| M204.0001 |
Illegal ANALYZE command |
M204.0994 |
IFAM4 initialized, threads = count |
M204.1954 |
LOGIN=TRUST must be specified if GUESTUSER=ACCEPT |
| M204.0002 |
No ANALYZE work file |
M204.0995 |
IFAM4 termination requested by monitor |
M204.1955 |
Reserved names are not allowed in Open Process |
| M204.0003 |
ANALYZE done |
M204.0996 |
Bug .. sick record found by transform |
M204.1956 |
Remote file fileName at token must be re-opened |
| M204.0004 |
ANALYZE work file opened |
M204.0997 |
Duplicate default cursor options rejected |
M204.1957 |
Not allowed in remote context |
| M204.0005 |
ANALYZE fieldname = fieldname |
M204.0998 |
Unable to enter the subsysName subsystem |
M204.1958 |
NFILES + NRMTFILE > 16383 |
| M204.0006 |
Errors exceed ERMX |
M204.0999 |
Number %variable used for variable-name variable |
M204.1959 |
PQO not linked in |
| M204.0007 |
Unable to add SCLASS to array |
M204.1000 |
Variable-name variable cannot be resolved: value = token |
M204.1960 |
token interface initialized |
| M204.0008 |
Double use of proc dictionary page pageNumber |
M204.1001 |
Screen item variable required, not token |
M204.1961 |
Reopen failed: no such file |
| M204.0009 |
Double use of proc text page pageNumber |
M204.1002 |
Thread logout - IFFNSH or IFDTHRD (IFAM4) |
M204.1962 |
Reopen failed: file not previously opened |
| M204.0010 |
Proc text page loop |
M204.1003 |
IFAM4 termination. shutdownMessage |
M204.1963 |
Invalid pattern token |
| M204.0011 |
Double use of ACT page |
M204.1004 |
Data inconsistent with EDIT_SPEC |
M204.1964 |
Sorted output not possible |
| M204.0012 |
Double use of record description page |
M204.1005 |
Variable-name variable must resolve to screen item: value = token |
M204.1965 |
Global name not found: token |
| M204.0013 |
Please specify ANALYZE work file, then field |
M204.1006 |
File token must be defined with a dataset type of direct or sequential |
M204.1966 |
Non-subsystem file reference by temp group, recompiling |
| M204.0014 |
New free page BP not found |
M204.1007 |
DLBL statement for token must specify direct access |
M204.1967 |
Remote access not allowed from IFAM |
| M204.0015 |
IX says list, not BP |
M204.1008 |
LOUTPB must be increased to at least number |
M204.1968 |
Process timed out waiting for completion of token |
| M204.0016 |
Newfr str |
M204.1009 |
Device support not linked in |
M204.1969 |
Remote file token at token2 token3 token4 |
| M204.0017 |
New Table D pages used = pagesUsed |
M204.1010 |
Bug .. PUTL |
M204.1970 |
No remote file save area available |
| M204.0018 |
subsysName set to stop, remaining users = numberOfUsers |
M204.1011 |
Reading a printer |
M204.1971 |
Remote file unavailable |
| M204.0019 |
*ZAP verify reject, storage remains unchanged |
M204.1012 |
Writing a reader |
M204.1972 |
Remote file physically broken |
| M204.0020 |
variousMessages |
M204.1013 |
Ejecting a reader |
M204.1973 |
Non-TBO remote file |
| M204.0021 |
NSERVS+NUSERS(if swapping)+NSUBTKS+1 > 32767 |
M204.1014 |
Output page buffer full |
M204.1974 |
Input alias requires use of WITH NOALIAS keywords |
| M204.0022 |
Bug .. moduleName routineName |
M204.1015 |
Bug .. full screen length |
M204.1975 |
Procedure may not replace alias: aliasName |
| M204.0023 |
Unknown option: option |
M204.1016 |
Bug .. PGOUT |
M204.1976 |
NOALIAS keyword requires procedure name input |
| M204.0024 |
Unable to include subsystem procedure: procName |
M204.1017 |
IFAM1 - user restart |
M204.1977 |
File fileName may not be accessed remotely |
| M204.0025 |
Bug .. APSY use count |
M204.1018 |
Restart during initialization or termination |
M204.1978 |
Storage could not be obtained for remote access |
| M204.0026 |
Too much audit data |
M204.1019 |
Restart during restart |
M204.1979 |
CCATEMP page could not be obtained for remote access |
| M204.0027 |
Aux procedure dictionary full |
M204.1020 |
User restart loop |
M204.1980 |
Conflicting parameter settings: token and token2 |
| M204.0028 |
subsysName session ended |
M204.1021 |
token PST restarted |
M204.1981 |
Length attribute ignored for output parameter |
| M204.0029 |
File in use by subsystem subsysName, command rejected |
M204.1022 |
User restarting restartType |
M204.1982 |
Illegal jump attempted out of complex subroutine On Unit |
| M204.0030 |
Model 204 needs 370 instruction set |
M204.1023 |
User suspended |
M204.1983 |
Reopen disallowed, open will be done for remote file |
| M204.0031 |
Storage acquired for number name buffer(s) = number bytes |
M204.1024 |
User restarted restartType |
M204.1984 |
Communication error on remote node token processing fileOrGroupName |
| M204.0032 |
Equal sign not found |
M204.1025 |
token support not linked in |
M204.1985 |
Multiple itemids specified: using token |
| M204.0033 |
Invalid expression |
M204.1026 |
Bug .. MAINCMDL |
M204.1986 |
Error on remote node token, fileOrGroupName: token2 |
| M204.0034 |
Variable parameters too large |
M204.1027 |
Time -- no more requests |
M204.1987 |
Remote file fileName may not be accessed with multiple process groups |
| M204.0035 |
Variable parameters may not be reset |
M204.1028 |
Please logout and hang up |
M204.1988 |
Data dictionary shipping error |
| M204.0036 |
Variable length must be positive |
M204.1029 |
User connection lost (phone was hung up) |
M204.1989 |
Data expected and not received |
| M204.0037 |
Invalid syntax |
M204.1030 |
Invalid Model 204 command |
M204.1990 |
Send indicator expected |
| M204.0038 |
%variable already defined - varName |
M204.1031 |
Please login |
M204.1991 |
Invalid conversation state |
| M204.0039 |
Request too long -- STBL, LSTBL=value |
M204.1032 |
Default file or group needed |
M204.1992 |
Recovery: processing roll forward block# token token2 |
| M204.0040 |
Invalid array declaration |
M204.1033 |
Invalid option with DBCS data type |
M204.1993 |
Communication error: status = token, statusd = token2 |
| M204.0041 |
Too many dimensions declared |
M204.1034 |
Command requires file manager privilege |
M204.1994 |
Commit of transaction token completed on token2 node token3 |
| M204.0042 |
Dimension declaration must be positive |
M204.1035 |
Command invalid from procedure |
M204.1995 |
Scattered commit incomplete |
| M204.0043 |
Dimension declaration too large |
M204.1036 |
Updates not permitted |
M204.1996 |
CMS parameter requires CMS environment |
| M204.0044 |
Too few/many subscripts |
M204.1037 |
Command requires single file |
M204.1997 |
IN FILE clause required |
| M204.0045 |
Invalid index variable |
M204.1038 |
Invalid print font specification |
M204.1998 |
IFD2SNCC |
| M204.0046 |
User restart during APSY restart |
M204.1039 |
Feature not linked in |
M204.1999 |
Statement too long for PQO buffer |
| M204.0047 |
From/To missing |
M204.1040 |
Run aborted |
M204.2000 |
Too many variables in remote find retrieval conditions |
| M204.0048 |
Redundant From/To/By |
M204.1041 |
More is invalid -- ignored |
M204.2001 |
Find All Values not allowed in remote context |
| M204.0049 |
Missing right paren |
M204.1042 |
Compilation errors |
M204.2002 |
IFD2PLME |
| M204.0050 |
Invalid value, count, or occurrence |
M204.1043 |
System shutdown in progress; please disconnect |
M204.2003 |
Location missing for remote file |
| M204.0051 |
Unexpected right paren or comma |
M204.1044 |
Output set to normal |
M204.2004 |
Function must be inside On Missing unit |
| M204.0052 |
Illegal term |
M204.1045 |
Request cancelled - unable to lock all records |
M204.2005 |
token missing or invalid token2 token3 |
| M204.0053 |
Field name reference not in a For loop |
M204.1046 |
Bug .. MACMPLX |
M204.2007 |
Remote file token at token2 token3 |
| M204.0054 |
Overflow in re-scaling constant |
M204.1047 |
token is an invalid token2 |
M204.2008 |
LOCATION parameter omitted |
| M204.0055 |
I/O error - datasetName |
M204.1048 |
Command invalid from terminals |
M204.2009 |
Unexpected conversation state token |
| M204.0056 |
Trailing pad character not allowed on preallocated ORDERED or KEY field=fieldName, recnum=X'recNum', value=X'fieldValue' |
M204.1049 |
token token2 command not supported |
M204.2010 |
Comm error status, statusd = token token2 |
| M204.0057 |
Len or DP parameter too large |
M204.1050 |
CCATEMP full: token |
M204.2011 |
Comm error errmsg = token |
| M204.0058 |
Len must be positive |
M204.1051 |
The answer is token |
M204.2012 |
token server token2 error token3 |
| M204.0059 |
Type inconsistent with Len or DP |
M204.1052 |
LOUTPB token to token2 |
M204.2013 |
Function not valid on current thread type |
| M204.0060 |
Model 204 initialization. Version = versionNum datetimecModName cModLevelNum cModDatetime |
M204.1053 |
Buffer usage statistics for VTAMNAME token |
M204.2014 |
Illegal file parameter specified |
| M204.0061 |
SMF system ID = sysID, job name = jobName, step name = stepName, job step = jobStepName, JES ID = JESID |
M204.1054 |
Print n fieldName invalid in this environment |
M204.2015 |
IFDSOPEN |
| M204.0062 |
Execute parameters: parameters |
M204.1055 |
Number of input buffer waits - token |
M204.2016 |
IFDSREOP |
| M204.0063 |
Insufficient main storage to perform enqueue |
M204.1056 |
Number of write waits - token |
M204.2017 |
IFGETAPG |
| M204.0064 |
NDBSERVS cannot be less than NSERVS+2, reset to NSERVS+2 |
M204.1057 |
token out of token2 input buffers are active |
M204.2018 |
IFGETFPL |
| M204.0065 |
NSERVS cannot be greater than NUSERS, reset to NUSERS |
M204.1058 |
token out of token2 output buffers are active |
M204.2019 |
IFGETRD |
| M204.0066 |
Minimum servType required for this user is bytes |
M204.1059 |
Number of terminals in output buffer wait queue is token |
M204.2020 |
File fileName; condition, OPEN command rejected |
| M204.0067 |
Fixed servType for this user is bytes |
M204.1060 |
token not allowed with non swappable servers |
M204.2021 |
Undefined variable type hexValue |
| M204.0068 |
Server size increased to user's fixed size of bytes |
M204.1061 |
There are no token interface statistics to display |
M204.2022 |
Compiled IFAM is required for IFFIND/IFSORT |
| M204.0069 |
Fixed area for user will not fit in largest server, initialization terminated |
M204.1062 |
No name given, command rejected |
M204.2023 |
Cannot flush compilation or variable |
| M204.0070 |
Server too small for user: userNum |
M204.1063 |
File or group token not open, command rejected |
M204.2024 |
Invalid 'in' clause specified |
| M204.0071 |
LRETBL * NUSERS too high |
M204.1064 |
I/O error DUMPing file fileName to token |
M204.2025 |
Invalid record set specification |
| M204.0072 |
User zero won't fit in largest server |
M204.1065 |
token was not previously defined |
M204.2026 |
Access security error: token |
| M204.0073 |
CHKP module was not linked in or journal dataset(s) could not be opened for roll forward logging |
M204.1066 |
token not specified |
M204.2027 |
Rejecting ATTACH - SENSE DATA = hexValue |
| M204.0074 |
Insufficient main storage for MINBUF specification above/below 16meg line, SPCORE = spcore, MINBUF = minbuf, MAXBUF = maxbuf |
M204.1067 |
Invalid token specified |
M204.2028 |
Unable to send reject-attach due to local resource shortage |
| M204.0075 |
Initialization completed. Buffers = noOfBTBbuffers + noOfATBbuffers |
M204.1068 |
token |
M204.2029 |
Required record set parameter omitted |
| M204.0076 |
No files to process, REGENERATE ending |
M204.1069 |
ALLOCATE/FREE failed with return code retCode, error reason code hexValue, information reason code hexValue2, SMS reason code hexValue3 |
M204.2030 |
Invalid IFFIND specification |
| M204.0077 |
Errors detected -- run cancelled |
M204.1070 |
ALLOCATE ddName failed - reason |
M204.2031 |
Open Process failed: CID=token, remote ID=token2, SENSE=hexValue |
| M204.0078 |
Unable to open CCAGRP |
M204.1071 |
Finish during finish |
M204.2032 |
"auto logout" required with "auto login" when security interface active |
| M204.0079 |
Input buffer high watermark - number |
M204.1072 |
Model 204 termination begun |
M204.2033 |
"in order" not valid on remote file |
| M204.0080 |
Expecting single identifier for file name |
M204.1073 |
Online Model 204 termination begun |
M204.2034 |
FRV not valid in remote context |
| M204.0081 |
Can't open CCATEMP |
M204.1074 |
CCATEMP pages used = token out of token2 |
M204.2035 |
Process name or cid token too long |
| M204.0082 |
Timeleft = number |
M204.1075 |
Termination complete: return code = token |
M204.2036 |
Sync level not supported |
| M204.0083 |
File fileName was created by a later release |
M204.1076 |
Do you really want to action |
M204.2037 |
IFFTCH |
| M204.0084 |
Insufficient FTBL space for NGROUP, LFTBL=value |
M204.1077 |
Reply = options |
M204.2038 |
IFFTCHC |
| M204.0085 |
Password checking for CMS is turned on |
M204.1078 |
Please reply "y" or "n" |
M204.2039 |
IFFTCHE |
| M204.0086 |
Password checking for CMS will be bypassed |
M204.1079 |
'end more' not supported for procs with DB2 statements |
M204.2040 |
IFFCHBC |
| M204.0087 |
The 'p' or 'np' options are valid only with CMS |
M204.1080 |
Too many errors |
M204.2041 |
IFFCHBE |
| M204.0088 |
File fileName can no longer be opened by this release |
M204.1081 |
Message facility restart |
M204.2042 |
IFOCUR |
| M204.0089 |
No I/O allowed on terminal while process-to-process is in effect |
M204.1082 |
Subtask hexValue was abended with abcode hexValue2 |
M204.2043 |
IFOCURC |
| M204.0090 |
Dynamic storage acquired during initialization = number, after initialization = number |
M204.1083 |
Duplicate itemid: token |
M204.2044 |
IFOCURE |
| M204.0091 |
PSTname PST starting text |
M204.1084 |
Broadcast message not present |
M204.2045 |
IFCMTR |
| M204.0092 |
PSTname PST stopping text |
M204.1085 |
Insufficient storage for token |
M204.2046 |
Invalid cursor specification |
| M204.0093 |
streamName is a recursive stream definition |
M204.1086 |
Itemid not found: token |
M204.2047 |
Cursor already opened |
| M204.0094 |
Open failed for member memberName of concatenated stream streamName |
M204.1087 |
Command requires open file |
M204.2048 |
Invalid cursor name specified |
| M204.0095 |
Parallel stream streamName disabled, number of members below MINAVAIL |
M204.1088 |
token and token2 are mutually exclusive options |
M204.2049 |
Position lost during evaluation or it was never declared |
| M204.0096 |
Member memberName removed from parallel stream streamName |
M204.1089 |
Message too long for file broadcast |
M204.2050 |
commandName COMMAND USE=option PRIVILEGE=priv |
| M204.0097 |
feature support not linked in |
M204.1090 |
Default cursor item name not found |
M204.2051 |
Invalid token - cursor is not open |
| M204.0098 |
Minimum SERVSIZE for these tables: BTB=bytes; ATB=bytes; NSA=bytes |
M204.1091 |
Invalid user ID |
M204.2052 |
Illegal image definition - previous image has no items |
| M204.0099 |
Minimum SERVSIZE for these tables: BTB=bytes; ATB=bytes; NSA=bytes |
M204.1092 |
Invalid user number specified |
M204.2053 |
Redundant file contexts |
| M204.0100 |
Files must be closed to change XTBL |
M204.1093 |
Sorry, that command is not allowed for a Model 204 system dataset. |
M204.2054 |
Conflicting file contexts |
| M204.0101 |
Allocated global variables will be cleared |
M204.1094 |
token tracing is token2 token3 |
M204.2055 |
IFRELR |
| M204.0102 |
LITBL reset clears stacked arguments |
M204.1095 |
"token" is invalid - specify "on" or "off" |
M204.2056 |
IFRELA |
| M204.0103 |
Invalid option - UTABLE |
M204.1096 |
There were no updates for backout to process |
M204.2057 |
No physical extent information for this dataset, Open statement or command rejected |
| M204.0104 |
Errors detected, table sizes not reset |
M204.1097 |
No message specified |
M204.2058 |
ZZZZCCATEMP: token pg: hexValue what: hexValue2 who: hexValue3 |
| M204.0105 |
New table sizes will not fit in server, table sizes not reset |
M204.1098 |
Specified user not active: token |
M204.2059 |
LOUTPB too small for Hitachi data stream |
| M204.0106 |
RESTOREG not allowed during roll back |
M204.1099 |
Transaction token has been backed out |
M204.2060 |
token name 'token2' is too long |
| M204.0107 |
DUMPG not allowed during roll back |
M204.1100 |
Horizon transport error -- process=token, remoteid=token2, @SESD=hexValue |
M204.2061 |
No Horizon request available for response |
| M204.0108 |
Change applied to disk CCASTAT, further updates to CCASTAT not allowed in this run |
M204.1101 |
Unexpected token receipt -- rh=hexValue, ru=hexValue2... |
M204.2062 |
DMSFRET error, return code = token - run terminated |
| M204.0109 |
Input to RESTORE has wrong file name: fileName |
M204.1102 |
Discarding response from token -- rplseqno=hexValue, sevcbsqn=hexValue2, rh=hexValue3, hsid=hexValue4 |
M204.2063 |
FRN not valid in remote context |
| M204.0110 |
Invalid cmdName command |
M204.1103 |
IFFTCNE |
M204.2064 |
File fileName is not initialized |
| M204.0111 |
Eof or I/O error on input to RESTORE |
M204.1104 |
IFUPDNE |
M204.2065 |
Close-type keyword 'force' is required |
| M204.0112 |
Not enough pages to RESTORE file. At least X'hexValue' pages required |
M204.1105 |
ONINIT -- Online monitor needs statistics module STAT |
M204.2066 |
Multi-tasking requires KOMMOPT=1, NMPSUBS set to 0 |
| M204.0113 |
DSL/LPM alteration implied but not authorized |
M204.1106 |
ONINIT -- too few pseudo subtasks |
M204.2067 |
IFCLST |
| M204.0114 |
CCAGRP not included in job |
M204.1107 |
No statistics in run - MONITOR command invalid |
M204.2068 |
IFPROLS |
| M204.0115 |
Invalid RESTORE or RESTOREG option |
M204.1108 |
Conflicting keywords specified |
M204.2069 |
IFRRFLS |
| M204.0116 |
Bad input to RESTORE: reason |
M204.1109 |
File not open: fileName |
M204.2070 |
token statement does not support member=*, group=groupName |
| M204.0117 |
Not enough pages to make requested alterations during RESTORE |
M204.1110 |
QTBL, LQTBL=value - too small for selective type display |
M204.2071 |
Group member clause may not be used with file$ or location$ |
| M204.0118 |
Eof for CCARF stream after seq# seqNo1 of seqNo2 |
M204.1111 |
Performance monitoring not active |
M204.2072 |
IFDECL |
| M204.0119 |
Internal SQL compilation error |
M204.1112 |
errorType errorInfo |
M204.2073 |
Latest successful checkpoint completed at: token |
| M204.0120 |
CHKP - increase NSUBTKS |
M204.1113 |
Conflicting refresh specifications |
M204.2074 |
token checkpoints have since timed out |
| M204.0121 |
I/O error detected on CHKPOINT stream |
M204.1114 |
Refresh time must be greater than zero |
M204.2075 |
token records currently in active CHKPOINT stream |
| M204.0122 |
Roll forward is cancelled |
M204.1115 |
Undefined word: word |
M204.2076 |
token checkpoints currently in CHKPOINT stream |
| M204.0123 |
Unable to open the checkpoint stream |
M204.1116 |
No closing parenthesis for token |
M204.2077 |
token users currently inhibiting checkpoints |
| M204.0124 |
Checkpoints are not allowed during recovery |
M204.1117 |
Refresh option required after word "every" |
M204.2078 |
Users currently inhibiting checkpoints are: |
| M204.0125 |
Checkpointing not active |
M204.1118 |
Parameter not viewable = parameterName |
M204.2079 |
MINBUF reset to NLRUQ * ((NSERVS + NSUBTKS) * MAXOBUF + 15) = token * ((token2 + token3) * token4 + 15) = token5 |
| M204.0126 |
File fileName not located in directory |
M204.1119 |
Reading parameters |
M204.2080 |
Bug .. DBCFMOD flag was off |
| M204.0127 |
File name required if not administrator |
M204.1120 |
No current file |
M204.2081 |
IFSTOR |
| M204.0128 |
Output set to normal |
M204.1121 |
The value of token cannot be token2 than token3 |
M204.2082 |
IFSTORC |
| M204.0129 |
Request cancelled due to I/O error on USE output file ddName |
M204.1122 |
Invalid parameter = parameterName |
M204.2083 |
IFSTORE |
| M204.0130 |
Checkpoint not in progress |
M204.1123 |
Parameter token not reset |
M204.2084 |
Referencing bad screen |
| M204.0131 |
echoMsgctl |
M204.1124 |
