).
- FUNL0043 Unable to load (loadmod).
- FUNL0044
- FUNL0045 Loop control variable already in use.
- FUNL0046 Unable to open '(ddname)'.
- FUNL0047 Too many buffers for '(ddname)'.
- FUNL0048 Invalid format for '(ddname)' ((reason)).
- FUNL0049 Record (recno) unexpectedly missing.
- FUNL0050 Record (recno) unexpectedly missing extension.
- FUNL0051 PUT (errtype) on line (lineno) for record (recno) in file (filename), output record (outrec).
- FUNL0052 Cancelling run because of PUT condition.
- FUNL0053 (operation) started.
- FUNL0054 (n) input records processed.
- FUNL0055 (steptype) statistics:
- FUNL0056 Unknown field in record (recno) ((hexDiag)).
- FUNL0057 Cancelling run because of (reason).
- FUNL0058 (n) output records created.
- FUNL0059 Mixed page sizes in (ddname).
- FUNL0060 Unsupported parameter '(parm)'.
- FUNL0061 Error reading input data set (FUNIN)
- FUNL0062 No (statement1) associated with (statement2) statement.
- FUNL0063 Can't have (statement2) after (statement1) clause.
- FUNL0064 Fast/Unload Version (vnum) at (site) on (MM/DD/YYYY time) (job ID) CPU (CPU ID).
- FUNL0065 Parameter settings:
- FUNL0066 Unmatched parentheses in (statement) statement.
- FUNL0067 Statement too complex.
- FUNL0068 Unmatched quotes in (statement) statement.
- FUNL0069 Error linking to (name).
- FUNL0070 SORT terminated prematurely.
- FUNL0071 Invalid SORT RECORD statement.
- FUNL0072 Multiple SORT (statement) statements.
- FUNL0073 SORT FIELDS statement replaced by -
- FUNL0074 Unable to resolve (fieldname) in SORT FIELDS statement.
- FUNL0075 SORT (statement) statement missing.
- FUNL0076 Invalid data in coded field dictionary.
- FUNL0077 Cancelling run because of CANCEL statement.
- FUNL0078 Unable to format (type) value.
- FUNL0079 Open DD (ddname) does not match found set DD (ddname).
- FUNL0080 Online run terminated at Online region request.
- FUNL0081 List output error.
- FUNL0082 Online run terminated because of intercepted program check.
- FUNL0084 Unable to initialize SORT task.
- FUNL0085 MAXREC out of range.
- FUNL0086 BSIZE required for UAI HASH.
- FUNL0087 Can't mix SORT statement and UAI.
- FUNL0088 Cancelling run because of attempt to (action) record (recnum) twice.
- FUNL0089
- FUNL0090 Index unload started.
- FUNL0091 Terminated because of
- FUNL0092 Unloading index data for (fieldname.).
- FUNL0093 Cancelling run because of OUTPUT error in record (recnum).
- FUNL0094 Group (groupname) does not match found set group name (groupname).
- FUNL0095
- FUNL0096 UAI SORT or HASH not allowed in group context.
- FUNL0097 (database) is internally inconsistent.
- FUNL0098 (product) has expired.
- FUNL0099 (product) not authorized for CPU (CPUID).
- FUNL0101 Invisible field invalid in UAI SORT: (fieldname)
- FUNL0102 Unknown or invalid (item): (phrase)
- FUNL0103 Invalid expression: (phrase)
- FUNL0104 Call Sirius Software for a new authorization.
- FUNL0105 Type error loading function package (module) from (DDname).
- FUNL0106 Unexpected return from function package (module) in (DDname): (info); Fast/Unload cancelled.
- FUNL0107 Invalid (symptom) to service routine: (value); Fast/Unload cancelled.
- FUNL0108 Too many arguments: (arg).
- FUNL0109 Attempt to extract (type) value from argument (arg number) - (cause); Fast/Unload cancelled.
- FUNL0110 Attempt to assign value to argument (arg number) - (cause); Fast/Unload cancelled.
- FUNL0111 (customer function message)
- FUNL0112 Invalid argument number (arg number): it must be (requirement).
- FUNL0113 Bad page trailer for (ddname), Table (t) Page (p), at cylinder (n1) track (n2): (Xtrlr DD) (Xtrlr tpg).
- FUNL0114 (update error) in field (fieldname).
- FUNL0115 Error converting entity to number in line (linenum).
- FUNL0116 Value is non-numeric or is out of range in line (linenum); Fast/Unload cancelled.
- FUNL0117 Duplicate field name.
- FUNL0118 Field dictionary full.
- FUNL0119 Error performing arithmetic in line (linenum): (intcode) opcode (op).
- FUNL0120 Unexpected END statement.
- FUNL0121 String truncated in line (linenum); Fast/Unload cancelled.
- FUNL0122 Invalid datetime or datetime format in line (linenum); Fast/Unload cancelled.
- FUNL0123 Invalid argument in line (linenum) ((designation)); Fast/Unload cancelled.
- FUNL0124 Feature not installed.
- FUNL0125 File (filename): (n) date fields detected.
- FUNL0126 Fast/Unload cancelled by customer-written function.
- FUNL0127 Fast/Unload cancelled unloading input record number (recno) in file (filename).
- FUNL0128 (N) argument positions passed to function; values:
- FUNL0129 (argno) (argval).