Bump of token token2 scheduled by token3 for token4 user(s) |
M204.2085 |
IFUPDT |
| M204.0132 |
Checkpoint in progress, please wait |
M204.1125 |
Parameter 'input' must specify a valid programmer logical unit |
M204.2086 |
IFUPDTC |
| M204.0133 |
USE data set ddName has a maximum record length of lrecl but the current value of LOBUFF is lobuff |
M204.1126 |
Subsystem subsysName must be started |
M204.2087 |
IFUPDTE |
| M204.0134 |
RESTART must be first command |
M204.1127 |
token FILEORG specified |
M204.2088 |
Required cursor parameter missing |
| M204.0135 |
No CCARF DD statement - can't perform recovery |
M204.1128 |
Can't get file exclusive lock - FRCVOPT was not reset |
M204.2089 |
Cursor parameter invalid on this thread type |
| M204.0136 |
No CHKPOINT DD card - can't perform recovery |
M204.1129 |
Previous request not allowed: tempProcNum |
M204.2090 |
token must be less than or equal to token2 |
| M204.0137 |
RESTART bypassed |
M204.1130 |
Invalid delimiter |
M204.2091 |
IFFRN |
| M204.0138 |
Unable to open streamName stream |
M204.1131 |
Can't action |
M204.2092 |
IFFRNC |
| M204.0139 |
EOF assumed in first pass of streamName stream after seq# seqNo1 of seqNo2 |
M204.1132 |
Float field type unavailable without transform |
M204.2093 |
IFFRNE |
| M204.0140 |
NDIR must be increased. RESTART aborted. |
M204.1133 |
Illegal value for DBCS parameter |
M204.2094 |
token invalid in group context |
| M204.0141 |
Bug .. duplicate file name in checkpoint record |
M204.1134 |
Can't DEASSIGN alias: aliasName |
M204.2095 |
IFRNUM |
| M204.0142 |
Serious error during roll back - run aborted |
M204.1135 |
Can't DEASSIGN a procedure name: procName |
M204.2096 |
IFOCC |
| M204.0143 |
No files changed after last checkpoint, RESTART bypassed |
M204.1136 |
Define procedure token |
M204.2097 |
IFOCCC |
| M204.0144 |
parameter = parmValue but must be at least value (reason) |
M204.1137 |
Unexpected end-of-procedure during procedure definition. Type 'END PROC' to end definition. |
M204.2098 |
IFOCCE |
| M204.0145 |
The following files cannot be recovered: |
M204.1138 |
Invalid delimiter after procedure name |
M204.2099 |
FRCVOPT forced to 'no transaction backout' |
| M204.0146 |
fileName - errorReason |
M204.1139 |
Alias is in use, ignored: alias |
M204.2100 |
Invalid address specified |
| M204.0147 |
RESTART aborted |
M204.1140 |
Procedure token already exists |
M204.2101 |
Reset not allowed, checkpointing not active |
| M204.0148 |
The following files will be rolled back: |
M204.1141 |
Invalid class specification |
M204.2102 |
CPTIME cannot be reset from zero |
| M204.0149 |
fileName |
M204.1142 |
Aliases ignored on previous request redefinition |
M204.2103 |
Zero is an invalid reset value |
| M204.0150 |
Read past beginning of RESTART stream |
M204.1143 |
Can't add alias: alias |
M204.2104 |
Heap storage is required but the LHEAP parameter is set to 0 |
| M204.0151 |
I/O error during roll back. RESTART failed. |
M204.1144 |
Define procedure token |
M204.2105 |
Insufficient heap. MALLOC failed in token |
| M204.0152 |
Unknown checkpoint record type |
M204.1145 |
procedureCmd |
M204.2106 |
Stack overflow. Recursion too deep. |
| M204.0153 |
Bug .. roll back LPM/DSL grew |
M204.1146 |
Procedure token definition ended |
M204.2107 |
File token was created by a later release |
| M204.0154 |
RESTART job jobname |
M204.1147 |
End procedure |
M204.2108 |
File token was created by a later release |
| M204.0155 |
Rerun job jobname |
M204.1148 |
Can't define procedures |
M204.2109 |
File fileName is a DUMP dataset |
| M204.0156 |
Invalid checkpoint date or time: dateOrTime |
M204.1149 |
token has been set to its token2 value: token3 |
M204.2110 |
1NF FILEMODL files must be TBO |
| M204.0157 |
Rolled back to [sub-]transaction checkpoint chkpID |
M204.1150 |
No subsystem files defined for subsystem subsysName |
M204.2111 |
1NF FILEMODL requires field attribute AT-MOST-ONE |
| M204.0158 |
End of roll back |
M204.1151 |
Can't delete procedure that's in use |
M204.2112 |
NUMERIC RANGE fields are incompatible with 1nf FILEMODL |
| M204.0159 |
Can't perform roll forward |
M204.1152 |
Change deleteCmd |
M204.2113 |
Files cannot be reset to 1NF FILEMODL |
| M204.0160 |
Roll back not successful, RF not allowed |
M204.1153 |
Can't delete procedure procedureName |
M204.2114 |
token fields are not supported in files created before token2 |
| M204.0161 |
Warning: pre-compile prefix reason |
M204.1154 |
Invalid options specified |
M204.2115 |
Data received while waiting for CEB response- rh=hexValue, ru=hexValue2 |
| M204.0162 |
Serious error during roll forward - run aborted |
M204.1155 |
Invalid keyword |
M204.2116 |
File fileName does not contain an ordered index |
| M204.0163 |
SERVSIZE increased to bytes |
M204.1156 |
Invalid privilege list |
M204.2117 |
token fields cannot be defined in a non-TBO file |
| M204.0164 |
Storage allocation failed during roll forward |
M204.1157 |
Subsystem subsysName, SCLS definition not found |
M204.2118 |
1NF FILEMODL requires field attribute AT-MOST-ONE |
| M204.0165 |
Missing an update unit from ICL (InComplete List) |
M204.1158 |
Can't token procedure: token2 |
M204.2119 |
AT-MOST/EXACTLY-ONE constraint violation in record token, field ignored: token2 = token3 |
| M204.0166 |
Checkpoint missing from CCARF |
M204.1159 |
Illegal class: class |
M204.2120 |
AT-MOST-ONE violation during Store Record in a non-TBO file |
| M204.0167 |
Checkpointing terminated, run cancelled |
M204.1160 |
Can't display class: class |
M204.2121 |
Repeating AT-MOST-ONE field prohibited |
| M204.0168 |
Bug .. illegal option for roll forward |
M204.1161 |
Include level too deep for DISPLAY |
M204.2122 |
token constraint violation for field token2 in record token3 |
| M204.0169 |
Bug .. reapplying RF entry type entryType, subtype subType from updunit updateUnitNum to file fileName recNum |
M204.1162 |
Default must be file |
M204.2123 |
Value specified violates binary data type validation in record token, field ignored: token2 = token3 |
| M204.0170 |
No files need to be rolled forward |
M204.1163 |
Must be file manager to display others' privs |
M204.2124 |
Value specified violates FLOAT data type validation in record token, field ignored: token2 = token3 |
| M204.0171 |
A discontinuity was detected for file fileName in update updateID |
M204.1164 |
Bug .. procedure loop. Continuing. |
M204.2125 |
FOR EACH VALUE fields are incompatible with 1NF FILEMODL |
| M204.0172 |
End of update updateID at hh:mm:ss.th |
M204.1165 |
Include too deep |
M204.2126 |
User's pushdown list overflowed |
| M204.0173 |
Start of update updateID at hh:mm:ss.th |
M204.1166 |
Too many include argument strings |
M204.2127 |
Sum of MAXBUF + SPCORE exceeds machine size |
| M204.0174 |
Bug .. roll forward did not get the same record number for file fileName old recno: recNum new recno: recNum |
M204.1167 |
ITBL full, LITBL=value -- argument string ignored |
M204.2128 |
There were no updates to file token in token2 |
| M204.0175 |
Roll forward optimization error |
M204.1168 |
[ In fileGroupContext] Include procName |
M204.2129 |
Direction cannot be set to 0 for value set cursors |
| M204.0176 |
Backout log mismatch during roll forward |
M204.1169 |
Can't Include procName |
M204.2130 |
Invalid 'by' value. value = 0 |
| M204.0177 |
Reserved word = text |
M204.1170 |
Error while opening files for subsystem subsysName |
M204.2131 |
FILEMODL can only be set to numeric validation during create - reset not allowed |
| M204.0178 |
Field name omitted |
M204.1171 |
Can't include |
M204.2132 |
1NF FILEMODL requires numeric validation |
| M204.0179 |
Table B search implied for field = fieldName in context name |
M204.1172 |
Previous request not defined |
M204.2133 |
IFCCUR |
| M204.0180 |
Table B search implied for field = fieldName in context name |
M204.1173 |
Can't edit reason procName |
M204.2134 |
IFFAC |
| M204.0181 |
Can't reserve buffer, not enough left. |
M204.1174 |
No procedure file |
M204.2135 |
"into" arguments must be string arrays |
| M204.0182 |
Statement label expected, not token |
M204.1175 |
Proc.dict: not enough space at page, cell: hexCell |
M204.2136 |
IFFACE |
| M204.0183 |
Insufficient access to select on field fieldname |
M204.1176 |
Can't EDIT (not authorized) into procName |
M204.2137 |
Group update file is unavailable |
| M204.0184 |
Missing ')' |
M204.1177 |
Procedure rejected. PDSIZE=0 in file fileName |
M204.2138 |
End of input stream, level = token |
| M204.0185 |
Illegal use of fieldname variable |
M204.1178 |
No user classes defined for subsystem subsysName |
M204.2139 |
$pack precision must be in range 1-16 |
| M204.0186 |
New or invalid list name in list$ clause |
M204.1179 |
Unable to allocate enough storage to process password table |
M204.2140 |
Function cannot execute while cursor is open against specified set |
| M204.0187 |
Point$ not allowed in groups |
M204.1180 |
Invalid keyword: word |
M204.2141 |
NSUBTKS too low, cant initialize DKBMTIME PST |
| M204.0188 |
No sorted groups |
M204.1181 |
Unexpected SNA control message for token, CONTROL = X'hexValue', SENSE = X'hexValue2' |
M204.2142 |
Maximum number of iterations exceeded for procedure: procName |
| M204.0189 |
File is not sorted |
M204.1182 |
Invalid class: class |
M204.2143 |
Insufficient main storage for SPCORE specification token 16meg line, SPCORE = token2, MINBUF = token3, MAXBUF = token4 |
| M204.0190 |
File$ and Location$ must be in group context |
M204.1183 |
Alias buffer overflow |
M204.2144 |
token diagnostic DUMP of MRFT |
| M204.0191 |
File not in current group: file = filename |
M204.1184 |
Alias name syntax error, alias ignored: aliasName |
M204.2145 |
token hexValue |
| M204.0192 |
And or Than required, not word |
M204.1185 |
Invalid syntax for procedure name |
M204.2146 |
"count" argument cannot be a literal |
| M204.0193 |
Inconsistent range conditions |
M204.1186 |
Bad previous request number |
M204.2147 |
Deferred update dataset token for file fileName contains updates for file token2 |
| M204.0194 |
Than required, not word |
M204.1187 |
VTAM logmsg failed, logmsg length token, please logon. |
M204.2148 |
Btree ordering impossible - cursor not opened |
| M204.0195 |
Unit unitType used by ddName DD statement currently in use |
M204.1188 |
Unable to run procedure procName for subsystem subsysName-GTBL full, LGTBL=value |
M204.2149 |
I/O error on TAPE5 dataset, application of index updates aborted |
| M204.0196 |
Data set datasetName used by ddName DD statement currently in use |
M204.1189 |
No procedure name given |
M204.2150 |
Start subroutine |
| M204.0197 |
Invalid NOTERM value |
M204.1190 |
MAXBUF set to same value as MINBUF = token |
M204.2151 |
End subroutine |
| M204.0198 |
Request too long -- VTBL, LVTBL=value |
M204.1191 |
Maximum header or trailer number exceeded |
M204.2152 |
Statement turned off parallel |
| M204.0199 |
Open failed for VTAM applid applName with reason code X"hexValue" |
M204.1192 |
Can't expand ACT in fileName |
M204.2153 |
Dataset token is already open |
| M204.0200 |
Insufficient access to read field fieldname |
M204.1193 |
Unable to run subsystem subsysName error procedure |
M204.2154 |
Subsystem subsysName is not active |
| M204.0201 |
Unable to start PSTname PST, increase NSUBTKS |
M204.1194 |
Destination must be a list of paired processgroup-symbolic names or a single processgroup |
M204.2155 |
'token' is invalid -- type '*trace ?' for usage |
| M204.0202 |
File records requires either an INVISIBLE, KEY or INVISIBLE, ORDERED field: field = fieldName |
M204.1195 |
Can't close all files from a subsystem |
M204.2156 |
Unable to allocate sufficient storage for message buffer: rc = token |
| M204.0203 |
"Store" requires update file |
M204.1196 |
Missing arguments |
M204.2157 |
M204XSVC version = token |
| M204.0204 |
Parameter parmName obsolete and not reset |
M204.1197 |
Error in ACT modification |
M204.2158 |
Global token definition doesn't match value in GTBL, token2, name hash=hexValue |
| M204.0205 |
Sort/hash key required in new record |
M204.1198 |
Have not added user class: class |
M204.2159 |
$date/$datej/$datep format parameter must be 0, 1 or 2 |
| M204.0206 |
Unsorted file, sort key rejected |
M204.1199 |
UCLASS=ALL not allowed. ACT does not exist in fileName |
M204.2160 |
Global screens may not contain multiple pages |
| M204.0207 |
VTAM NTO interface restarted |
M204.1200 |
Roll token transaction number for the following files: |
M204.2161 |
Secondary declarations of globals must specify 'Common' |
| M204.0208 |
Updating sort key not permitted |
M204.1201 |
Unexpected end of command |
M204.2162 |
Global Images may not contain Len/Occurs Unknown |
| M204.0209 |
New value null or too long for fieldName |
M204.1202 |
More than one name and/or UCLASS keyword |
M204.2163 |
Trouble with disk I/O on file token post code = x'hexValue' csw = x'hexValue2' |
| M204.0210 |
Number required, not: word |
M204.1203 |
File fileName was last updated on token |
M204.2164 |
Trouble with disk I/O post code = x'hexValue' CSW = x'hexValue2' |
| M204.0211 |
Request too long - QTBL, LQTBL=value |
M204.1204 |
Invalid procedure name: procName |
M204.2165 |
Subroutine parameter list incorrectly defined |
| M204.0212 |
Word too long |
M204.1205 |
Buffer overflow |
M204.2166 |
Offload stopped for ring stream token due to run termination |
| M204.0213 |
Phrase too long |
M204.1206 |
More than one UCLASS or PCLASS keyword |
M204.2167 |
A close error has been detected on dataset token |
| M204.0214 |
Field names unavailable in groups |
M204.1207 |
Invalid class number: class |
M204.2168 |
Nonsensical If statement |
| M204.0215 |
Illegal statement destination - statmentLabel |
M204.1208 |
Invalid access: code |
M204.2250 |
Model204 must run either with M204XSVC installed or from an APF-authorized library |
| M204.0216 |
Missing call destination statement label |
M204.1209 |
Retry is not valid in an On token unit |
M204.2251 |
IFLCKGET error: token |
| M204.0217 |
Too many parts in called statement number |
M204.1210 |
"ALL" is invalid for name list in SECURE command |
M204.2252 |
IFLCKREL |
| M204.0218 |
Rest of line ignored after: text |
M204.1211 |
Invalid PCLASS list |
M204.2253 |
Subsystem subsysName, recordType - record contains invalid data |
| M204.0219 |
Return valid only in subroutine |
M204.1212 |
On Error on-unit ignored - VTBL full, LVTBL=value |
M204.2254 |
Value specified in LDC violates FLOAT data type validation, field ignored: token = token2 |
| M204.0220 |
Subroutine statement cannot be nested |
M204.1213 |
P.D. page full. Can't secure proc: token |
M204.2255 |
Value specified in LDC violates BINARY data type validation, field ignored: token = token2 |
| M204.0221 |
VTAM close error: X15, errflag= x'hexValue' x'hexValue2' |
M204.1214 |
token |
M204.2256 |
IFLCKGET |
| M204.0222 |
Retry valid only within an On unit |
M204.1215 |
XTBL, LXTBL=value - not enough space |
M204.2257 |
Connection rejected by token with explanation: |
| M204.0223 |
Statement label multiply defined |
M204.1216 |
Record locking conflict |
M204.2258 |
SESSIONS parameter too low on DEFINE token to complete connection with token2 |
| M204.0224 |
Request too long -- NTBL, LNTBL=value |
M204.1217 |
IFBOUT |
M204.2259 |
'no transaction backout' forces 'roll forward all the way' |
| M204.0225 |
Too many parts in statement number |
M204.1218 |
IFCMMT |
M204.2260 |
Connection token with token2 token3, - token4 source was token5 |
| M204.0226 |
Request too long -- QTBL, LQTBL=value |
M204.1219 |
Record locking table full |
M204.2261 |
"end more" not supported for procs with DB2 statements |
| M204.0227 |
User may not access file/group |
M204.1220 |
File fileName not initialized |
M204.2262 |
DB2: invalid statement: token |
| M204.0228 |
Part of statement ignored |
M204.1221 |
File fileName is physically inconsistent |
M204.2263 |
DB2: invalid token stmt: expected 'token2', found 'token3' |
| M204.0229 |
Invalid statement |
M204.1222 |
File fileName is full |
M204.2264 |
DB2: cursor name longer than 18 chars: token |
| M204.0230 |
Invalid text after "end" |
M204.1223 |
Enq .. waiting for token token2 token3 token4 token5 token6 token7 |
M204.2265 |
DB2: maximum number of cursors exceeded |
| M204.0231 |
Too many files in group |
M204.1224 |
Bug .. CENQ |
M204.2266 |
DB2: string too long: token |
| M204.0232 |
File or group isn't open - name |
M204.1225 |
Resource locking table full |
M204.2267 |
DB2: indicator variable token not supported for token2 stmt |
| M204.0233 |
Duplicate files in group - filename |
M204.1226 |
Bug .. CDEQ |
M204.2268 |
DB2: (limitation) host variable token may not be token2 |
| M204.0234 |
Functions illegal in group definitions |
M204.1227 |
Record locking table full |
M204.2269 |
DB2: CONNECT must be first DB2 command |
| M204.0235 |
Group support not linked in |
M204.1228 |
Bug .. reuse queue error, file fileName |
M204.2270 |
DB2: only 1-byte kanji shifts supported |
| M204.0236 |
Invalid function in 'in' clause |
M204.1229 |
Table B full -- inserts --: file fileName |
M204.2271 |
DB2: z/OS environment required |
| M204.0237 |
$Curfile must be in For loop |
M204.1230 |
Table token full -- appends --: file fileName |
M204.2272 |
DB2: insufficient memory |
| M204.0238 |
Current group has no update file |
M204.1231 |
Table B full -- spills --: file fileName |
M204.2273 |
DB2: undeclared cursor: token |
| M204.0239 |
Cto statement must be within record loop |
M204.1232 |
Value cannot be converted for preallocated field token |
M204.2274 |
Invalid D2CB offset |
| M204.0240 |
FRV impossible: field = fieldName |
M204.1233 |
token, bad record number token2 for file fileName |
M204.2275 |
File access rule table truncated |
| M204.0241 |
Sorted/group FRV support not linked in |
M204.1234 |
Adding too many occurrences of token |
M204.2276 |
$wdwrap: invalid width value |
| M204.0242 |
SORTKEY or ORDERED field not found -- "IN ORDER" ignored |
M204.1235 |
Zap missing for patch number hexValue (hex) |
M204.2277 |
$wdwrap: line too long |
| M204.0243 |
"in order" not valid in group context |
M204.1236 |
Table D list page bug: file fileName |
M204.2278 |
$wdwrap: hyp point cannot exceed width |
| M204.0244 |
Positive number required |
M204.1237 |
token did not fit in preferred overflow area |
M204.2279 |
$wdwrap: invalid hyphenation point |
| M204.0245 |
Maximum pause time is 600 seconds |
M204.1238 |
token of file fileName was last required on token2 |
M204.2280 |
$justify: justification type invalid |
| M204.0246 |
VTAM request failure for termid: X0,FDBK2=x'hexValue',x'hexValue2' |
M204.1239 |
Extension missing for recNum in file fileName |
M204.2281 |
$justify: invalid width value |
| M204.0247 |
Screen, menu, or image name not specified |
M204.1240 |
Field descriptions not supported |
M204.2282 |
No "on missing" unit or transaction is lost |
| M204.0248 |
Clear Tag must refer to input item |
M204.1241 |
Invalid field name: token |
M204.2283 |
Commit failed |
| M204.0249 |
Use of menu requires non-zero LFSCB |
M204.1242 |
Old- and new-style definitions may not be mixed |
M204.2284 |
'Datalen' was invalid or omitted in token process definition |
| M204.0250 |
token is an invalid menu option |
M204.1243 |
Invalid delimiter following field name |
M204.2285 |
Warning: 'Datalen' omitted |
| M204.0251 |
Title must be first menu line |
M204.1244 |
Backout is invalid for non-transaction backout files (as listed by M204.2792) |
M204.2286 |
Error processing remote node: token, unable to stop subsystems |
| M204.0252 |
Menus limited to 23 lines |
M204.1245 |
Parameter token not reset due to conflicting attributes |
M204.2287 |
TCP/IP error: token |
| M204.0253 |
"end menu" missing |
M204.1246 |
Bug .. DFIN, bad record number token for file fileName |
M204.2288 |
TCP/IP cleanup has closed socket token for user token2 |
| M204.0254 |
Name given is not a screen |
M204.1247 |
Procedure procName in subsysName made resident |
M204.2289 |
token valid when REMOTEID specifies an internet address |
| M204.0255 |
Name given is not a menu |
M204.1248 |
Looking for close token |
M204.2290 |
token error: errno token2 |
| M204.0256 |
Negative message length on VTAM send |
M204.1249 |
Unexpected end of subsystem procedure |
M204.2291 |
MVS IUCV emulation failure |
| M204.0257 |
VTAM send exception for dev: SSENSEI, SSENSMI, USENSEI - X'hexValue' |
M204.1250 |
End of input data |
M204.2292 |
IUCV connection refused by TCPIP - sever reason code=token |
| M204.0258 |
Invalid option: word1 word2 |
M204.1251 |
Line too long |
M204.2293 |
Socket call failed due to token macro, X15=x'hexValue' |
| M204.0259 |
Unexpected end of statement |
M204.1252 |
Unable to stop subsystem subsysName |
M204.2294 |
TCP/IP interface 'token' has already been created |
| M204.0260 |
item must be quoted string or %variable |
M204.1253 |
Unexpected end of included data |
M204.2295 |
TCP/IP interface name must be 1-8 characters long |
| M204.0261 |
Logon failed - name; increase number of M204 VTAM type terminals |
M204.1254 |
User language statement is invalid in this conversation state |
M204.2296 |
TCP/IP interface 'token' is disabled or has not been created |
| M204.0262 |
FSCB full, LFSCB=value. Screen/Menu/Image compilation aborted. |
M204.1255 |
File fileName, procedure token, cmmtrl substitution completed |
M204.2297 |
Conditions not met for backward processing |
| M204.0263 |
At/to must be between 1 and n |
M204.1256 |
Period expected: character = char |
M204.2298 |
fileOrGroupName is disabled token |
| M204.0264 |
VTAM closedown/crash |
M204.1257 |
File token must be defined with a dataset type of SEQUENTIAL |
M204.2299 |
Conflicting parameters, NRMTLOCS and NRMTFILE |
| M204.0265 |
Use of screen requires non-zero LFSCB |
M204.1258 |
DLBL statement for token cannot specify direct access |
M204.2300 |
CPU ID authorization zap must be applied |
| M204.0266 |
Line ignored after invalid item: token |
M204.1259 |
Table A full - token file fileName |
M204.2301 |
Error processing remote node: token, increase NRMTLOCS |
| M204.0267 |
Title must be first screen line |
M204.1260 |
token was previously defined with different attributes, new token2 options ignored |
M204.2302 |
No room in GTBL, LGTBL=value - SETGRC |
| M204.0268 |
Unexpected end of line in screen/menu item |
M204.1261 |
New field names not permitted |
M204.2303 |
SETGRC variable(s) missing |
| M204.0269 |
Null item not allowed |
M204.1262 |
No new preallocated fields allowed |
M204.2304 |
Reset not allowed, CHKPTIMR PST not active |
| M204.0270 |
At column already used |
M204.1263 |
Record description full for file fileName |
M204.2305 |
Node references do not match saved compilation references, recompiling |
| M204.0271 |
Len must be between 1 and n |
M204.1264 |
Preallocated field block too big in file fileName token token2 |
M204.2306 |
Error during remote APSY load: token |
| M204.0272 |
Duplicate At, To, or Len specification |
M204.1265 |
No such token name: token2 = fieldname |
M204.2307 |
IFBOUTP |
| M204.0273 |
Default must be quoted string |
M204.1266 |
Nonexistent record referenced - recNum in file fileName |
M204.2308 |
Single-node update violation: groupName file fileName |
| M204.0274 |
Duplicate Default specification |
M204.1267 |
Multiple field name definitions not allowed when field option specified |
M204.2309 |
User not defined in sclass token |
| M204.0275 |
Duplicate Tag specification |
M204.1268 |
Bug .. SBNU$+hexValue: damaged record - token in file fileName |
M204.2310 |
Client and service node record security IDs do not match |
| M204.0276 |
Tag must be single quoted character |
M204.1269 |
Bug .. RTSTRL |
M204.2311 |
Subsystem subsysName is being started |
| M204.0277 |
Numeric conflicts with Alpha or Alphanum |
M204.1270 |
Table C full - property entry, file fileName |
M204.2312 |
Subsystem subsysName stopped at locationName |
| M204.0278 |
APSY: "name1" = "name2" |
M204.1271 |
The ALTIODEV parameter is valid only in the CMS version |
M204.2313 |
Communication error on remote node locationName processing subsystem subsysName |
| M204.0279 |
Nonnumeric value specified for range |
M204.1272 |
Table C full - page entry: file fileName |
M204.2314 |
Error on remote node token: token2 |
| M204.0280 |
Verify string should be quoted |
M204.1273 |
Table C full - REDEFINE: file fileName |
M204.2315 |
Subsystem subsystemName at locationName is unavailable |
| M204.0281 |
Screen itemid must be between 1 and 32767 |
M204.1274 |
Bug .. FILESWP |
M204.2316 |
TCPIP error: token, process=token2, remoteid=token3, seituh=token4 |
| M204.0282 |
"end screen" missing |
M204.1275 |
Bug2 .. FILESWP |
M204.2317 |
Recalling migrated dataset token |
| M204.0283 |
VTAM 3270 interface restarted |
M204.1276 |
Insufficient access to select on field token |
M204.2318 |
fileOrGroupName is disabled |
| M204.0284 |
Input item name must be unquoted |
M204.1277 |
Insufficient access to read field token |
M204.2319 |
Open for groupName failed: all members missing |
| M204.0285 |
"name" is a reserved item name |
M204.1278 |
Insufficient access to update field token |
M204.2320 |
Foundset or list not specified on the Position statement |
| M204.0286 |
Permanent 3270 I/O error on termid, SENSE = hexValue |
M204.1279 |
Insufficient access to add field token |
M204.2321 |
Position name not specified on the Position statement |
| M204.0287 |
VTAM receive failed for terminal dev |
M204.1280 |
Field not found |
M204.2322 |
Synonym token results in duplicate file entry for token2 |
| M204.0288 |
Skip requires positive number |
M204.1281 |
Can not initialize more than NSUBTKS pseudo subtasks |
M204.2323 |
"remember" can be specified within a record loop only |
| M204.0289 |
Invalid syntax for skip |
M204.1282 |
Parallel stream token disabled, record token2 is not the same for all members |
M204.2324 |
LANGFILE index=token not found in NLANG for file fileName |
| M204.0290 |
Index change error, file fileName, field=fieldName, recnum=x'hexValue', type=x'hexValue2', field value=x'hexValue3' |
M204.1283 |
Bug .. SERVSWAP |
M204.2325 |
Backout/Commit token statistics overflow: token2 token3 |
| M204.0291 |
Index delete error, file fileName, field=fieldName, recnum=x'hexValue', type=x'hexValue2', field value=x'hexValue3' |
M204.1284 |
Bug .. too few buffers |
M204.2326 |
Number of lines to be skipped must be between 0 and 100 |
| M204.0292 |
Error, running procName with "errClass" = "value" |
M204.1285 |
Trouble with server I/O |
M204.2327 |
PQO version incompatibility with remote node: token |
| M204.0293 |
NUMERIC RANGE delete failure on recnum=x'hexValue'; value not found for field=fieldName, type=x'hexValue2' |
M204.1286 |
Bug .. TIMERENQ |
M204.2328 |
token |
| M204.0294 |
NUMERIC RANGE add failure on recnum=x'hexValue'; value already defined for field=fieldName, type=x'hexValue2' |
M204.1287 |
Bug .. TIMEREXP |
M204.2329 |
subsysName at locationName unavailable |
| M204.0295 |
Item name missing |
M204.1288 |
CMS interface version = token |
M204.2330 |
Subsystem subsysName start in progress |
| M204.0296 |
Default title must appear before title line |
M204.1289 |
(LGTBL - GTBLHASH*10) must be at least 288 for subsystem processing, LGTBL=value |
M204.2331 |
File fileName isn't defined to service subsystem subsysName |
| M204.0297 |
Tag must refer to input item |
M204.1290 |
Invalid PRIORITY specification |
M204.2332 |
Requested privileges for file token exceed allowed maximum |
| M204.0298 |
Invalid option: option |
M204.1291 |
Invalid PRIORITY specification |
M204.2333 |
Subsystem definition does not allow remote access |
| M204.0299 |
VTAM logon failed - dev; X0, FDBK2 = x'hexValue' x'hexValue2' |
M204.1292 |
Invalid option 'token' -- type '*TRACE ?' for usage |
M204.2334 |
Location pattern is required |
| M204.0300 |
VTAM reasonText for terminal code - termid, reason code - x'hexValue' |
M204.1293 |
Entry to blockmode disallowed |
M204.2335 |
Shadow group created: groupName |
| M204.0301 |
Referenced statement label undefined |
M204.1294 |
LU62 VTAM token failure; RETNCD, FDBK2 = hexValue, hexValue2; SENSE = hexValue3 |
M204.2336 |
Shadow group deleted: groupName |
| M204.0302 |
List name can't begin with % |
M204.1295 |
No audit trail or journaling stream(s) |
M204.2337 |
Location$ is valid in the PQO environment only |
| M204.0303 |
User bumped or interrupted with an urgent message, process terminated |
M204.1296 |
Data conversion error for field token record number token2 in file fileName |
M204.2338 |
Subsystem subsysName could not be stopped at locationName |
| M204.0304 |
Subscripts required for %variable |
M204.1297 |
Audit trail message(s) have been lost |
M204.2339 |
Subsystem subsysName not active at locationName |
| M204.0305 |
Subscripts or length specification not allowed |
M204.1298 |
Unable to open CCAJRNL |
M204.2340 |
Invalid language argument: 'token' for $function: token2 |
| M204.0306 |
Default Len not positive |
M204.1299 |
Auditing not possible |
M204.2341 |
No active subsystem like token |
| M204.0307 |
Default Len or DP too large |
M204.1300 |
RESTART command requires checkpoint logging - run terminated |
M204.2342 |
No active subsystem like token from token2 |
| M204.0308 |
Illegal variable type for field name variable |
M204.1301 |
No journal stream(s) opened |
M204.2343 |
The location must specify a remote node |
| M204.0309 |
Illegal use of %variable |
M204.1302 |
Abnormal timeout return from function in ACB services |
M204.2344 |
This command only valid in z/OS or CMS |
| M204.0310 |
Bug .. RDSN |
M204.1303 |
I/O error detected on token stream |
M204.2345 |
Remote access not allowed, NRMTLOCS not set |
| M204.0311 |
Unacceptable statement reference |
M204.1304 |
IFERLC |
M204.2346 |
Remote file token location name not found |
| M204.0312 |
Disk version of password table too large to read into allocated storage |
M204.1305 |
Unbind failed for bumped or timed out session |
M204.2347 |
Compilation not saved - token |
| M204.0313 |
token name expected, not reserved word: word |
M204.1306 |
Merged journal not allowed for RESTART |
M204.2348 |
Subsystem record locking conflict |
| M204.0314 |
Insufficient access to update field fieldname |
M204.1307 |
token logon rejected - token2 (reason code: hexValue) |
M204.2349 |
Referenced list undefined |
| M204.0315 |
Insufficient access to add field fieldname |
M204.1308 |
Concatenation not allowed for CCARF |
M204.2350 |
Socket call completed abnormally due to token |
| M204.0316 |
Recursive ON units exceed MAXOND: Evaluation stopped |
M204.1309 |
Journalling terminated, run cancelled |
M204.2351 |
TCP/IP interface 'token' has been created |
| M204.0317 |
USE $JOB or USE READER accepts no arguments |
M204.1310 |
Journalling terminated |
M204.2352 |
TCIU sever in progress for interface token - reason=token2 |
| M204.0318 |
Invalid use of subscript |
M204.1311 |
CCAAUDIT formatting terminated |
M204.2353 |
Socket call completed with IBM errno=token |
| M204.0319 |
Invalid subscript syntax |
M204.1312 |
CCAAUDIT formatting terminated |
M204.2354 |
Socket call cancellation failed - errno=token |
| M204.0320 |
Field is INVISIBLE: field = fieldName |
M204.1313 |
Unable to open token |
M204.2355 |
Link token being closed due to token2 |
| M204.0321 |
Invalid cross-reference |
M204.1314 |
IFEFCC |
M204.2356 |
Unable to allocate sufficient sockets to open token, requested token2, received token3 |
| M204.0322 |
Expected argument missing |
M204.1315 |
Transport=CRAM is not supported in CMS |
M204.2357 |
TCPIP late response for token from token2 -- TUHSQN=hexValue, SEICBSQN=hexValue2, TH=hexValue3 |
| M204.0323 |
Invalid use of %variable |
M204.1316 |
Can't allocate the journal buffer |
M204.2358 |
Expecting "global" not token |
| M204.0324 |
Screen, menu, or image name not defined: name |
M204.1317 |
Can't process token |
M204.2359 |
Position name not specified on the Remember statement |
| M204.0325 |
Only 32767 items allowed per screen panel |
M204.1318 |
Incorrect volume mounted for token |
M204.2360 |
Position token has not been declared |
| M204.0326 |
Colon not allowed in screen, menu, or image name |
M204.1319 |
EOF assumed for ddName |
M204.2361 |
Foundset or list not specified on the Remember statement |
| M204.0327 |
Duplicate screen, menu, or image name: name |
M204.1320 |
Offload complete for member token of ring stream token2 |
M204.2362 |
Position name not specified on the Declare statement |
| M204.0328 |
Duplicate input/prompt name: name |
M204.1321 |
Alias argument isn't compatible with previous call |
M204.2363 |
Position has already been defined |
| M204.0329 |
Screen or image item name not found: name |
M204.1322 |
Block of length token read from token2 is not a multiple of the LRECL of token3 |
M204.2364 |
"position" can not be used in a for loop |
| M204.0330 |
Bug .. full screen item name |
M204.1323 |
Block of length token read from token2 with a block descriptor word which specifies a length of token3 |
M204.2365 |
"remember" is invalid in ad hoc group context |
| M204.0331 |
POLLNO must start at 1 and ascend |
M204.1324 |
Block of length token read from token2 contains a record at offset token3 with a record descriptor word which specifies a length of token4 |
M204.2366 |
"remember" is invalid in a for loop that has no foundset |
| M204.0332 |
retCode value from CRFS operation |
M204.1325 |
LU62 VTAM token link failure; RETNCD, FDBK2 = hexValue hexValue2; SENSE = hexValue3 |
M204.2367 |
token file = token2, procedure = token3, line = token4 |
| M204.0333 |
Parameter too long: parmName |
M204.1326 |
Page trace - hexPageNumber |
M204.2368 |
Included from token token2 |
| M204.0334 |
LOUTPB > PAGESIZE minus 40; NBKPG will be reset to zero |
M204.1327 |
Number of U DD lines output = count |
M204.2369 |
DKUPDT disk write failure: token, post code = x'hexValue' CSW = x'hexValue2' |
| M204.0335 |
LOUTPB parameter too small |
M204.1328 |
System pushdown list overflowed |
M204.2370 |
DKUPDTWT must be <= CPTIME*30 |
| M204.0336 |
retCode value from CRIO op |
M204.1329 |
User's pushdown list overflowed |
M204.2371 |
CHKP - increase NSUBTKS or set DKUPDTWT=0 |
| M204.0337 |
Wrong version for CCASTAT - hexVersion |
M204.1330 |
PRT-PART -- NSUBTKS too small |
M204.2372 |
STOPU requires that "on" or "off" be specified as last argument |
| M204.0338 |
Incorrect format for CCASTAT |
M204.1331 |
Run killed - no more time |
M204.2373 |
STOPU will not stop the userid issuing the STOPU command |
| M204.0339 |
CCASTAT dataset missing |
M204.1332 |
Long request - exceeded parmName <= number |
M204.2374 |
User scheduled for stop |
| M204.0340 |
Unable to open CCASTAT |
M204.1333 |
Cancelled w/ DUMP |
M204.2375 |
System manager has stopped you; answering "yes" to the following message will have no effect until the system manager turns stop off |
| M204.0341 |
Unable to open CCASTAT |
M204.1334 |
Insufficient main storage for operator reply |
M204.2376 |
Specified user not logged on: token |
| M204.0342 |
CTTC: statusInfo |
M204.1335 |
Insufficient storage available to allocate token bytes for token2 |
M204.2377 |
Key too long, sort key has been truncated to 760 bytes |
| M204.0343 |
Change applies only to this run, updates to CCASTAT not allowed |
M204.1336 |
Region too small - run terminated |
M204.2378 |
Security trusted login feature disabled |
| M204.0344 |
Disk version of CCASTAT changed by job jobName yy.ddd hh:mm |
M204.1337 |
Constraint inconsistency encountered |
M204.2379 |
Invalid trusted user-id length=token |
| M204.0345 |
CCASTAT updated |
M204.1338 |
No On Attention unit |
M204.2380 |
Could not find DSN for file selected in $dsn |
| M204.0346 |
Restart during update, CCASTAT updates disallowed |
M204.1339 |
File fileName, procedure transform completed |
M204.2381 |
No file entered in $dsn |
| M204.0347 |
Password |
M204.1340 |
Incorrect TRANSFORM command parameter |
M204.2382 |
No DSN number or DSN out of range |
| M204.0348 |
System shutdown in progress, logins not allowed |
M204.1341 |
Locked file fileName for subsystem subsysName is already opened |
M204.2383 |
Processgroup must specify link or sessiongroup |
| M204.0349 |
Login failed or Enter logoff |
M204.1342 |
Unable to run CCASYS procedure: token |
M204.2384 |
token was previously allocated to token2 |
| M204.0350 |
New password accepted |
M204.1343 |
IFFWOL |
M204.2385 |
Recall failed for dataset token return code token2 |
| M204.0351 |
New password rejected |
M204.1344 |
IFFWOLC |
M204.2386 |
An LU services error was received from REMOTEID=remoteID PROCESS=processName SENSE CODE=num |
| M204.0352 |
IODEV=nn, Ok uuuuuuuuuu aaaaaaaaaa llllll yy.ddd mmm dd hh.mm.ss ccc nnnnnnnn |
M204.1345 |
IFFWOLE |
M204.2387 |
Unknown or unsupported gds type received from remoteid=token process=token2 gdsid=hexValue |
| M204.0353 |
uuuuuuuuuu aaaaaaaaaa llllll yy mmm dd hh.mm |
M204.1346 |
Server area greater than cylinder capacity for token. Cylinder size = token2 bytes. |
M204.2388 |
Procedure procName in subsysName is no longer resident |
| M204.0354 |
All users are logged out |
M204.1347 |
Sessiongroup winners cannot exceed maximum |
M204.2389 |
Error in sortget exit, sort terminated. |
| M204.0355 |
Invalid keyword: keyword |
M204.1348 |
Can't open server dataset: token |
M204.2390 |
Sorted files may not specify a non-US LANGFILE |
| M204.0356 |
Password may not be changed |
M204.1349 |
Insufficient space allocated to server dataset(s), additional bytes required = token |
M204.2391 |
Subsystem subsysName, recordType - translation failed for field fieldName |
| M204.0357 |
Invalid RESTART option: option |
M204.1350 |
Parallel stream streamName member memberName record recordNum seqNo is of length length |
M204.2392 |
Invalid LOADNULLS option: must be ON or OFF |
| M204.0358 |
Password changed |
M204.1351 |
LU62 VTAM action errType X15, X0 = X15, X0 = X hexValue; RETNCD, FDBK2 = hexValue2 hexValue3; SENSE = hexValue4 |
M204.2393 |
Subsystem subsysName, can't login PQO user |
| M204.0359 |
Invalid password |
M204.1352 |
Server too big by number bytes |
M204.2394 |
Subsystem subsysName, no remote login after autostart |
| M204.0360 |
Terminal security violation - userID |
M204.1353 |
IDAL count exceeded, EXCPVR not possible |
M204.2395 |
Subsystem subsysName, recordType - record missing |
| M204.0361 |
Password table not in core, file not secured |
M204.1354 |
Application loop involving error procedure in subsystem subsysName |
M204.2396 |
With result longer than 255 bytes was truncated |
| M204.0362 |
File fileName text |
M204.1355 |
Unknown error message for VTAMLU62 exit |
M204.2397 |
'token' is not a valid option for the CLOSE LINK command |
| M204.0363 |
File fileName is not secured, command ignored |
M204.1356 |
LU62 VTAM error; FMH5 (attach) expected |
M204.2398 |
REMOTEID='token' MODENAME='token2': undefined for link 'token3' |
| M204.0364 |
Password table has been corrupted - notify system manager |
M204.1357 |
Open error - errType |
M204.2399 |
Conversation state undefined |
| M204.0365 |
Argument too long |
M204.1358 |
Open failed for ddName |
M204.2400 |
Ipcd buffer pointer is zero |
| M204.0366 |
LOGCTL or LOGIN command being processed, try again |
M204.1359 |
Unable to allocate sufficient storage to open object |
M204.2401 |
Ipcd session pointer is zero |
| M204.0367 |
Enter table key or return |
M204.1360 |
NOTERM too large; actual number of token threads in use is numOfThreads |
M204.2402 |
Failed to connect with TCP/IP server=token |
| M204.0368 |
New key rejected |
M204.1361 |
ddName DD statement currently in use |
M204.2403 |
Global label token does not reference a record set |
| M204.0369 |
Password table not in core |
M204.1362 |
sysnnn is an invalid logical unit |
M204.2404 |
Soft restart of user secondary to Horizon PST restart |
| M204.0370 |