- FUNL0130 Fast/Unload cancelled during execution of line (linenum).
- FUNL0131 Check failed - Cancel:(condition ... )Warn: (condition ...).
- FUNL0132 To avoid, (primary-suggestion) re-run with CHECK (condition) ALLOW.
- FUNL0133 Checking file (filename) initialized and
- FUNL0134 Inconsistent mixed DBCS string; Fast/Unload cancelled.
- FUNL0135 Invalid hexadecimal string in line (linenum); Fast/Unload cancelled.
- FUNL0136 SIRFIELD block missing for '(filename)', compile not performed.
- FUNL0137 '(Filename)' has been updated with a version (version) of the Sir2000 Field Migration Facility.
- FUNL0138 Version (version) of the Sir2000 Field Migration Facility is incompatible with this release of Fast/Unload.
- FUNL0139 (Type) (name) referenced in (file) and CANCEL set by SIRFIELD command.
- FUNL0140 (Type) (name) referenced in (file) and WARN set by SIRFIELD command.
- FUNL0141 (Stmt) not supported for SIRFIELD RELATED field.
- FUNL0142 (Stmterr) statement may not occur outside FOR EACH RECORD loop.
- FUNL0143 Fast/Unload program must have UAI or FOR EACH RECORD.
- FUNL0144 (PTCH usage).
- FUNL0145 Authorization zap produced (date time).
- FUNL0146 Invalid checksum in authorization zap.
- FUNL0147 (Authorization status) (feature).
- FUNL0148 Multiple (stmt) statements.
- FUNL0149 Error in line (linenum):
- FUNL0150 Cause of error: (description):
- FUNL0151 (Item) expected.
- FUNL0152 Attempt to UNLOAD (sibinfo) SORT or HASH field.
- FUNL0153 Attempt to UNLOAD non-existent occurrence (occ) of field (field).
- FUNL0154 Attempt to re-UNLOAD occurrence (occ) of field (field).
- FUNL0155 Partial UNLOAD, ordered index invalidated.
- FUNL0156 Attempt to UNLOAD SORT or HASH field: occurrence (occ) of field (field).
- FUNL0157 Integer truncated in line (linenum); Fast/Unload cancelled.
- FUNL0158 Null extension record ((extnum)) of record number (basenum).
- FUNL0159 Invalid (construct) in (stmt) statement: (string).
- FUNL0161 Only one SORT PGM= statement allowed.
- FUNL0162 SORT statement for (destination) has no matching OUT TO or UAI TO declaration.
- FUNL0163 Premature EOF while in an IF block.
- FUNL0164 Illegal nested IF.
- FUNL0165 Ill-formed END IF.
- FUNL0166 END IF without IF.
- FUNL0167 Ill-formed ELSE.
- FUNL0168 ELSE without IF.
- FUNL0169 ELSEIF without IF.
- FUNL0170 Ill-formed IF or ELSEIF.
- FUNL0171 Illegal preprocessor () line.
- FUNL0172 Invalid destination name '(string)'.
- FUNL0173 Destination '(string)' already used.
- FUNL0174 More than one default destination specified.
- FUNL0175 No default destination specified.
- FUNL0176 Invalid syntax in TO (dest) prefix.
- FUNL0177 Invalid statement with TO (dest) prefix.
- FUNL0178 Must specify TO (dest) for all UAIs if more than one output stream is declared.
- FUNL0179 Only one UAI allowed with empty program.
- FUNL0180 (number) output records created on destination '(destination)'.
- FUNL0181 Cannot have multiple outputs in online mode if output is directed to a list.
- FUNL0182 Cannot exceed 2048 output destinations.
- FUNL0183 With multiple destinations, RECOUT must specify destination.
- FUNL0185 Can't sort by field name (fieldname) with multiple OUT TO streams.
- FUNL0187 Procs, Aliases not unloaded on destination '(destName)'.
- FUNL0188 (numberProc) Procs, (numberAlias) Aliases unloaded on destination '(destName).'.
- FUNL0189 Procs, Aliases not unloaded.
- FUNL0190 (numberProc) Procs, (numberAlias) Aliases unloaded.
- FUNL0191 Unable to enqueue (destinationname): (reason).
- FUNL0192 Can't use multiple outputs with this version of (product)
- FUNL0194 24-bit sort parm list forced FUNOUT on destination (destinationname).
- FUNL0195 Unknown type, field (name) cannot be processed: (xxxxxx).
- FUNL0196 (stmt) invalid; file contains field of unknown type.
- FUNL0197 FPL version used by online is too new: (xx).
- FUNL0198 Illegal reference to BLOB/CLOB field '(fld)' in file (filNam).
- FUNL0199 BUG evaluating function at line (n): (symptom).
- FUNL0200 Getmain failure attempting to append to long string at line (n); Fast/Unload cancelled.
- FUNL0204 Truncation of %variable with length exceeding 255 (operation).
- FUNL0205 Attempt to use %variable with length exceeding 255 as (context).
- FUNL0206 Attempt to PUT or convert %variable with length exceeding 255.
- FUNL0207 Attempt to ADD or CHANGE non-Lob field with string longer than 255.
- FUNL0208 Record (pageNum) missing page for Lob field.
- FUNL0209 Assignment with Lob field on right hand side followed by extraneous token.
- FUNL0210 Terminated because of System Abend in line (n): (abendCode).