Table in use, try again |
M204.1363 |
object is currently in use |
M204.2405 |
Declare token not allowed in IFAM |
| M204.0371 |
Invalid LOGCTL syntax |
M204.1364 |
Retryable STXIT AB trapped abendCode |
M204.2406 |
Only string variables allowed in IFAM |
| M204.0372 |
Entry already exists |
M204.1365 |
STXIT AB trapped abendCode |
M204.2407 |
Remote location name expected |
| M204.0373 |
Entry not deleted |
M204.1366 |
Retryable STXIT AB trapped abendCode |
M204.2408 |
File or group keyword expected |
| M204.0374 |
prompt |
M204.1367 |
Retryable STXIT AB trapped abendCode |
M204.2409 |
File or group name expected |
| M204.0375 |
Entry not added/changed |
M204.1368 |
Insufficient real storage to perform PFIX |
M204.2410 |
Keyword At expected |
| M204.0376 |
Parameters accepted |
M204.1369 |
PFREE issued for storage which was not page fixed |
M204.2411 |
Specified file or group does not exist |
| M204.0377 |
Insufficient table space to process request |
M204.1370 |
Authorization required for parmName |
M204.2412 |
ENABLE/DISABLE command complete |
| M204.0378 |
Specified entry not found |
M204.1371 |
Insufficient main storage for operator message |
M204.2413 |
token invalid outside of On unit |
| M204.0379 |
Enter terminal list, all, none, add, del, or return |
M204.1372 |
TIME=1440 may not be specified with Timer SVC |
M204.2414 |
DBCS values cannot be truncated or padded on the left |
| M204.0380 |
Invalid syntax for terminal list, all assumed |
M204.1373 |
Retryable STAE trapped abendcode |
M204.2415 |
REGENERATE backed out uncommitted transactions for file fileName due to roll back only discontinuity |
| M204.0381 |
Expected address or offset |
M204.1374 |
STAE trapped abendCode |
M204.2416 |
Pure DBCS values cannot be padded on the right |
| M204.0382 |
Expected file name |
M204.1375 |
Retryable STAE trapped abendCode |
M204.2417 |
Empty RESTART stream assumed in first pass |
| M204.0383 |
Invalid or missing page number |
M204.1376 |
Retryable STAE trapped abendCode |
M204.2418 |
File token disabled for remote open |
| M204.0384 |
Expected offset |
M204.1377 |
Vs only option ignored - token |
M204.2419 |
Communications error: token disabled |
| M204.0385 |
Invalid Model 204 program or table name |
M204.1378 |
Authorization under APF required for feature |
M204.2420 |
User scheduled for start |
| M204.0386 |
Program not linked in |
M204.1379 |
Model 204 SNAP failed |
M204.2421 |
File regenerated over missing journals |
| M204.0387 |
*ZAP invalid syntax |
M204.1380 |
Invalid NOTERM or POLLNO value |
M204.2422 |
Roll forward did not get the same record number for file fileName old recno: token new recno: token2 |
| M204.0388 |
File not open |
M204.1381 |
phrase phrase hexData |
M204.2423 |
Type token RF entry from update unit token2 to file fileName token3token4 was not reapplied |
| M204.0389 |
excType exception occurred at addr modName+offset |
M204.1382 |
CHUNK size number used: flags=x"hexValue", low=hexValue2, high=hexValue3 |
M204.2424 |
Integrity clause missing |
| M204.0390 |
excType exception occurred at addr modName+offset |
M204.1383 |
X3270CHK error for terminal token; return code = x"hexValue" |
M204.2425 |
Record: token transformed to: token2 in token3 |
| M204.0391 |
SNAPID = number |
M204.1384 |
X3270OUT error for terminal token; return code = x"hexValue" |
M204.2426 |
DK token file=token2 page=hexValue dbcd=hexValue2 buf=hexValue3 from=hexValue4,hexValue5 |
| M204.0392 |
Invalid display option: option |
M204.1385 |
X3270IN error for terminal token; return code = x"hexValue" |
M204.2427 |
DKBM trace: token file=token2 page=hexValue caller=hexValue2,hexValue3 |
| M204.0393 |
Specified checkpoint not found in RESTART stream |
M204.1386 |
Error invoking subsystem through the AUTOSYS parameter |
M204.2428 |
CCAPRQ dataset too small |
| M204.0394 |
File not open: filename |
M204.1387 |
ALLOCATE failed; ddName=ddName, DSN=dsname could not be located |
M204.2429 |
Command requires administrator privileges |
| M204.0395 |
Dynamic allocation failed |
M204.1388 |
CHUNK size exceeds maximum of token |
M204.2430 |
CREATEPQ command rejected |
| M204.0396 |
Invalid DISPLAY FIELD option |
M204.1389 |
Mismatch between user image and internal image |
M204.2431 |
CCAPRQ open failed |
| M204.0397 |
Must specify name list or "all" |
M204.1390 |
Permanent terminal I/O error - token |
M204.2432 |
Print request token token2 queued for token3, token4 lines |
| M204.0398 |
Fatal I/O error on CCARF in pass 2 of roll forward |
M204.1391 |
File argument isn't compatible with previous call |
M204.2433 |
CCAPRQ required, but not present |
| M204.0399 |
Record description unavailable for filename |
M204.1392 |
Soft restart of user due to token |
M204.2434 |
Incorrect define print queue syntax, command rejected |
| M204.0400 |
Unable to allocate sufficient storage to perform concatenation on datasetName data set |
M204.1393 |
CHUNK clause not of format "CHUNK chunkSize FOR chunkTargetFieldName" |
M204.2435 |
Print queue facility not active |
| M204.0401 |
Non-positive length detected on journal entry |
M204.1394 |
CHUNK chunkSize value invalid: reason |
M204.2436 |
Print queue token already exists |
| M204.0402 |
No preallocated fields in filename |
M204.1395 |
CHUNK target field invalid type: reason |
M204.2437 |
Print queue definitions busy, try later |
| M204.0403 |
Invalid option list |
M204.1396 |
CHUNK fields must be INVISIBLE ORDERED NUMERIC |
M204.2438 |
Option "token" already specified, command rejected |
| M204.0404 |
Bug .. display record |
M204.1397 |
A CHUNK field was defined, file fileName may no longer be opened with M204 releases prior to V7R5 |
M204.2439 |
Previous options reset by "like" clause |
| M204.0405 |
Invalid DEFINE option: option |
M204.1398 |
Commit of transaction token not confirmed on remote node token2 |
M204.2440 |
Unrecognized define print queue option: "token" |
| M204.0406 |
Redundant specification: fieldAttribute |
M204.1399 |
Same server area defined for server above the bar and non swappable server |
M204.2441 |
Maximum forms name length is four |
| M204.0407 |
Invalid REDEFINE attribute: fieldAttribute value |
M204.1400 |
Server areas ATB require server swapping in memory |
M204.2442 |
Invalid token specification, command rejected |
| M204.0408 |
OCCURS must be between 1 and 255 |
M204.1401 |
Forced logout due to bump |
M204.2443 |
Target of like clause, "token", not found |
| M204.0409 |
LENGTH must be between 1 and 255 |
M204.1402 |
Invalid value for CHUNK target: token='token2'; values must be -999999999999999->999999999999999 |
M204.2444 |
Gmt time service not supported in this environment |
| M204.0410 |
Invalid use of FEW-VALUED or MANY-VALUED |
M204.1403 |
Increase SERVGSZ to at least token for required ATB server areas |
M204.2445 |
Omnireplicator token |
| M204.0411 |
Conflicting attributes: fieldAttributes |
M204.1404 |
Failed to open token |
M204.2446 |
DEBUGUL parm must be set before subsystem is started |
| M204.0412 |
Record security override required |
M204.1405 |
Unknown journal entry |
M204.2447 |
Komm must be page fixed to use PCTIMER |
| M204.0413 |
FEW-VALUED field rejected because FVFPG=0 |
M204.1406 |
Missing journal was detected between token and token2 for file token3 |
M204.2448 |
DEBUGUL is set and no DEBUG information can be found for current statement |
| M204.0414 |
Invalid RENAME syntax |
M204.1407 |
token discontinuity occurred at token2 for file fileName |
M204.2449 |
token procedure = token2, line = token3 |
| M204.0415 |
Only VISIBLE or ORDERED fields can be renamed |
M204.1408 |
No updates in token after token2 = token3 of file token4 |
M204.2450 |
Testing |
| M204.0416 |
New name already exists |
M204.1409 |
Missing stopping point for file token |
M204.2451 |
Bad mapping of SQL column token.token2 to M204 field token3 (datatype mismatch) |
| M204.0417 |
Cannot delete sort/hash key field |
M204.1410 |
REGENERATE command rejected |
M204.2452 |
Index for token field token2 cannot be used in SQL query processing |
| M204.0418 |
Cannot delete record security field |
M204.1411 |
Null lines are not allowed |
M204.2453 |
SQL request may trigger Table B search in file token and the whole file may be locked |
| M204.0419 |
Invalid REDEFINE syntax |
M204.1412 |
token not allowed with ATB servers |
M204.2454 |
A link may not specify an application ID used by a remote that it owns |
| M204.0420 |
MANY-VALUED field rejected because MVFPG=0 |
M204.1413 |
Stop time earlier than or same as start time for file token |
M204.2455 |
A remote may not specify an application ID used by the link that owns it |
| M204.0421 |
Dictionary page full, can't extend |
M204.1414 |
Error: sort record > 16meg |
M204.2456 |
Replication field token, not defined in file fileName |
| M204.0422 |
Redefinition successfully undone for fieldName |
M204.1415 |
Expecting a "file" clause |
M204.2457 |
TIME > 18325 specified - TIMESTOP will be ignored |
| M204.0423 |
Range field occurs more than once in record recNum |
M204.1417 |
TTY DD card missing - token |
M204.2458 |
Trace table allocated,size = x"hexValue" bytes |
| M204.0424 |
At record recNum |
M204.1418 |
Line error during open |
M204.2459 |
Trace output will go to token |
| M204.0425 |
DP parameter must be positive |
M204.1419 |
Unexpected I/O return code |
M204.2460 |
Global token context does not match global definition |
| M204.0426 |
Wrong page read -- Found: fileName, x'hexValue' Expected: fileName, x'hexValue2' |
M204.1420 |
User deactivated |
M204.2461 |
Continue is only valid in an On unit invoked from a For loop processing a scattered group |
| M204.0427 |
Insufficient getvis storage to locate the label for fileName |
M204.1421 |
Too many I/O errors |
M204.2462 |
Invalid token specified: token2 |
| M204.0428 |
Data set datasetName resides on DOS device type devType which is not currently supported |
M204.1422 |
Forced logout due to inactive thread timeout |
M204.2463 |
Command token is an alias of token2, resetting it also |
| M204.0429 |
# of private buffers required number GT # allocated for current M204 session: number |
M204.1423 |
Hardware error, re-enter |
M204.2464 |
Warning - RCL received out of sequence request |
| M204.0430 |
Subsystem subsysName started |
M204.1424 |
FLOD L statement nested too deeply |
M204.2465 |
Invalid value 'token' for the token2 parameter |
| M204.0431 |
Subsystem subsysName stopped |
M204.1425 |
2741 DD card missing - token |
M204.2466 |
The token parameter requires that the token2 parameter be specified |
| M204.0432 |
Unable to login user for subsystem subsysName |
M204.1426 |
Invalid "FROM" clause |
M204.2467 |
Operator rejected future date verification |
| M204.0433 |
No procedures selected for subsystem subsysName |
M204.1427 |
Invalid stopping point clause |
M204.2468 |
SYSDATE/SYSTIME parameter is not within range of tod clock value |
| M204.0434 |
buffType set to number |
M204.1428 |
Missing an "OF" clause |
M204.2469 |
SYSDATE/SYSTIME parameter cannot be set to value prior to current system date/time |
| M204.0435 |
Waiting for a buffer |
M204.1429 |
Failed to allocate token |
M204.2470 |
Please reply "y" or "n" |
| M204.0436 |
Unable to allocate PD for subsystem subsysName |
M204.1430 |
Failed to open file token |
M204.2471 |
Length of token parameter value is too large |
| M204.0437 |
Bug .. APSY PD empty for subsystem subsysName |
M204.1431 |
Error during the restore step |
M204.2472 |
File fileName was last updated in the future and has failed the future date check; current date: token - date of file: token2 |
| M204.0438 |
Unable to run subsystem subsysName initialization procedure - procName |
M204.1432 |
Process processName, lost session, SENSE CODE X'hexValue' |
M204.2473 |
File fileName was last updated in the future and has failed the future date check; current date: token - date of file: token2 |
| M204.0439 |
Page being illegally modified |
M204.1433 |
token: token2 |
M204.2474 |
token bad global variable: token2 token3 token4 hexValue hexValue2 |
| M204.0440 |
File fileName disk update [completed|aborted] |
M204.1434 |
Transfer failed, REMOTEID is unavailable to VTAM |
M204.2475 |
Display of procedure would fill CCATEMP - command rejected |
| M204.0441 |
CCATEMP full: [operation|pooltype] |
M204.1435 |
Error during regenerate, REGENERATE is cancelled, RF entry number token |
M204.2476 |
The following gds variable is not known to remote ID token: hexValue |
| M204.0442 |
Unable to run subsystem subsysName login procedure - GTBL full, LGTBL=value |
M204.1436 |
Stopped processing file token |
M204.2477 |
A map error was reported by the remote LU but no map was in use: remoteid=token process=token2 |
| M204.0443 |
Table letter full in file fileName |
M204.1437 |
REGENERATE is now complete |
M204.2478 |
'token' rejected, would overwrite currently active proc |
| M204.0444 |
Subsystem must be stopped for test option |
M204.1438 |
Incorrect target clause, should be CHECKPOINT or UPDATE |
M204.2479 |
The following error log was received from REMOTEID token: token2 |
| M204.0445 |
Not enough chunks in Table D in file fileName |
M204.1439 |
Invalid stopping point date or time: token |
M204.2480 |
MODENAME unspecified by token and will default |
| M204.0446 |
subsysName temporarily disabled |
M204.1440 |
Expected byte count |
M204.2481 |
Login token conflicts with that specified by token2 |
| M204.0447 |
Table D inconsistency in file fileName |
M204.1441 |
Process processName, link failed, SENSE CODE X'hexValue' |
M204.2482 |
MODENAME SNASVCMG is reserved for internal use |
| M204.0448 |
Subsystem test in progress, command rejected |
M204.1442 |
Cannot enter data mode from data mode |
M204.2483 |
token is not a valid token2 name |
| M204.0449 |
Invalid argument to $chktag or $chkmod |
M204.1444 |
OUTLPP too small for backpaging |
M204.2484 |
On token operation, image token2 not active |
| M204.0450 |
Bug .. DKFLSHP flushing file fileName with pages on dirty chain |
M204.1445 |
token was previously defined/allocated |
M204.2485 |
token token2 token3, value not valid during evaluation |
| M204.0451 |
DKFUB .. page was being modified in file fileName |
M204.1446 |
Outboard formatting halted, maximum error count exceeded |
M204.2486 |
token: Table D full. Page allocated from Table D reserve area |
| M204.0452 |
TTBL full, LTTBL=value |
M204.1447 |
Outboard formatting halted, screen request not current |
M204.2487 |
Data mover (M204XDM) is not active |
| M204.0453 |
No DD card for file fileName |
M204.1448 |
Outboard formatting halted, screen error - x'hexValue' |
M204.2488 |
token restart of user after EOJ - attempted file update blocked |
| M204.0454 |
Unable to open file dataset ddName codeType code literal userCode |
M204.1449 |
Error while processing CCASNAPsnapInfo |
M204.2489 |
IODEV parameter expected |
| M204.0455 |
Insufficient SPCORE |
M204.1450 |
Unexpected outboard formatting command x'hexValue', outboard formatting halted |
M204.2490 |
Illegal assignment to static %variable |
| M204.0456 |
Illegal PAGESZ parameter, file: fileName |
M204.1451 |
Terminal not outboard formatting compatible, outboard formatting halted |
M204.2491 |
Static %variables must have the Initial attribute |
| M204.0457 |
Unit type incompatible with page size, file: fileName |
M204.1452 |
Unable to allocate sufficient storage for VSAM parameter list |
M204.2492 |
Invalid variable type for Initial attribute |
| M204.0458 |
Bug .. dead subtask |
M204.1453 |
RESTART recovery is running |
M204.2493 |
Variable too small for Initial value |
| M204.0459 |
Resource locking table full. Subsystem subsysName needs number entries |
M204.1454 |
System manager has restricted use of this command |
M204.2494 |
token updating a shared page |
| M204.0460 |
SNAPLIM exceeded, snap not generated |
M204.1455 |
Recovery of token requested, but file is unavailable |
M204.2495 |
token missing token2 $function argument |
| M204.0461 |
Wrong page write attempt on file fileName |
M204.1456 |
Open failed for VSAM dataset token, reason code x'hexValue' |
M204.2496 |
Cleanx: invalid SVAR VTYPE |
| M204.0462 |
Trouble with disk I/O on file fileName |
M204.1457 |
Unable to scan list of subsystem names |
M204.2497 |
Cleanx: loop in SVAR chain |
| M204.0463 |
Trouble with disk I/O |
M204.1458 |
LRECL must be at least token for CCAAUDIT |
M204.2498 |
Cleanx: invalid SVAR chain pointer |
| M204.0464 |
Possible incorrect DD statement |
M204.1459 |
Insufficient Table D space to define ordered field |
M204.2499 |
Data conversion error for value set in file fileName |
| M204.0465 |
I/O error formatting extent |
M204.1460 |
Access to file token parameters not authorized |
M204.2500 |
SQL error token: token2 |
| M204.0466 |
Login violation by userid userID |
M204.1461 |
Access to file token parameter token2 not authorized |
M204.2501 |
Release incompatability |
| M204.0467 |
Subsystem initialization procedure: procName |
M204.1462 |
Access to file token parameter token2 not authorized |
M204.2502 |
token error, DSNAME = token2, return code = token3, reason code = token4 |
| M204.0468 |
Compilation not saved - reason token |
M204.1463 |
Invalid parameter: token |
M204.2503 |
IBM system interface macro token abended, abend code = hexValue, reason code = hexValue2 |
| M204.0469 |
One subsystem (subsysName1) cannot invoke another (subsysName2) |
M204.1464 |
token has already been specified |
M204.2504 |
token user=token2 comp_code=token3 rsn_code=token4 qm=token5 q=token6 |
| M204.0470 |
Error opening file fileName |
M204.1465 |
Name expected |
M204.2505 |
MQOPEN ext_qm=token ext_q=token2 |
| M204.0471 |
Invalid EOD option, text, ON assumed |
M204.1466 |
Invalid name: token |
M204.2506 |
token user=token2 comp_code=token3 rsn_code=token4 qm=token5 ext_qm=token6 task=hexValue |
| M204.0472 |
subsysName not available |
M204.1467 |
'with' or 'like' expected |
M204.2507 |
token token2 |
| M204.0473 |
Unable to initialize subsysName |
M204.1468 |
'with' expected |
M204.2508 |
hexValue |
| M204.0474 |
Disconnected from subsysName |
M204.1469 |
token |
M204.2509 |
token hexValue |
| M204.0475 |
Close failed for file fileName |
M204.1470 |
Illegal compilation name |
M204.2510 |
Missing or incomplete CCAIN file |
| M204.0476 |
DP * only valid with string |
M204.1471 |
token is required for this command |
M204.2511 |
token token2 token3 token4 token5 |
| M204.0477 |
File fileName was restored |
M204.1472 |
One of the following is required for this command: |
M204.2512 |
Roll back will use the following dataset: token |
| M204.0478 |
RACF message display limit reached; not all messages are displayed |
M204.1473 |
token is required when token2 is specified |
M204.2513 |
Non-ORDERED field for Value In clause |
| M204.0479 |
Process group not found: processgrpName |
M204.1474 |
The name of a ring member cannot match the offload name |
M204.2514 |
Remote Value In clause not supported |
| M204.0480 |
Invalid backpage request: backPage |
M204.1475 |
The offload name cannot match the streamname |
M204.2515 |
token data set is invalid for token2 |
| M204.0481 |
Procedure procName in subsysName could not be made resident; increase RESPAGE or RESSIZE |
M204.1476 |
The name of a ring member cannot match the control name |
M204.2516 |
MQ/204 option error: token require token2 |
| M204.0490 |
File fileName was restored |
M204.1477 |
The control name cannot match the streamname |
M204.2517 |
More than 10 images specified |
| M204.0493 |
$unbin argument not 2 or 4 characters |
M204.1478 |
The control name cannot match the offload name |
M204.2518 |
Fill character is invalid: it must have a value less than 256 (X'FF') |
| M204.0494 |
FLOAT LENGTH must be 4, 8 or 16 |
M204.1479 |
The name of a member cannot match the stream name |
M204.2519 |
User request interrupted by EOJ |
| M204.0495 |
Screen option requires terminal option within a procedure |
M204.1480 |
Duplicate member name - token |
M204.2520 |
Illegal use of screen item name variable |
| M204.0496 |
Screen option requires a full screen terminal |
M204.1481 |
The scope option should not be specified and will be discontinued in the future |
M204.2521 |
Queue manager: token not found |
| M204.0497 |
SNAPID = number |
M204.1482 |
Block ended already |
M204.2522 |
Message specification is invalid |
| M204.0498 |
Transaction backout files must be updated without accessing non-TBO files |
M204.1483 |
Not enough Table D space to store procedure |
M204.2523 |
The value of token cannot be token2 than token3 |
| M204.0499 |
File not freed: fileName |
M204.1484 |
Misplaced End statement |
M204.2524 |
token is an invalid token2 |
| M204.0500 |
File fileName: restoring from DUMP of date/time |
M204.1485 |
Block End statement cannot be numbered |
M204.2525 |
None may not be specified with other keywords on the Report option |
| M204.0501 |
MODEL parameter invalid: number |
M204.1486 |
Unable to close VSAM dataset token, reason code x'hexValue' |
M204.2526 |
token and token2 are mutually exclusive options |
| M204.0509 |
No action taken by FREE command; ddName not allocated |
M204.1487 |
Possible I/O error detected for VSAM dataset token |
M204.2527 |
token has already been specified |
| M204.0510 |
FREE command successful; ddName freed |
M204.1488 |
Not enough temporary space to store procedure |
M204.2528 |
token is an invalid option |
| M204.0513 |
token |
M204.1489 |
Not enough file space to continue procedure definition - file fileName |
M204.2529 |
Invalid run-time options variable |
| M204.0517 |
VTAM input exception, user is restarted |
M204.1490 |
Invalid AUTHCTL syntax |
M204.2530 |
Reserved for MQ/204 use |
| M204.0524 |
Maximum number (token) of token2 exceeded |
M204.1491 |
$usrpriv argument 2 must specify 'log' or 'nolog' |
M204.2531 |
MQ/204 EVAL debug: string |
| M204.0525 |
Warning: can't edit into procedure |
M204.1492 |
Link token is already open or being closed |
M204.2532 |
MQ/204 EVAL debug end |
| M204.0526 |
Editing into procedure |
M204.1493 |
Stop processgroup token in progress |
M204.2533 |
MQMXTASK less than MQINTASK; MQMXTASK reset |
| M204.0527 |
Rest of line ignored, invalid operation = c |
M204.1494 |
Link token not open or close/stop link in progress |
M204.2534 |
Insufficient storage to allocate MQUSERD |
| M204.0528 |
Rest of line ignored. Cancelled operation = c |
M204.1495 |
Maximum token conversations exceeded for processgroup token2 |
M204.2535 |
MQ/204 disabled (MQINTASK is 0) |
| M204.0529 |
Not found; will ignore rest of line |
M204.1496 |
No session blocks available for link token |
M204.2536 |
MQ/204 operations not allowed during recovery |
| M204.0530 |
Procedure name too long, rest of line ignored |
M204.1497 |
Remote specification conflicts with open type |
M204.2537 |
Subtask hexValue abended with abcode hexValue2 and rsn code hexValue3 |
| M204.0531 |
Procedure name syntax error, rest of line ignored |
M204.1498 |
Two processgroups using different links point to the same REMOTEID and SESPARMS |
M204.2538 |
Subtask hexValue terminated prematurely |
| M204.0532 |
Invalid previous request number |
M204.1499 |
Process token already open |
M204.2539 |
Command invalid when MQINTASK is 0 |
| M204.0533 |
Editing space exhausted -- DKBL |
M204.1500 |
token |
M204.2540 |
Queue manager name required |
| M204.0534 |
Nested iteration not allowed |
M204.1501 |
token system not operational |
M204.2541 |
Queue manager token is not defined |
| M204.0535 |
Iteration string exceeds 256 characters |
M204.1502 |
Interface delete is disabled |
M204.2542 |
No MQ/204 subtasks available |
| M204.0536 |
Skipping to next ')' |
M204.1503 |
No external authorizer is running |
M204.2543 |
Connection to queue manager token failed, reason code hexValue |
| M204.0537 |
Positive iteration count required, count = n |
M204.1504 |
token interface is disabled |
M204.2544 |
Unable to start queue manager |
| M204.0539 |
Can't edit into procedure |
M204.1505 |
token clause required |
M204.2545 |
Queue manager token has not been started |
| M204.0540 |
Bug .. edit, enq chain |
M204.1506 |
token hexValue |
M204.2546 |
Soft restart of user due to bump while in extended quiesce |
| M204.0541 |
Procedure is in use: procedure |
M204.1507 |
CMS VTAM interface SATTACH failed |
M204.2547 |
ENQCTL proceeding with jobname=token |
| M204.0542 |
Edit complete - command |
M204.1508 |
userID is not authorized to use Model 204 |
M204.2548 |
ENQCTL proceeding with jobname=token |
| M204.0543 |
Warning: procedure can't COPY into itself; procName |
M204.1509 |
Account not authorized |
M204.2549 |
token command illegal from within a subsystem (token2) |
| M204.0544 |
Ignoring 256 characters. Delimiter=c |
M204.1510 |
VTAM storage shortage detected during user transfer |
M204.2550 |
More than token extents specified, file: token2 |
| M204.0545 |
Space not allowed as delimiter |
M204.1511 |
Transfer failed, invalid REMOTEID defined for VTAM transfer |
M204.2551 |
token is invalid for file: token2 |
| M204.0546 |
Procedure not defined |
M204.1512 |
Remote VTAM application rejected the transfer |
M204.2552 |
IGCLM244 version 71D or higher is required |
| M204.0547 |
Procedure line too long |
M204.1513 |
Transfer failed, Model 204 is not authorized for VTAM transfer |
M204.2553 |
ECMSUBS less than ECISUBS; ECMSUBS reset |
| M204.0548 |
token - cannot modify procedure dictionary |
M204.1514 |
Transfer failed, invalid data area or data length |
M204.2554 |
PROTOCOL=PRX1 is obsolete: defaulting to PROTOCOL=IP |
| M204.0549 |
Cannot define new procedure procedure |
M204.1515 |
Transfer failed, REMOTEID equals VTAMNAME |
M204.2555 |
ECF subtask type=hexValue ECTASK=hexValue2 TCB=hexValue3 initialized |
| M204.0550 |
Editing space exhausted -- QTBL, LQTBL=value |
M204.1516 |
VTAM transfer failed, clsdst=pass failure, X0,FDBK2=x'hexValue',x'hexValue2' |
M204.2556 |
Insufficient storage to allocate token |
| M204.0551 |
Request too long -- STBL, LSTBL=value |
M204.1517 |
Job submission is not authorized |
M204.2557 |
token token2 token3token4 token5hexValue token6hexValue2 token7hexValue3 |
| M204.0552 |
Variable too small for result |
M204.1518 |
Userid token is currently logged on |
M204.2558 |
ECF function name=value name=value |
| M204.0553 |
Subscript range error for token |
M204.1519 |
Invalid token call from interprocess IODEV |
M204.2559 |
token can be reset only on user 0 or the first IODEV=7 line: this value is ignored |
| M204.0554 |
Divide by zero |
M204.1520 |
Command requires token privilege |
M204.2560 |
ECF subtask ECTASK=hexValue TCB=hexValue2 (module=token) action due to cause |
| M204.0555 |
Extra numeric field ignored in recnum=token, field=token2 |
M204.1521 |
token does not exist or requested access not authorized |
M204.2561 |
ECF token module=token2 completion=token3 reason=token4 return=token5 ECTASK=hexValue TCB=hexValue2 |
| M204.0556 |
Extra numeric field ignored in recnum=token, field=token2 |
M204.1522 |
Roll forward stream missing or cannot be opened, run terminated |
M204.2562 |
ECF operation module=modName ddName=ddName addr=addr length=len EPA=addr info |
| M204.0557 |
File Records Under requires either an INVISIBLE,KEY or INVISIBLE,ORDERED field: field = fieldName |
M204.1523 |
Eof reached in first pass of token stream after seq# token2 of token3 |
M204.2563 |
Module=token returned more than token2 bytes |
| M204.0558 |
$setl not allowed for full screen device |
M204.1524 |
Unable to start second pass on roll back, RESTART failed |
M204.2564 |
File fileName has already been recovered using this CCARF |
| M204.0559 |
Updating sort key: field = fieldname |
M204.1525 |
No inbound threads available |
M204.2565 |
token=token2, restart=token3 |
| M204.0560 |
INVISIBLE field: field = fieldname |
M204.1526 |
Checkpoint -- insufficient storage for checkpoint work area |
M204.2566 |
LINK=token, LOCALID=token2, PGROUP=token3, PROCESS=token4, RMTID=token5 literal mode |
| M204.0561 |
Value non-numerical: value = value |
M204.1527 |
fileOrGroupName file option prohibits delete records |
M204.2567 |
Regs= hexValue hexValue2 hexValue3 hexValue4 hexValue5 hexValue6 hexValue7 hexValue8 hexValue9 hexValue10 hexValue11 hexValue12 hexValue13 hexValue14 hexValue15 hexValue16 |
| M204.0562 |
Request too long - tablevalue |
M204.1528 |
Where/With clause is invalid against sorted set |
M204.2568 |
Entry token , PDRT token2 , 2nd PDRT token3 hexValue hexValue2 hexValue3 hexValue4 hexValue5 hexValue6 hexValue7 hexValue8 |
| M204.0563 |
Arithmetic overflow |
M204.1529 |
Maximum deferred update files already open |
M204.2569 |
Seslock token already token2 |
| M204.0564 |
Connection to user lost (phone was hung up) |
M204.1530 |
token statement contains options that are incompatible with this link type |
M204.2570 |
TCP/IP cleanup deferred for socket token user token2 - token3 |
| M204.0565 |
Can't process on token - VTBL full, LVTBL=value |
M204.1531 |
Block began with different label |
M204.2571 |
TCP/IP cleanup deferred for socket token user token2 - local sessterm has been previously scheduled |
| M204.0566 |
Quadruple missing |
M204.1532 |
End token expected, not End token2 |
M204.2572 |
TCP/IP cleanup failed for socket token user token2 - session block could not be located |
| M204.0567 |
Insufficient CCATEMP space to process command |
M204.1533 |
Statement numbers prohibited |
M204.2573 |
token user=token2 comp_code=token3 rsn_code=token4 qm=token5 q=token6 ext_qm=token7 ext_q=token8 local dynamic queue token9 |
| M204.0569 |
File filename, Find: Table B records to be searched = number |
M204.1534 |
Statement labels prohibited |
M204.2574 |
This operation is not supported from user zero |
| M204.0570 |
NON-FRV, NON-ORDERED field: field = token |
M204.1535 |
Label reference needed |
M204.2575 |
RENAME rejected, token token2 token3 |
| M204.0571 |
Point$ argument syntax error |
M204.1536 |
IUCV connect to GCS machine token failed; return code = token2 |
M204.2576 |
token RENAMEd from token2 to token3 |
| M204.0572 |
New value null, pad, or too long for token |
M204.1537 |
token IUCV token2 failed; return code = token3 |
M204.2577 |
Subsystem name exceeds 10 characters in length |
| M204.0573 |
Value(s) too long--STBL, LSTBL=value |
M204.1538 |
VT204 program not available on token |
M204.2578 |
Socket token link token2 closing |
| M204.0574 |
Request too long -- VTBL, LVTBL=value |
M204.1539 |
IUCV message completed abnormally, ipaudit = hexValue |
M204.2579 |
Socket token link token2 closed |
| M204.0577 |
QTBL full, LQTBL=value -- direct search |
M204.1540 |
LRESERVE must be between 0 and 99 |
M204.2580 |
Error creating dataspace token - token2 failed R15=hexValue R0=hexValue2 |
| M204.0578 |
Too many call levels - VTBL, LVTBL=value |
M204.1541 |
NRESERVE must be between 0 and 99 |
M204.2581 |
APF authorization required for XMEMOPT=2 (IOS Branch Entry) and XMEMOPT=2 required for option |
| M204.0579 |
Cannot return - empty stack |
M204.1542 |
SPLITPCT must be between 1 and 100 |
M204.2582 |
Error creating dataspace token - token2 |
| M204.0580 |
Bug .. SOR |
M204.1543 |
IMMED must be between 0 and 255 |
M204.2583 |
PCBPTTRD not zero following passive socket close |
| M204.0581 |
Waiting for share access to file token |
M204.1544 |
LEVEL must be between 0 and 255 |
M204.2584 |
SOCD not found |
| M204.0582 |
Access to file token prevented by: jobname |
M204.1545 |
Session not established for inbound process token |
M204.2585 |
Close attempted for socket without SESD |
| M204.0583 |
Waiting for exclusive access to file token |
M204.1546 |
You have taken all the available strings, current request denied |
M204.2586 |
Close attempted after API termination |
| M204.0584 |
File is in use: token |
M204.1547 |
Maximum number of data and image clauses exceeded |
M204.2587 |
Socket token was set in the exception FDS for token2 but there is no session block currently associated with this socket |
| M204.0585 |
Shared dasd enq list overlaid for file fileName token |
M204.1548 |
IFFDV |
M204.2588 |
Socket token was set in the read FDS for token2 but there is no session block currently associated with this socket |
| M204.0586 |
ENQCTL not allowed during roll back |
M204.1549 |
IFFDVC |
M204.2589 |
Socket token was set in the write FDS for token2 but there is no session block currently associated with this socket |
| M204.0587 |
ENQCTL invalid argument - token |
M204.1550 |
IFFDVE |
M204.2590 |
SESD for socket token link token2 unexpectedly deallocated before socket data could be read |
| M204.0588 |
systemId enqType jobname stepname date time |
M204.1551 |
IFGETV |
M204.2591 |
SESD for socket token link token2 unexpectedly deallocated after socket data was read |
| M204.0589 |
Command requires z/OS or CMS environment |
M204.1552 |
IFGTVC |
M204.2592 |
Passive socket for link token has been closed |
| M204.0590 |
Share-dasd enqueueing inactivated, FPL of file token is on a read-only device |
M204.1553 |
IFGTVE |
M204.2593 |
SESD for socket token was unexpectedly reallocated |
| M204.0591 |
Share dasd enq list full for file fileName |
M204.1554 |
IFSRTV |
M204.2594 |
Socket token received a zero-length record from remote token2 port token3 |
| M204.0592 |
Invalid string type specification |
M204.1555 |
IFSTVC |
M204.2595 |
Passive socket for link token has been closed temporarily due to local resource shortage |
| M204.0593 |
Invalid file name: token |
M204.1556 |
IFSTVE |
M204.2596 |
Passive socket for link token has been reopened: local resource shortage abated |
| M204.0594 |
DP is invalid with pure DBCS |
M204.1557 |
IFFDV errors |
M204.2597 |
token command invalid from an RCL thread |
| M204.0595 |
Undeclared variables are not permitted with the Undefined option |
M204.1558 |
IFDEQ |
M204.2598 |
Socket token moved to deferred clnup queue for link token2 |
| M204.0597 |
In Order clause is invalid against sorted set |
M204.1559 |
Invalid IFGETV spec syntax |
M204.2599 |
TCP/IP PC call handler "SNMPGPCN" not linked in |
| M204.0598 |
FREE ddName failed - reason |
M204.1560 |
Invalid sort option: token |
M204.2600 |
Sessinit rejected: socket token remoteid=token2 port=token3 link=token4 |
| M204.0599 |
There is no current default string length |
M204.1561 |
IFDALL |
M204.2601 |
ECF module name not token |
| M204.0602 |
File is in use |
M204.1562 |
IFDEQL |
M204.2602 |
Late data received after timeout or bump -- rh=hexValue, ru=hexValue2 |
| M204.0603 |
No default file/group |
M204.1563 |
IFENQ |
M204.2603 |
Socket accept request for link token could not be accommodated: no session block available |
| M204.0604 |
Closing default, user must establish new default |
M204.1564 |
IFENQL |
M204.2604 |
FLOD record definition exceeds record length |
| M204.0606 |
File is member of open temp group - not token |
M204.1565 |
IFFLS |
M204.2605 |
CHKPOINT too small for roll forward - token blocks required; token2 found |
| M204.0607 |
Active procedure file not closed - file fileName |
M204.1566 |
Pad must be a single quoted character |
M204.2606 |
Only token token2 licensed, run terminated |
| M204.0608 |
File closed: token |
M204.1567 |
Duplicate pad specification |
M204.2607 |
CPQZACTN and CPQZSECS are corequisite parameters |
| M204.0609 |
File fileName must be transformed using a release of Model 204 prior to 8.0 |
M204.1568 |
Image item variable required |
M204.2608 |
CPQZACTN value is invalid or more than one mutually exclusive value set |
| M204.0610 |
File directory is full |
M204.1569 |
Referenced item not in active image |
M204.2609 |
Posting not allowed for named ECBs |
| M204.0611 |
All file DCB's are in use |
M204.1570 |
message cpuID hexValue |
M204.2610 |
token |
| M204.0612 |
No opens allowed during roll back |
M204.1571 |
message |
M204.2611 |
CHECKPOINT token command successful |
| M204.0613 |
Group not found; open rejected |
M204.1572 |
token token2 not open |
M204.2612 |
CHECKPOINT command unsuccessful - token |
| M204.0614 |
Argument missing |
M204.1573 |
File token not positioned before Read Next |
M204.2613 |
token |
| M204.0615 |
File fileName is being recovered |
M204.1574 |
End of file in file token |
M204.2614 |
Extended quiesce in progress - updating suspended, please wait |
| M204.0616 |
Tag must refer to input item: token |
M204.1575 |
Record not found in file token |
M204.2615 |
token |
| M204.0617 |
Checkpoint required to update file fileName |
M204.1576 |
Keyed read attempted on sequential file token |
M204.2616 |
token command ignored - system in extended quiesce |
| M204.0618 |
Roll forward logging required to update file fileName |
M204.1577 |
Error reading token token2 |
M204.2617 |
Extended quiesce ring journal offload failed |
| M204.0619 |
Group file opened: file fileName |
M204.1578 |
Record not found by position in token |
M204.2618 |
User entered a nonswappable SWAIT during extended quiesce processing - KJWHAT= x'hexValue' |
| M204.0620 |
File fileName opened token |
M204.1579 |
No position token to release |
M204.2619 |
token restarted - extended quiesce processing may be affected |
| M204.0621 |
File fileName recoverType to recoverPoint dateTime |
M204.1580 |
Image depending variable not numeric |
M204.2620 |
Subsystem token invalid CCATEMP page count token2 |
| M204.0622 |
Update token of token2 was token3 update token4 file fileName by token5 |
M204.1581 |
Image depending variable negative or exceeds maximum |
M204.2621 |
No file tables DUMP(G)ed |
| M204.0623 |
File fileName may be logically inconsistent |
M204.1582 |
VSAM string unavailable for position |
M204.2622 |
HWM CCATEMP pages used in token = token2, max available = token3 |
| M204.0624 |
File fileName is in deferred update mode |
M204.1583 |
Referenced item has unknown length or location |
M204.2623 |
JCL ddNames not allowed for GDG members; use DEFINE DATASET |
| M204.0625 |
File fileName is full |
M204.1584 |
Occurs must be between 0 and 32767 |
M204.2624 |
Insert not supported for large object fields |
| M204.0626 |
File fileName is physically inconsistent |
M204.1585 |
Length invalid for item type, DP, or BP |
M204.2625 |
User restart due to end-of-screen page pause with open Model 204 file pages |
| M204.0627 |
File fileName is not initialized |
M204.1586 |
Option token duplicates or conflicts with previous options |
M204.2626 |
XMEMSVC must be set to a valid SVC # if either x'02' or x'80' is set in XMEMOPT |
| M204.0628 |
File message not printed - insufficient storage |
M204.1587 |
FSCB full, image too large: LFSCB required = token, bytes available in FSCB = token2 |
M204.2627 |
Fast recovery: beginning journal block token |
| M204.0629 |
FLIO not linked in |
M204.1588 |
Unknown length or location not allowed with align |
M204.2628 |
uuuuuuuuuu aaaaaaaaaa llllll yy mmm dd hh.mm |
| M204.0630 |
token command rejected |
M204.1589 |
Maximum Image length is 32767: LFSCB required = token |
M204.2629 |
ONEPASS disallowed across file recovery |
| M204.0631 |
Maximum number of files open already |
M204.1590 |
Conflicting inbound and outbound parameters |
M204.2630 |
Statement too complicated |
| M204.0633 |
Dataset incorrectly DUMP/RESTORED, file: token |
M204.1591 |
IFUTBL |
M204.2631 |
Too many subroutines |
| M204.0634 |
Trouble with disk I/O, possible incorrect DD card, file="token" |
M204.1592 |
VTBL full, LVTBL=value, sorted output impossible |
M204.2632 |
LQTBL set to max of 16383 for non-UL threads |
| M204.0635 |
Reserved prefix used |
M204.1593 |
CICS printer not available, token |
M204.2633 |
(re)enter new password |
| M204.0636 |
File security violation |
M204.1594 |
Dimension must be 1, 2, or 3 |
M204.2634 |
Your password will expire in token |
| M204.0637 |
No room for record description |
M204.1595 |
token is not an array variable |
M204.2635 |
There have been token unsuccessful login attempts |
| M204.0638 |
Number of slots = token |
M204.1596 |
File token is referenced within this request |
M204.2636 |
User token deleted from password table: token2 |
| M204.0639 |
Slots used = token |
M204.1597 |
Password incorrect for token |
M204.2637 |
Unable to add entry: the maximum have already been added |
| M204.0640 |
Percentage of Table C used = token |
M204.1598 |
Attempt to read past end of file token |
M204.2638 |
Discrepancy: current vs expected journal block token token2 |
| M204.0641 |
File fileName has never been used |
M204.1599 |
Group name blank |
M204.2639 |
Your password has expired |
| M204.0642 |
Invalid TABLEB option |
M204.1600 |
No global name given |
M204.2640 |
Command rejected: another user token password table entry for token2 |
| M204.0643 |
An operand is invalid or missing |
M204.1601 |
CICS printer error, token |
M204.2641 |
A new password must be entered: the current one token |
| M204.0644 |
Invalid operand following first number |
M204.1602 |
CICS printer close failed, token |
M204.2642 |
Your userid has been revoked: excessive failed login attempts |
| M204.0645 |
Page numbers in wrong order |
M204.1603 |
Outboard formatting: too many lines on screen without "new page" statement |
M204.2643 |
Passwords do not match |
| M204.0646 |
File fileName is not a sorted file |
M204.1605 |
At position not valid within an array |
M204.2644 |
Data set token used by CCASTAT DD statement currently in use |
| M204.0647 |
Bug .. TABLEB |
M204.1606 |
Invalid relational operator for key: token |
M204.2645 |
'KEEPDEFS' specified and token |
| M204.0648 |
Too many specified options |
M204.1607 |
"for" clause conflicts with open type |
M204.2646 |
'KEEPDEFS' specified and no field definitions present, 'KEEPDEFS' ignored |
| M204.0649 |
Page number must be positive |
M204.1608 |
"for" clause required |
M204.2647 |
Unable to update active definition, token is no longer active. |
| M204.0650 |
Page number specified is too small |
M204.1609 |
Use of image requires non-zero LFSCB |
M204.2648 |
Buffer or large object reference has token token2 |
| M204.0651 |
Page number specified is too big |
M204.1610 |
Only 4095 images allowed for a single block |
M204.2649 |
CCASTAT is currently in use |
| M204.0652 |
Deferred update ddName must start with "TAPE" |
M204.1611 |
Digits must be between 1 and 15 |
M204.2650 |
Pause time not in range |
| M204.0653 |
Can't open deferred update dataset: ddName |
M204.1612 |
DP must be between 0 and 15 |
M204.2651 |
Not all threads processed for IODEV token |
| M204.0654 |
Insufficient core for deferred update dataset: filename |
M204.1613 |
Bits must be 8, 16, 24, or 32 |
M204.2652 |
token |
| M204.0655 |
Can't reposition deferred update dataset: token |
M204.1614 |
At position must be between 1 and 32767 |
M204.2653 |
Refresh privileges required for subsystem subsysName |
| M204.0656 |
Updates deferred to ddName |
M204.1615 |
Current item is not in the same image as token |
M204.2654 |
Table token does not exist |
| M204.0657 |
Sort error |
M204.1616 |
Image, item, or array name not defined: token |
M204.2655 |
Unable to resume subsystem subsysName |
| M204.0658 |
Trouble with deferred update I/O: token |
M204.1617 |
Current item must be in same array as target of At |
M204.2656 |
Unable to suspend subsystem subsysName |
| M204.0659 |
Can't open TAPEI |
M204.1618 |
BP must be between 0 and 31 |
M204.2657 |
Subsystem subsysName resumed |
| M204.0660 |
Unable to attach sort, rc = number |
M204.1619 |
Len must be positive number or "unknown" |
M204.2658 |
Subsystem subsysName not in suspend state |
| M204.0661 |
Sort work DD card, CCA1WK01, missing |
M204.1620 |
Occurs must be between 1 and 32767 or "unknown" |
M204.2659 |
subsysName set to suspend, remaining users = noOfUsers |
| M204.0662 |
Can't defer updates, FLOD aborted |
M204.1621 |
Depending variable token not defined or not an item |
M204.2660 |
Bug .. roll forward did not put page token on the reuse queue in file fileName |
| M204.0664 |
Can't open SORT5 |
M204.1622 |
"end image" missing |
M204.2661 |
Subsystem subsysName suspended |
| M204.0665 |
Can't open TAPE5 |
M204.1623 |
Image, array, and item names must be unique |
M204.2662 |
File fileName has no Table E pages |
| M204.0667 |
Unable to attach FRV sort, rc = number |
M204.1624 |
Invalid value for Pad or Initial character |
M204.2663 |
Remote files not allowed |
| M204.0668 |
Invalid EDIT option: token |
M204.1625 |
To position must be between start of item and 32767 |
M204.2664 |
Temp groups not allowed for subsystem procedure group |
| M204.0669 |
Server initialization error: $status=token $statusd=token2 |
M204.1626 |
Skip must be between 1 and 32767 |
M204.2665 |
procName refreshed in subsystem subsysName |
| M204.0670 |
File fileName is on a read-only device |
M204.1627 |
Array with depending variable cannot be overlaid |
M204.2666 |
token replaced in token2 token3 |
| M204.0671 |
File token is on a read-only device |
M204.1628 |
Duplicate Occurs clause |
M204.2667 |
EXCPVR not supported under 64 bit; EXCP will be substituted |
| M204.0672 |
File is in deferred update mode |
M204.1629 |
"unknown" not allowed inside an array |
M204.2668 |
token not found in any active subsystem |
| M204.0673 |
Error procedure not defined or cancelled in subsys subsysName - error code: APSYerrorCode |
M204.1630 |
Occurs clause required for array |
M204.2669 |
Procedure token is in use by subsystem subsysName |
| M204.0674 |
Not enough core for sort communications area |
M204.1631 |
Array with depending variable must have known location |
M204.2670 |
Subsystem subsysName is unavailable |
| M204.0675 |
Record description unavailable |
M204.1632 |
Item length must be specified |
M204.2671 |
Parameter token is not supported for files created before version token2 |
| M204.0676 |
token does not have token2 privilege on token3 token4. |
M204.1633 |
Number or variable required, not: token |
M204.2672 |
Refresh in progress for subsystem procedure: token |
| M204.0677 |
Bad line -- ignored |
M204.1634 |
Item must be defined with "Len Unknown" |
M204.2673 |
Command requires an unordered file organization. File fileName |
| M204.0678 |
Duplicate tag -- ignored |
M204.1635 |
Array or item must be defined with "occurs unknown" |
M204.2674 |
Invalid parameter: token |
| M204.0679 |
Implied decimal position invalid |
M204.1636 |
Occurs must be between 0 and 32767 |
M204.2675 |
Invalid value entered for parameter: token |
| M204.0680 |
Nesting level too deep |
M204.1637 |
Length invalid for item type, DP, or BP |
M204.2676 |
Insufficient free space in Table B. File fileName is full. Command COMPACTB ends. |
| M204.0681 |
Too many ENDL's |
M204.1638 |
Name required for array with Occurs Unknown |
M204.2677 |
File fileName: all free pages allowed for compaction have been used. Command COMPACTB ends. |
| M204.0682 |
FLOD compilation errors found |
M204.1639 |
"to" invalid for item with unknown location |
M204.2678 |
Bug .. roll forward did not get the same extension record length for file fileName |
| M204.0683 |
FLOD filename |
M204.1640 |
Invalid Initial value for item type: token |
M204.2679 |
Bug .. roll forward did not get the same extension pointer for file fileName |
| M204.0684 |
No value supplied -- col=0 |
M204.1641 |
Maximum Image length is 32767 |
M204.2680 |
Bug .. roll forward did not get the same CHUNK length for file fileName |
| M204.0685 |
Editing into procName |
M204.1642 |
No active array |
M204.2681 |
Bug .. roll forward did not get the same new record length for file fileName |
| M204.0686 |
Expected SQL evaluation stack exceeded - increase SQLIQBSZ |
M204.1643 |
Item type required |
M204.2682 |
token : variable did not resolve to token2 |
| M204.0687 |
All devices in use |
M204.1644 |
Line ignored after invalid option: token |
M204.2683 |
REFRESH SUBSYSPROC command failed |
| M204.0688 |
Input record number internalRecnum |
M204.1645 |
Image cannot overlay item with subscript or unknown location |
M204.2684 |
Checkpoint configuration conflict - token token2 |
| M204.0689 |
File record number internalRecnum |
M204.1646 |
Name given is not an image |
M204.2685 |
CHKPNTS is open so CPMAX set to 1 |
| M204.0690 |
Null field name -- executing D command |
M204.1647 |
Illegal item used as depending variable |
M204.2686 |
Checkpoint processing will use both CHKPOINT and CHKPNTS |
| M204.0691 |
Branched to missing tag |
M204.1648 |
"to" invalid inside an array |
M204.2687 |
Sub-transaction checkpoint postponed by user token user no token2 on file token3 |
| M204.0692 |
Tag number = labelNumber |
M204.1649 |
All "unknown" data must follow depending arrays and variables |
M204.2688 |
CHKPNTS DD not open; sub-transaction checkpointing not active |
| M204.0693 |
String too long |
M204.1650 |
Openc invalid for external file |
M204.2689 |
Not enough Table E pages |
| M204.0694 |
FLOD finished -- pass count satisfied |
M204.1651 |
Invalid reference to array or skip name: token |
M204.2690 |
token pages would fill Table E in file fileName |
| M204.0695 |
Invalid binary input |
M204.1652 |
Enter a valid procedure name or hit attention to exit |
M204.2691 |
Buffer assignment must reference large object field |
| M204.0696 |
Decimal point position invalid, not inserted |
M204.1653 |
token is a required member of active subsystem(s) |
M204.2692 |
token is highest number of CHKP records |
| M204.0697 |
FLOD finished -- STOP statement |
M204.1654 |
token has been stopped |
M204.2693 |
Source and target lengths must be equal |
| M204.0698 |
FLOD finished -- end of input |
M204.1655 |
All blocks ended, label not found |
M204.2694 |
Object extended too far |
| M204.0699 |
Begin first Z step |
M204.1656 |
Entity name or type token exceeds 8 characters |
M204.2695 |
No buffer available |
| M204.0700 |
End first Z step |
M204.1657 |
"with" expected |
M204.2696 |
Attempt to access data past buffer end |
| M204.0701 |
Begin second Z step |
M204.1658 |
ID required for ROUTER=VM |
M204.2697 |
Start of sub-trans CHKP at: token, token2 |
| M204.0702 |
End second Z step |
M204.1659 |
Invalid entity for USE command |
M204.2698 |
End of sub-trans CHKP at: token, token2 |
| M204.0703 |
FLOD finished -- record count satisfied |
M204.1660 |
ROUTER=token not supported for this operating system |
M204.2699 |
$Lob functions require BLOB/CLOB field |
| M204.0704 |
No record defined -- FLOD |
M204.1661 |
VOLUME must be specified and not 'SCRTCH' when POSITION > 1 |
M204.2700 |
CHECKPOINT command ignored: sub-transaction checkpoint in progress |
| M204.0705 |
Error in record internalRecnum |
M204.1662 |
Invalid At or After position for aligned item |
M204.2701 |
token |
| M204.0706 |
Command requires operation in a virtual machine |
M204.1663 |
I/O error or EOF on first read of CCARF stream |
M204.2702 |
File fileName mismatch between Table token queue length after rebuild and number of pages added to the queue: token2 |
| M204.0707 |
Table B full -- appends |
M204.1664 |
"TO UPDATE" only allowed on first line of REGENerate |
M204.2703 |
Open token failed. File update in progress |
| M204.0708 |
Return code from token was token2 |
M204.1666 |
JECL statement cannot be longer than 71 characters |
M204.2704 |
Buffer reference requires LOB field |
| M204.0709 |
Closing VTAM interface |
M204.1669 |
Image to be token is not active |
M204.2705 |
Compilation syntax required literal large object field, but evaluation found 'token' |
| M204.0710 |
Too many occurrences in recnum=token, field=token2 |
M204.1670 |
token token2 not open for output |
M204.2706 |
Reserve clause invalid on Change statement |
| M204.0711 |
Incompressible value in recnum=token, field=token2 |
M204.1671 |
File token is not open |
M204.2707 |
Table B auto increase parameters are not supported for hash files |
| M204.0712 |
Value too long in recnum=token, field=token2 |
M204.1672 |
Percent variable required |
M204.2708 |
No files updated by transaction token after subtran chkp |
| M204.0713 |
End of line -- rcode |
M204.1673 |
End of line expected, found token |
M204.2709 |
*LOOK CORE x'hexValue' x'hexValue2' |
| M204.0714 |
Bad tag or index number |
M204.1674 |
File name cannot be null |
M204.2710 |
Error token setting TCP/IP SYSID token2 |
| M204.0715 |
Invalid command format |
M204.1675 |
Position not valid for sequential file |
M204.2711 |
token is not a DUMP dataset, cannot RESTORE into token2 |
| M204.0716 |
Invalid userID |
M204.1676 |
Invalid 3270 SBA in input stream: x'hexValue' |
M204.2712 |
token token2 token3 |
| M204.0717 |
Invalid file specification |
M204.1677 |
Prompt/title items must have the "protected" attribute |
M204.2713 |
Insert not supported for large object fields |
| M204.0718 |
Invalid user number specified |
M204.1678 |
CICS terminal required for ROUTER=CICS |
M204.2714 |
ddName specified for both dump ddName and filename |
| M204.0719 |
Up too far |
M204.1679 |
Variable redefinition conflicts with complex subroutine feature |
M204.2715 |
Attempt to access data past end of LOB |
| M204.0720 |
Down too far |
M204.1680 |
Invalid "in range" syntax |
M204.2716 |
Free space is empty |
| M204.0721 |
Case command has over 25 entries |
M204.1681 |
Alphabetically and Numerically illegal with Like, Present |
M204.2717 |
Automatic increase for file fileName Table token is not done due to empty free space |
| M204.0722 |
Repeating range field prohibited |
M204.1682 |
Bug .. Like pattern, string = 'token', pattern = 'token2' |
M204.2718 |
Send statement bytes value less than one |
| M204.0723 |
Function not defined |
M204.1683 |
VMCF message limit exceeded |
M204.2719 |
Open or OpenC token failed. Update statements already compiled, read only privileges insufficient |
| M204.0724 |
Communication error - SENSE = hexValue |
M204.1684 |
Missing right paren in find specs |
M204.2720 |
VIO not allowed with XMEMOPT=2 |
| M204.0725 |
Too many arguments |
M204.1685 |
Subsystem subsysName does not exist |
M204.2721 |
TCP address token already uses port token2 on interface token3 |
| M204.0726 |
Function not linked in |
M204.1686 |
Unable to re-establish connection after VTAM transfer failed, X0, FDBK2=x'hexValue',x'hexValue2' |
M204.2722 |
Group closed: token |
| M204.0727 |
Invalid function syntax |
M204.1687 |
FNV on Ordered For loop was not an ORDERED field: field = fieldName |
M204.2723 |
FOPT=x'10' invalid when DTSFN not specified in run |
| M204.0728 |
Function must be inside For loop |
M204.1688 |
token in pattern 'token2' near character token3 |
M204.2724 |
Parameter "DELETE" is indicated for file fileName with no LPU feature enabled and not a single user run. An exclusive file enqueue will be required. |
| M204.0729 |
Function must be in file context |
M204.1689 |
token in pattern 'token2' near character token3 |
M204.2725 |
File options x'10' and x'02' are incompatible |
| M204.0730 |
String too long |
M204.1690 |
Unmatched parenthesis in pattern token |
M204.2726 |
Previous compaction for file fileName has not finished |
| M204.0731 |
$unfloat argument not 4 or 8 characters |
M204.1691 |
Unmatched parenthesis in pattern token |
M204.2727 |
Can't delete DTS field when FOPT=X'10' is on |
| M204.0732 |
Format error |
M204.1692 |
Ordered retrieval syntax error |
M204.2728 |
Date time stamp field may not be INVISIBLE, UNIQUE, nor have multiple occurrences |
| M204.0733 |
$encrypt parameter not a positive integer |
M204.1693 |
"in order" invalid with sorted set |
M204.2729 |
Date time stamp file may not be opened when DTSFN not specified in run |
| M204.0734 |
Global value is not numeric - $incrg |
M204.1694 |
Null ordered record loop implied |
M204.2730 |
Date time stamp file, but DTSFN not defined in file |
| M204.0735 |
No room for new value of global - $incrg, LGTBL=value |
M204.1695 |
ORDERED fields are not allowed in files created before Release 9.0 |
M204.2731 |
DEBUGOPT specified, but XMEMOPT not set |
| M204.0736 |
Invalid value count |
M204.1696 |
Image not active |
M204.2732 |
File fileName has no Table X defined. Parameter "DELETE" not allowed. |
| M204.0737 |
Undefined %variable |
M204.1697 |
First step in reorganizing the ordered index has completed |
M204.2733 |
DTS option is not allowed for files created before release 6.1 |
| M204.0738 |
Value too long - truncation occurred |
M204.1698 |
File fileName not open for deferred updates to the ordered index |
M204.2734 |
IARV token error - return code=token2, reason code=x'hexValue' |
| M204.0739 |
Too many values given |
M204.1699 |
Redefinition failed, insufficient space to create the ordered index |
M204.2735 |
File fileName has too many records per Table B page to satisfy record limit requirement |
| M204.0740 |
$jobcode argument not in the range 0 to 4095 |
M204.1700 |
UNIQUE fields are not allowed in files created before Release 9.0 |
M204.2736 |
File fileName FOPT=x'10' turned off: date time stamp field undefined |
| M204.0741 |
Invalid access string - string |
M204.1701 |
Non-unique value token found for field token2 in record number token3; conflicts with record number token4 |
M204.2737 |
CHKPOINT dataset must be copied to larger dataset - do not delete and reallocate ! |
| M204.0742 |
Invalid context specification: text |
M204.1702 |
Uniqueness violation detected for token = token2 in file fileName |
M204.2738 |
Command requires file manager privilege for file fileName |
| M204.0743 |
Invalid second argument to $round |
M204.1703 |
Uniqueness violation detected |
M204.2739 |
Parameter token cannot be reset on user 0's parameter line: token2 |
| M204.0744 |
Fortran routines weren't linked in |
M204.1704 |
File Records requires a non-UNIQUE field |
M204.2740 |
Invalid parameter token: token2 support not linked in |
| M204.0745 |
Negative argument to $sqrt, return 0 |
M204.1705 |
File Records requires a non-UNIQUE field |
M204.2741 |
Roll back/roll forward must be run prior to RERUNRB - RESTART cancelled |
| M204.0746 |
Argument 2 to $arctan2 was 0, return 0 |
M204.1706 |
Non-unique value token found for ORDERED field token2 |
M204.2742 |
Bug .. new record number not basic for file fileName |
| M204.0747 |
Argument too big for trig functions, return 0 |
M204.1707 |
Sort/hash key must be first field loaded into new record |
M204.2743 |
Bug .. first record not basic for file fileName |
| M204.0748 |
Argument too big for $ixpi,return 0 |
M204.1708 |
REGENERATE did not perform restore |
M204.2744 |
Bug .. not enough space on page for file fileName |
| M204.0749 |
Invalid arguments to $rxpi or $ixpi, return 0 |
M204.1709 |
token interface is not supported in this operating system |
M204.2745 |
Bug .. extension pointer not zero for file fileName |
| M204.0750 |
Invalid arguments to $rxpr, return 0 |
M204.1710 |
'at' option not supported |
M204.2746 |
XSIZE*XRECPPG may not be 1 nor exceed 536870911 |
| M204.0751 |
Invalid argument to $log or $log10, return 0 |
M204.1711 |
"From" clause required for files created prior to Release 9.0 |
M204.2747 |
Table X not supported under sorted or hashed organization |
| M204.0752 |
Exponent too large for $exp, return 0 |
M204.1712 |
Invalid or undeclared member variable specified |
M204.2748 |
Starting record number is too big |
| M204.0753 |
$sinh or $cosh argument invalid, return 0 |
M204.1713 |
Member memberName not found in groupName |
M204.2749 |
File fileName number of basic records processed: token |
| M204.0754 |
Bad argument to $gamma, return 0 |
M204.1714 |
Cannot store record into groupName, key required in update file fileName |
M204.2750 |
File fileName number of extension records before compaction: token |
| M204.0755 |
Bad argument to $lgamma, return 0 |
M204.1715 |
Cannot store record into groupName, file fileName has no sort/hash key |
M204.2751 |
File fileName number of extension records after compaction: token |
| M204.0756 |
No code tables defined |
M204.1716 |
Cannot store record into groupName, no update file |
M204.2752 |
File fileName number of not processed (locked) records: token |
| M204.0757 |
Invalid code table identifier = token |
M204.1717 |
fileOrGroupName file option prohibits delete records |
M204.2753 |
File fileName number of free pages used: token |
| M204.0758 |
Insufficient storage for message |
M204.1718 |
Frn in group context requires "member" clause |
M204.2754 |
File fileName number of deleted logically-deleted records: token |
| M204.0759 |
Sort work DD card, CCA2WK01, missing |
M204.1719 |
IFSKEY |
M204.2755 |
File fileName unexpected error during physical delete. Compaction ends. |
| M204.0760 |
Sort return codes - sort 1: hexValue, sort 2: hexValue2 |
M204.1720 |
IFSKYC |
M204.2756 |
NUMBUFG reset to NLRUQG * ((NSERVS + NSUBTKS) * MAXOBUF + 15) = token * ((token2 + token3) * token4 + 15) = token5 |
| M204.0761 |
ATRPG*ASTRPPG exceeds token |
M204.1721 |
IFSKYE |
M204.2757 |
Insufficient above-the-bar storage -- run terminated |
| M204.0762 |
Unnecessary sort/hash key ignored |
M204.1722 |
Parameter list expected |
M204.2758 |
MAXBUF+NUMBUFG can't exceed 2G |
| M204.0763 |
Begin initialization: file fileName |
M204.1723 |
token is illegal syntax in parameter list |
M204.2759 |
token not supported under CMS |
| M204.0764 |
End initialization: file fileName token |
M204.1724 |
"FS" or "Field Save" expected, not token |
M204.2760 |
token not allowed with NUMBUFG > 0 |
| M204.0765 |
Enter sort, hash, or record security key |
M204.1725 |
Parameter number num is type incompatible |
M204.2761 |
token detected - backout will follow |
| M204.0766 |
Type of key expected, not: token |
M204.1726 |
Parameter refers to undeclared list |
M204.2762 |
File fileName has no Table X defined. Parameter "TABLEX" not allowed. |
| M204.0767 |
Unnecessary sort/hash key rejected |
M204.1727 |
Reference to invalid subroutine name |
M204.2763 |
File fileName Table token total number of pages processed: token2 |
| M204.0768 |
Unnecessary record security key rejected |
M204.1728 |
Assignment to input parameter illegal |
M204.2764 |
File fileName Table token # of pages added to the reuse queue: token2 |
| M204.0769 |
File option not allowed from operator |
M204.1729 |
Duplicate type specification - token |
M204.2765 |
File fileName Table token reuse queue length before rebuild: token2 |
| M204.0770 |
Broadcast message not present |
M204.1730 |
List token already defined |
M204.2766 |
File fileName Table token # of pages that were on the reuse queue: token2 |
| M204.0771 |
"=" expected after field name |
M204.1731 |
Subroutine with parameters should not begin with a label |
M204.2767 |
File fileName Table token reuse queue length after rebuild: token2 |
| M204.0772 |
"(" expected after field name |
M204.1732 |
Parameter count is not equal to the original parameter count |
M204.2768 |
File fileName has no Table X pages |
| M204.0773 |
token name required |
M204.1733 |
Label token already defined |
M204.2769 |
File fileName has no TABLEX pages in use |
| M204.0774 |
No creates allowed during roll back |
M204.1734 |
Invalid use of array name as parameter |
M204.2770 |
File fileName parameter RECRDOPT=1 requires Table X to be defined. |
| M204.0775 |
No name given |
M204.1735 |
Type incompatibility between Common variables |
M204.2771 |
Attempt to update TBO and non-TBO files in the same transaction |
| M204.0776 |
tokentoken2token3 is an invalid option |
M204.1736 |
File/group incompatibility between Common lists |
M204.2772 |
File already at dynamic maximum |
| M204.0777 |
Reserved name used |
M204.1737 |
token token2 not opened for input |
M204.2773 |
The LPM will be too big |
| M204.0778 |
Device token not defined |
M204.1738 |
Image data truncated |
M204.2774 |
Another token command is in progress |
| M204.0779 |
Invalid DBCS data encountered |
M204.1739 |
Option token duplicates or conflicts with previous options |
M204.2775 |
Invalid expression in Initial clause |
| M204.0780 |
File already in use |
M204.1740 |
Image array must contain some items |
M204.2776 |
token scheduler abend, Model 204 terminating |
| M204.0781 |
No FILESAVE areas available |
M204.1741 |
"for" clause required |
M204.2777 |
token parameter reset to larger token2 = token3 |
| M204.0782 |
Begin creation: file fileName |
M204.1742 |
"for" clause conflicts with open type |
M204.2778 |
DB2THRD not zero but module ULDB is not linked. |
| M204.0783 |
Incorrect ddName list |
M204.1743 |
token token2 not found |
M204.2779 |
Undeclared variable in Initial clause |
| M204.0784 |
First ddName is not file name |
M204.1744 |
Close statement invalid for file or group |
M204.2780 |
Abend during initialization, Model 204 terminating |
| M204.0785 |
Duplicate ddNames |
M204.1745 |
Data sent has been truncated |
M204.2781 |
Gstatus must be G, L, spaces, or null |
| M204.0786 |
Specified user not active: token |
M204.1746 |
Missing process name |
M204.2782 |
XSIZE must be specified |
| M204.0787 |
Reading file parameters |
M204.1747 |
After position not valid with image |
M204.2783 |
Temp group does not match saved compilation, recompiling |
| M204.0788 |
Invalid parameter card |
M204.1748 |
Subsystem name required |
M204.2784 |
Ignoring commands, until Begin found |
| M204.0789 |
Sorted file parameters ignored |
M204.1749 |
Subsystem parameters lost, GTBL full, LGTBL=value |
M204.2785 |
Rewind invalid with stream configuration |
| M204.0790 |
File too big |
M204.1750 |
CCASYS missing field token |
M204.2786 |
CPQZSECS timer refreshed - expires in token seconds |
| M204.0791 |
An even length is required for pure DBCS |
M204.1751 |
Invalid alphanumeric edit pattern (token): missing "!" character |
M204.2787 |
Output incomplete: UDD lines output = count |
| M204.0792 |
Total table size too large |
M204.1752 |
Null alphanumeric edit pattern not allowed |
M204.2788 |
Ignoring commands, until Begin found |
| M204.0793 |
I/O error forced formatting |
M204.1753 |
Null numeric edit pattern not allowed |
M204.2789 |
Error executing Fast/Unload request for PGM=FUNLOAD: token |
| M204.0794 |
End file creation: token |
M204.1754 |
Invalid numeric edit pattern (token): illegal character |
M204.2790 |
Initial clause references uninitialized variable: token |
| M204.0795 |
Data type must be reset |
M204.1755 |
Invalid numeric edit pattern (token): missing $$,++,--,z,*,9 |
M204.2791 |
Initial clause ignored, Initial specified in previous Common declaration |
| M204.0796 |
ASIZE cannot exceed 16777216 |
M204.1756 |
Invalid numeric edit pattern (token): too many digits |
M204.2792 |
token token2 |
| M204.0797 |
BSIZE*BRECPPG exceeds maximum value |
M204.1757 |
Invalid numeric edit pattern (token): extra character(s) at end |
M204.2793 |
Initial must be specified in first Common declaration |
| M204.0798 |
File allocation not permitted during roll back pass 1 |
M204.1758 |
Invalid numeric edit pattern (token): "token2" in wrong position |
M204.2794 |
Journal block discrepancy. Expected block number is token, current block number is token2 |
| M204.0799 |
I/O error while formatting extent |
M204.1759 |
File fileName already being DUMPed |
M204.2795 |
Reserve keyword expected |
| M204.0800 |
Mixed DBCS screen items not supported on this device |
M204.1760 |
File fileName: token beginning at token2 |
M204.2796 |
SMTP token |
| M204.0801 |
CREATE command rejected |
M204.1761 |
File fileName: token completed at token2 |
M204.2797 |
Expected comma - found token |
| M204.0802 |
Direct file hash key feature used |
M204.1762 |
File fileName: token ended abnormally |
M204.2798 |
BLOB/CLOB field or FNV required |
| M204.0803 |
Invalid INCREASE amount |
M204.1763 |
Maximum parameter count exceeded |
M204.2799 |
$SndMail error token |
| M204.0804 |
Not enough free space |
M204.1764 |
Input/output incompatibility: parameter number token |
M204.2800 |
linePart1 >>token<< linePart3 |
| M204.0805 |
INCREASE makes file too big |
M204.1765 |
Subroutine name multiply defined |
M204.2801 |
line |
| M204.0806 |
ENQCTL invalid argument - token |
M204.1766 |
Duplicate DP specification - token |
M204.2802 |
line |
| M204.0807 |
File fileName Table token increased by token2 pages |
M204.1767 |
Null parameter list is illegal |
M204.2803 |
(File = fileName, procedure = procName, line = lineNo) |
| M204.0808 |
No ddNames given |
M204.1768 |
Null parameter is illegal |
M204.2804 |
linePart1 >>token<< linePart3 |
| M204.0809 |
sharedDASDentry |
M204.1769 |
Common/global is allowed only on first image |
M204.2805 |
line |
| M204.0810 |
Invalid command format |
M204.1770 |
Illegal label specified |
M204.2806 |
line |
| M204.0811 |
File datasets increased |
M204.1771 |
Expecting "Common" or "Global" not token |
M204.2807 |
(file = fileName, procedure = procName, line = lineNo) |
| M204.0812 |
INCREASE command rejected |
M204.1772 |
Duplicate Len specification - token |
M204.2808 |
BLOB/CLOB field not allowed |
| M204.0813 |
Printer SVC is not installed |
M204.1773 |
word not allowed following Declare |
M204.2809 |
File fileName wrong segment token for page token2 |
| M204.0814 |
Invalid DECREASE amount |
M204.1774 |
Replication file fileName must be TBO, and have roll forward and checkpoint logging enabled |
M204.2810 |
File fileName descriptor not found for object at token record number token2 |
| M204.0815 |
Not enough room in table |
M204.1775 |
Cannot use percent variable with file$ or list$ or location$ |
M204.2811 |
File fileName number of moved objects: token |
| M204.0816 |
INITIALIZE rejected for file with active procedure |
M204.1776 |
token not valid in an expression |
M204.2812 |
File fileName number of moved pages: token |
| M204.0817 |
File fileName Table token decreased by token2 pages |
M204.1777 |
Condition missing on Repeat While statement |
M204.2813 |
File fileName number of record locking conflicts: token |
| M204.0818 |
DECREASE command rejected |
M204.1778 |
INCREASE/DECREASE rejected for file with active procedure |
M204.2814 |
File fileName number of multisegment objects: token |
| M204.0819 |
FTBL full, LFTBL=value .. can't add GFT entry |
M204.1779 |
Return invalid in On units, use Bypass statement |
M204.2815 |
File fileName total number of gaps: token |
| M204.0820 |
In sorted files BPGPMSTR and BPGPOVFL must be between 1 and 32767 |
M204.1780 |
Word "Times" required on Repeat n Times statement |
M204.2816 |
File fileName total gap size: token |
| M204.0821 |
Group file closed: name |
M204.1781 |
Invalid condition on Repeat While statement |
M204.2817 |
File fileName segment: token number of gaps: token2 total gap size: token3 |
| M204.0822 |
Can't close group because of active procedure |
M204.1782 |
Active procedure - file fileName not restored |
M204.2818 |
File fileName record token has no field pointing to object at token2 |
| M204.0823 |
token has been defined as a stream - streams are not currently supported by this function |
M204.1783 |
token is now an alias of token2 |
M204.2819 |
File fileName record token not found for object at token2 |
| M204.0824 |
Permanent groups not available |
M204.1784 |
Invalid process-to-process status code |
M204.2820 |
File fileName discrepancy found for token page token2 |
| M204.0825 |
Reading group parameters |
M204.1785 |
Data received has been truncated |
M204.2821 |
File fileName object at hexValue stretches past EHIGHPG |
| M204.0826 |
Invalid parameter line, command rejected |
M204.1786 |
Process-to-process not supported on this thread |
M204.2822 |
Compaction ends abnormally. File fileName has to be recovered |
| M204.0827 |
Invalid parameter, command rejected: parameter |
M204.1787 |
The defined process-to-process buffer size is too large |
M204.2823 |
File fileName bug token during object move |
| M204.0828 |
Temp group created: name |
M204.1788 |
Unable to allocate necessary process-to-process data areas |
M204.2824 |
Bug .. DKFPE: no object found |
| M204.0829 |
Group is in use |
M204.1789 |
Invalid process-to-process message |
M204.2825 |
COMPACTB and COMPACTE may not be run at the same time |
| M204.0830 |
Perm group created: name |
M204.1790 |
CLOSE for Link linkName failed |
M204.2826 |
File fileName token compaction not allowed |
| M204.0831 |
Missing FROM clause, CREATE rejected |
M204.1791 |
Partner process will not accept defined PROTOCOL, MODE, or TERMINAL |
M204.2827 |
Bug .. DKFPE: different record number |
| M204.0832 |
Too many files, CREATE rejected |
M204.1792 |
Odd length not allowed for String DBCS field |
M204.2828 |
Bug .. DKFPE: different attribute |
| M204.0833 |
Duplicate files "token" : token2 rejected |
M204.1793 |
Partner process is not active |
M204.2829 |
Reorganize file fileName to improve efficiency for Table E allocation |
| M204.0834 |
Update file must be group member |
M204.1794 |
Invalid action option option, Synclevel assumed |
M204.2830 |
Unable to allocate SDASDENQ work area - more entries exist |
| M204.0835 |
cntrlBlock not allocated |
M204.1795 |
token function requires scattered group context |
M204.2831 |
Updates to DTS files not supported in this environment |
| M204.0836 |
CCAGRP already exists |
M204.1796 |
Process-to-process communications link has been closed |
M204.2832 |
USE PROC active for procedure |
| M204.0837 |
VTAM token interface is closing |
M204.1797 |
token clause required for token2 statement for this link type |
M204.2833 |
token fields cannot be defined in a file with ATRPG*ASTRPPG>4000 |
| M204.0838 |
VTAM token interface has been closed forever |
M204.1798 |
Shadow group open failure |
M204.2834 |
Address lookup failed for token |
| M204.0839 |
CCAGRP dataset too small |
M204.1799 |
Shadow group communication failure |
M204.2835 |
File fileName Table token increased by token2 pages automatically |
| M204.0840 |
Disk I/O error while formatting |
M204.1800 |
Shadow group token has been opened for scattered group token2 at client node token3 |
M204.2836 |
Value of parameter token invalid - reset to token2 |
| M204.0841 |
Bug .. CCAGRP already in directory |
M204.1801 |
token function index out of range |
M204.2837 |
No logical connection between process token and remoteid token2 |
| M204.0842 |
CREATEG command rejected |
M204.1802 |
Transaction token has been backed out on remote node token2 |
M204.2838 |
token only valid in FILEORG x'100' files |
| M204.0843 |
token |
M204.1803 |
No inbound threads allocated |
M204.2839 |
token is a token2, not a token3 |
| M204.0844 |
Recovery is now complete |
M204.1804 |
Insufficient CSA storage for cross-memory control block allocation |
M204.2840 |
Statement has too many intermediate results |
| M204.0845 |
Updates not allowed during recovery |
M204.1805 |
Error initializing cross-memory environment |
M204.2841 |
Remote fieldgroups not supported |
| M204.0846 |
Group is in use |
M204.1806 |
Process not defined for transfer |
M204.2842 |
Invalid context for fieldgroup |
| M204.0847 |
Close group before deleting |
M204.1807 |
Invalid Open: process not defined as master |
M204.2843 |
Maximum fieldgroup ID exceeded in record recNum in file fileName |
| M204.0848 |
Perm group deleted: name |
M204.1808 |
Error in executing Transfer statement |
M204.2844 |
Mix of fields and fieldgroups, name = fieldName |
| M204.0849 |
Group not found: name |
M204.1809 |
Receive into input parameter is illegal |
M204.2845 |
Invalid fieldgroup context for name |
| M204.0850 |
Bug .. FSPUT - output page buffer overflow |
M204.1810 |
Open for link token failed |
M204.2846 |
Invalid fieldgroup context for name |
| M204.0851 |
Temp group deleted: name |
M204.1811 |
User language statement is not supported for this link type |
M204.2847 |
Fieldgroup context lost in record recNum in file fileName |
| M204.0852 |
Bug .. GRDOGT |
M204.1812 |
Proc file must be group member or * |
M204.2848 |
Invalid fieldgroup ID: token |
| M204.0853 |
Invalid DISPLAY option |
M204.1813 |
Command not allowed in PROCFILE=* context |
M204.2849 |
Required keyword token missing |
| M204.0854 |
Procedure cannot redefine included procedure |
M204.1814 |
Proc located in file token |
M204.2850 |
token value missing |
| M204.0855 |
CCAGRP is being recovered and can't be displayed |
M204.1815 |
Temp group token does not match numlock perm files-not logged into token2 |
M204.2851 |
token value 'token2' too big, must be bytes |
| M204.0856 |
Undefined group name ignored: name |
M204.1816 |
Procedure token already exists -- specify "replace" |
M204.2852 |
Update to missing fieldgroup occurrence in record recNum in file fileName |
| M204.0857 |
Group left open with old privileges |
M204.1817 |
CMS external security interface disabled - not running in CMS |
M204.2853 |
token not allowed for EXACTLY-ONE field |
| M204.0858 |
Group name/extraInfo |
M204.1818 |
Error initializing CMS external security |
M204.2854 |
Attempt to do operation for EXACTLY-ONE field: fieldname |
| M204.0859 |
Perm groups are not available during recovery |
M204.1819 |
Error initializing PST for CMS external security |
M204.2855 |
Field depth+length unrepresentable in record recNum in file fileName |
| M204.0860 |
Open group limit (NGROUP) exceeded |
M204.1820 |
Unexpected IUCV interrupt type token |
M204.2856 |
Fieldname variable fieldname: expected token, got token2 |
| M204.0861 |
FTBL full, LFTBL=value can't open group |
M204.1821 |
CMS external security terminating due to error |
M204.2857 |
COUNT-OCCURRENCES-OF field not allowed for attribute field |
| M204.0862 |
Opening file: name |
M204.1822 |
token error in routine token2 function token3 return code token4 reason code token5 |
M204.2858 |
Fieldgroup context mismatch between COUNT-OCCURRENCES-OF field and counted field |
| M204.0863 |
Group open failed, files left open |
M204.1823 |
Security error in routine token return code token2 |
M204.2859 |
New attribute field not allowed for non-empty file |
| M204.0864 |
Group open failed, closing partial group |
M204.1824 |
token error msg token2 - see token3 messages manual |
M204.2860 |
Field token already has a COUNT-OCCURRENCES-OF field |
| M204.0865 |
IFSORT |
M204.1825 |
token informational message token2 - see token3 messages manual |
M204.2861 |
Occurrence counter fieldname overflowed |
| M204.0866 |
IFSRTC |
M204.1826 |
Member token of parallel stream token2 has token3 records |
M204.2862 |
Attempt to update automatic field fieldName |
| M204.0867 |
IFSRTE |
M204.1827 |
Open failed for member token of parallel stream token2 |
M204.2863 |
Attempt to do operation for automatic field: fieldname |
| M204.0868 |
Group already exists |
M204.1828 |
ORDERED field referenced, no variable length deferred update dataset supplied |
M204.2864 |
Full search of ordered index performed for field: token |
| M204.0869 |
CCAGRP security transformed |
M204.1829 |
Invalid VL parameter specified |
M204.2865 |
Attempt to modify invalid DATETIME value: fieldname = value |
| M204.0870 |
Current function not allowed with sorted record/set |
M204.1830 |
Opening offload member of token stream |
M204.2866 |
File already has token field |
| M204.0871 |
IFSTRT (IFAM/II) jobname |
M204.1831 |
Invalid value specified for Signal |
M204.2867 |
Fieldgroup token already has token2 field |
| M204.0872 |
IFOPEN |
M204.1832 |
File skewed for different device type, file: token |
M204.2868 |
MINLOBE must be between 0 and token |
| M204.0873 |
IFCLOSE |
M204.1833 |
The total number of property entries is token |
M204.2869 |
Change refused: MINLOBE > 0 for file fileName field token |
| M204.0874 |
IFFINDC/IFFNDXC/IFFACC |
M204.1834 |
token primary property entries have overflow |
M204.2870 |
Change refused: MINLOBE > 0 for file fileName field token |
| M204.0875 |
Compilation name required |
M204.1835 |
SCOPE=SYSTEM is assumed for token |
M204.2871 |
Fieldgroup context mismatch between CONCATENATION-OF field and component field |
| M204.0876 |
IFFINDE |
M204.1836 |
Ring stream token created with token2 members, DEFINE specified token3 members |
M204.2872 |
Concatenation value too long for field token |
| M204.0877 |
IFFNDXE |
M204.1837 |
No records found on control stream for ring stream token |
M204.2873 |
Concatenation field token component field token2 contains separator character |
| M204.0878 |
IFFIND/IFFNDX |
M204.1838 |
Offload disabled for ring stream token due to token2 error on token3 stream token4 |
M204.2874 |
Attempt to modification a value that's constraintFailure: fieldname = value |
| M204.0879 |
Wrong compilation type |
M204.1839 |
Offload PST for ring stream token failed to initialize |
M204.2875 |
Concatenation list invalid: reason |
| M204.0880 |
IFFIND COMPLETE |
M204.1840 |
All members of ring stream token are full. Waiting for available member |
M204.2876 |
Invalid constraintType value: value |
| M204.0881 |
IFCOUNT = token |
M204.1841 |
token hardware feature required for token2 |
M204.2877 |
With clause invalid: reason |
| M204.0882 |
IFGETC/IFMOREC/IFPUTC |
M204.1842 |
I/O error detected on token stream token2 due to error on token3 token4 |
M204.2878 |
With clause invalid: field fieldname in file fileName reason |
| M204.0883 |
IFCTOC |
M204.1843 |
Autooffload value must be less than the number of ring members |
M204.2879 |
Remote ID id mode logmode |
| M204.0884 |
IFGETE/IFGETXE |
M204.1844 |
Time specified exceeds 24 hours |
M204.2880 |
Memory datasets cannot be part of multi-dataset file |
| M204.0885 |
IFMOREE/IFMORXE |
M204.1845 |
token of concatenated stream token2 failed |
M204.2881 |
Data conversion error |
| M204.0886 |
IFMORE/IFMOREX |
M204.1846 |
Member token of token2 stream token3 now active token4 |
M204.2882 |
Recovery journal (CCARF) version token is not supported |
| M204.0887 |
IFGET(X) |
M204.1847 |
Syntax error, token command rejected |
M204.2883 |
Mix of journal versions in recovery CCARF |
| M204.0888 |
IFCTOE |
M204.1848 |
token is an invalid token2 name |
M204.2884 |
token was previously defined as a token2, new definition ignored |
| M204.0889 |
IFFLUSH |
M204.1849 |
Unable to allocate sufficient storage for work area, COPY command rejected |
M204.2885 |
Invalid fieldgroup ID: token |
| M204.0890 |
Syntax error: token token2 |
M204.1850 |
Nothing to be copied, COPY command failed |
M204.2886 |
Fieldgroup ID token already exists in record recNum in file fileName |
| M204.0891 |
IFLIST |
M204.1851 |
Unable to open ddName stream, COPY command failed |
M204.2887 |
ABANDON option invalid for this type of link |
| M204.0892 |
IFPROL |
M204.1852 |
End of data action on input, COPY command status |
M204.2888 |
Link flags hexValue locks held hexValue2 remote partner token |
| M204.0893 |
IFRRFL |
M204.1853 |
I/O error on ddName, COPY command failed |
M204.2889 |
User token no token2 session abandoned for link token3 |
| M204.0894 |
IFRPRM |
M204.1854 |
File full condition on output, COPY command failed |
M204.2890 |
Link token closed normally; it can be re-opened |
| M204.0895 |
IFEPRM |
M204.1855 |
Stream ddName is not a ring, or does not exist, command rejected |
M204.2891 |
Link linkName subtask waiting on ECB hexValue RPL hexValue2 |
| M204.0896 |
Invalid parameter |
M204.1856 |
Stream to be tokened is not opened for output, command rejected |
M204.2892 |
SQEDS in chain elementCount last one is hexValue |
| M204.0897 |
IFEPRM - result too long |
M204.1857 |
Offload failed |
M204.2893 |
'token' is not a valid option for the OPEN LINK command |
| M204.0898 |
IFDISP |
M204.1858 |
COPY command completed |
M204.2894 |
Link token cannot be replaced - it is not a VTAM LU 6.2 link |
| M204.0899 |
IFFNSH |
M204.1859 |
token blocks have been copied to output stream/dataset |
M204.2895 |
Link token has not been abandoned, is open, or was closed ok |
| M204.0900 |
IFLOG |
M204.1860 |
Second argument to $View invalid with CURFILE |
M204.2896 |
Link token has replaced link token2 |
| M204.0901 |
IFPOINT |
M204.1861 |
Invalid DBCS escape in input stream: x'hexValue' |
M204.2897 |
token token2 now uses link token3 |
| M204.0902 |
IFCTO |
M204.1862 |
Insufficient length for String Mixed DBCS field |
M204.2898 |
Print To not supported for LOB fields |
| M204.0903 |
token - result too long |
M204.1863 |
$stat arg "token" is not a valid user statistic name |
M204.2899 |
Remote fieldgroup updates not supported |
| M204.0904 |
EDIT_SPEC syntax error |
M204.1864 |
ORDERED field referenced, no VL specified on FILELOAD command |
M204.2900 |
Cannot delete token that token2 |
| M204.0905 |
Value too long for STBL, LSTBL=value |
M204.1865 |
Cross-memory options are not supported in this environment |
M204.2901 |
**Fix is available for problem** FOPT=x'10' (dts) is not supported during FLOD/FILELOAD |
| M204.0906 |
Unknown specification type |
M204.1866 |
I/O error occurred while token CCASTAT dataset |
M204.2902 |
ECTG supported; XMEMOPT reset from x'hexValue' to x'hexValue2' |
| M204.0907 |
IFAM job too long -- QTBL, LQTBL=value |
M204.1867 |
Unable to reposition the CCASTAT dataset to the beginning of the dataset |
M204.2903 |
FILEORG=x'100' is not supported during FLOD/FILELOAD |
| M204.0908 |
Name list syntax error |
M204.1868 |
$stat type "token" is not a valid statistic type |
M204.2904 |
Insufficient CCATEMP pages for backout data |
| M204.0909 |
Argument passed to $SETL is out of range: value = token |
M204.1869 |
Invalid argument supplied to $hex |
M204.2905 |
IBM system interface macro token warning, return code = hexValue, reason code = hexValue2 |
| M204.0910 |
Illegal subscript |
M204.1870 |
Second attempt to identify array or item size is invalid |
M204.2906 |
IEANTCR cannot be loaded - code token rc token2 |
| M204.0911 |
Field or variable name list too long - QTBL, LQTBL=value |
M204.1871 |
The percentage of property entries with overflow is token |
M204.2907 |
Link token rejected accept: sockaddr is hexValue |
| M204.0912 |
Extra ) |
M204.1872 |
File fileName is on a read-only device |
M204.2908 |
Processgroup not found for remote token |
| M204.0913 |
IFFIND errors |
M204.1873 |
DBCS parameter cannot be reset when DBCSENV=0 |
M204.2909 |
IEANTDL return code token - name/token not deleted |
| M204.0914 |
End IFFIND |
M204.1874 |
The number of pages with spills is token |
M204.2910 |
IEANTDL cannot be loaded - code token rc token2 |
| M204.0915 |
Upcase is invalid with DBCS data types |
M204.1875 |
Unable to reset MODEL to token |
M204.2911 |
Attempted connect from processgroup token to IPV6 server token2, but link token3 is IPV4 |
| M204.0916 |
IFAM job too long -- VTBL, LVTBL=value |
M204.1876 |
NJBUFF not resettable under z/VSE, NJBUFF=1 assumed |
M204.2912 |
IEANTCR return code token - name/token not created |
| M204.0917 |
IFAM job too long -- NTBL, LNTBL=value |
M204.1877 |
token token2 started |
M204.2913 |
"new" option requires single user run |
| M204.0918 |
Undefined compilation |
M204.1878 |
token token2 stopped |
M204.2914 |
CCASERVR in memory is required for token |
| M204.0919 |
$enter fixed point value incorrect |
M204.1879 |
token token2 was not stopped |
M204.2915 |
IGNORE specified for file token token2 |
| M204.0920 |
Value or name list syntax error |
M204.1880 |
token token2 was not started |
M204.2916 |
sizeParameter requires at least one area to be set in tablesParameter |
| M204.0921 |
No message specified |
M204.1881 |
Too many signals received on session |
M204.2917 |
Server dataset token is allocated above 64k cyl. Servers above 64k cyl are not supported. |
| M204.0922 |
Invalid language code |
M204.1882 |
Invalid value specified for timeout |
M204.2918 |
Parameter SERVNSSZ is only valid when servers in memory are used |
| M204.0923 |
Invalid string argument |
M204.1883 |
token value cannot be changed for this processgroup |
M204.2919 |
HWM MBYTES ATB storage allocated = token |
| M204.0924 |
IFINIT |
M204.1884 |
token token2 is not operational |
M204.2920 |
Non-zero token is required |
| M204.0925 |
Function requires file context |
M204.1885 |
token |
M204.2921 |
Server areas above the bar are not supported in VSE |
| M204.0926 |
Function requires file manager privilege |
M204.1886 |
token |
M204.2922 |
token bit setting is not valid |
| M204.0927 |
IFDFLD |
M204.1887 |
token |
M204.2923 |
Increase SERVNSSZ to at least token for required non swappable server areas |
| M204.0928 |
IFDFLD requires file context |
M204.1888 |
token token2 token3 token4 hexValue hexValue2 |
M204.2924 |
SERVNSSZ/SERVNSA reset: server swap inactive (NUSERS=NSERVS) |
| M204.0929 |
IFRFLD/IFNFLD/IFDELF |
M204.1889 |
token token2 hexValue hexValue2 hexValue3 |
M204.2925 |
HWM MBytes storage allocated with 1 MB pages = token |
| M204.0930 |
Requires subsystem command privilege |
M204.1890 |
Number of write buffer waits - token |
M204.2926 |
1 MB page feature is not available. Parameter ZPAGEOPT is reset to zero. |
| M204.0931 |
Unable to allocate subsystem control block |
M204.1891 |
Write buffer high watermark - token |
M204.2927 |
token token2 hexValue token3 token4 token5 token6 hexValue2 token7 token8 |
| M204.0932 |
IFBREC |
M204.1892 |
Number of CLSDST waits - token |
M204.2928 |
Maximum socket used on TCP/IP link token was token2 |
| M204.0933 |
Unexpected end-of-procedure during request compilation. Type 'END NORUN' to cancel. |
M204.1893 |
Number of RESPONSE waits - token |
M204.2929 |
Can't open file with UTF fields without Sirius unicode support |
| M204.0934 |
Procedure tried to define procedure procName but failed |
M204.1894 |
Parallel stream token member token2 record token3 token4 contains x'hexValue' in position token5 |
M204.2930 |
Unable to allocate storage object for token |
| M204.0935 |
IFDREC |
M204.1895 |
Number of OPNDST waits - token |
M204.2931 |
Operating system does not support token |
| M204.0936 |
IFPUTE |
M204.1896 |
Number of storage short retries - token |
M204.2932 |
Increase SERVNSSZ to at least token for required non swappable server areas |
| M204.0937 |
IFPUT |
M204.1897 |
Link token opened |
M204.2933 |
Module version mismatch, KOMM=token, token2=token3 |
| M204.0938 |
Fatal record locking table inconsistency |
M204.1898 |
Link token token2 closed |
M204.2934 |
FILEORG X'200' not supported for hashed or sorted file organizations |
| M204.0939 |
= required, not token |
M204.1899 |
Transfer statement from sourceVtamName to targetVtamName complete, User userId disconnected |
M204.2935 |
token fields may not be RENAMED or DELETED |
| M204.0940 |
IFDSET |
M204.1900 |
User userId transferred to targetVtamName from sourceVtamName |
M204.2936 |
A CHUNK field of size token already exists for this field |
| M204.0941 |
IFDVAL |
M204.1901 |
Location name expected after AT, not a comma |
M204.2937 |
CHUNK size: token is not an integral multiple/divisor of the existing CHUNK size: token2 |
| M204.0942 |
IFFILE |
M204.1902 |
Location name expected after AT, not end of line |
M204.2938 |
You may not define more than token CHUNKS for a field |
| M204.0943 |
Syntax error -- IFFILE |
M204.1903 |
item exceeds max characters in length |
M204.2939 |
token has been set to its token2 value: token3 |
| M204.0944 |
Nonexistent record referenced in file fileName |
M204.1904 |
Invalid option option, must be OPTIONAL, MANDATORY, OPT or MAND |
M204.2940 |
Attempt to use filename (string) after INITIALIZE keyword disallowed because it is misleading |
| M204.0945 |
Record security violation |
M204.1905 |
Missing ) after file option |
M204.2941 |
File being initialized (file fileName) does not match name given after INITIALIZE command: string |
| M204.0946 |
Invalid file specification |
M204.1906 |
BLDGFT=YES not allowed on scattered group |
M204.2942 |
Extraneous string after field attribute list: string |
| M204.0947 |
No current record |
M204.1907 |
PROCFILE=* not allowed on scattered group |
M204.2943 |
Error using filename phrase for file string: FILE keyword required |
| M204.0948 |
Max Pfkey must be greater than 0 |
M204.1908 |
PROCFILE may not be remote |
M204.2944 |
Should have end of INITIALIZE command but instead found: token |
| M204.0949 |
Duplicate Max Pfkey rejected |
M204.1909 |
Location name is required |
M204.2945 |
Error(s) encountered, token command not performed |
| M204.0950 |
At Column + Len must not exceed token |
M204.1910 |
MAXFAIL greater than number of optional files |
M204.2946 |
Error(s) encountered, token command not performed |
| M204.0951 |
Undefined field token |
M204.1911 |
Invalid MAXFAIL specification, must be * or number <= count of optional files |
M204.2947 |
Module address hexValue length hexValue2 protected successfully |
| M204.0952 |
Specified access not allowed for field token |
M204.1912 |
MAXFAIL may only be specified on groups with optional members |
M204.2948 |
Setting of 1 in SIRFUNC is required for zIIP usage when FUNDLE is linked in |
| M204.0953 |
Invalid access string token |
M204.1913 |
Reopen only valid on group that was previously opened |
M204.2949 |
Expecting token on token2 command, found: 'token3' |
| M204.0954 |
IFAM2 initialized, threads = count |
M204.1914 |
Opening remote file token at token2 |
M204.2950 |
IODEV 25 line not allowed with FUNTSKN > 0 |
| M204.0955 |
IFAM2 CRAM open error RC=token, IFAM halted - channel = chanName |
M204.1915 |
Group open error: mandatory file token at token2 could not be opened |
M204.2951 |
command is obsoleteaddedInfo |
| M204.0956 |
Serious CRAM error, thread halted: error code = errorCode |
M204.1916 |
Group open error: more than MAXFAIL optional files could not be opened |
M204.2952 |
Auto-defining token IODEV 25 (FUSI) threads |
| M204.0957 |
IFAM batch job died, thread released for jobname |
M204.1917 |
Group open warning: optional file token at token2 not open(ed) and marked unavailable |
M204.2953 |
File token token2 zHPF capabilities hexValue hexValue2 hexValue3 Supported: token3 |
| M204.0958 |
Forced logout of IFAM thread for job jobname |
M204.1918 |
Group open warning: local files cannot be optional. OPTIONAL ignored for: fileName |
M204.2954 |
Feature token not supported |
| M204.0959 |
Release 5 IFIF, call rejected for: jobname |
M204.1919 |
Too many locations in scattered group |
M204.2955 |
Universal buffer allocation failed. |
| M204.0960 |
Apparent restart loop, thread halted after nn |
M204.1920 |
File fileName - RPRA entry not initialized |
M204.2956 |
File token is in-memory file |
| M204.0961 |
Unable to force signon checkpoint for job jobname |
M204.1921 |
Global lists/foundsets invalid in ad hoc group context |
M204.2957 |
Error hexValue opening stream token for Janus Web port token2 |
| M204.0962 |
Sign on, job name = jobname |
M204.1922 |
CFRJRNL set to 0 because CFRLOOK=0 |
M204.2958 |
APSYPAGE is obsolete as of 7.6. Rocket recommends using RESPAGE and/or TEMPPAGE as the alternative |
| M204.0963 |
Sign off, job name = jobname |
M204.1923 |
CFRLOOK set to 0, statistics not being collected |
M204.2959 |
Invalid product keyword: token |
| M204.0964 |
Unable to force signoff checkpoint for job jobname |
M204.1924 |
token function requires group context |
M204.2960 |
Initialized interface for token token2 |
| M204.0965 |
Thread logout - IFFNSH or IFDTHRD (IFAM2) |
M204.1925 |
token option requires token2 |
M204.2961 |
Missing end "/" in PGM=FUNLOAD PARM |
| M204.0966 |
IFAM2 termination. shutdownMessage |
M204.1926 |
Bad replication record operation : token |
M204.2962 |
M204Params between "/../" in PGM=FUNLOAD PARM= exceeds token characters |
| M204.0967 |
Can't ask for a checkpoint without a wait |
M204.1927 |
The initial 'by' value or direction parameter must be positive |
M204.2963 |
PGM=FUNLOAD user zero parameters: |
| M204.0968 |
IFCHKPT -- checkpoint request |
M204.1928 |
Link token is not open |
M204.2964 |
Password missing or too long |
| M204.0969 |
IFCHKPT -- checkpoint waiting |
M204.1929 |
Number of users = token, number of compactions = token2 |
M204.2965 |
Unable to cleanly close log file(s) |
| M204.0970 |
IFCHKPC |
M204.1930 |
Current # bytes = token, HWM # bytes = token2 |
M204.2966 |
what line number, procedure proc in file file |
| M204.0971 |
M204 is not in full operation yet, call rejected for: jobname |
M204.1931 |
Current # headers = token, HWM headers = token2 |
M204.2967 |
what line number of command level program |
| M204.0972 |
IFAM2 master ICB not open |
M204.1932 |
Required LRETBL = bytes |
M204.2968 |
what: no debug info |
| M204.0973 |
IFAM2 not drained, IFAMCLOSE not allowed |
M204.1933 |
Uniqueness violation during Store Record in a non-TBO file |
M204.2969 |
MBSCAN (mbscan) exceeded, records to be searched = number |
| M204.0974 |
IFAM2 not initialized in this run |
M204.1934 |
File fileName has field-level constraints defined moreInfo |
M204.2970 |
Maximum call stack limit (limit) reached |
| M204.0975 |
IFAM2 not active |
M204.1935 |
UNIQUE fields are not allowed in non-TBO files |
M204.2971 |
No 2PC ports named token with coordinators named token2 defined |
| M204.0976 |
IFAM2 drained |
M204.1936 |
Missing bracket for incoming signal |
M204.2972 |
Warning SIRTERM X'02' bit not set - WSF Query not supported |
| M204.0977 |
IFAM2 drain in progress, active threads= nn |
M204.1937 |
token token2 is not open |
M204.2973 |
Unable to reset Model to token: token2 |
| M204.0978 |
Invalid channel type - name |
M204.1938 |
Request for space in Table E extends beyond EHIGHPG, bit map pages are scanned for freespace |
M204.2974 |
Action disabled by commit exit |
| M204.0979 |
No threads are active |
M204.1939 |
Number of ddName blocks written = num |
M204.2975 |
token connection to host token2token3token4 port number token5 using Janus 2PC port token6 |
| M204.0980 |
Invalid thread number- nn |
M204.1940 |
Procedure file does not match subsysmgmt specification |
M204.2976 |
Attempt to update non-TBO file in a global transaction |
| M204.0981 |
Specified thread is not active - threadNum |
M204.1941 |
New LFTBL must be at least token, files must be closed |
M204.2977 |
Global transaction error: token |
| M204.0982 |
No threads defined for IFAM2 channel nn |
M204.1942 |
Subsystem subsysName started without in-core procedure dictionary |
M204.2978 |
Implicit commit of global transaction failed |
| M204.0983 |
IFAM2 already halted |
M204.1943 |
token requires a string percent variable |
M204.2979 |
There were errors before RESTART |
| M204.0984 |
Conflicting attribute rejected: token |
M204.1944 |
IUCV connection with security machine severed |
M204.2980 |
ddname -- Start: hexValue, Offset: hexValue2 |
| M204.0985 |
Thread halted, or halt pending - threadNum |
M204.1945 |
IUCV reply error - IPAUDIT = hexValue |
M204.2981 |
RETLIM exceeded - Current: token; Needed: token2 |
| M204.0986 |
Default cursor column must be between 1 and 80 |
M204.1946 |
Test or Debug privileges required when temp group used as procfile |
M204.2982 |
===> token starting regex scan at token2token3 |
| M204.0987 |
IFAM2 master icb not closed |
M204.1947 |
Account and Profile cannot both be specified |
M204.2983 |
Regex tracing stopped -- MREGEXTR (token) exceeded |
| M204.0988 |
Default cursor row must be between 1 and end of screen |
M204.1948 |
Open Process must run within a subsystem |
M204.2984 |
tokentoken2Atoken3 (token4), pos: token5, string pos: token6 |
| M204.0989 |
IFAM2 master ICB not open, IFAMSTART impossible |
M204.1949 |
'OPEN' must be specified on DEFINE command |
M204.2988 |
VTAM transfer failed, Session Parameters(LOGMODE, Cryptography, or VPACING) are invalid |
| M204.0990 |
Thread not started, halted due to restart loop - threadNum |
M204.1950 |
Password must be specified |
M204.3026 |
TPN: token Requesting User: token2 |
| M204.0991 |
Else incorrectly paired with If |
M204.1951 |
Security violation |
M204.3027 |
Source was token |
| M204.0992 |
File fileName, float transform already completed, command ignored |
M204.1952 |
SESPARMS entity not supported |
M204.3051 |
token token2 not found |
| M204.0993 |
File fileName, float transform completed |
M204.1953 |
Type of 'open process' conflicts with type of process definition |
M204.3052 |
token not found for PROCESS token2 |